On 6/15/06, Chuck Robey [EMAIL PROTECTED] wrote:
Greg Barniskis wrote:
Chuck Robey wrote:
docs, because then no one else would be able to use my documents. Am I
wrong in considering the FDP generated documentation as being in that
category, not terribly uselful outside the FreeBSD project.
Mac Newbold wrote:
Today at 2:55pm, Mikhail Goriachev said:
Jun 14 11:27:21 mybox kernel: acd0: FAILURE - READ_CD HARDWARE ERROR
asc=0x08 ascq=0x01 error=0
Jun 14 11:27:21 mybox kernel: acd0: FAILURE - READ_CD ILLEGAL REQUEST
asc=0x64 ascq=0x00 error=0
Jun 14 11:27:22 mybox last message
Hi,
Thanks for all your comments everyone.
The FreeBSD version 6.1 was downloaded (ISO image) from the production
release page (some mirror site).
My PC is a Pentium 4 (915G) , 512MB sdram, 128MB video memory, Maxtor SATA
HDD, OS - (Windows (C:), Linux (/,swap), BSD(/,swap,tmp,var,usr).
Mike Sacauskis wrote:
Hi
I'm trying to install mambo on a 5.4 release. I'm running into a
problem with the mambo editor. I've traced it to an error in the apache
log:
/libexec/ld-elf.so.1: /usr/local/lib/php/20020429/xml.so: Undefined
symbol php_XML_ParserCreate
Hello Mike,
I have
David Landgren wrote:
Mike Sacauskis wrote:
Hi
I'm trying to install mambo on a 5.4 release. I'm running into a
problem with the mambo editor. I've traced it to an error in the
apache log:
/libexec/ld-elf.so.1: /usr/local/lib/php/20020429/xml.so: Undefined
symbol php_XML_ParserCreate
Hi all,
specially for the novice of you, please read carefully
!!
OK, this is a the step-by-step GUIDE to do a
FreeBSD-RELENG-upgrade + BUILDWORLD process, using
CVSUP
I have seen a lot of buildworld questions, and even
more tips, on this news-group and now, finally I
provide my GUIDE for all
Here goes a newbie question about classical FFS (without
softupdates).
As metadata is updated synchronously, can an i-node, at some
point, end pointing to not written yet data blocks? Is this a
security risk, i.e., can those pointed to data blocks pertain to
another user's deleted on memory but
I am unable to get the sound card working with the Intel D101GGC mother
board.
One more issue is the X runs fine with vesa driver, but the screen
becomes white if I use 'ati' driver.
Any idea?
Thanks.
--T. Muthu Mohan
___
Chuck Robey wrote:
[ ... ]
You know, I don't want to argue about thread hijacking, I only want my
question answered, so i will try again. Has anyone out there used a
tool from the ports set, to be able to do general purpose creation and
formatting of XML Docbook documents?
Yes. It's
Hi,
Where is the location of 'squid_redirect' for adzap in
freebsd?
On Windows I can locate it.
Regards
__
Yahoo! India Answers: Share what you know. Learn something new
http://in.answers.yahoo.com/
After a hacker got on my server I can't gather mail by pop I get a password
error even though I log on as root and use passwd to change passwords I
subscribed to freebsd hackers mailing list but when I try to log on I get
roster authentication error The hacker also sent out 250,000 emails each
On Mon, 2006-06-12 at 02:10 -0300, Marc G. Fournier wrote:
Does anyone know if there is one somewhere for FreeBSD 6.x? Intel's site
only has a 4.1 version that I can find ...
If not, what is the best method of connecting to and looking at an IIR
controller with FreeBSD 6.x?
Archive
trying to install freebsd 6.1 on a hp dc7100 (p4 3.4, sata, a pci-x slot,
etc). im having a couple issues getting it up and running with freebsd.
main issue is, i cannot get the system to power off with acpi. it will
shutdown, but it stops at a screen that just says the system has powered
off
Can anybody tell me how to configure the multicast groups my computer will
attempt to join? I when my computers boot, I can see a IGMP join request for
224.0.0.9, but I would like to add more.
Any suggestions?
Rich Mayo
SRI International
x76435
After a hacker got on my server pop passwords are no longer working I tried
deleting and re-adding popa3d but it didn't help Of course this is very big
problem for me Anyone can help?
_
Express yourself instantly with MSN
You should first verify your pop daemon is running, either from inet or on
boot. What errors are you getting?
-Derek
At 08:36 AM 6/16/2006, Scott Kaplan wrote:
After a hacker got on my server pop passwords are no longer working I
tried deleting and re-adding popa3d but it didn't
On Wed, Jun 14, 2006 at 08:16:32AM -0400, Christopher Sean Hilton wrote:
I'm wondering if anyone else is having trouble with the combination
between Kismet and the Orinoco Gold card. This setup worked flawlessly
for me under FreeBSD 5.4 (I retested it last night) but I get no joy
with FreeBSD
It seems that most of the new MBs with the
Blackford chipset use the 82563EB dual gig intel
controller. Is there support forthcoming for the
controller? Has anyone tested with a blackford MB
yet?
DT
__
Do You Yahoo!?
Tired of spam? Yahoo! Mail has
I haven't worked with multicast much, but from my understanding you
may have to join the router to the multicast domain.
On 6/15/06, Mayo, Richard A RDECOM CERDEC STCD SRI
[EMAIL PROTECTED] wrote:
I believe this is a simple fix, but I sure can't find it.
I set up 2 FreeBSD boxes as dual-stack
Are you running mrouted?
--- Atom Powers [EMAIL PROTECTED] wrote:
I haven't worked with multicast much, but from
my understanding you
may have to join the router to the multicast
domain.
On 6/15/06, Mayo, Richard A RDECOM CERDEC STCD
SRI
[EMAIL PROTECTED] wrote:
I believe this is a
Bob Johnson wrote:
On 6/15/06, Chuck Robey [EMAIL PROTECTED] wrote:
Greg Barniskis wrote:
Chuck Robey wrote:
docs, because then no one else would be able to use my documents. Am I
wrong in considering the FDP generated documentation as being in that
category, not terribly uselful outside
On Wed, Jun 14, 2006 at 09:06:29PM -0700, YTResearch wrote:
Has anyone been successful with using Verizon Wireless on FreeBSD. I
have read where the PC5740 card has been successfully used on Linux
claiming 160mbps with a ohci-hcd module. If that's true, I was
thinking this should be
Yesterday at 4:23pm, Mac Newbold said:
Today at 2:55pm, Mikhail Goriachev said:
Jun 14 11:27:21 mybox kernel: acd0: FAILURE - READ_CD HARDWARE ERROR
asc=0x08 ascq=0x01 error=0
Jun 14 11:27:21 mybox kernel: acd0: FAILURE - READ_CD ILLEGAL REQUEST
asc=0x64 ascq=0x00 error=0
Jun 14 11:27:22
How to get the best results from FreeBSD questions.
===
Last update $Date: 2005/08/10 02:21:44 $
This is a regular posting to the FreeBSD questions mailing list. If
you got it in answer to a message you sent, it means that the sender
thinks that
The trouble with books is that you can't update them the way you can a web page
or any other online documentation. The result is that most leading edge
computer books are out of date almost before they are printed. Unfortunately,
The Complete FreeBSD, published by O'Reilly, is no exception.
Mac Newbold wrote:
Yesterday at 4:23pm, Mac Newbold said:
Today at 2:55pm, Mikhail Goriachev said:
Jun 14 11:27:21 mybox kernel: acd0: FAILURE - READ_CD HARDWARE ERROR
asc=0x08 ascq=0x01 error=0
Jun 14 11:27:21 mybox kernel: acd0: FAILURE - READ_CD ILLEGAL REQUEST
asc=0x64 ascq=0x00 error=0
-Original Message-
From: Danial Thom [mailto:[EMAIL PROTECTED]
Sent: Friday, June 16, 2006 11:59 AM
To: Atom Powers; Mayo, Richard A RDECOM CERDEC STCD SRI
Cc: freebsd-questions@freebsd.org
Subject: Re: Probably a simple question but...
Are you running mrouted?
I'm not. And
On Fri, Jun 16, 2006, Chuck Robey wrote:
Bob Johnson wrote:
On 6/15/06, Chuck Robey [EMAIL PROTECTED] wrote:
Greg Barniskis wrote:
Chuck Robey wrote:
docs, because then no one else would be able to use my documents. Am I
wrong in considering the FDP generated documentation as being in that
given the following rules:
# Permit internal network to send packets through the firewall
pass in quick on $INT_IF from $INT_IF:network to any flags S/SA keep state
# Permit traffic from firewall to initiate connection to internal network:
pass out quick on $INT_IF from any to $INT_IF:network
On Fri, Jun 16, 2006 at 01:59:01PM -0500, J.D. Bronson wrote:
For example...moving a 50MB file:
'keep state' = 11-12MB/sec over 100MB-FDX
'modulate state = 6-7MB/sec over 100MB-FDX
..it took me a while to determine the culprit here - but I am curious
as to why this is the case?
Since
At 02:10 PM 6/16/2006, Darrin Chandler wrote:
On Fri, Jun 16, 2006 at 01:59:01PM -0500, J.D. Bronson wrote:
For example...moving a 50MB file:
'keep state' = 11-12MB/sec over 100MB-FDX
'modulate state = 6-7MB/sec over 100MB-FDX
..it took me a while to determine the culprit here - but I am
Hi,
I recently upgraded from 5.4 to 5.5, and now if I leave it in X for a
few minutes it ends up locking up, usually when the screen blanks on
its own. I wanted to go backwards to see if that behaviour goes away.
I wasn't sure if there was a risk doing this.
Thanks, Tuc
On Fri, Jun 16, 2006 at 02:13:00PM -0500, J.D. Bronson wrote:
At 02:10 PM 6/16/2006, Darrin Chandler wrote:
On Fri, Jun 16, 2006 at 01:59:01PM -0500, J.D. Bronson wrote:
For example...moving a 50MB file:
'keep state' = 11-12MB/sec over 100MB-FDX
'modulate state = 6-7MB/sec over 100MB-FDX
At 02:27 PM 6/16/2006, Darrin Chandler wrote:
The only two things that come to mind are 1) pf is using a really
complex and slow random source, or 2) something is going haywire with
the connection.
Have your tried tcpdump on either interface (not pflog) to see if
anything strange is going on
On 6/16/06, Pablo Marín Ramón [EMAIL PROTECTED] wrote:
Here goes a newbie question about classical FFS (without
softupdates).
As metadata is updated synchronously, can an i-node, at some
point, end pointing to not written yet data blocks? Is this a
security risk, i.e., can those pointed to data
Tuc wrote:
Hi,
I recently upgraded from 5.4 to 5.5, and now if I leave it in X for a
few minutes it ends up locking up, usually when the screen blanks on
its own. I wanted to go backwards to see if that behaviour goes away.
I wasn't sure if there was a risk doing this.
Thanks, Tuc
Mac Newbold wrote:
Yesterday at 4:23pm, Mac Newbold said:
Today at 2:55pm, Mikhail Goriachev said:
Jun 14 11:27:21 mybox kernel: acd0: FAILURE - READ_CD HARDWARE ERROR
asc=0x08 ascq=0x01 error=0
Jun 14 11:27:21 mybox kernel: acd0: FAILURE - READ_CD ILLEGAL REQUEST
asc=0x64 ascq=0x00 error=0
On Fri, Jun 16, 2006 at 09:39:27PM +0200, K?vesd?n G?bor wrote:
Tuc wrote:
Hi,
I recently upgraded from 5.4 to 5.5, and now if I leave it in X for a
few minutes it ends up locking up, usually when the screen blanks on
its own. I wanted to go backwards to see if that behaviour goes
I installed FreeBSD on a couple of computers without installing any source
code. Now (naturally), I want to get a hold of the kernel source so I can
re-compile and enable support for PIM and Multicast Routing.
However, I can't figure how to get the source off my CDs. I downloaded the
ISO's
You can get the source code at any time with cvsup, which is availible
through ports. check out
http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/cvsup.html
On 6/16/06, Mayo, Richard A RDECOM CERDEC STCD SRI
[EMAIL PROTECTED] wrote:
I installed FreeBSD on a couple of computers without
Mayo, Richard A RDECOM CERDEC STCD SRI [EMAIL PROTECTED]
writes:
I installed FreeBSD on a couple of computers without installing any source
code. Now (naturally), I want to get a hold of the kernel source so I can
re-compile and enable support for PIM and Multicast Routing.
However, I
On Fri, Jun 16, 2006 at 09:39:27PM +0200, K?vesd?n G?bor wrote:
Tuc wrote:
Hi,
I recently upgraded from 5.4 to 5.5, and now if I leave it in X for=
a
few minutes it ends up locking up, usually when the screen blanks on
its own. I wanted to go backwards to see if that behaviour
On Fri, Jun 16, 2006 at 04:41:35PM -0400, Scott Tuc Ellentuch at T-B-O-H wrote:
On Fri, Jun 16, 2006 at 09:39:27PM +0200, K?vesd?n G?bor wrote:
Tuc wrote:
Hi,
I recently upgraded from 5.4 to 5.5, and now if I leave it in X for=
a
few minutes it ends up locking up, usually
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Over on my old windoze xp box, I've got a program called
cvsnt. I wanted to see if I could update the source dir
over there by mounting the dir here locally, then running
cvsup to put everything there, before unmounting it. Then,
use cvsnt for a
On Fri, Jun 16, 2006 at 04:41:35PM -0400, Scott Tuc Ellentuch at T-B-O-H wr=
ote:
On Fri, Jun 16, 2006 at 09:39:27PM +0200, K?vesd?n G?bor wrote:
Tuc wrote:
Hi,
I recently upgraded from 5.4 to 5.5, and now if I leave it in X=
for=3D
a
few minutes it ends up
Chris Hill wrote:
On Sun, 11 Jun 2006, Ron wrote:
Is there a way to use the current ports system if I am still running 5.3?
That's the only way.
I really need to update subversion, mysql, plus make sure I'm running
the latest versions of other software, but since 5.4 came out (and now
5.5
On Fri, Jun 16, 2006 at 05:08:30PM -0400, Scott Tuc Ellentuch at T-B-O-H wrote:
6) portupgrade -Ri of anything that was xorg*, nvidia*
If you didn't use -f for nvidia-driver then it may not have rebuilt.
Kris
pgp09noI5d4Dd.pgp
Description: PGP signature
On Friday 16 June 2006 21:27, Mayo, Richard A RDECOM CERDEC STCD SRI wrote:
I installed FreeBSD on a couple of computers without installing any source
code. Now (naturally), I want to get a hold of the kernel source so I can
re-compile and enable support for PIM and Multicast Routing.
On Fri, Jun 16, 2006 at 05:08:30PM -0400, Scott Tuc Ellentuch at T-B-O-H
wrote:
6) portupgrade -Ri of anything that was xorg*, nvidia*
If you didn't use -f for nvidia-driver then it may not have rebuilt.
Well, my nvidia-driver was out of date as is. So I didn't
need to do an
Norberto Meijome wrote:
Hi all,
I'm looking for a tool that will allow me to compare directories (recursively)
showing what files are different,etc. meld ( textproc/meld ) can do this to
some extent, showing missing files,etc, but not showing what files are
different withoug having to open
On Fri, Jun 16, 2006 at 04:27:31PM -0400, Mayo, Richard A RDECOM CERDEC STCD
SRI wrote:
I installed FreeBSD on a couple of computers without installing any source
code. Now (naturally), I want to get a hold of the kernel source so I can
re-compile and enable support for PIM and Multicast
Mac Newbold wrote:
This has finally caused me enough grief that I'm going to ask about it
and see if there's something I'm doing wrong or some nice solution to
this really annyoing problem.
I'm on a 5-STABLE box, currently 5.5-PRERELEASE. I use cdparanoia and
lame (via abcde) to rip my
hello,
i've just discovered strange and unexpected behaviour of portsnap:
i configured sudo to allow me to run the script with the following contents:
/usr/sbin/portsnap fetch
/usr/sbin/portsnap update
/usr/local/sbin/portversion -v -l
/usr/local/sbin/portaudit -Fda
to be precise -- i allow my
Good day!
Since FreeBSD 3 I have been an active student/user/hacker on my own x86
(Netfinity) based small cluster of servers. Initially, I started with
FreeBSD as a path to learn *NIX style operating systems as well as the c
programming language, after having spent several years breaking and
trying to install freebsd 6.1 on a hp dc7100 (p4 3.4, sata, a pci-x slot,
etc). im having a couple issues getting it up and running with freebsd.
main issue is, i cannot get the system to power off with acpi. it will
shutdown, but it stops at a screen that just says the system has powered
Hello,
I don't know if this is related to the topic under discussion, but i'm
trying to rip a new CD it contains both video and audio and i'm stuck on
track 13. In my /var/log/messages i'm seeing this, and then the msg Last
message repeated 300 times and as the system tries to read and
On Saturday 17 June 2006 07:04, Tuc at T-B-O-H.NET wrote:
On Fri, Jun 16, 2006 at 05:08:30PM -0400, Scott Tuc Ellentuch at T-B-O-H
wrote:
6) portupgrade -Ri of anything that was xorg*, nvidia*
If you didn't use -f for nvidia-driver then it may not have rebuilt.
Well, my
On Jun 16, 2006, at 5:09 PM, Jonathan Horne wrote:
well, i figured out that if at the boot selection screen, if i choose
option 2 boot with acpi enabled, i can then give 'shutdown -p
now' and
the system will then power off properly. easy enough...
but how do i set option 2 as my default
I've got an AMD Sempron machine running FreeBSD 6.0 that's been
experiencing random panics while trying to build world. In fact it
just paniced now, with no activity.
The panic message is TPTE at 0xbfc20624 IS ZERO @ VA 0810
bad pte
This started last night while I was portupgrading ruby
Matthew Navarre wrote:
I've got an AMD Sempron machine running FreeBSD 6.0 that's been
experiencing random panics while trying to build world. In fact it just
paniced now, with no activity.
The panic message is TPTE at 0xbfc20624 IS ZERO @ VA 0810
bad pte
This started last night while I
On 06/16/06 17:39, James Retza wrote:
Good day!
[snip]
Please inform me as to how I may become a contributor/developer/whatever and
where I may most be of use.
might start here:
http://www.freebsd.org/doc/en_US.ISO8859-1/articles/contributing/
HTH
Thank you,
James Retza
On Jun 16, 2006, at 7:17 PM, Micah wrote:
Matthew Navarre wrote:
I've got an AMD Sempron machine running FreeBSD 6.0 that's been
experiencing random panics while trying to build world. In fact it
just paniced now, with no activity.
The panic message is TPTE at 0xbfc20624 IS ZERO @ VA
On Fri, 16 Jun 2006, Matthew Navarre wrote:
Is there a way to get the CPU temp in FreeBSD?
sysutils/mbmon
--
Chris Hill [EMAIL PROTECTED]
** [ Busy Expunging | ]
___
freebsd-questions@freebsd.org mailing list
On Jun 16, 2006, at 5:09 PM, Jonathan Horne wrote:
well, i figured out that if at the boot selection screen, if i choose
option 2 boot with acpi enabled, i can then give 'shutdown -p
now' and
the system will then power off properly. easy enough...
but how do i set option 2 as my default
Jonathan Horne wrote:
On Jun 16, 2006, at 5:09 PM, Jonathan Horne wrote:
well, i figured out that if at the boot selection screen, if i choose
option 2 boot with acpi enabled, i can then give 'shutdown -p
now' and
the system will then power off properly. easy enough...
but how do i set option
Matthew Navarre wrote:
On Jun 16, 2006, at 7:17 PM, Micah wrote:
Matthew Navarre wrote:
I've got an AMD Sempron machine running FreeBSD 6.0 that's been
experiencing random panics while trying to build world. In fact it
just paniced now, with no activity.
The panic message is TPTE at
Hi all,
ISTR something about a FreeBSD equivalent to DRBD on Linux ie creating a
raid device using disks on different machines, but I've not been able to
locate any info.
Does anybody have any info and or howtos. I am thinking of putting
together a HA NFS server cluster using something like
67 matches
Mail list logo
