On Tuesday 20 June 2006 20:48, Derrick Ryalls wrote:
Greetings,
i was wondering if anyone had a good tool recommendation for
creating DVD movies with FreeBSD. Since I have a child growing up,
it is appealing to me to make a copy of their favorite DVD and burn
it so they can handle the copy,
[EMAIL PROTECTED] wrote:
My conclusion, if you need something stable, don't use the onboard
raid, get a RAID card even the cheap ones will do better job!!
Hi,
Thanks for the confirmation the onboard controller is not the
way to go... What reliable and good raid controller would you
I've got four identical HP/Compaq DL360 G3 1u servers. Each has the
latest available firmware:
Proliant P31 (03/03/2005) BIOS
HP SmartArray 5i RAID onboard controller (v2.62)
(2) HPNC7781 (Broadcom BCM5703) (ASIC rev. 0x1002) 10/100/1000 onboard
network card
iLO v1.80 (Jul/12/2005)
and each
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Marc
G. Fournier
Sent: Tuesday, June 20, 2006 2:24 AM
To: freebsd-questions@freebsd.org
Subject: Are hardware vendors starting to bail on FreeBSD ... ?
... and is there anything we can do as a community to
Travis Fitch wrote:
Hello,
I was hoping someone might be able to shed some light on an issue I am
having with sendmail on FreeBSD 5.2.1 running on a Sun V120.
If you look at the snippet from top you can see that several sendmail
process are casing the kernel to use ~ 65% of the CPU. I am
Michael P. Soulier wrote:
Hello,
Is SMP enabled in the GENERIC kernel? I have a hyperthreading box, and on
Linux it shows up with two cpus. When I do a top on the box in FreeBSD I still
see only one CPU. Also, sysctl -a | grep cpu only shows a dev.cpu.0.
The GENERIC does not support SMP.
If
[EMAIL PROTECTED] wrote:
Hi,
I wasn't as lucky as Doug with my ASUS P4C800-E Deluxe board,
both with the ICH5R and Promise RAID controller.
1) With the Promise controller, after simulating a disk
problem (shutdown - disk disconnection - reboot - shutdown -
disk reconnection - reboot), I
On Wednesday 21 June 2006 02:41, Rakesh Prajapati wrote:
I would like to install CVS server on my FreeBSD 6.1 x386 machine.
Which ports should I install?
I installed cvsd and cvsdadm. Is that all I need to install and
configure?
I read at (http://ch.tudelft.nl/~arthur/cvsd/) that cvsd is a
Hello again,
Sorry to dig this up again. I'm in the position to order the server
now and the DL320 is within our price range. Is everyone still having
an enjoyable experience running FreeBSD on the DL3XX G4 range?
Regards,
William
On 05/05/06, Ted Mittelstaedt [EMAIL PROTECTED] wrote:
Yes,
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Philippe Lang
Sent: Tuesday, June 20, 2006 9:39 AM
To: Doug Poland
Cc: freebsd-questions
Subject: RE: ICH5R, ICH7R or Promise PDC20378 RAID?
[EMAIL PROTECTED] wrote:
On Mon, Jun 19, 2006 at 10:18:05AM
Ted Mittelstaedt wrote:
On Mon, Jun 19, 2006 at 10:18:05AM +0200, Philippe Lang wrote:
Hi,
I've got two boxes that would be perfect for a small server. The
motherboards are:
- ASUS P4C800-E Deluxe, with ICH5R and Promise PDC20378
- ASUS P5WD2, with ICH7R
I intend to install FreeBSD
Did you install the Broadcom patch?
Ted
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Jeremy Kister
Sent: Tuesday, June 20, 2006 11:26 PM
To: freebsd-questions@freebsd.org
Subject: Crashing with HP/Compaq DL360 G3 [paging kernel developer]
I've got
Your mail to 'LUMI' with the subject
Error
Is being held until the list moderator can review it for approval.
The reason it is being held:
Post by non-member to a members-only list
Either the message will get posted to the list, or you will receive
notification of the moderator's
Michael P. Soulier wrote:
On 20/06/06 Andy Reitz said:
I believe that ia64 refers to the Itanium port of FreeBSD, and I'm not
sure of the i386 version will install on Itanium. Are you referring to the
AMD64/EMT-64 port of FreeBSD?
It's a 64-bit P4. My i386 5.4 install works fine.
Mike
On 6/20/06, Michael P. Soulier [EMAIL PROTECTED] wrote:
On 20/06/06 Andy Reitz said:
I believe that ia64 refers to the Itanium port of FreeBSD, and I'm not
sure of the i386 version will install on Itanium. Are you referring to the
AMD64/EMT-64 port of FreeBSD?
It's a 64-bit P4. My i386 5.4
Hi forks,
someone has the same problems with skype after the update ?
[EMAIL PROTECTED] ~% skype
skype_bin: error while loading shared
libraries: /usr/lib/libpthread.so.0: ELF file OS ABI invalid
[EMAIL PROTECTED] ~%
___
On Wed, 21 Jun 2006 11:51:27 +0200
Martin Wilke [EMAIL PROTECTED] wrote:
Hi forks,
someone has the same problems with skype after the update ?
[EMAIL PROTECTED] ~% skype
skype_bin: error while loading shared
libraries: /usr/lib/libpthread.so.0: ELF file OS ABI invalid
[EMAIL
Hi forks,
someone has the same problems with skype after the update ?
[EMAIL PROTECTED] ~% skype
skype_bin: error while loading shared
libraries: /usr/lib/libpthread.so.0: ELF file OS ABI invalid
[EMAIL PROTECTED] ~%
___
On Wed, 21 Jun 2006 12:53:56 +0300
Ion-Mihai IOnut Tetcu [EMAIL PROTECTED] wrote:
On Wed, 21 Jun 2006 11:51:27 +0200
Martin Wilke [EMAIL PROTECTED] wrote:
Hi forks,
someone has the same problems with skype after the update ?
[EMAIL PROTECTED] ~% skype
skype_bin: error while
On Wed, 21 Jun 2006 12:13:50 +0200
Martin Wilke [EMAIL PROTECTED] wrote:
On Wed, 21 Jun 2006 12:53:56 +0300
Ion-Mihai IOnut Tetcu [EMAIL PROTECTED] wrote:
On Wed, 21 Jun 2006 11:51:27 +0200
Martin Wilke [EMAIL PROTECTED] wrote:
Hi forks,
someone has the same problems
On Wed, 21 Jun 2006 11:51:27 +0200 Martin Wilke wrote:
someone has the same problems with skype after the update ?
[EMAIL PROTECTED] ~% skype
skype_bin: error while loading shared
libraries: /usr/lib/libpthread.so.0: ELF file OS ABI invalid
[EMAIL PROTECTED] ~%
Do you have some
On Wed, 21 Jun 2006 12:13:50 +0200 Martin Wilke wrote:
On Wed, 21 Jun 2006 12:53:56 +0300
Ion-Mihai IOnut Tetcu [EMAIL PROTECTED] wrote:
On Wed, 21 Jun 2006 11:51:27 +0200
Martin Wilke [EMAIL PROTECTED] wrote:
someone has the same problems with skype after the update ?
[EMAIL
Is there any way to monitor hardware on Dell PowerEdge 2850.
Hot-Swap PowerSupply(most critical), CPU Temperature, RAID status and other?
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To
On Wed, 21 Jun 2006 14:47:59 +0400
Boris Samorodov [EMAIL PROTECTED] wrote:
Do you have some non-default settings that results in seaching /usr
before /compat/linux (ex. LD_LIBRARY_PATH) or so?
And, please, show your:
$ ldd `which skype_bin`
hi Boris,
thx you solved :)
Martin
On Wed, 21 Jun 2006 13:32:04 +0200
Martin Wilke [EMAIL PROTECTED] wrote:
On Wed, 21 Jun 2006 14:47:59 +0400
Boris Samorodov [EMAIL PROTECTED] wrote:
Do you have some non-default settings that results in seaching /usr
before /compat/linux (ex. LD_LIBRARY_PATH) or so?
And, please, show
In response to Skoryk Peter [EMAIL PROTECTED]:
Is there any way to monitor hardware on Dell PowerEdge 2850.
Hot-Swap PowerSupply(most critical), CPU Temperature, RAID status and other?
ipmitool and megarc in the ports.
--
Bill Moran
Collaborative Fusion Inc.
Hi, this is my first time I customize my kernel.
I'm working with Freebsd 6.0, I made a make buildkernel
KERNELCONF=ALBABRAIN, and I get this error:
...
cc -c -O -pipe -mcpu=pentiumpro -Wall -Wredundant-decls
-Wnested-externs -Wstrict-prototypes -Wmissing-prototypes
On 2006-06-21 13:23, Jordi Pavon [EMAIL PROTECTED] wrote:
Hi, this is my first time I customize my kernel.
I'm working with Freebsd 6.0, I made a make buildkernel
KERNELCONF=ALBABRAIN, and I get this error:
...
cc -c -O -pipe -mcpu=pentiumpro -Wall -Wredundant-decls [...]
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
On 2006-06-21 13:23, Jordi Pavon wrote:
Hi, this is my first time I customize my kernel.
I'm working with Freebsd 6.0, I made a make buildkernel
KERNELCONF=ALBABRAIN, and I get this error:
...
cc -c -O -pipe -mcpu=pentiumpro -Wall -Wredundant-decls [...]
On 6/18/06, Pablo Marín Ramón [EMAIL PROTECTED] wrote:
Bob Johnson wrote:
The short answer is that fsck can detect the bad inodes and fix or
delete them. Assuming no programming errors, you don't have to worry
about a file containing bogus data after fsck has run. Unfortunately,
if
On 6/21/06, Ion-Mihai IOnut Tetcu [EMAIL PROTECTED] wrote:
On Wed, 21 Jun 2006 13:32:04 +0200
Martin Wilke [EMAIL PROTECTED] wrote:
On Wed, 21 Jun 2006 14:47:59 +0400
Boris Samorodov [EMAIL PROTECTED] wrote:
Do you have some non-default settings that results in seaching /usr
before
Jordi Pavon [EMAIL PROTECTED] wrote:
The configuration File is attached, sorry for the Hotmail editor.
You have the umass device enabled which, as it says, requires scbus
and da. Either remark the umass line or unremark the scbus and da
lines in the SCSI peripherals section.
Also, as you
On 6/21/06, Jordi Pavon [EMAIL PROTECTED] wrote:
On 2006-06-21 13:23, Jordi Pavon wrote:
Hi, this is my first time I customize my kernel.
I'm working with Freebsd 6.0, I made a make buildkernel
KERNELCONF=ALBABRAIN, and I get this error:
...
cc -c
On 20/06/06 Michael P. Soulier said:
Hey people,
I had a power failure today (there goes my uptime) that lasted longer than my
UPS, and when the box came back up, my PPPoE connection did not.
# Enable PPPoE
ppp_enable=YES
ppp_mode=ddial
ppp_nat=YES
ppp_profile=storm
Is this not
On Wednesday 21 June 2006 01:42, Michael Collette wrote:
Andy Reitz wrote:
In 64-bit mode, that does appear to be the case. However, it sounds like
you could purchase an AMD64-based processor, and have everythign work
fine in 32-bit mode. Then later down the road, as the software evolves,
-Original Message-
From: Mark [mailto:[EMAIL PROTECTED]
Sent: dinsdag 20 juni 2006 2:53
To: 'FreeBSD-Questions Questions'
Subject: RE: Does FreeBSD 4.11-STABLE support the Intel
PWLA8391GT NIC?
-Original Message-
From: Björn König [mailto:[EMAIL PROTECTED]
Sent:
Hello all,
We have an old dusty DECstation (last bootup circa 1993) that is finally being
removed from our server room after we do one final dump of the data. If I
were to remove its drives to attatch to a modern scsi card, could I still
mount them under FreeBSD? I'm pretty sure Ultrix was
Hello,
I'm moving from mod_php5 to php5 and need to remove php5-extensions in
order for pkg remove to work.
What is the easiest way to do this...can I just cd /php5-exten.. dir and
make deinstall or will i have to go through them all one by one (I have
a lot installed).
I tried this last
In response to Richard Collyer [EMAIL PROTECTED]:
Hello,
I'm moving from mod_php5 to php5 and need to remove php5-extensions in
order for pkg remove to work.
What is the easiest way to do this...can I just cd /php5-exten.. dir and
make deinstall or will i have to go through them all
On Jun 21, 2006, at 4:59 PM, Mark wrote:
-Original Message-
From: Mark [mailto:[EMAIL PROTECTED]
Sent: dinsdag 20 juni 2006 2:53
To: 'FreeBSD-Questions Questions'
Subject: RE: Does FreeBSD 4.11-STABLE support the Intel
PWLA8391GT NIC?
-Original Message-
From: Björn König
On 21/06/06 Nikolas Britton said:
IA64 = Itanium, Itanium2 = FreeBSD/ia64
EM64T = Intel CPUs with AMD64 (P4, Xeon, etc.) = FreeBSD/amd64
AMD64 = Opteron, Athlon 64, Turion 64, Sempron 64 = FreeBSD/amd64
http://en.wikipedia.org/wiki/EM64T
Why do you need to run in 64-bit mode?
I'm asking
RW wrote:
On Tuesday 20 June 2006 15:15, B. Cook wrote:
Hello all,
I'm looking at what I think is the right answer.. but can't make sense
of it..
basically I have a couple of mailservers that run exim and dnscache, all
being called out of daemontools.
but I can't seem to figure out how to
On Wednesday 21 June 2006 12:20, Bill Moran wrote:
In response to Richard Collyer [EMAIL PROTECTED]:
Hello,
I'm moving from mod_php5 to php5 and need to remove php5-extensions in
order for pkg remove to work.
What is the easiest way to do this...can I just cd /php5-exten.. dir and
On 6/21/2006 6:01 AM, Ted Mittelstaedt wrote:
Did you install the Broadcom patch?
We did apply kern/96806 to one of the four systems, which we found in
our massive google search to try to fix the problem.
The machine rebooted about 6 hours after having the new code installed,
so we undid
On 6/21/06, Ted Mittelstaedt [EMAIL PROTECTED] wrote:
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Marc
G. Fournier
Sent: Tuesday, June 20, 2006 2:24 AM
To: freebsd-questions@freebsd.org
Subject: Are hardware vendors starting to bail on FreeBSD ... ?
I don't know if anyone is still interested, but I found a solution to
this problem. My mail goes Sendmail--Procmail--CyrusIMAP.
There are numerous discussions of how to configure the
Sendmail--Procmail portion, so I'll skip that.
The problem lies in the Procmail--Cyrus part. Sendmail
On 6/21/06, Michael P. Soulier [EMAIL PROTECTED] wrote:
On 21/06/06 Nikolas Britton said:
IA64 = Itanium, Itanium2 = FreeBSD/ia64
EM64T = Intel CPUs with AMD64 (P4, Xeon, etc.) = FreeBSD/amd64
AMD64 = Opteron, Athlon 64, Turion 64, Sempron 64 = FreeBSD/amd64
On 6/21/06, Michael P. Soulier [EMAIL PROTECTED] wrote:
On 21/06/06 Nikolas Britton said:
IA64 = Itanium, Itanium2 = FreeBSD/ia64
EM64T = Intel CPUs with AMD64 (P4, Xeon, etc.) = FreeBSD/amd64
AMD64 = Opteron, Athlon 64, Turion 64, Sempron 64 = FreeBSD/amd64
On 6/21/2006 2:25 AM, Jeremy Kister wrote:
I have sudden [seemingly random] reboots with all four (see
http://unix.derkeiler.com/Mailing-Lists/FreeBSD/questions/2006-02/msg01605.html)
while running FreeBSD 6.0-RELEASE through the PreReleases and now with
6.1-STABLE.
I just found a post
On Jun 21, 2006, at 12:18 PM, Nikolas Britton wrote:
Areca also supports FreeBSD:
$ man arcmsr (FreeBSD 5.4+)
http://www.areca.com.tw
I have some though they are not in service yet. Right now destined
for some Solaris boxes when Areca can fix a bad interaction between
my Tyan opteron
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of David J Brooks
Sent: Wednesday, June 21, 2006 1:47 AM
To: freebsd-questions@freebsd.org
Cc: Derrick Ryalls
Subject: Re: Creating DVD Movies
On Tuesday 20 June 2006 19:48, Derrick Ryalls wrote:
Greetings,
Hi all!
I have quite a big problem here
I've upgraded my FreeBSD 4.11 to 6.1. Basically, I did a newfs of / and /usr
and reinstalled from scratch. That worked.
Rebooted in 6.1 single user mode, mounted /, /usr and /usr/home. The latter
I did not touch and I need to save that partition.
On Wednesday 21 June 2006 15:03, Jean-Paul Natola wrote:
Does this app only do AVI to MPEG?
tovid takes any multimedia video file as input, and produces (S)VCD or
DVD-compliant MPEG video files as output.
The output of tovid then becomes an input to makevcd or makedvd, and so on.
David
--
Hello,
I am installing a FreeBSD 6.1 i386 machine and using IPF. When I
apply some variables to sysctl for IPF I end up with a device busy
response.
the variables in question are:
net.inet.ipf.fr_tcpclosed=1
net.inet.ipf.fr_tcpclosewait=60
net.inet.ipf.fr_tcphalfclosed=300
On Wednesday 21 June 2006 18:40, B. Cook wrote:
RW wrote:
On Tuesday 20 June 2006 15:15, B. Cook wrote:
Hello all,
I'm looking at what I think is the right answer.. but can't make sense
of it..
basically I have a couple of mailservers that run exim and dnscache, all
being called
Hello Michael,
* Michael P. Soulier [EMAIL PROTECTED] [20-06-06 19:32]:
# Enable PPPoE
ppp_enable=YES
ppp_mode=ddial
ppp_nat=YES
ppp_profile=storm
Is this not correct? Should this not cause ppp to be started, using the
storm profile, at boot?
I had to do it manually via
ppp -ddial
does anyone know how to resolve the following error in googleearth
(astro/google-earth)
=== Vulnerability check disabled, database not found
=== Extracting for google-earth-4
= MD5 Checksum OK for GoogleEarthLinux.bin.
= SHA256 Checksum OK for GoogleEarthLinux.bin.
=== Patching for
--- Brett [EMAIL PROTECTED] wrote:
On 6/20/06, Danial Thom [EMAIL PROTECTED]
wrote:
User manuals and how-tos don't generally get
copyright notices, because there is nothing
creative about it. Someone could write
exactly
the same thing (just about), and you'd have
little claim
I would probably save weeks trying to turn FBSD into the kind of
Desktop or window-manager platform I want by just using my
Ubuntu platform.
I'm still stickng
with CTWM. On my Ubuntu servers there is amarak(sp?) which is
my favorite audio-only
On 6/21/06, Marc G. Fournier [EMAIL PROTECTED] wrote:
On Wed, 21 Jun 2006, Nikolas Britton wrote:
On 6/21/06, Ted Mittelstaedt [EMAIL PROTECTED] wrote:
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Marc
G. Fournier
Sent: Tuesday, June 20, 2006
On 6/21/06, Gary Kline [EMAIL PROTECTED] wrote:
I would probably save weeks trying to turn FBSD into the kind of
Desktop or window-manager platform I want by just using my
Ubuntu platform.
I'm still stickng
with CTWM. On my Ubuntu servers there is
On Jun 21, 2006, at 4:58 PM, Marc G. Fournier wrote:
b. are ppl actually using/promoting SATA drives in a server
environment?
Or are we just talking about situations where you have a large
number
of spindles to work with? My one experience with an SATA
configuration
is that
On Wednesday 21 June 2006 23:17, Gary Kline wrote:
I would probably save weeks trying to turn FBSD into the kind of
Desktop or window-manager platform I want by just using my
Ubuntu platform.
I'm still stickng
with CTWM. On my Ubuntu servers there is
On Wed, 21 Jun 2006, Gary Kline wrote:
...On my Ubuntu servers there is amarak(sp?) which is
my favorite audio-only apps so far. Is there anything like this
that doesn't require desktop-specific libraries?
I've been using xmms for ages. It works, supports many
On Wed, 21 Jun 2006, Nikolas Britton wrote:
On 6/21/06, Ted Mittelstaedt [EMAIL PROTECTED] wrote:
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Marc
G. Fournier
Sent: Tuesday, June 20, 2006 2:24 AM
To: freebsd-questions@freebsd.org
Subject: Are
On Wed, 21 Jun 2006, Nikolas Britton wrote:
On 6/21/06, Marc G. Fournier [EMAIL PROTECTED] wrote:
On Wed, 21 Jun 2006, Nikolas Britton wrote:
On 6/21/06, Ted Mittelstaedt [EMAIL PROTECTED] wrote:
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Marc
I have two servers, exact same hardware, exact same version of FreeBSD, in
this case 4.10. When I run pkg_add blah.tbz on one machine, it takes between
2-8 hours, on the other 8-10 minutes. These machines are quad-Intel
2.8Xeons, with 4GB of memory.
Ive done everything from running make world,
Hi all,
How can I raise the file descriptors limits for each socket in
FBSD 5.4?
Thank You,
- Marcelo
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to
Hi Everybody,
I posted this to the freebsd-scsi list a week ago but no-one has
replied, why I take the liberty of posting it here as well.
Sorry for bothering you, but if you have the time, I'd really appreciate
your comments on the following problem:
I've got a P3 system with an onboard
Hi Everybody,
I posted this to the freebsd-scsi list a week ago but no-one has
replied, why I take the liberty of posting it here as well.
Sorry for bothering you, but if you have the time, I'd really appreciate
your comments on the following problem:
I've got a P3 system with an onboard
vlc
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
72 matches
Mail list logo
