On Sun, Jun 7, 2009 at 11:26 PM, Miroslav Lachman 000.f...@quip.cz wrote:
claudiu vasadi wrote:
On Sun, Jun 7, 2009 at 9:38 PM, Wojciech Puchar
woj...@wojtek.tensor.gdynia.pl wrote:
Jun 7 21:10:47 da1 kernel: ad6: detached
Jun 7 21:10:47 da1 kernel:
RW wrote:
On Sun, 07 Jun 2009 20:13:30 -0400
Michael Powell nightre...@verizon.net wrote:
The nv can easily be installed along with Xorg. The nvidia driver is
more complex as it relies on the linuxolator to function, so there is
a larger number of dependencies.
This is incorrect:
I
I think my file/print/mail server is a bit overkill:
http://w3.mutehq.net:8008/sysinfo/
Nice, esp when you compile world. Last year I upgraded our server
to a Core 2 Duo 1.8Ghz, Intel DG965 board. 2GB RAM. Previous board
was an ASUS P3 1.1GHz, which now hosts my backup server. Both ran
On Saturday 06 June 2009 05:43:15 Charlie Kester wrote:
On Fri 05 Jun 2009 at 15:06:40 PDT Paul Chvostek wrote:
If you elect to filter this person's traffic, and are concerned that
you'll continue to be inundated with replies, I'd like to suggest a
small procmail script I wrote years ago.
isn;t it trying to read past the end of disk?
Hmm.. I guess you are correct. The question is why is it doing this ?
because partition/slice table is wrong?
___
freebsd-questions@freebsd.org mailing list
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
and, later:
...
GEOM_LABEL: Label ufsid/4a259f5253bef8ae removed.
uhub2: port 2 reset failed
uhub2: port 2 reset failed
uhub2: port 2 reset failed
uhub2: port 2 reset failed
uhub2: port 2 reset failed
uhub2:
the onboard SATA sockets so I could increase our available disk space
(4x500GB in RAID5 for data).
However, a nice benefit is that the Core2 will compile world in 1/4
the time, and user don't notice the server is 'busy'.
Core2 is actually only a bit faster per clock cycle than PIII, but you
On Mon, Jun 8, 2009 at 10:06 AM, DA Forsyth d.fors...@ru.ac.za wrote:
I think my file/print/mail server is a bit overkill:
http://w3.mutehq.net:8008/sysinfo/
Nice, esp when you compile world. Last year I upgraded our server
to a Core 2 Duo 1.8Ghz, Intel DG965 board. 2GB RAM. Previous
On Mon, Jun 8, 2009 at 10:06 AM, DA Forsyth d.fors...@ru.ac.za wrote:
I think my file/print/mail server is a bit overkill:
http://w3.mutehq.net:8008/sysinfo/
Nice, esp when you compile world. Last year I upgraded our server
to a Core 2 Duo 1.8Ghz, Intel DG965 board. 2GB RAM. Previous
On Fri, 5 Jun 2009, Brooks Davis wrote:
On Sat, Jun 06, 2009 at 01:25:09AM +1000, Ian Smith wrote:
On Wed, 3 Jun 2009 15:07:53 +0300 Ghirai ghi...@ghirai.com wrote:
Is there any (native) FreeBSD supoprt for Phidgets
(http://www.phidgets.com?
Someone seems to have
On Mon, Jun 8, 2009 at 9:16 AM, Wojciech Puchar
woj...@wojtek.tensor.gdynia.pl wrote:
the type fdisk /dev/da1 and then compare the sectors values with what dmesg
says
fdisk /dev/ad2 :
*** Working on device /dev/ad2 ***
parameters extracted from in-core disklabel are:
On Sun, 07 Jun 2009 20:13:30 -0400
Michael Powell nightre...@verizon.net wrote:
[snip]
The nv can easily be installed along with Xorg. The nvidia driver is
more complex as it relies on the linuxolator to function, so there is
a larger number of dependencies. But when it comes time to change from
On Sun, 7 Jun 2009 19:46:29 -0600
Chad Perrin per...@apotheon.com wrote:
On Thu, Jun 04, 2009 at 11:50:35PM -0400, itsemu wrote:
if your dealing with a isp such as a cable/dsl company, remember the
requirements to work there, they arent trained on anything besides
windows.. probably dont
On Monday 08 June 2009, Michael Powell wrote:
As to which of the ports you need - the regular nvidia-driver and not
either of the 'legacy' versions should probably be used
I found that I had to use the legacy nvidia-driver-96 port to get my
GeForce 6150 to function, as described in my post a
hi,
yes, you are mis-understanding
samba itself is a NT4-type domain.
not quite right. It depends on the samba version your using.
- samba3 only provides NT4-type domains
- samba4 provides active directory domain types including GPO (I have
such a setup running in 7.SOMETHING with around 10
Dear gentleman,
i would like to configure a FreeBSD installation as storage server
solution. Iwould like to use iSCSI.
Is it possible to configure a server running FreeBSD as a iSCSI server
(i.e., i mean as a target)?
Thanks a lot for your time and cooperation.
Best regards,
FL.
solution. Iwould like to use iSCSI.
Is it possible to configure a server running FreeBSD as a iSCSI server
(i.e., i mean as a target)?
/usr/ports/net/iscsi-target
___
freebsd-questions@freebsd.org mailing list
On Mon, 08 Jun 2009 02:26:34 -0400
Michael Powell nightre...@verizon.net wrote:
To install the nvidia-driver port a kernel module named nvidia.ko is
compiled. This module requires linux.ko to be loaded first. The
reason is the nvidia-driver itself is a linux binary blob, and
consequently
On 8/6/09 12:10, Friedrich Locke wrote:
Dear gentleman,
i would like to configure a FreeBSD installation as storage server
solution. Iwould like to use iSCSI.
Is it possible to configure a server running FreeBSD as a iSCSI server
(i.e., i mean as a target)?
Indeed it is, although as yet
Message: 22
Date: Mon, 8 Jun 2009 08:10:50 -0300
From: Friedrich Locke friedrich.lo...@gmail.com
Subject: SAN FreeBSD Server
To: freebsd-questions@freebsd.org
Message-ID:
e678d5750906080410k62cc551el8ff8c89e9555...@mail.gmail.com
Content-Type: text/plain; charset=ISO-8859-1
Dear
Hi,
Maybe FreeNAS is something ? From http://www.freenas.org/ :
FreeNAS is a free NAS (Network-Attached Storage) server,
supporting: CIFS (samba), FTP, NFS, AFP, RSYNC, iSCSI
protocols, S.M.A.R.T., local user authentication, Software
RAID (0,1,5) with a Full WEB configuration interface.
And also
On 8 Jun 2009 , freebsd-questions-requ...@freebsd.org entreated about
freebsd-questions Digest, Vol 262, Issue 2:
Message: 13
Date: Mon, 8 Jun 2009 09:18:09 +0200 (CEST)
From: Wojciech Puchar woj...@wojtek.tensor.gdynia.pl
SO, to the original question, yes that motherboard will work just
Hi,
I used the following procedure to install samba4 on a freebsd box:
http://wiki.samba.org/index.php/Samba4/HOWTO
in my current setup (which is about 4 months old) the following this do
not work:
- active directory groups did somehow not work as expected, but I didn't
had the time to look
hi,
Where did you get samba4? How did you download?
How did you compile on FreeBSD? You can share your ./configure args?
have a look into the mail I just posted on freebsd-questions, it
includes links to the samba wiki where installation is explained in
detail.
And your smb.conf and loop
I would like to execute a script on every last day of the month in my
crontab.
Can someone tell me how I should solve that as it doesn't know which
month day is the last day of the month?
Solving this in the script to be executed is no option.
Thanks, Jos
Hi,
thanks for the hint, this brought me to a (IMHO) good way to accomplish
this.
When using FreeBSD as domU and configuring the kernel in the domU config
file (rather than using pygrub) it's possible to append kernel
parameters, by defining them in the variable 'extras' within the domU
config
On Mon, Jun 8, 2009 at 7:55 AM, Jos Chrispijn j...@webrz.net wrote:
I would like to execute a script on every last day of the month in my
crontab.
Can someone tell me how I should solve that as it doesn't know which month
day is the last day of the month?
If it really needs to be done on
Jos Chrispijn wrote:
I would like to execute a script on every last day of the month in my
crontab.
Can someone tell me how I should solve that as it doesn't know which
month day is the last day of the month?
Solving this in the script to be executed is no option.
I've done this before. My
put 12 lines, for each month and with the last day.
On Mon, 8 Jun 2009, Jos Chrispijn wrote:
I would like to execute a script on every last day of the month in my
crontab.
Can someone tell me how I should solve that as it doesn't know which month
day is the last day of the month?
Solving
If you want to use gmirror + gjournal on the root filesystem (/), be
sure to use FreeBSD 7.2. A bug prevented the system to boot on unclean
shutdown because the replay of the journal took too much time and
FreeBSD wanted to mount non-existant (yet) devices. It caused me a lot
of trouble when I
Here's a good workaround.
This works for me from Linux to Win32. In your rsync script, before the
rsync, do either
find ./ -name '*:*' | xargs tar -czvf colon_files.tgz
or (if you're doing the whole box as an rsync backup, like I am) do
updatedb
locate : | xargs tar -czvf colon_files.tgz
Hi Jos,
On Mon, Jun 08, 2009 at 02:55:56PM +0200, Jos Chrispijn wrote:
I would like to execute a script on every last day of the month in my
crontab.
Can someone tell me how I should solve that as it doesn't know which
month day is the last day of the month?
Solving this in the script to
may be this solution will help you:
* * 31 jan,mar,may,jul,aug,oct,dec *
* * 30 apr,jun,sep,nov *
* * 28 feb *
or:
* * 31 1/2 *
* * 30 4/2 *
* * 28 2 *
2009/6/8 Jos Chrispijn j...@webrz.net
I would like to execute a script on every last day of the month in my
crontab.
Can someone tell me
On Mon, 8 Jun 2009 11:15:16 +0100
Mike Clarke jmc-freeb...@milibyte.co.uk wrote:
On Monday 08 June 2009, Michael Powell wrote:
As to which of the ports you need - the regular nvidia-driver and not
either of the 'legacy' versions should probably be used
I found that I had to use the legacy
Hi all.
I'm trying to format an USB key with mkntfs (I tried with 1.13.1_5 and
2.0.0).
Whatever I do, it never works.
Some of results I got:
(with 2.0.0)
~# mkntfs -F -p 63 -H 255 -S 63 /dev/da0s1
/dev/da0s1 is not a block device.
mkntfs forced anyway.
Cluster size has been automatically set to
On Mon, Jun 08, 2009 at 06:31:57PM +0400, Peter Andreev wrote:
may be this solution will help you:
* * 31 jan,mar,may,jul,aug,oct,dec *
* * 30 apr,jun,sep,nov *
* * 28 feb *
or:
* * 31 1/2 *
* * 30 4/2 *
* * 28 2 *
Don't forget leapyear.
jerry
2009/6/8 Jos Chrispijn
On Monday 08 June 2009, Carmel wrote:
One last question; if I install the AMD 64 bit version of FBSD, will
the NV driver work? I know that the regular one won't since it
doesn't support 64 bit systems.
I'm using i386 so have no direct experience of this but package versions
of the
I am not exactly sure which driver I am using between these two, however I
have found that setting up the driver and display are great with these
packages installed. I guess I would be using the most recent :)
nvidia-driver-173.14.12
nvidia-driver-71.86.06
nvidia-settings-173.14.09
Unless I am missing it, I do not see any mention of NO_PROFILE listed
in the examples make.conf file. Has it been depreciated?
--
Jerry
ges...@yahoo.com
Serving coffee on an aircraft causes turbulence.
signature.asc
Description: PGP signature
If that's related to 'world', all world-related build options should
be placed in src.conf now. What make.conf was to world+ports, is now
src.conf = world, make.conf = ports
Was a new feature in 7.0, IIRC
On 6/8/09, Jerry ges...@yahoo.com wrote:
Unless I am missing it, I do not see any
On Mon, 8 Jun 2009, Jerry McAllister wrote:
On Mon, Jun 08, 2009 at 06:31:57PM +0400, Peter Andreev wrote:
may be this solution will help you:
* * 31 jan,mar,may,jul,aug,oct,dec *
* * 30 apr,jun,sep,nov *
* * 28 feb *
or:
* * 31 1/2 *
* * 30 4/2 *
* * 28 2 *
Don't forget leapyear.
0 0
Sorry to revive an old thread.. I am working with raid3 vs raid5 at
home to understand the difference better. And this might help the OP.
RAID3 has a dedicated parity drive, and the number of consumers must be (2^n)+1
(2^1)+1 = 3
(2^2)+1 = 5
(2^3)+1 = 9
RAID5 is a distributed parity,
On Mon, 8 Jun 2009 10:59:30 -0600
Tim Judd taj...@gmail.com wrote:
If that's related to 'world', all world-related build options should
be placed in src.conf now. What make.conf was to world+ports, is now
src.conf = world, make.conf = ports
Please don't top post. It makes following a thread a
RW wrote:
[snip]
Simple, but wrong.
The driver is not a Linux driver, if you go to the nVidia site you will
see that there are separate Linux and FreeBSD drivers. You don't need
to load linux.ko at all if you built nvidia.ko without Linux support.
[snip]
Aha! You're right! Something
Lars Eighner wrote:
What I need most is to find (a) make tutorial(s) that do not suppose
make is
being used for compling c/c++ programs. Yes, I know, that is mostly why
make exists, but many tutorials plunge right into C examples with
implicit C
rules, while -- it seems to me -- make
Carmel wrote:
On Sun, 07 Jun 2009 20:13:30 -0400
Michael Powell nightre...@verizon.net wrote:
[snip]
The nv can easily be installed along with Xorg. The nvidia driver is
more complex as it relies on the linuxolator to function, so there is
a larger number of dependencies. But when it comes
Hi,
I need to buy some new servers, and mgmt has decreed that we get them from
someplace which will provide service contracts with on-site h/w suppport,
which means HP, Dell, Sun, IBM, etc.
Has anyone bought servers from one of the big manufacturers lately and had
good luck with them? It seems
On Mon, 08 Jun 2009 14:55:56 +0200,
Jos Chrispijn j...@webrz.net said:
J I would like to execute a script on every last day of the month in my
J crontab. Can someone tell me how I should solve that as it doesn't know
J which month day is the last day of the month? Solving this in the script
ericr wrote:
I need to buy some new servers, and mgmt has decreed that we get them from
someplace which will provide service contracts with on-site h/w suppport,
which means HP, Dell, Sun, IBM, etc.
We use Dell almost exclusively. Although Dell doesn't officially support
FreeBSD, Dell hardware
Michael Powell wrote:
Section Device
#Driver nv
Driver nvidia
Just change nv to nvidia, and perhaps in Section Module
Load glx if you need to.
Also notice what RW said; I am behind the times wrt to how things have
changed.
-Mike
What I have found to work
Found another solution (for running @ 23:58):
58 23 * * * [ `date -d tomorrow +%d` -eq '01' ] /myscript
thanks for all other suggestions,
Jos Chrispijn
___
freebsd-questions@freebsd.org mailing list
LoH wrote:
[snip]
What I have found to work is to make the nvidia-driver port, but not
install it (to get the dependencies). Then I would download the recent
driver from nVidia's website (as of this email, 185.18.14), untar it and
install that instead. If nvidia-xconfig doesn't work
And I say you get what you pay for. My organization uses Dell
exclusively and it's been a thorn in my side from day one. The AC
power requirements (it seems) for Dells are about 3x as much as
Gateways (I know, Gateway doesn't provide servers). The power draw
for the Dells don't seem to be any
Jerry wrote:
On Mon, 8 Jun 2009 10:59:30 -0600
Tim Judd taj...@gmail.com wrote:
If that's related to 'world', all world-related build options should
be placed in src.conf now. What make.conf was to world+ports, is now
src.conf = world, make.conf = ports
Please don't top post. It makes
On Mon, Jun 08, 2009 at 12:43:23PM -0400, Jerry wrote:
Unless I am missing it, I do not see any mention of NO_PROFILE listed
in the examples make.conf file. Has it been depreciated?
It has been moved to src.conf as WITHOUT_PROFILE. See src.conf(5).
Roland
--
R.F.Smith
Dagnabbit! Meant to also send this to the list.
Kurt
On Fri, Sep 19, 2008 at 10:28, Giorgos
Keramidaskeram...@ceid.upatras.gr wrote:
On Fri, 19 Sep 2008 13:37:50 +0100, Anton Shterenlikht me...@bristol.ac.uk
wrote:
I cannot trasfer a file with a colon via rsync to a Win box.
I've
Hello,
I am currently using a 7.2-STABLE with iSCSI enabled in the kernel. I
have tried to enable a file system which is 2.4TB in size (this is on
an amd64 architecture). I have followed different documentations I
found and can export an iSCSI target fine and initiate the iSCSI drive
either on a
hi,
title says it, i downloaded mp4 file by youtube-dl,
but it downloaded video and audio as well. I would
like to separate audio from that file.
i try to find some port in /usr/ports/audio but nothing
reasonable occudred.
i tried find . -type f -name pkg-descr | xargs grep mp4
but these were
On Mon, 8 Jun 2009 21:05:20 +0200, Stefan Miklosovic
miklosovic.free...@gmail.com wrote:
title says it, i downloaded mp4 file by youtube-dl,
but it downloaded video and audio as well. I would
like to separate audio from that file.
Maybe mplayer can do that for you. It has options -dumpvideo
On Mon, Jun 08, 2009 at 11:56:35AM -0600, ericr wrote:
Hi,
I need to buy some new servers, and mgmt has decreed that we get them from
someplace which will provide service contracts with on-site h/w suppport,
which means HP, Dell, Sun, IBM, etc.
Our group has a lot of Dells from Poweredge
On Mon, Jun 08, 2009 at 05:29:28PM +0200, Samuel Martín Moro wrote:
Hi all.
I'm trying to format an USB key with mkntfs (I tried with 1.13.1_5 and
2.0.0).
Whatever I do, it never works.
Some of results I got:
(with 2.0.0)
~# mkntfs -F -p 63 -H 255 -S 63 /dev/da0s1
/dev/da0s1 is not a
Maybe mplayer can do that for you. It has options -dumpvideo
and -dumpaudio. As you know, mplayer / mencoder can do everything
that you can imagine. :-)
-dumpaudio -vc dummy will dump audio and skip video decoding at all
___
On Sun, Jun 07, 2009 at 11:52:17PM -0500, Lars Eighner wrote:
What I need most is to find (a) make tutorial(s) that do not suppose make is
being used for compling c/c++ programs. Yes, I know, that is mostly why
make exists, but many tutorials plunge right into C examples with implicit C
Hi,
I need to buy some new servers, and mgmt has decreed that we get
them from
someplace which will provide service contracts with on-site h/w
suppport,
which means HP, Dell, Sun, IBM, etc.
I have two Intel servers that I like a lot. I don't have on-site
support, but it might be
On Mon, Jun 08, 2009 at 04:45:43AM -0400, Jerry wrote:
I have used GoDaddy for 7 years now without a single problem. Maybe I
am just lucky. I have only contacted them twice; however, I received
a quick and courteous response to my inquiry.
I try to learn from others' mistakes to reduce the
Dino Vliet dino_vl...@yahoo.com writes:
[* ] [8.6b1] comm comm.test!Connect to remote failed: couldn't
open socket: connection timed out
Taking a look in the comm.test file, it looks to me like you already had
something on port 12345, so an attempt to open such a port failed.
--
On Mon, 8 Jun 2009 22:12:17 +0200, Roland Smith rsm...@xs4all.nl wrote:
On Sun, Jun 07, 2009 at 11:52:17PM -0500, Lars Eighner wrote:
What I need most is to find (a) make tutorial(s) that do not suppose make is
being used for compling c/c++ programs. Yes, I know, that is mostly why
make
On Mon, 8 Jun 2009 14:55:49 -0600
Chad Perrin per...@apotheon.com wrote:
I try to learn from others' mistakes to reduce the likelihood that I
will be forced to learn from my own. If you really want to learn from
your own mistakes, though, go ahead and ignore the instances where
GoDaddy has
Daniel Underwood wrote:
I'm looking for a way to manage my personal collection of research
articles. Ideally I'd like some way to keep records on authors,
keywords, journals, and publication years of articles (PDF files)
downloaded onto my local drive.
In the course of reading literature for
On Mon, 8 Jun 2009 17:17:29 -0400, Daniel Underwood djuatde...@gmail.com
wrote:
I'm looking for a way to manage my personal collection of research
articles. Ideally I'd like some way to keep records on authors,
keywords, journals, and publication years of articles (PDF files)
downloaded onto
I'm looking for a way to manage my personal collection of research
articles. Ideally I'd like some way to keep records on authors,
keywords, journals, and publication years of articles (PDF files)
downloaded onto my local drive.
In the course of reading literature for research, it often happens
Poly and LoH: Thanks, these are great ideas!
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
On Mon, Jun 08, 2009 at 05:17:29PM -0400, Daniel Underwood wrote:
I'm looking for a way to manage my personal collection of research
articles. Ideally I'd like some way to keep records on authors,
keywords, journals, and publication years of articles (PDF files)
downloaded onto my local
Daniel Underwood djuatde...@gmail.com wrote:
I'm looking for a way to manage my personal collection of research
articles. Ideally I'd like some way to keep records on authors,
keywords, journals, and publication years of articles (PDF files)
downloaded onto my local drive.
In the course
On Mon, 8 Jun 2009 17:45:38 -0400, Daniel Underwood djuatde...@gmail.com
wrote:
Poly and LoH: Thanks, these are great ideas!
I'd like to add that if you define your data fields well, you
can use it to generate BibTeX and other LaTeX entries from your
records.
You can even easily turn it into
On Mon, Jun 8, 2009 at 10:17 PM, Daniel Underwooddjuatde...@gmail.com wrote:
I'm looking for a way to manage my personal collection of research
articles. Ideally I'd like some way to keep records on authors,
keywords, journals, and publication years of articles (PDF files)
downloaded onto my
--
Mike Jeays
http://www.jeays.ca
http://www.rotarycpmm.ca
On June 8, 2009 02:56:31 pm Jos Chrispijn wrote:
Found another solution (for running @ 23:58):
58 23 * * * [ `date -d tomorrow +%d` -eq '01' ] /myscript
thanks for all other suggestions,
Jos Chrispijn
On Saturday 06 June 2009 20:44:38 Tim Judd wrote:
On 6/4/09, Peter fb...@peterk.org wrote:
I do not think /etc/hosts does round robin, I always assumed first match
wins...DNS/bind I would understand...
It's the same library call: gethostbyname(3) and friends.
Why does ping always return
On Sunday 07 June 2009 23:49:48 Ian Smith wrote:
Thanks, but please humour my ignorance - would one install linux libusb
in /compat/linux for linux apps, as well as the freebsd port for native?
If there's source, one would use native libusb. I'd go test with -current
though. The libusb in the
I have following hardware on my laptop:
dmesg|grep vga
vgapci0: VGA-compatible display port 0x6110-0x6117 mem
0x9000-0x903f,0x8000-0x8fff irq 16 at device 2.0 on pci0
agp0: Intel GM45 SVGA controller on vgapci0
vgapci1: VGA-compatible display mem 0x9450-0x945f at
not surprisingly, i found a fla w in my getc(fp) program that
tried to read past ? and ? ... the example i added to my
test file was simply the 2 bytes and ?. so if you have a
stray
?
with a matching close case, the binary hangs on a read.
Gary,
On Mon, Jun 8, 2009 at 8:15 PM, Gary Klinekl...@thought.org wrote:
not surprisingly, i found a fla w in my getc(fp) program that
tried to read past ? and ? ... the example i added to my
test file was simply the 2 bytes and ?. so if you have a
stray
On Thursday 04 June 2009 18:25:30 L Campbell wrote:
PID USERNAME THR PRI NICE SIZERES STATE C TIME WCPU COMMAND
85542 www1 510 102M 85360K CPU6 6 16:34 100.00% lighttpd
1) Should this be possible? What is going on here?
Change the write-backend. Look in
On Thursday 04 June 2009 21:14:14 Ashish SHUKLA wrote:
Hi all,
I've recently installed 7.2-RELEASE few weeks ago and noticed that it
panics after few minutes of loading snd_ds1 (driver for Yamaha PCI sound
card), and playing music on it. I've not added snd_ds1 to my loader.conf
so as soon as
Hi,
I'm looking for a way to manage my personal collection of research
articles. Ideally I'd like some way to keep records on authors,
keywords, journals, and publication years of articles (PDF files)
downloaded onto my local drive.
Certainly overkill, but dspace(.org) can keep up a digital
On Mon, Jun 8, 2009 at 8:34 PM, Mel
Flynnmel.flynn+fbsd.questi...@mailing.thruhere.net wrote:
On Thursday 04 June 2009 18:25:30 L Campbell wrote:
PID USERNAME THR PRI NICE SIZE RES STATE C TIME WCPU COMMAND
85542 www 1 51 0 102M 85360K CPU6 6 16:34 100.00% lighttpd
On Mon, Jun 08, 2009 at 08:20:22PM -0400, Glen Barber wrote:
Gary,
On Mon, Jun 8, 2009 at 8:15 PM, Gary Klinekl...@thought.org wrote:
not surprisingly, i found a fla w in my getc(fp) program that
tried to read past ? and ? ... the example i added to my
test file was
What UFS-like filesystem has unlimited inodes, but is a drop-in
replacement for ext3, and is fairly easy to configure?
Is UFS2 no longer considered the best general-use filesystem?
Reason I ask: I'm going to create many small (~1K) files on a 100G
disk and thus need at least 100M inodes.
newfs
On Jun 8, 2009, at 11:59 AM, Tim Judd wrote:
If that's related to 'world', all world-related build options should
be placed in src.conf now. What make.conf was to world+ports, is now
src.conf = world, make.conf = ports
What is the appropriate location for KERNCONF, which I still have in /
Laptop VGA cards are only two types: independently driven, or
mirrored. The former is what allows the internal and external to
display different things simultaneously. The latter is a 1:1 mirror
image on one and other. All laptops I've seen when the external VGA
is enabled are mirrored. Via
On Mon, 8 Jun 2009 17:17:29 -0400,
Daniel Underwood djuatde...@gmail.com said:
D In the course of reading literature for research, it often happens that I
D find myself wanted to return to something I have previously read, but I
D only recall a few things about the article, often the author
On Mon, 8 Jun 2009 11:56:35 -0600,
ericr erobi...@gmail.com said:
E Has anyone bought servers from one of the big manufacturers lately and had
E good luck with them?
I've always had good luck with Dell, especially the GX-260s. I've used
them for file-servers handling over 100 Samba
Tim Judd wrote:
Laptop VGA cards are only two types: independently driven, or
mirrored. The former is what allows the internal and external to
display different things simultaneously. The latter is a 1:1 mirror
image on one and other. All laptops I've seen when the external VGA
is enabled are
Since all the PDFs contain text (none are scanned images), can I
simply use some command like grep to search for text within the
collection? If so, how would I do this? Can grep read text from
within PDFs?
___
freebsd-questions@freebsd.org mailing list
On Friday 05 June 2009 09:12:08 Paul B. Mahol wrote:
On 6/5/09, Yuri y...@rawbw.com wrote:
How can I see processes in a hierarchical way?
http://lists.freebsd.org/pipermail/svn-src-head/2009-May/006912.html
or pstree from ports.
And if in a jail, you can use the patch below to add jail
Since all the PDFs contain text (none are scanned images), can I
simply use some command like grep to search for text within the
collection? If so, how would I do this? Can grep read text from
within PDFs?
pdftotext, comes with the port xpdf I think
Olivier
OK, this is perhaps a weird question, capable of being very confusing.
So let's take a for instance.
Suppose I run something like the Linux command fdupes on a directory
with many large files. This operation will take considerable time to
complete. When it completes, a lot of output is send to
On Mon, Jun 8, 2009 at 10:44 PM, Daniel Underwood djuatde...@gmail.comwrote:
OK, this is perhaps a weird question, capable of being very confusing.
So let's take a for instance.
Suppose I run something like the Linux command fdupes on a directory
with many large files. This operation will
On Mon, Jun 8, 2009 at 10:21 PM, Olivier Nicole o...@cs.ait.ac.th wrote:
Since all the PDFs contain text (none are scanned images), can I
simply use some command like grep to search for text within the
collection? If so, how would I do this? Can grep read text from
within PDFs?
On Jun 8, 2009, at 8:48 PM, Lord Of Hyphens wrote:
On Mon, Jun 8, 2009 at 10:44 PM, Daniel Underwood djuatde...@gmail.com
wrote:
$ fdupes -r ~/directorywithlotsoflargefiles
(.lots of output, woops, should have sent to a text file!)
$ output[1] ~/textfile.txt
Hopefully this has
1 - 100 of 105 matches
Mail list logo
