On 06/29/11 15:57, Joshua Boyd wrote:
2011/6/29 O. Hartmann ohart...@zedat.fu-berlin.de
mailto:ohart...@zedat.fu-berlin.de
Questions:
a) Is this an issue of FreeBSD 8.2-STABLE or is it a firmware/BIOS
issue which can be solved?
Hi Oliver,
Neither, unfortunately. The 1068E based
Hi Practitioners,
I’m conducting a short study to identify what awareness information does the
administrator/decision maker (Configuration Control Board members) should
know/aware while completing some of the tasks below.
Task 1 – Tasks to analyse the proposed change request
Task 2 – Tasks of
Op 29-6-2011 23:45, Gary Gatten schreef:
2 Mega Bytes? Surely that's a typo, but is it 200MB? 2GB?
Those that know ZFS will want to know the primary use / load of this system.
It was a typo for sure. Should be 2GB
It will be a server, so no X
FAMP
Mailserver for 10 users (imap)
Nameserver
Hi,
I’m conducting a short study to identify what awareness information does the
administrator/ decision maker (Configuration Control Board members) should
know/aware while completing some of the tasks below.
Task 1 – Tasks to analyse the proposed change request
Task 2 – Tasks of determining
On solaris you can have different BE's (boot environments) using ZFS.
Is this possible with FreeBSD ZFS? I can't recall ever have seen a tool
like BEadm (solaris).
But maybe using ZFS manually I can get more BE's?
___
freebsd-questions@freebsd.org
Hello all.
I have a question about FreeBSD 64Bit Applications
I want to install FreeBSD 64 Bit to have most memory10 GB ram or up ,
and to make more stable.
My questions is .is FreeBSD 64 Bit stable and Rock such as 32 bit ?
These standard applications are
On 30 June 2011 09:06, John Dakos gda...@enovation.gr wrote:
Hello all.
I have a question about FreeBSD 64Bit Applications
I want to install FreeBSD 64 Bit to have most memory10 GB ram or up ,
and to make more stable.
My questions is .is FreeBSD 64 Bit stable and Rock
On 30 June 2011 08:43, Dick Hoogendijk d...@nagual.nl wrote:
On solaris you can have different BE's (boot environments) using ZFS.
Is this possible with FreeBSD ZFS? I can't recall ever have seen a tool
like BEadm (solaris).
But maybe using ZFS manually I can get more BE's?
On Wed, 29 Jun 2011, per...@pluto.rain.com wrote:
Steve Polyack kor...@comcast.net wrote:
... An occaisional fat-finger in /etc/fstab may cause one to
end up in single-user mode ... some of these systems have a LOM
(lights-out management) controller which shares the system's
on-board NICs
Em Qui, 2011-06-30 às 11:06 +0300, John Dakos escreveu:
For me I am very satisfied with the 8.2R P2 64bit.
I run about 50-60 servers 24/7 in mission critic applications
using ZFS, with a mix of ISP, databases (postgresql, firebird...),
large asterisk IP centrals, vpn servers (400 vpns...), and
On 6/30/2011 6:49 AM, Daniel Feenberg wrote:
On Wed, 29 Jun 2011, per...@pluto.rain.com wrote:
Steve Polyack kor...@comcast.net wrote:
... An occaisional fat-finger in /etc/fstab may cause one to
end up in single-user mode ... some of these systems have a LOM
(lights-out management)
On 6/30/2011 1:10 AM, per...@pluto.rain.com wrote:
Steve Polyackkor...@comcast.net wrote:
... An occaisional fat-finger in /etc/fstab may cause one to
end up in single-user mode ... some of these systems have a LOM
(lights-out management) controller which shares the system's
on-board NICs ...
On Thu, 30 Jun 2011, Dieter BSD wrote:
google found
http://www.daemonforums.org/showthread.php?p=27601
which suggests using moused instead of hald. moused runs,
but I think I have to get Xorg to use a config file to set
Option AllowEmptyInput off
Option AutoAddDevices off
so that it will
On Wed, Jun 29, 2011 at 5:27 PM, Gary Gatten ggat...@waddell.com wrote:
Of course it depends on your apps, but unless you're doing some HUGE number
of connections, or your apps are not good, this will be MORE than
enough RAM and CPU.
(...)
Maybe turn this into a virtual host and make
Hi,
Does anyone know that this card NC522SFP is supported under FreeBSD ?
http://h18000.www1.hp.com/products/servers/networking/nc522sfp/index.html
Regards
___
freebsd-questions@freebsd.org mailing list
Quoting C. P. Ghost cpgh...@cordula.ws:
On Wed, Jun 29, 2011 at 5:27 PM, Gary Gatten ggat...@waddell.com wrote:
Of course it depends on your apps, but unless you're doing some
HUGE number of connections, or your apps are not good, this
will be MORE than enough RAM and CPU.
(...)
On Jun 29, 2011, at 9:33 PM, Dieter BSD wrote:
Q1: how do you start X?
Xorg
(no config file)
result: display works (1400x1050), but no keyboard or mouse
Xorg -configure
(creates /root/xorg.conf.new)
Xorg -config /root/xorg.conf.new
result: 1280x1024 which monitor doesn't like
On Jun 30, 2011, at 6:11 AM, Warren Block wrote:
On Thu, 30 Jun 2011, Dieter BSD wrote:
google found
http://www.daemonforums.org/showthread.php?p=27601
which suggests using moused instead of hald. moused runs,
but I think I have to get Xorg to use a config file to set
Option
This is what I use in my xorg.conf
see below
Notice the mode line for resolution, and HorizSync30-107
VertRefresh 48-120
Also in my /etc/rc.conf I put these lines
hald_enable=YES
dbus_enable=YES
This sets up X for me every time and works great.
Section ServerLayout
On Thu, Jun 30, 2011 at 4:53 PM, eculp ec...@encontacto.net wrote:
Quoting C. P. Ghost cpgh...@cordula.ws:
On Wed, Jun 29, 2011 at 5:27 PM, Gary Gatten ggat...@waddell.com wrote:
Of course it depends on your apps, but unless you're doing some HUGE
number of connections, or your apps are
That is incorrect. Don't set AllowEmptyInput, just turn off AutoAddDevices.
http://www.wonkity.com/~wblock/docs/html/aei.html
I reduced the config file to:
Section ServerLayout
Identifier X.org Configured
# Screen 0 Screen0 0 0
InputDevice Mouse0 CorePointer
On Thu, 30 Jun 2011 16:12:28 +, Dieter BSD wrote:
Now to see if I can get this wimpy rage xl to do 1920x1080.
If configuring this via X doesn't work, there's always xrandr
which you can call from your ~/.xinitrc (or ~/.xsession
respectively), like this:
xrandr --fb 1920x1080
I'm running squid on a proxy server for several years and now my boss
wants usage reports organized by users' login names instead of IP
addresses. We're in an Active Directory environment and use Kerberos
authentication. I googled around and used this link:
Hi all
Sadly the Concurrent Servers section under Interprocess Communication in
FreeBSD Developers' Handbook ends without a example server code.
Can somebody kindly provide an example code for a Concurrent Server preferably
with pthreads in C?
Appreciate very much if the above mentioned
On Thursday 30 June 2011 09:19:33 Jack L. Stone wrote:
Has anyone had any luck lately with installation and use of Horde -- either
v-3.3 or ver-4 ??
I've tried for days to get the 3.3 version (with apps IMP, INGO Tuba) to
work and noted that the ports say that horde4 is broken. I've googled
Now to see if I can get this wimpy rage xl to do 1920x1080.
Please don't mess with modelines, it should not be needed any more.
Just set the resolutions desired in the Screen/Display section. If
modelines are really required, get them out of /var/log/Xorg.0.log.
But they almost certainly
Hi Chris,
On Friday 01 of July 2011 00:34:52 Chris Brennan wrote:
Greetings!
While trying to learn IPv6 as best as I can and messing with my Linksys
WRT54Gv3 router running DD-WRT, I realized that it cannot properly do
IPv6 yet. This leaves me rather limited. More then once some people on
2011-06-30 23:42, Dieter BSD skrev:
Now to see if I can get this wimpy rage xl to do 1920x1080.
You can't. Mach64 does not support that resulution.
Please don't mess with modelines, it should not be needed any more.
Just set the resolutions desired in the Screen/Display section. If
On Tue, Jun 28, 2011 at 06:50, Dr. A. Haakh bugrepor...@haakh.de wrote:
Polytropon schrieb:
On Mon, 27 Jun 2011 06:40:27 -0700, Kurt Buff wrote:
Your advice sounds reasonable, but that site seems devoted to zfs
bootables.
I wonder if an 8.1 livefs iso will do the trick...
Check if you
This email newsletter was sent to you in graphical HTML format.
If you're seeing this version, your email program prefers plain text emails.
You can read the original version online:
http://ymlp56.net/zg6cET
--As of June 30, 2011 6:34:52 PM -0400, Chris Brennan is alleged to have
said:
While trying to learn IPv6 as best as I can and messing with my Linksys
WRT54Gv3 router running DD-WRT, I realized that it cannot properly do
IPv6 yet. This leaves me rather limited. More then once some people on
On 30/06/2011 23:42, Dieter BSD wrote:
Now to see if I can get this wimpy rage xl to do 1920x1080.
Please don't mess with modelines, it should not be needed any more.
Just set the resolutions desired in the Screen/Display section. If
modelines are really required, get them out of
32 matches
Mail list logo
