See
http://www.nber.org/prefs/
On Sat, 29 Jun 2013, Upali Kulasekara wrote:
Thank you very much for subscribing me for your mailing list.
Upali
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-ques
Thanks for your help. But before I attempt disabling the cdrom, I would like to
mention that I can already see the following devices (with corresponding .init
and .lock files) :
cuaU0.0
cuaU0.1
cuaU0.2
cuau0
I am almost certain that cuaU0.0 is the modem. I will try disabling the the
cdrom and
In that case, try disabling the cdrom and see if you make headway.
On 30 June 2013 13:29, Manish Jain wrote:
> Thanks for your help. But before I attempt disabling the cdrom, I would
> like to mention that I can already see the following devices (with
> corresponding .init and .lock files) :
>
Hello Odhiambo/All,
I installed and ran minicom. There are 2 devices which are possible
candidates as the modem : cuaU0.0 and cuaU0.2
I symlinked modem to each of the 2 devices and ran minicom. With both
devices, the AT command returns OK, but AT^U2DIAG=0 returns COMMAND NOT
SUPPORT
Any ti
Hi Manish,
If you have a Windows PC, use putty.exe and point the config to the COM
port on which the modem is detected to be attached to.
That's how I do it, unfortunately.
On 30 June 2013 16:51, Manish Jain wrote:
> Hello Odhiambo/All,
>
> I installed and ran minicom. There are 2 devices whi
Hi All,
I get an application crashing. Build some libs with debug symbols.
Here is the gdb log:
-
Program received signal SIGSEGV, Segmentation fault.
[Switching to Thread 809806400 (LWP 101133/photoprint)]
strtol_l (nptr=0x0, endptr=0x0, base=10, locale=)
at /usr/src/lib/libc/stdlib/strtol.c:
Trouble viewing this email? View in a browser
https://email.animoto.com/pub/sf/FormLink?_ri_=X0Gzc2X%3DWQpglLjHJlYQGhJNjXEKEASSc3q9jvBK4o3ffC2laRCVXMtX%3DWQpglLjHJlYQGjLJm6MhC02SFrsIiY5l2YAMelipMzc3&_ei_=EtmRArNO2XWwP3EOZcn0NKGKZhJ87jFkaNx_8bb_R8E2gVDpwEM0wm3j6g.Jg%3D%3D
“BIG IDEA MASTERMIND”
On Sun, Jun 30, 2013 at 5:36 PM, Boris Samorodov wrote:
> Hi All,
>
> I get an application crashing. Build some libs with debug symbols.
> Here is the gdb log:
> -
> Program received signal SIGSEGV, Segmentation fault.
> [Switching to Thread 809806400 (LWP 101133/photoprint)]
> strtol_l (nptr
Hello Odhiambo/All,
I seem to have made some progress but final success still eludes me.
With modem symlinked to cuaU0.0, this is what happens is minicom :
AT^GETPORTMODE
^GETPORTMODE:TYPE:EV-DO:Qualcomm,MDM:0,DIAG:1,PCUI:2,CDROM:3
OK
AT^SETPORT="A1;1,2,3"
COMMAND NOT SUPPORT
AT^GETPORTMODE
What model of Huawei is the modem? E-what??
On 30 June 2013 19:23, Manish Jain wrote:
>
> Hello Odhiambo/All,
>
> I seem to have made some progress but final success still eludes me. With
> modem symlinked to cuaU0.0, this is what happens is minicom :
>
> AT^GETPORTMODE
> ^GETPORTMODE:TYPE:EV-
30.06.2013 19:53, Fernando Apesteguía пишет:
> On Sun, Jun 30, 2013 at 5:36 PM, Boris Samorodov wrote:
>
>> Hi All,
>>
>> I get an application crashing. Build some libs with debug symbols.
>> Here is the gdb log:
>> -
>> Program received signal SIGSEGV, Segmentation fault.
>> [Switching to Th
EC156 is what the label on the modem says, which is the response given
by AT+GMM. 0x140b is the chipset.
Regards,
Manish Jain
+91-88064-38388
On 30-Jun-13 22:02, Odhiambo Washington wrote:
What model of Huawei is the modem? E-what??
On 30 June 2013 19:23, Manish Jain mailto:bourne.ident...
If the Huawei modem does not accept AT^U2DIAG=0, then I must say I have
given up. That command has worked with all Huawei modems I have seen: E160,
E1820, E1750, E173...
On 30 June 2013 21:19, Manish Jain wrote:
> EC156 is what the label on the modem says, which is the response given by
> AT+
Sorry for typo. 0x140b is the product ID under vendor Huawei (vendor id
0x12d1).
Regards,
Manish Jain
+91-88064-38388
On 30-Jun-13 23:49, Manish Jain wrote:
EC156 is what the label on the modem says, which is the response given
by AT+GMM. 0x140b is the chipset.
Regards,
Manish Jain
+91-880
On Sun, Jun 30, 2013 at 6:58 PM, Boris Samorodov wrote:
> 30.06.2013 19:53, Fernando Apesteguía пишет:
> > On Sun, Jun 30, 2013 at 5:36 PM, Boris Samorodov wrote:
> >
> >> Hi All,
> >>
> >> I get an application crashing. Build some libs with debug symbols.
> >> Here is the gdb log:
> >> -
>
15 matches
Mail list logo