On Fri, 30 May 2003, Antoine Jacoutot wrote:
> How can I rescan the USB bus so that when I plug my external USB hard
> drive, it gets recognize as umass0 ?
Add
usbd_enable="YES"
to your /etc/rc.conf and reboot.
-Warren Block * Rapid City, South Dakota USA
__
On Fri, 30 May 2003, Antoine Jacoutot wrote:
> The thing is it would be so much easier if we could enter NIS network
> groups as some other Unices allow it.
> But thanks for the script :)
Garance Drosihn was talking about adding that ability to lpd a while
back and asking for suggestions; I'm not
On Fri, 30 May 2003, Fehmi wrote:
> How to lunch and configure a telnet and a ftp servers
> on Freebsd 4.5
> Thanks everybody
uncomment the proper lines in /etc/inetd.conf
#
#ftpstream tcp nowait root/usr/libexec/ftpd ftpd -l
#ftpstream tcp6nowait root/usr/libex
On Thu, 29 May 2003, Eduardo Viruena Silva wrote:
> On Thu, 29 May 2003, Warren Block wrote:
[after adding entries to /etc/mail/access]
> > make maps
> >
> > is easier. See /etc/mail/Makefile.
>
> dont you have to restart sendmail?
Not for changes to access. 'make maps' is enough.
-Warren Bl
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi !
How can I rescan the USB bus so that when I plug my external USB hard
drive, it gets recognize as umass0 ?
It works great when I boot up with the HDD plug-in, but when my box is
already on, if I plug the HDD, nothing happens and I can't mount i
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Friday 30 May 2003 13:29, Konrad Heuer wrote:
> What about the following shell script? Should work for you, if you
> replace 192.168.1 by your real network address:
Yes, I though about a shell script, I think I'll do that.
The thing is it would be
Rich Morin <[EMAIL PROTECTED]> writes:
> At 3:04 AM -0500 5/30/03, Bingrui Foo wrote:
> >I'm wondering in freeBSD, if I have a directory with 10,000 files, or
> >maybe even 100,000 files, each about 5 kb long. Wondering will reading and
> >writing to any one of these files in C be affected by the
> > someone please tell me how to make a kld sleep for specified number of
> > microseconds
> >
> > its urgent.
>
> nanosleep (microseconds*1000);
In the kernel? Surely not.
I think you'd need to explicitly run the scheduler, and probably use a
timer event to resume later. There are establis
Hi,
Does anyone use pam-pgsql + saslauthd? I did everything according to
the given instructions in pam-pqsql readme file but it doesn't work
anyway. This is what is writes in auth.log file:
==
May 29 14:10:15 hm saslauthd[69967]: in openpam_load_module(): no
/usr/lib/pam_pgsql.so found
May 2
How to lunch and configure a telnet and a ftp servers
on Freebsd 4.5
Thanks everybody
___
Do You Yahoo!? -- Une adresse @yahoo.fr gratuite et en français !
Yahoo! Mail : http://fr.mail.yahoo.com
___
Why bother with worrying about this or that pop server. Install the pop
server that best fits your situation and then run stunnel by itself to
provide secure smtp, pop3 or imap. We do this exact thing with cyrus,
stunnel didn't care what it was...
Sincerely,
Robert T. Covell
President / Owner
R
Greg 'groggy' Lehey wrote:
On Friday, 30 May 2003 at 11:16:06 +0200, Per olof Ljungmark wrote:
Using Vinum on 4.7-RELEASE-p10, I wonder what can be done to optimize
performance. So far I am not impressed but perhaps I did not configure
Vinum optimal, grateful for any hints thanks.
You haven't sa
someone is probably using formmail.pl - pull it! or hard code the address
the form info is sent to within the formmail script.
On Fri, 30 May 2003, DanB wrote:
> How do I stop mail relaying with Apache? My mail server has been black
> listed.
>
> Dan
>
> _
On Friday, 30 May 2003 at 11:57:47 +0100, Tom Stockton wrote:
> Apologies for stupidity, I've read the documentation a million times and
> I've got a headache.
>
> I've installed 4.7 release from an ftp server, I want to get the latest
> ports collection to match this release. It looks like I w
Sounds like damagement to me :) People use the wrong words all the time -
like "I switched servers" meaning they changed ISPs etc..
On Thu, 29 May 2003, Dragoncrest wrote:
> Ok, either I'm getting senial, or it's too late at night. Had a gentleman
> ask me today to setup some stuff on h
On Fri, 30 May 2003, Antoine Jacoutot wrote:
> How can I set permissions on LPD spooler. I would like an entire network
> to be able to print while another must not.
> Obviously, the hosts.lpd file does not accept network range nor NIS
> netgroups...
> I don't feel like entering hundreds of @ip b
Apologies for stupidity, I've read the documentation a million times and
I've got a headache.
I've installed 4.7 release from an ftp server, I want to get the latest
ports collection to match this release. It looks like I want to specify
'ports-all' in my cvsup file, however a note in the docu
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi !
How can I set permissions on LPD spooler. I would like an entire network
to be able to print while another must not.
Obviously, the hosts.lpd file does not accept network range nor NIS
netgroups...
I don't feel like entering hundreds of @ip by
How do I stop mail relaying with Apache? My mail server has been black
listed.
Dan
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
On Friday, 30 May 2003 at 11:16:06 +0200, Per olof Ljungmark wrote:
> Using Vinum on 4.7-RELEASE-p10, I wonder what can be done to optimize
> performance. So far I am not impressed but perhaps I did not configure
> Vinum optimal, grateful for any hints thanks.
You haven't said what your problem is
For the archives:
DefaultServer On needed to be set. It is/was commented out ( by default?
).
The DefaultServer directive controls which server configuration is used
as the default when an incoming connection is destined for an IP address
which is neither the host's primary IP address or one of
At 2:05 AM -0700 5/30/03, Kent Stewart wrote:
Did you try doing it in /boot/loader.conf.
The man page indicates that I can set assorted variables in this file,
so perhaps I could put in a line such as:
hw.ata.ata_dma=0
If so, the sysctl.conf(5) man page should be amended to indicate the
fact. N
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi,
I have a strange error trying to build fwbuilder from the ports
collection:
# make install clean
===> Extracting for fwbuilder-1.0.10_1
>> Checksum OK for fwbuilder-1.0.10.tar.gz.
===! Running aclocal
aclocal: not found
*** Error code 127
Stop
Hi Oliver,
Thanks for your reply. I do not block any out going tcp or udp traffic
as this machine is used only by myself. For that I have the following
rules:
$fwcmd add 00303 allow tcp from any to any out setup keep-state
$fwcmd add 00405 allow udp from any to any out
Do you think the setup ke
Using Vinum on 4.7-RELEASE-p10, I wonder what can be done to optimize
performance. So far I am not impressed but perhaps I did not configure
Vinum optimal, grateful for any hints thanks.
Machine is dual PII450 using the sym scsi driver.
Plex vn0.p0:Size: 63698940928 bytes (60748 MB)
On Friday 30 May 2003 01:54 am, Rich Morin wrote:
> At 9:40 PM -0400 5/29/03, Jud wrote:
> >This was a common problem along about 4.5-4.6. Upgrade to at least
> >4.7, see if it helps; the cause of the common problem was fixed in
> >4.7- prerelease.
>
> I've been running "FreeBSD 4.7-RELEASE" on my
At 9:40 PM -0400 5/29/03, Jud wrote:
This was a common problem along about 4.5-4.6. Upgrade to at least
4.7, see if it helps; the cause of the common problem was fixed in
4.7- prerelease.
I've been running "FreeBSD 4.7-RELEASE" on my production system, so I
tried moving the disks over and booting.
> allow tcp from any to x.x.x.x/24 20,21,22,25,53,80,443 setup
On ACTIVE FTP, the client initiate the connection to the port 21, but
the server initiate the connection from the port 20.
So you should open the port 20 with a rule like:
allow tcp from x.x.x.x/24 20 to any setup
Beside, if you hav
Hi People,
I have installed the latest stable release of proftpd on my server
(1.2.8) and I am getting the error message:
"500 Sorry, no server available to handle request on domain.com"
I can connect via the localhost though so I assume it's got something to
do with my firewall even though I ha
At 3:04 AM -0500 5/30/03, Bingrui Foo wrote:
I'm wondering in freeBSD, if I have a directory with 10,000 files, or
maybe even 100,000 files, each about 5 kb long. Wondering will reading and
writing to any one of these files in C be affected by the sheer number of
these files? Will the access time b
Hi,
I'm wondering in freeBSD, if I have a directory with 10,000 files, or
maybe even 100,000 files, each about 5 kb long. Wondering will reading and
writing to any one of these files in C be affected by the sheer number of
these files? Will the access time be affected significantly?
Just wonderin
> yeah lets get some details in there. the users of this application are
> windows outlook users wanting to download their email while they travel - so I
> think my options are to go for mbox support, no?
That is unrelated. This is a matter of choice, whether your MDA does
mbox or maildir (are al
Greetings!
Can anybody help me to solve this -
I've got RBEM10/100+56k PCMCIA card and I can't get it work.
Because my cardBus - it's 32-bit, and driver is 16-bit.
I've got a message at startup pcmcia: 32-bit cardbus is unsupported
and as result if_xe.ko is unloaded with strange fhdjklsah - if I t
On Thu, 29 May 2003 23:34:41 -0700, Bryan Vyhmeister wrote
> On Thursday, May 29, 2003, at 11:23 PM, admin wrote:
>
> > I am looking to set up a secure pop server on one of my FreeBSD 4.8
> > Stable
> > boxes. Can somebody send me in the right direction? Recommend
> > software and
> > provide
On Thursday, 29 May 2003 at 21:30:37 -0400, Tom Parquette wrote:
> I was installing an additional hard disk and I believe I commented out
> the wrong line in fstab or typo'ed something. The /usr filesystem is
> not mounted. The machine will not boot to a command prompt so I can
> repair it. It c
On Thursday, May 29, 2003, at 11:23 PM, admin wrote:
I am looking to set up a secure pop server on one of my FreeBSD 4.8
Stable
boxes. Can somebody send me in the right direction? Recommend
software and
provide links?
A POP3 server like cucipop works very nicely. It is found in
/usr/ports/mai
Noah,
> I am looking to set up a secure pop server on one of my FreeBSD 4.8 Stable
It depends on other requierements you have.
I wanted APOP authentication as well as SSL, so I choosed WU-IMAP.
But if I had wanted maildir format of inboxes, I'd have looked at
courrier-imap.
Now that was some y
I am looking to set up a secure pop server on one of my FreeBSD 4.8 Stable
boxes. Can somebody send me in the right direction? Recommend software and
provide links?
- Noah
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/
Hi Brian,
It's been a long time. I hope you've fixed the problem by now.
But if you haven't, and for the sake of others, I solved this problem
by:
In XFree-4_libraries port:
make deinstall
Then
make install
or 'portupgrade' or what you like.
Something obviously went wrong with the port. rein
On Fri, 30 May 2003, Alfonso Romero wrote:
> There must be an event associated with pressing the tab key. For example, in
> Visual Basic you can use the On_keypress event, or something like that (it´s
> been a long time since my last program in VB) to detect if the user has
> pressed a special key
On Fri, 30 May 2003, Eduardo Viruena Silva wrote:
> For many years I have used several GUI, but I never have
> learnt to include a "tab" char in an input box.
>
> Tab char always changes the graphic item you are working with,
> v. gr. I'm using SquirrelMail to write this text. If I
> press "tab
There must be an event associated with pressing the tab key. For example, in
Visual Basic you can use the On_keypress event, or something like that (it´s
been a long time since my last program in VB) to detect if the user has
pressed a special key, like tab or insert, and then use it for what you w
For many years I have used several GUI, but I never have
learnt to include a "tab" char in an input box.
Tab char always changes the graphic item you are working with,
v. gr. I'm using SquirrelMail to write this text. If I
press "tab" the focus of my web browser changes to the "send"
button.
Anurag Chaudhary wrote:
I used nanosleep() in my device driver, but it crashed the kernel saying
pagefault in kernel mode.
Can anybody please suggest some other method to be used in a kld to sleep
When you put the kernel to sleep, what were you expecting to wake it up? :-)
A literal answer would
I used nanosleep() in my device driver, but it crashed the kernel saying
pagefault in kernel mode.
Can anybody please suggest some other method to be used in a kld to sleep
thanx
Anurag
_
Attention NRIs! Send money to India.
http://
> For the max in firewall
> protection you should use IPFILTER/IPNAT the other Firewall that is
> included with FBSD. IPFW2 is over bloated with functions which are
> so special purpose that no one uses. I know the FBSD manual kind of
> infers that ipfw is the preferred firewall but it really is n
Assuming you are installing from ports, you can install MySQL so that
it leaves the current installation untouched. Check the Makefile for
the exact variable name. As others have pointed out, it would be a
great idea to initiate a backup first just in case.
abs
On Thursday, May 29, 2003, at
Please send all responses to [EMAIL PROTECTED] I am not currently
subscribed to this list.
I have a Logitech Cordless Desktop Pro Keyboard with a Logitech Cordless
MouseMan Optical, both USB. For some reason I can't get them to work in
FreeBSD 4.8, However they both work fine in FreeBSD 5.0. I
* Elden Fenison [05/29/2003 18:38]:
> * Sheldon Hearn [05/15/2003 18:36]:
> > I can't get mutt-1.5.4 to respond to the "End" key in an XFree86-4.3.0
> > xterm on FreeBSD 5.1-BETA. It's been happening ever since I started
> > with mutt a few months back, but it's only just pissed me off enough
> >
On Thu, May 29, 2003 at 06:08:53PM +0200, Ian Barnes wrote:
> Hi,
>
> I want to remove my mysql installation and re-install from scratch. Now the
> problem. I have 6 active databases. How can i make sure that i dont loose
> those. And that when i have re-installed, that they work immediatilly ??
f
> Ok, either I'm getting senial, or it's too late at night. Had a gentleman
> ask me today to setup some stuff on his box and he said that it would be
> best if it was nameserved. What was he talking about? Was he saying I
> should install bind on it or that it just needs an entry in DN
Hi all,
I suspect a bad blok on the one and only drive in my gateway mail server
Fbsd 4.7.
I tried using that ftp blok by blok imaging util (from Germany name = ???)
but dumping it back it died trying to restore one of the slices. Damn!
What can I do here? sling another dive in it and tar up the sl
Hi,
Execute
mysqldump -u root -p --all-databases >>
WHOLE_DATABASE_DUMP.DMP
Once you reinstall mysql, delete all databases from mysql and then run
cat WHOLE_DATABASE_DUMP.DMP | mysql -u root -p
This is a tested method.
Regards
SSR
From: "Ian Barnes" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Ok, either I'm getting senial, or it's too late at night. Had a gentleman
ask me today to setup some stuff on his box and he said that it would be
best if it was nameserved. What was he talking about? Was he saying I
should install bind on it or that it just needs an entry in DNS or the
hos
On Thu, 29 May 2003, Tom Parquette wrote:
> I was installing an additional hard disk and I believe I commented out
> the wrong line in fstab or typo'ed something. The /usr filesystem is
> not mounted. The machine will not boot to a command prompt so I can
> repair it. It complains bitterly at b
This isn't so much a question as a curiosity I noticed tonight.
I have a dialup account with att.net & get a dynamic ip in the 12.93
block. While logging in tonight and initializing ipfilter, I noticed 7
blocked input packets right away. No big deal, but I checked my log.
Each packet was from
* Sheldon Hearn [05/15/2003 18:36]:
> I can't get mutt-1.5.4 to respond to the "End" key in an XFree86-4.3.0
> xterm on FreeBSD 5.1-BETA. It's been happening ever since I started
> with mutt a few months back, but it's only just pissed me off enough
> to ask for help.
I should also add... my afor
On Thu, 29 May 2003 01:35:37 -0700, Rich Morin <[EMAIL PROTECTED]> wrote:
Here's a bit more information on the configuration:
OS: FreeBSD 4.5
Disk: Seagate Barracuda ATA II (ST320420A; 20 GB)
Chips: 478 pin Celeron; 2.1 GHz
512 MB DDR DIMM (2 ea.)
SiS645DX Northbridge _or_ SiS962(L) Sou
At 08:04 AM 5/29/03, you wrote:
On Wed, May 28, 2003 at 05:51:33PM -0700, Joe Kelsey wrote:
: follow the suggestion and actually *use* the suggested refuse file you
: will then be unable to follow the other suggestion and ever use
: portupgrade, or else fix portupgrade so that it does not dump it g
* Sheldon Hearn [05/15/2003 18:36]:
> I can't get mutt-1.5.4 to respond to the "End" key in an XFree86-4.3.0
> xterm on FreeBSD 5.1-BETA. It's been happening ever since I started
> with mutt a few months back, but it's only just pissed me off enough
> to ask for help.
What has generally worked we
I was installing an additional hard disk and I believe I commented out
the wrong line in fstab or typo'ed something. The /usr filesystem is
not mounted. The machine will not boot to a command prompt so I can
repair it. It complains bitterly at boot time about not finding things
in the /usr/.
> > I am using Evolution as it is now, I have never tried any other
> > mailclients for X.
No matter what anyone says you're going to have to try them for yourself.
KMail, Sylpheed, Mozilla Mail, Mutt, etc.
All of these are VERY good now.
You won't know until you install, try it, and see how it
> > I want to remove my mysql installation and re-install from scratch. Now the
> > problem. I have 6 active databases. How can i make sure that i dont loose
> > those. And that when i have re-installed, that they work immediatilly ??
>
> I'd think mysql dump and restore would be the safest way an
-BEGIN PGP SIGNED MESSAGE-
Hi,
I am tring to run my kdm in securelevel=2, put it is not working,
when i try with /etc/ttys the x not open, when i try with rc.local, the X
open but the console is block.
I read about aperture in netbsd, is there a port to freebsd?
Thanks
__
> I have just re-installed apache, then mod_php4. I kept my old httpd.conf,
> put it back, fired up apache, checked the website, and it displays all the
> php code.
I guess that you need to tell somewhere that the .php .html files
should go throu PHP.
AddType application/x-httpd-php .php
At 2003-05-30T00:13:51Z, Eduardo Viruena Silva <[EMAIL PROTECTED]> writes:
> dont you have to restart sendmail?
>
> killall -HUP sendmail
...or:
cd /etc/mail; make restart
Remember, folks, /etc/mail/Makefile is your friend.
--
Kirk Strauser
pgp0.pgp
Description: PGP si
> I want to remove my mysql installation and re-install from scratch. Now the
> problem. I have 6 active databases. How can i make sure that i dont loose
> those. And that when i have re-installed, that they work immediatilly ??
I'd think mysql dump and restore would be the safest way and would
al
On Thu, 29 May 2003 10:36:34 +0200
Joachim Dagerot <[EMAIL PROTECTED]> wrote:
> I am using Evolution as it is now, I have never tried any other
> mailclients for X.
>
> I do miss an oportunity to choose sender each time I post a message,
> only way to solve that is to set up multiple accounts, an
May 28 10:20:21 tern /kernel: fd0c: hard error reading fsbn 0 (ST0
40 ST1 1 ST2 0 cyl 0 hd 0 sec 1)
May 28 10:20:24 tern /kernel: fd0c: hard error reading fsbn 0 (ST0
40 ST1 1 ST2 0 cyl 0 hd 0 sec 1)
May 28 10:22:46 tern /kernel: fd0c: hard error writing fsbn 0 of 0-1 (ST0
40 ST1 1 ST2 0 cyl 0 hd 0
On Thu, 29 May 2003, Cliff wrote:
> Trying to configure xfree86 with an ati all in wonder 32mb radion card
> and its not finding the correct driver chipset for it...any ideas?
mine works fine.
what version of FreeBSD are you using ?
what version of XFree86 are you using?
> __
On Thu, 29 May 2003, Warren Block wrote:
> On Thu, 29 May 2003, Peter Elsner wrote:
>
> > Try using the /etc/mail/access file, if you know what IP or domain it is
> > coming from...
> >
> > IPADDRESS/DOMAIN550 "RELAYING DENIED"
>
> Best to use a message that is more explanatory. I
Len Conrad wrote:
[ ... ]
They are bounce msgs from mailer-daemon, the mailer-daemon and no
spammer every read the reject text. better to make the msg say
something useful to your log file reporter than to any human.
It's better to make the message be human readable, regardless of whether the
p
On 29 May 2003 15:49:00 -0400
Adam <[EMAIL PROTECTED]> wrote:
> Well, I'm just about done rebuilding my box after a major crash and
> burn. Now that things are slowing down, I'd like to get some input on
> what might have caused the crash. I'm wondering if I stumbled on some
> obscure bug, or mayb
Trying to configure xfree86 with an ati all in wonder 32mb radion card and its not
finding the correct driver chipset for it...any ideas?
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send
Ideas ?
[]'s
May 29 21:12:33 sarpa ppp[169]: Phase: Using interface: tun0
May 29 21:12:33 sarpa ppp[169]: Phase: deflink: Created in closed state
May 29 21:12:33 sarpa ppp[169]: tun0: Command: default: ident user-ppp
VERSION (built COMPILATIONDATE)
May 29 21:12:33 sarpa ppp[169]: tun0: Command: de
> Try using the /etc/mail/access file, if you know what IP or domain it is
> coming from...
>
> IPADDRESS/DOMAIN550 "RELAYING DENIED"
Best to use a message that is more explanatory.
They are bounce msgs from mailer-daemon, the mailer-daemon and no spammer
every read the reject tex
On Thu, 29 May 2003, Peter Elsner wrote:
> Try using the /etc/mail/access file, if you know what IP or domain it is
> coming from...
>
> IPADDRESS/DOMAIN550 "RELAYING DENIED"
Best to use a message that is more explanatory. In this instance,
they're not trying to relay. Kirk alre
Antoine, David,
Thanks to you both for taking the time to respond. I just booted up again
and
the following messages appeared after those mentioned below:
:psmintr: reset the mouse
psm0: the aux port is not functioning (255)
the aux device has gone: (reinitialize)
Think I'd better f
On Thu, May 29, 2003 at 07:01:21PM +0200 or thereabouts, Gabriel Ambuehl seemed to
write:
> Hi,
> ok maybe I'm offtopic here, if so please excuse me ;-).
>
> I need to implement a coprocess feature (a.stdin gets fed to b.stdin
> and b.stdout becomes a.stdin, so basically replacing stdin with
> a
How about including
AddType application/x-httpd-php .php
AddType application/x-httpd-php-source .phps
outside of the following?:
AddType application/x-httpd-php .php
AddType application/x-httpd-php-source .phps
- Original Message -
From: "Ian Barnes" <[EMAIL PROTECTED]>
To: <[EMAIL
On Thu, May 29, 2003 at 03:41:59PM +0530 or thereabouts, Anurag Chaudhary seemed to
write:
> someone please tell me how to make a kld sleep for specified number of
> microseconds
>
> its urgent.
nanosleep (microseconds*1000);
-- Josh
>
> Thanx
> Anurag
>
> __
On Thu, 2003-05-29 at 17:08, Raphaël Marmier wrote:
> You might want to take a look at http://www.memtest86.com/ for a tool
> to test RAM.
I actually just got done running that. It didn't turn up any errors.
Also, I thought I'd mention that my two NIC's are Linksys (dc0) and 3com
(xl0). The Link
On Thu, May 29, 2003 at 10:36:34AM +0200 or thereabouts, Joachim Dagerot seemed to
write:
> I am using Evolution as it is now, I have never tried any other
> mailclients for X.
>
> I do miss an oportunity to choose sender each time I post a message,
> only way to solve that is to set up multiple
Hi,
I have just re-installed apache, then mod_php4. I kept my old httpd.conf,
put it back, fired up apache, checked the website, and it displays all the
php code.
Any ideas as to what can be wrong.
Attached please find my httpd.conf
Thanks alot.
Ian
httpd.conf
Description: Binary data
_
I have tried a couple of PCI-based IDE cards. I see messages that
indicate that the motherboard is seeing the card and that the card
is seeing the disk. Unfortunately, the system is not willing to
boot off the disk (sigh). I have tried changing several settings,
including:
* Setting {Pri,Sec}
On Wed, 28 May 2003, stan wrote:
> I've got a STABLE machine that I need to determine the amount of physical
> ram on. Unfortunately the boot time mesage are long gone out of the dmesg
> biffer.
>
> Can anyone think of a way to do this, short of rebooting the machine?
sysctl hw.physmem
--
:{ [
On Thu, May 29, 2003 at 12:53:17PM +, DanB wrote:
> I have a box running Gated now can you upgrade to version 5 Kernel with
> the old gated?
It should work..don't forget to install the 4.x compatibility
libraries and use the kernel compile option.
Kris
pgp0.pgp
Description: PGP signatur
[EMAIL PROTECTED] wrote:
downloaded i386 iso img from ftp.freebsd.org burnt the iso to cd the cd
wont boot, you or me ha ha
Most likely you or your machine. Can it boot other bootable CD's? Have you
tried booting from the two floppy disks?
-Chuck
__
You might want to take a look at http://www.memtest86.com/ for a tool
to test RAM.
Raphael
Le Jeudi, 29 mai 2003, à 21:49 Europe/Zurich, Adam a écrit :
Well, I'm just about done rebuilding my box after a major crash and
burn. Now that things are slowing down, I'd like to get some input on
what
On Thu, May 29, 2003 at 04:54:00PM -0400, Tom Limoncelli wrote:
> I have a NFS server with (so far) a single NFS client. Things work
> fine, however if (on the client) I do an "rm -rf foo" on a large (deep
> and wide) directory tree the tty receives "NFS server not
> responding"/"NFS server ok"
downloaded i386 iso img from ftp.freebsd.org burnt the iso to cd the cd
wont boot,
you or me ha ha
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTE
I have a NFS server with (so far) a single NFS client. Things work
fine, however if (on the client) I do an "rm -rf foo" on a large (deep
and wide) directory tree the tty receives "NFS server not
responding"/"NFS server ok" messages.
I don't think the network is at fault, nor is the server rea
Well, I'm just about done rebuilding my box after a major crash and
burn. Now that things are slowing down, I'd like to get some input on
what might have caused the crash. I'm wondering if I stumbled on some
obscure bug, or maybe a known bug that hasn't ever been fixed. Let me
describe the scenario
On Mon, 26 May 2003, Christoffer Pio wrote:
> x345 2U machine; the x345 comes with two on-board INTEL 100/1000 mb nics
> which uses the em driver. However, whenever I "up" one of the nics,
> there is a slight delay of a few seconds before the command
> completes, also the nic is not operating in
Hi all,
Anyone has been able to install Freebsd 4.7 on this machine ? i'm having
troubles with the NCR driver , freebsd doesnt found my embedded scsi card.
Anyone can give any clue?!?!
Thanks in advance!
___
[EMAIL PROTECTED] mailing list
http://lists.
Hello Everyone,
When I try to chpass my username, and go to save it, it says
pwd_mkdb: /etc/pw.OqOMoL: Inappropriate file type or format
My default editor is nano, did I do something wrong?
Please reply to my e-mail addresses, because for some reason, my mail
server blocks lists from receiving.
From: "BSD baby" <[EMAIL PROTECTED]>
To: "Ian Barnes" <[EMAIL PROTECTED]>
Cc: <[EMAIL PROTECTED]>
Sent: Thursday, May 29, 2003 11:16 AM
Subject: Re: Mysql
> > I want to remove my mysql installation and re-install from
scratch. Now the
> > problem. I have 6 active databases. How can i make sure th
"Lee Harr" <[EMAIL PROTECTED]> writes:
> Is this a hardware problem? I get the same thing with all disks I
> have tried.
Yes, probably.
I'm guessing it's an MS-DOS type floppy, being mounted with "mount -t msdos".
You might try the mtools, which parse the filesystem a little
differently, bu
Hi all,
Anyone has been able to install Freebsd 4.7 on this machine ? i'm having
troubles with the NCR driver , freebsd doesnt found my embedded scsi card.
Anyone can give any clue?!?!
Thanks in advance!
___
[EMAIL PROTECTED] mailing list
http://lists.
"Anurag Chaudhary" <[EMAIL PROTECTED]> writes:
> How can I read-write on parallel port from a kld
> also I need to know how can sleep be performed for a specified time in kld
Most likely, you're doing something that would be better kept mostly
in user space, but you might want to look at nlpt(4)
1 - 100 of 122 matches
Mail list logo
