Run away CPU FreeBSD 4.9 Release #0
Greetings, I have just installed 4.9 R0 on to new hardware and have encountered an unusual issue. It was not detected straight away as everything appeared to do what it was supposed to do... Some processes run away with the CPU. Screen is one of the worst offenders along with python.. The CPU starts out at about 15% and slowly ramps up to 100%. As the % ramps up, the priority increases up to about 60 If more than one screen is launched, then the will share the CPU but the priority still sits about 60. Any ideas what this could be and how to fix. Matt Villion ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: DNS resources or toaster
Marius Kirschner wrote: I have the task to set up a two DNS servers for my company, and while I have administered their DNS servers using BIND for a number of years I have never set them up from scratch. I have 2 boxes where FreeBSD 5.1 will be installed, and, to be honest, I'm not sure whether to use BIND or DJBDNS of which I've heard much good. Obviously either one will do the job.I guess it's just a matter of preferences..but I'm very tempted to go with DJBDNS this time. Anyway, anybody know of a good web page/site with some how-to for FreeBSD and DJBDNS? Thanks, http://www.lifewithdjbdns.com/ PWR. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Cannot find file system superblock error - how to recover?
On Tue, 6 Jan 2004 15:05, Sergey 'DoubleF' Zaharchenko wrote: On Tue, 6 Jan 2004 13:29:26 +1030 Malcolm Kay [EMAIL PROTECTED] probably wrote: On Tue, 6 Jan 2004 10:59, Scott I. Remick wrote: Sorry for the delay... holidays had me busy. Me too:) Hopefully you're still around and interested in picking up where we left off. I think we're definitely onto something... Looking back over some of your e-mails I find: QUOTE su-2.05b# disklabel -r /dev/ad6s1c # /dev/ad6s1c: 8 partitions: #size offsetfstype [fsize bsize bps/cpg] c: 156344517 63unused0 0 # raw part, don't edit e: 156344517 634.2BSD 2048 1638489 partition c: partition extends past end of unit disklabel: partition c doesn't start at 0! disklabel: An incorrect partition c may cause problems for standard system utilities partition e: partition extends past end of unit That doesn't look good. ENDQUOTE The 63 offset is spurious. I've seen this before somewhere but can't remember the details -- i.e the value 63. I know where you've seen this. The normal offset for the first *slice* is 63 sectors, for some historical reasons (those extra sectors were to be used for bad block replacement or something like that). Yes, I expect it in the output from fdisk. Ignoring for the moment that the BIOS ideas of geometry has nothing to do with the physical reality; all slices start at sector 1 of a track so having used sector 1 of the first track (cylinder 0 head 0) for the MBR, the first slice must start at cylinder 0 head 1 sector 1; usually an offset of 63 with the assumed virtual geometry. (Nothing to do with bad block replacement which on modern drives is almost completely hidden) But I have seen the 63 before in corrupted disklabels, not just slice positions. Not sure how the 63 made it into the disklabel, though. Neither do I. Malcolm Kay ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
re: anyone have this problem of hotmail?
how silly I am. Some one told me the famous fetchmail can do the work. _ MSN Hotmail http://www.hotmail.com ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
XFree86 Desktop installation
Hi, I already configured the XFree86 on my FreeBSD system and I want to run the KDE or Gnome desktop applications. How is this possible. I appreciate your help. Totally newbie here :) Thanks. Cheers, Mazen S. Alzogbi www.mazenalzogbi.com ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: XFree86 Desktop installation
On Tue, Jan 06, 2004 at 03:04:48AM -0800, [EMAIL PROTECTED] wrote: Hi, I already configured the XFree86 on my FreeBSD system and I want to run the KDE or Gnome desktop applications. How is this possible. I appreciate your help. Totally newbie here :) If you have the time, patience and disk space, you could: for gnome: # cd /usr/ports/x11/gnome2 # make install clean for kde: # cd /usr/ports/x11/kde3 # make install clean Or just install the packages (will fetch from the ftp servers) # pkg_add -r kde or # pkg_add -r gnome2 hth Gautam ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
changing configure options when using a port
Hi all, I'm slowly getting used to FreeBSD from a Linux background so forgive the ignorant questions. I'm curious what the best way to add configure options are when installing from a port. For example, i'd like to add --enable-rewrite to apache2. Can I just put it in the Makefile in /usr/ports/www/apache2 ? Is this generally the best way to do this? Thanks in advance, August ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Cannot find file system superblock error - how to recover?
On Tue, 6 Jan 2004 19:43:44 +1030 Malcolm Kay [EMAIL PROTECTED] probably wrote: On Tue, 6 Jan 2004 15:05, Sergey 'DoubleF' Zaharchenko wrote: On Tue, 6 Jan 2004 13:29:26 +1030 Malcolm Kay [EMAIL PROTECTED] probably wrote: On Tue, 6 Jan 2004 10:59, Scott I. Remick wrote: Sorry for the delay... holidays had me busy. Me too:) Hopefully you're still around and interested in picking up where we left off. I think we're definitely onto something... Looking back over some of your e-mails I find: QUOTE su-2.05b# disklabel -r /dev/ad6s1c # /dev/ad6s1c: 8 partitions: #size offsetfstype [fsize bsize bps/cpg] c: 156344517 63unused0 0 # raw part, don't edit e: 156344517 634.2BSD 2048 1638489 partition c: partition extends past end of unit disklabel: partition c doesn't start at 0! disklabel: An incorrect partition c may cause problems for standard system utilities partition e: partition extends past end of unit That doesn't look good. ENDQUOTE The 63 offset is spurious. I've seen this before somewhere but can't remember the details -- i.e the value 63. I know where you've seen this. The normal offset for the first *slice* is 63 sectors, for some historical reasons (those extra sectors were to be used for bad block replacement or something like that). Yes, I expect it in the output from fdisk. Ignoring for the moment that the BIOS ideas of geometry has nothing to do with the physical reality; all slices start at sector 1 of a track so having used sector 1 of the first track (cylinder 0 head 0) for the MBR, the first slice must start at cylinder 0 head 1 sector 1; usually an offset of 63 with the assumed virtual geometry. (Nothing to do with bad block replacement which on modern drives is almost completely hidden) Yes I know, I meant used to be used for:) But I have seen the 63 before in corrupted disklabels, not just slice positions. Maybe in dedicated disklabels? How did they get *that* corrupted? Not sure how the 63 made it into the disklabel, though. Neither do I. Malcolm Kay -- DoubleF You look like a million dollars. All green and wrinkled. pgp0.pgp Description: PGP signature
Re: Cannot find file system superblock error - how to recover?
On Tue, 6 Jan 2004 19:57:09 +1030 Malcolm Kay [EMAIL PROTECTED] probably wrote: On Tue, 6 Jan 2004 15:38, Scott I. Remick wrote: --- Sergey 'DoubleF' Zaharchenko [EMAIL PROTECTED] wrote: I wonder whether editing the label and setting both offsets to 0 might solve the problem. It definitely seems like that, as the actual offset of the partition is 0, as dd shows. Ok, sounds like a plan. Not that I know what I'm doing. Should I use something like the following command to save my current disklabel? bsdlabel /dev/ad6s1c disklabel.ad6s1c.backup Then do I just edit a copy of that textfile, change the offsets to 0, then write it back like this? bsdlabel -R /dev/ad6s1c dislabel.ad6s1c.new And maybe prefix that by a $ bsdlabel -R /dev/ad6s1c dislabel.ad6s1c.new which would just check your new layout for errors, without writing anything, and print your file out as disklabel understands it. And lastly... your talk about offsets. The man page for bsdlabel describes using it on the whole disk (ad6) and not a slice or partition. If I run it It can't be fdisk that you are reading about? on ad6, I get: bsdlabel: /dev/ad6: no valid label found Beware; if you write a disklabel (or presumably bsdlabel; I have no experience with 5.x) to ad6 you create a dangerously dedicated disk, i.e. a disk without slices. And of course the label isn't there, just because nobody wanted a `DD' disk. If I run it on the slice ad6s1 I get: # /dev/ad6s1: 8 partitions: #size offsetfstype [fsize bsize bps/cpg] c: 1563445170unused0 0 # raw part, don't edit e: 15634451704.2BSD 2048 1638489 And there I see the offset of 0 you might be talking about...? Are we looking at the proper label? Just want to make sure before I mess things up. Are you saying that the disklabels reported for ad6s1 and ad6s1c are different? And the `new' one seems to be correct for a 80G drive (+- a couple of megabytes)? Have you touched anything? Now, mount might work. Under FreeBSD 4.x ad6s1 and ad6s1c would normally be aliases referencing the entire slice. Maybe 5.x is different! I'm now very confused. Uhum. disklabel said that the offset was 63 in your previous posting, didn't it? What does # ls -l /dev/ad6s1 /dev/ad6s1c say? Any differences? I have none. What is reported by fdisk? Let me guess: a single large slice. Malcolm Kay Thanks! ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] -- DoubleF [Sir Stafford Cripps] has all the virtues I dislike and none of the vices I admire. -- Winston Churchill pgp0.pgp Description: PGP signature
Re: changing configure options when using a port
On Tue, Jan 06, 2004 at 10:33:49PM +1100, August Simonelli wrote: Hi all, I'm slowly getting used to FreeBSD from a Linux background so forgive the ignorant questions. I'm curious what the best way to add configure options are when installing from a port. For example, i'd like to add --enable-rewrite to apache2. Can I just put it in the Makefile in /usr/ports/www/apache2 ? Is this generally the best way to do this? If you look at the Makefile in /usr/ports/www/apache2, you would notice a variable called WITH_MODULES. You would need to see what modules you want and run make like: make WITH_MODULES=include rewrite auth install clean or whatever you want. There are examples given in the makefile. You could change the makefile, but it will be overwriten next time you upgrade the ports collection. hth Gautam ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: XFree86 Desktop installation
[EMAIL PROTECTED] wrote: On Tue, Jan 06, 2004 at 03:04:48AM -0800, [EMAIL PROTECTED] wrote: Hi, I already configured the XFree86 on my FreeBSD system and I want to run the KDE or Gnome desktop applications. How is this possible. I appreciate your help. Totally newbie here :) If you have the time, patience and disk space, you could: for gnome: # cd /usr/ports/x11/gnome2 # make install clean for kde: # cd /usr/ports/x11/kde3 # make install clean Or just install the packages (will fetch from the ftp servers) # pkg_add -r kde or # pkg_add -r gnome2 And then, after they're installed put the following in ~/.xinitrc: exec start-kde, if you want KDE or exec gnome-session, if you want Gnome. -- Cheers, Bernard ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
[tompos@martos.bme.hu: jail on nullfs and 5.1-RELEASE]
Nobody answered on the freebsd-fs list. May be (I hope;)) here. Please, help me. thanx, tompos - Forwarded message from Papp Tamas [EMAIL PROTECTED] - Date: Mon, 29 Dec 2003 17:11:38 +0100 From: Papp Tamas [EMAIL PROTECTED] To: [EMAIL PROTECTED] Subject: jail on nullfs and 5.1-RELEASE hi! I created a full jail with nullfs. Everything is mounted read-only with nullfs except /var, /dev, /tmp and /home . It would be an shell server. When I did a find inside the jail in the directory /usr/sbin, it was lockd up. The process can't see in the ps list from outside the jail. When I try to connect to the jail's ssh daemon, it doesn't work, but with jexec I can do anything, for example ps, or ls, but if I want to list the files in the jail's /, /usr or /usr/sbin directory (common mount), it locks up, and the ps show the process in the D+ state. root10034 0.0 0.0 1136 476 p1 D+4:48PM 0:00.00 jexec 8 /bin/ls / Anyway the cron processess in the jail are too in D state: root 9993 0.0 0.0 1304 440 ?? DLJ 4:45PM 0:00.00 /usr/sbin/cron Can somebody to help me, or say any positive future releated to the problem? I'm very sad, because I would like to do this very much and I can't :) I'm sorry if the mail is a bit chaotic, but I can't see, where or what is the problem (nullfs? jail? or something else? or me?:))) and my english is very rude. I apologize. Thank you very much, tompos ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-fs To unsubscribe, send any mail to [EMAIL PROTECTED] - End forwarded message - ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: changing configure options when using a port
Ok that makes sense. So something like make --enable-rewrite make install clean would do the trick? As well as make WITH_MODULES=include rewrite auth install clean as suggested by Gautam Gopalakrishnan? august On 06/01/2004, at 11:13 PM, Subhro wrote: Hi August, System wide make options are added to the /etc/make.conf. However for specific ports I prefer to put the required options on the command line while compiling. Regards Subhro Subhro Sankha Kar Indian Institute of Information Technology Block AQ-13/1, Sector V Salt Lake City PIN 700091 India -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of August Simonelli Sent: Tuesday, January 06, 2004 5:04 PM To: FreeBSD-questions Subject: changing configure options when using a port Hi all, I'm slowly getting used to FreeBSD from a Linux background so forgive the ignorant questions. I'm curious what the best way to add configure options are when installing from a port. For example, i'd like to add --enable-rewrite to apache2. Can I just put it in the Makefile in /usr/ports/www/apache2 ? Is this generally the best way to do this? Thanks in advance, August ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: libxmms.so troubles with building mplayer.
On Mon, Jan 05, 2004 at 06:08:17PM -0800, Gary Kline wrote: For reasons I haven't sorted out, player is looking for /usr/local/lib/libxmms.so, while the library xmms.so[.4] is in the X11R6 tree. So mplayer quits. When I turn off WITH_XMMS, mplayer dies elsewhere. Hmmm... It works fine for me, and finds the right libxmms.so: % ldd /usr/local/bin/mplayer | grep -i xmms libxmms.so.4 = /usr/X11R6/lib/libxmms.so.4 (0x2847e000) I think that mplayer should be able to find libxmms.so in /usr/X11R6/lib without having to use any special linker flags. The fact that it can't suggests that either when you're compiling mplayer you are somehow overriding the linker flags in a counter-productive way, or that the ld-elf.so dynamic loader configuration is screwed up. Do you have anything in your environment that could affect either the compilation stage -- eg. LDFLAGS, CFLAGS, CC or any environment variables that could affect the dynamic loader -- eg LD_LIBRARY_PATH, LD_PRELOAD (see rtld(1) for more)? Have you installed the libmap.conf patch from http://people.FreeBSD.org/~nork/libmap_4stable.diff , as the www/linuxpluginwrapper port needs you to do under 4.x? If so, what's the contents of your /etc/libmap.conf? What do you get from running 'ldconfig -r' -- particularly the second line or so where it shows what directories it will search for shared libraries? Should be something like: % ldconfig -r | head -2 /var/run/ld-elf.so.hints: search directories: /usr/lib:/usr/lib/compat:/usr/X11R6/lib:/usr/local/lib:/usr/local/lib/mysql:/usr/local/lib/compat/pkg:/usr/local/lib/pth:/usr/local/lib/mplayer/vidix and it should have a line for libxmms something like this: 160:-lxmms.4 = /usr/X11R6/lib/libxmms.so.4 (The number 160 will be different on your system: it just means that information about libxmms.so.4 is stored in element 160 of an array internal to ld-elf.so) Cheers, Matthew -- Dr Matthew J Seaman MA, D.Phil. 26 The Paddocks Savill Way PGP: http://www.infracaninophile.co.uk/pgpkey Marlow Tel: +44 1628 476614 Bucks., SL7 1TH UK pgp0.pgp Description: PGP signature
Re: changing configure options when using a port
On Tue, Jan 06, 2004 at 10:33:49PM +1100, August Simonelli wrote: I'm slowly getting used to FreeBSD from a Linux background so forgive the ignorant questions. I'm curious what the best way to add configure options are when installing from a port. For example, i'd like to add --enable-rewrite to apache2. Can I just put it in the Makefile in /usr/ports/www/apache2 ? Is this generally the best way to do this? The apache2 port Makefile already comes with any number of hooks for enabling or disabling various configuration options -- probably too many in fact. In your case, to enable mod_rewrite you don't need to do anything, as it's already a standard part of the apache2 port, and enabled by default in the sample httpd-std.conf file. To get a list of what modules are available and what would be included when you build the port, use: # cd /usr/ports/www/apache2 # make show-modules However, for the sake of completelness, you can compile the port to include extra modules by: # make WITH_EXTRA_MODULES=rewrite or to statically link mod_rewrite into the apache binary: # make WITH_STATIC_MODULES=rewrite To apply these options without having to remember to type them in on the command line all the time, you can create a 'Makefile.inc' in the port directory which just contains the 'WITH_FOO=bar' variable assignments, or you can use portupgrade(1) and record these customizations in it's pkgtools.conf configuration file. Cheers, Matthew -- Dr Matthew J Seaman MA, D.Phil. 26 The Paddocks Savill Way PGP: http://www.infracaninophile.co.uk/pgpkey Marlow Tel: +44 1628 476614 Bucks., SL7 1TH UK pgp0.pgp Description: PGP signature
Re: [tompos@martos.bme.hu: jail on nullfs and 5.1-RELEASE]
On Tue, Jan 06, 2004 at 05:49:37PM +0530, Subhro wrote: Hi Tompos, RTFM? Refer to the jail manual pages. It will tell you how to run services within a jail. Running services within a jail is *not* like running services on a bare system. Also find locked up as expected. For executing the find ssh to the jail and check from inside. And regarding the process, it is very much normal that you can't see the process. You will just see the main jail process from ps -aux. It will be running with a j flag indicating it's a jail process. If you wnt to find the process for something (say gruff) running inside a jail, then get into the jail and type ps -aux. Hi Subhro, I did run the find within the jail and it locked up. Why is it normal, that I can't see the process? Yes, I now, it has J flag, but I should see it outside the jail, souldn't I? Do I misunderstand something? thanx, tompos ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: error in port
This worked!! I could get it to install with the package and I also managed to install Gnucash successfully which was dependent of ghostscript. Thanks --- W. Ryan Merrick [EMAIL PROTECTED] wrote: Dino Vliet wrote: I tried to do it once again and I'm getting the following error: ** gmake[3]: Leaving directory `/usr/ports/print/ghostscript-gnu/work/ghostscript-7.07/gimp-print-4.2.1/src' gmake[2]: Leaving directory `/usr/ports/print/ghostscript-gnu/work/ghostscript-7.07/gimp-print-4.2.1/src' Making all in samples gmake[2]: Entering directory `/usr/ports/print/ghostscript-gnu/work/ghostscript-7.07/gimp-print-4.2.1/samples' gmake[2]: Nothing to be done for `all'. gmake[2]: Leaving directory `/usr/ports/print/ghostscript-gnu/work/ghostscript-7.07/gimp-print-4.2.1/samples' Making all in test gmake[2]: Entering directory `/usr/ports/print/ghostscript-gnu/work/ghostscript-7.07/gimp-print-4.2.1/test' gmake[2]: Nothing to be done for `all'. gmake[2]: Leaving directory `/usr/ports/print/ghostscript-gnu/work/ghostscript-7.07/gimp-print-4.2.1/test' Making all in po gmake[2]: Entering directory `/usr/ports/print/ghostscript-gnu/work/ghostscript-7.07/gimp-print-4.2.1/po' gmake[2]: Nothing to be done for `all'. gmake[2]: Leaving directory `/usr/ports/print/ghostscript-gnu/work/ghostscript-7.07/gimp-print-4.2.1/po' Making all in doc gmake[2]: Entering directory `/usr/ports/print/ghostscript-gnu/work/ghostscript-7.07/gimp-print-4.2.1/doc' Making all in users_guide gmake[3]: Entering directory `/usr/ports/print/ghostscript-gnu/work/ghostscript-7.07/gimp-print-4.2.1/doc/users_guide' gmake[3]: Nothing to be done for `all'. gmake[3]: Leaving directory `/usr/ports/print/ghostscript-gnu/work/ghostscript-7.07/gimp-print-4.2.1/doc/users_guide' gmake[3]: Entering directory `/usr/ports/print/ghostscript-gnu/work/ghostscript-7.07/gimp-print-4.2.1/doc' gmake[3]: Nothing to be done for `all-am'. gmake[3]: Leaving directory `/usr/ports/print/ghostscript-gnu/work/ghostscript-7.07/gimp-print-4.2.1/doc' gmake[2]: Leaving directory `/usr/ports/print/ghostscript-gnu/work/ghostscript-7.07/gimp-print-4.2.1/doc' gmake[2]: Entering directory `/usr/ports/print/ghostscript-gnu/work/ghostscript-7.07/gimp-print-4.2.1' gmake[2]: Nothing to be done for `all-am'. gmake[2]: Leaving directory `/usr/ports/print/ghostscript-gnu/work/ghostscript-7.07/gimp-print-4.2.1' gmake[1]: Leaving directory `/usr/ports/print/ghostscript-gnu/work/ghostscript-7.07/gimp-print-4.2.1' creating symlinks for gimp-print ... creating symlinks for md2k ... creating symlinks for alps ... creating symlinks for bj10v ... creating symlinks for bjc250 ... creating symlinks for lips ... building epag utility ... gmake: `ert' is up to date. creating symlinks for epag ... creating symlinks for eplaser ... creating symlinks for mjc ... creating symlinks for lxm3200 ... creating symlinks for lex7000 ... cc `cat ./obj/cc.tr` -DHAVE_MKSTEMP -O -pipe -Wall -Wstrict-prototypes -Wmissing-declarations -Wmissing-prototypes -Wtraditional -fno-builtin -fno-common -DUPD_SIGNAL=0 -I./gimp-print -I/usr/local/include -I./obj -I./src -o ./obj/gdevl256.o -c ./src/gdevl256.c *** Error code 2 Stop in /usr/ports/print/ghostscript-gnu. *** I'm not doing anayting fancy. Just cd to the /usr/ports/print/ghostscript-gnu directory and issue a make install clean. I haven't configured x yet. I'm not giving any options. So what's the big problem? --- Lowell Gilbert [EMAIL PROTECTED] wrote: Dino Vliet [EMAIL PROTECTED] writes: I'm getting an error when doing a make install clean in the gnucash 1.8.5 port under freebsd 4.9. The make prcess stops with the following command: .. ./src/gdevl256.c:307: warning: implicit declaration of function 'gl_line' gmake: ** [obj/gdvel256.o] Error 1 *** Error code 2 Stop in /usr/ports/print/ghostscript-gnu *** Error code 1 Stop in /usr/ports/print/gnomeprint *** Error code 1 Stop in /usr/ports/math/guppi *** Error code 1 Stop in /usr/ports/finance/gnucash +++ What went wrong? What can I do about it? How can I remove the files that were already installed? How do I know which files where already installed? What failed was building ghostscript-gnu, one of the other ports on which gnucash depends. The gnucash port itself did not install anything; the ports system is careful about not installing a port unless that port built properly. So the only thing you need to worry about is why ghostscript didn't build for you. It's building properly for me; did you set any options, or change the driver configuration? [The file that's failing to build for you doesn't exist in my build directory.] -- Lowell Gilbert,
Re: changing configure options when using a port
On 06/01/2004, at 11:52 PM, Matthew Seaman wrote: On Tue, Jan 06, 2004 at 10:33:49PM +1100, August Simonelli wrote: I'm slowly getting used to FreeBSD from a Linux background so forgive the ignorant questions. I'm curious what the best way to add configure options are when installing from a port. For example, i'd like to add --enable-rewrite to apache2. Can I just put it in the Makefile in /usr/ports/www/apache2 ? Is this generally the best way to do this? The apache2 port Makefile already comes with any number of hooks for enabling or disabling various configuration options -- probably too many in fact. In your case, to enable mod_rewrite you don't need to do anything, as it's already a standard part of the apache2 port, and enabled by default in the sample httpd-std.conf file. To get a list of what modules are available and what would be included when you build the port, use: # cd /usr/ports/www/apache2 # make show-modules However, for the sake of completelness, you can compile the port to include extra modules by: # make WITH_EXTRA_MODULES=rewrite or to statically link mod_rewrite into the apache binary: # make WITH_STATIC_MODULES=rewrite To apply these options without having to remember to type them in on the command line all the time, you can create a 'Makefile.inc' in the port directory which just contains the 'WITH_FOO=bar' variable assignments, or you can use portupgrade(1) and record these customizations in it's pkgtools.conf configuration file. Ok, I get it. And by having --enable-so in the apache port's Makefile and using the LoadModule directive in httpd.conf i can see how many modules are actually available from the port bt default. wow. httpd.conf has a lot of stuff enabled ... sounds like i've got the info i need here to understand adding additional configure options to the building of a port. now it sounds like i'd better do some reading on apache! thanks everyone! august ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
p5-DBD-Oracle-1.14 with 9i
Hi, Should this driver also work for Oracle 9i? I get the following error at connection, though I don't think there is a real memory problem: DBI connect('MYBASE','mylogin',...) failed: at ./connect.pl line 4 ORA-01019: unable to allocate memory in the user side (DBD: login failed, probably a symptom of a deeper problem) at ./connect.pl line 4. I'm running freebsd 5.1 SMP enabled, Oracle 9i, oracle7-client-0.02, p5-DBI-137-1.37 and p5-DBD-Oracle-1.14, all on the same box. TIA ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: p5-DBD-Oracle-1.14 with 9i
On Tue, 6 Jan 2004, Vitalis wrote: Should this driver also work for Oracle 9i? I get the following error at connection, though I don't think there is a real memory problem: DBI connect('MYBASE','mylogin',...) failed: at ./connect.pl line 4 ORA-01019: unable to allocate memory in the user side (DBD: login failed, probably a symptom of a deeper problem) at ./connect.pl line 4. I'm running freebsd 5.1 SMP enabled, Oracle 9i, oracle7-client-0.02, p5-DBI-137-1.37 and p5-DBD-Oracle-1.14, all on the same box. Unfortunately, you can't connect to Oracle 9i with an Oracle 7 client. :-/ regards, le -- Lukas Ertl eMail: [EMAIL PROTECTED] UNIX Systemadministrator Tel.: (+43 1) 4277-14073 Vienna University Computer Center Fax.: (+43 1) 4277-9140 University of Vienna http://mailbox.univie.ac.at/~le/ ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: XFree86 Desktop installation
Gautam and Bernard, Thank you for your instant help. I will try that as soon :) Cheers, Mazen On Tue, Jan 06, 2004 at 03:04:48AM -0800, [EMAIL PROTECTED] wrote: Hi, I already configured the XFree86 on my FreeBSD system and I want to run the KDE or Gnome desktop applications. How is this possible. I appreciate your help. Totally newbie here :) If you have the time, patience and disk space, you could: for gnome: # cd /usr/ports/x11/gnome2 # make install clean for kde: # cd /usr/ports/x11/kde3 # make install clean Or just install the packages (will fetch from the ftp servers) # pkg_add -r kde or # pkg_add -r gnome2 And then, after they're installed put the following in ~/.xinitrc: exec start-kde, if you want KDE or exec gnome-session, if you want Gnome. -- Cheers, Bernard ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: jdk14+tomcat5 crashing box
On (2003/12/31 04:55), Brett Gulla wrote: Thanks for the input, but the problem seems to have been fixed. Here's what I did: 1. cvsup'd to 5.2 RC 2. upgraded to tomcat 5.0.16 PS. Using native threads (-lc_r not -pthread) I believe that the problem was fixed in FreeBSD itself, because an upgrade from a pre-5.2-RC1 to 5.2-CURRENT fixed exactly this problem for me. I didn't need to upgrade Tomcat. Ciao, Sheldon. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Cannot find file system superblock error - how to recover?
--- Malcolm Kay [EMAIL PROTECTED] wrote: Beware; if you write a disklabel (or presumably bsdlabel; I have no experience with 5.x) to ad6 you create a dangerously dedicated disk, i.e. a disk without slices. Ok. I am not saying that's what I want to do, I only mentioned it because the man page for disklabel/bsdlabel uses the entire disk (/dev/da0) as an example. man disklabel brings up bsdlabel, which is why I mention bsdlabel instead. http://www.freebsd.org/cgi/man.cgi?query=bsdlabel Are you saying that the disklabels reported for ad6s1 and ad6s1c are different? This is correct. Your surprise suggests that it was good I mentioned that, eh? :) Glad I haven't done anything yet. In summary, ad6s1 returns an offset of 0 and no error. ad6s1c returns an offset of 63 and the rest of the info is identical except for the following error tagged on at the end: partition c: partition extends past end of unit bsdlabel: partition c doesn't start at 0! bsdlabel: An incorrect partition c may cause problems for standard system utilities partition e: partition extends past end of unit Under FreeBSD 4.x ad6s1 and ad6s1c would normally be aliases referencing the entire slice. Maybe 5.x is different! I'm now very confused. I'm not sure... maybe Sergey wants to pipe in here on this point? What is reported by fdisk? Ah, I'm at work now. Can't do that from here... I'll let you know later. Thanks! ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: How do I read digital camera on USB port with hppsmtools?
Thanks for your reply. I plug the camera into the USB port, turn on the camera, it beeps and says it is connected to a computer. At this stage I think you could mount the camera with the /dev/da0s1 device with msdosfs. Works for me with 5.1 I added this to my /etc/fstab: /dev/da0s1 /camera msdos r,notauto,longnames 0 0 created a /camera directory and did MAKEDEV da0s1 but when I try to mount /camera: # mount /camera fstab: /etc/fstab:9: Inappropriate file type or format fstab: /etc/fstab:9: Inappropriate file type or format mount: /camera: unknown special file or file system when I try putting this line in /etc/fstab: /dev/usb0 /usb msdos rw,noauto,longnames 0 0 and # mount /usb I get: fstab: /etc/fstab:9: Inappropriate file type or format msdos: /dev/usb0: Block device required Do I need to do something like /dev/usb0/da0s1 The handbook goes into great detail about the architecture and says that USB was supported early on and that the device is smart enough to work on a plug and play basis no matter what you plug into it. I can't mount the device, much less use a peripheral plugged into it. regards, Ken ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Two unrelated questions
Hi List, 1) Does the 5.x branch of freebsd support 32 bit cardbus? or will it be added to 4.x soon? 2) I have installed freebsd 4.9 on my Dell Inspiron 8100 laptop, when I try to configure XFree86 I have to use the text based tool. After doing that, when I run startx I get a grainy desktop that almost covers my screen, but not quite, and has only a clock window, a login window, and an xterm window, and nothing else. Where am I going wrong? Happy New Year Scott ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Two unrelated questions
2) I have installed freebsd 4.9 on my Dell Inspiron 8100 laptop, when I try to configure XFree86 I have to use the text based tool. After doing that, when I run startx I get a grainy desktop that almost covers my screen, but not quite, and has only a clock window, a login window, and an xterm window, and nothing else. Where am I going wrong? You didn't install some of the window managers. Log as root and # cd /stand # ./sysinstall Choose Post-Configure XFree86 or something and install KDE, Gnome or something similar. # rehash # startx It should work... ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Cannot find file system superblock error - how to recover?
--- Sergey 'DoubleF' Zaharchenko [EMAIL PROTECTED] wrote: And maybe prefix that by a $ bsdlabel -R /dev/ad6s1c dislabel.ad6s1c.new which would just check your new layout for errors, without writing anything, and print your file out as disklabel understands it. So you're saying, run it as user and not root for the sake of testing it in a read-only setting? Would that be better than using -n? From the man page: The -n stops the bsdlabel program right before the disk would have been modified, and displays the result instead of writing it. And lastly... your talk about offsets. The man page for bsdlabel describes using it on the whole disk (ad6) and not a slice or partition. If I run it It can't be fdisk that you are reading about? Nope. man bsdlabel mentions: disk represents the disk in question, and may be in the form da0 or /dev/da0. It will display the partition layout. But I see now all the later examples mention da0s1 so maybe I misunderstood. And the `new' one seems to be correct for a 80G drive (+- a couple of megabytes)? Have you touched anything? Now, mount might work. Haven't changed anything yet. Which one are you calling the new one? Mount would be done on the partion (ad6s1c) which gives errors with bsdlabel and has an offset of 63, not the whole slice (ad6s1) which has an offset of 0 and doesn't give errors (with bsdlabel). Uhum. disklabel said that the offset was 63 in your previous posting, didn't it? 63 for ad6s1c, 0 for ad6s1. This is what's got Malcolm confused. What does # ls -l /dev/ad6s1 /dev/ad6s1c say? Any differences? I have none. su-2.05b# ls -l /dev/ad6s1 /dev/ad6s1c crw-r- 1 root operator4, 20 Dec 29 08:11 /dev/ad6s1 crw-r- 1 root operator4, 21 Dec 29 08:11 /dev/ad6s1c And to recap: su-2.05b# bsdlabel /dev/ad6s1 # /dev/ad6s1: 8 partitions: #size offsetfstype [fsize bsize bps/cpg] c: 1563445170unused0 0 # raw part, don't edit e: 15634451704.2BSD 2048 1638489 su-2.05b# bsdlabel /dev/ad6s1c # /dev/ad6s1c: 8 partitions: #size offsetfstype [fsize bsize bps/cpg] c: 156344517 63unused0 0 # raw part, don't edit e: 156344517 634.2BSD 2048 1638489 partition c: partition extends past end of unit bsdlabel: partition c doesn't start at 0! bsdlabel: An incorrect partition c may cause problems for standard system utilities partition e: partition extends past end of unit ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Poor SCSI disk preformance
Hi Everyone, I'm having difficulty getting my SCSI hard disks to preform well. I don't know what tools are available to help me diagnose this issue, or if there are specific tweaks that I need to make. Attached is the output from dmesg. The reason why I say that performance is slow is that when I run the following: # dd if=/dev/zero of=/dev/da0 count=200 bs=128k 200+0 records in 200+0 records out 26214400 bytes transferred in 5.100589 secs (5139485 bytes/sec) You can see that it doesn't transfer very fast. If I do the whole drive, I still get the same throughput. It strikes me as odd that an older ATA disk preforms better than the newer SCSI disk. I am under the impression that a standard run-of-the mill ATA drive will do anywhere from 10-15 MB/s sequential transfer, which is what I get when writing to an actual filesystem (with no soft-updates): # mount /dev/ad0s1a on / (ufs, local) /dev/ad0s1f on /tmp (ufs, local, soft-updates) /dev/ad0s1g on /usr (ufs, local, soft-updates) /dev/ad0s1e on /var (ufs, local, soft-updates) procfs on /proc (procfs, local) # dd if=/dev/zero of=/temp.234233 count=200 bs=128k 200+0 records in 200+0 records out 26214400 bytes transferred in 2.437368 secs (10755208 bytes/sec) And with soft-updates: # dd if=/dev/zero of=/usr/temp.234233 count=200 bs=128k 200+0 records in 200+0 records out 26214400 bytes transferred in 2.759680 secs (9499072 bytes/sec) I also had (meaning it is not currently attached) a different SCSI drive attached on the bus, with the same results. Has anyone any tips for this from a FreeBSD point of view? TIA, Derek Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.8-RELEASE #0: Thu Apr 3 10:53:38 GMT 2003 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/GENERIC Timecounter i8254 frequency 1193182 Hz CPU: Pentium II/Pentium II Xeon/Celeron (298.54-MHz 686-class CPU) Origin = GenuineIntel Id = 0x660 Stepping = 0 Features=0x183f9ffFPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR real memory = 134217728 (131072K bytes) avail memory = 125378560 (122440K bytes) Preloaded elf kernel kernel at 0xc051d000. Pentium Pro MTRR support enabled md0: Malloc disk Using $PIR table, 9 entries at 0xc00ede10 npx0: math processor on motherboard npx0: INT 16 interface pcib0: Intel 82443BX (440 BX) host to PCI bridge on motherboard pci0: PCI bus on pcib0 agp0: Intel 82443BX (440 BX) host to PCI bridge mem 0x4400-0x47ff at device 0.0 on pci0 pcib1: Intel 82443BX (440 BX) PCI-PCI (AGP) bridge at device 1.0 on pci0 pci1: PCI bus on pcib1 pci1: ATI Mach64-GD graphics accelerator at 0.0 irq 11 fxp0: Intel Pro 10/100B/100+ Ethernet port 0x2400-0x241f mem 0x4010-0x401f,0x4200-0x42000fff irq 11 at device 15.0 on pci0 fxp0: Ethernet address 00:08:c7:89:c4:28 inphy0: i82555 10/100 media interface on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto ahc0: Adaptec 2940 Ultra SCSI adapter port 0x2000-0x20ff mem 0x4020-0x40200fff irq 11 at device 16.0 on pci0 aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs isab0: Intel 82371AB PCI to ISA bridge at device 20.0 on pci0 isa0: ISA bus on isab0 atapci0: Intel PIIX4 ATA33 controller port 0x2440-0x244f at device 20.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 uhci0: Intel 82371AB/EB (PIIX4) USB controller port 0x2420-0x243f irq 11 at device 20.2 on pci0 usb0: Intel 82371AB/EB (PIIX4) USB controller on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered chip0: Intel 82371AB Power management controller port 0xfc00-0xfc0f at device 20.3 on pci0 orm0: Option ROMs at iomem 0xc-0xc7fff,0xc8000-0xc97ff,0xc9800-0xd07ff,0xe-0xe7fff on isa0 fdc0: NEC 72065B or clone at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: 1440-KB 3.5 drive on fdc0 drive 0 atkbdc0: Keyboard controller (i8042) at port 0x60,0x64 on isa0 atkbd0: AT Keyboard flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: PS/2 Mouse irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0 vga0: Generic ISA VGA at port 0x3c0-0x3df iomem 0xa-0xb on isa0 sc0: System console at flags 0x100 on isa0 sc0: VGA 16 virtual consoles, flags=0x300 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A ppc0: Parallel port at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold plip0: PLIP network interface on ppbus0 lpt0: Printer on ppbus0 lpt0: Interrupt-driven port ppi0: Parallel I/O on ppbus0 ad0: 3093MB FUJITSU MPB3032ATU [6286/16/63] at ata0-master UDMA33 Waiting 15 seconds for SCSI devices to settle Mounting root from ufs:/dev/ad0s1a da0 at ahc0
machdep.hlt_logical_cpus missing in 4.9-Release
I've just installed 4.9-Release on a twin Xeon system and compiled a generic SMP kernel (GENERIC with SMP and APIC_IO enabled). The problem I'm having is the system is using the logical HyperThreading CPUs even though I don't want it to. The errata for 4.9-Release says that the logical CPUs are prevented from executing user processes by default, they are not. It also says you can control this behaviour by change the value of the machdep.hlt_logical_cpus sysctl(8) variable. My sysctl doesn't seem to know about this variable. I've checked the archives and someone else had this problem back in November but I can't see any replys other than machdep.hlt_logical_cpus should be there. Can anyone offer some advise please. Thanks, Jonathan Output from uname -a FreeBSD parker.isd.glam.ac.uk 4.9-RELEASE FreeBSD 4.9-RELEASE #0: Tue Jan 6 10:56:52 GMT 2004 [EMAIL PROTECTED]:/usr/src/sys/compile/GENSMP i386 Output from sysctl -A machdep machdep.consdev: { major = 12, minor = 255 } machdep.adjkerntz: 0 machdep.disable_rtc_set: 0 machdep.bootinfo: Format:S,bootinfo Length:84 Dump:0x010094240400... machdep.wall_cmos_clock: 0 machdep.cs_recv_delay: 570 machdep.wi_cache_mcastonly: 0 machdep.wi_cache_iponly: 1 machdep.do_dump: 1 machdep.pccard.mem_start: 851968 machdep.pccard.mem_end: 983039 machdep.enable_panic_key: 0 machdep.apm_suspend_delay: 1 machdep.apm_standby_delay: 1 machdep.ispc98: 0 machdep.msgbuf: machdep.msgbuf_clear: 0 machdep.cpu_idle_hlt: 1 machdep.guessed_bootdev: /dev/da0s1a machdep.smp_active: 1 machdep.smp_cpus: 4 machdep.invltlb_ok: 1 machdep.do_page_zero_idle: 1 machdep.forward_irq_enabled: 1 machdep.forward_signal_enabled: 1 machdep.forward_roundrobin_enabled: 1 machdep.hlt_cpus: 0 machdep.panic_on_nmi: 1 machdep.i8254_freq: 1193182 machdep.conrclk: 1843200 machdep.conspeed: 9600 Output from dmesg Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.9-RELEASE #0: Tue Jan 6 10:56:52 GMT 2004 [EMAIL PROTECTED]:/usr/src/sys/compile/GENSMP Timecounter i8254 frequency 1193182 Hz CPU: Intel(R) Xeon(TM) CPU 2.66GHz (2666.79-MHz 686-class CPU) Origin = GenuineIntel Id = 0xf29 Stepping = 9 Features=0xbfebfbffFPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA ,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE Hyperthreading: 2 logical CPUs real memory = 2147418112 (2097088K bytes) avail memory = 2086199296 (2037304K bytes) Programming 16 pins in IOAPIC #0 IOAPIC #0 intpin 2 - irq 0 Programming 16 pins in IOAPIC #1 Programming 16 pins in IOAPIC #2 Programming 16 pins in IOAPIC #3 FreeBSD/SMP: Multiprocessor motherboard: 4 CPUs cpu0 (BSP): apic id: 0, version: 0x00050014, at 0xfee0 cpu1 (AP): apic id: 1, version: 0x00050014, at 0xfee0 cpu2 (AP): apic id: 6, version: 0x00050014, at 0xfee0 cpu3 (AP): apic id: 7, version: 0x00050014, at 0xfee0 io0 (APIC): apic id: 8, version: 0x000f0011, at 0xfec0 io1 (APIC): apic id: 9, version: 0x000f0011, at 0xfec01000 io2 (APIC): apic id: 10, version: 0x000f0011, at 0xfec02000 io3 (APIC): apic id: 11, version: 0x000f0011, at 0xfec03000 Preloaded elf kernel kernel at 0xc055. Preloaded userconfig_script /boot/kernel.conf at 0xc055009c. Warning: Pentium 4 CPU: PSE disabled Pentium Pro MTRR support enabled md0: Malloc disk Using $PIR table, 11 entries at 0xc00f4ab0 npx0: math processor on motherboard npx0: INT 16 interface pcib0: ServerWorks host to PCI bridge(unknown chipset) on motherboard IOAPIC #1 intpin 12 - irq 2 IOAPIC #1 intpin 10 - irq 5 IOAPIC #1 intpin 14 - irq 9 IOAPIC #1 intpin 15 - irq 10 IOAPIC #1 intpin 13 - irq 11 IOAPIC #1 intpin 1 - irq 16 pci0: PCI bus on pcib0 em0: Intel(R) PRO/1000 Network Connection, Version - 1.7.16 port 0xc800-0xc83f mem 0xfeb8-0xfeb9 irq 2 at device 8.0 on pci0 em0: Speed:N/A Duplex:N/A em1: Intel(R) PRO/1000 Network Connection, Version - 1.7.16 port 0xd000-0xd03f mem 0xfeba-0xfebb irq 5 at device 9.0 on pci0 em1: Speed:N/A Duplex:N/A ahd0: Adaptec AIC7902 Ultra320 SCSI adapter port 0xd400-0xd4ff,0xd800-0xd8ff mem 0xfebfa000-0xfebfbfff irq 9 at device 10.0 on pci0 aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI 33 or 66Mhz, 512 SCBs ahd1: Adaptec AIC7902 Ultra320 SCSI adapter port 0xe000-0xe0ff,0xe400-0xe4ff mem 0xfebfc000-0xfebfdfff irq 10 at device 10.1 on pci0 aic7902: Ultra320 Wide Channel B, SCSI Id=7, PCI 33 or 66Mhz, 512 SCBs pci0: ATI Mach64-GR graphics accelerator at 11.0 irq 11 atapci0: Generic PCI ATA controller port 0xffa0-0xffaf,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 at device 15.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 ohci0: OHCI (generic) USB controller mem 0xfebfe000-0xfebfefff irq 16 at device 15.2 on pci0 usb0: OHCI version 1.0, legacy support usb0: SMM does not respond, resetting usb0: OHCI (generic) USB
RE: inspiron 8000 pcmcia problem
-Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of paul Sent: Monday, January 05, 2004 5:16 PM To: [EMAIL PROTECTED] Subject: inspiron 8000 pcmcia problem I've already posted this question to -mobile just trying to get as much traffic as possible ok I got a rather frustrating problem if anyone can help me it would be greatly appreciated I've tryed 3 pcmcia cards on my i8k all 3 of them give me device timeouts (netgear fa410tx, smc 8040, and a linksys card) all of which are on the hardware compat list except the smc card which i read somewhere is supported so i gave it a try. Anyway I added pccard_enable=YES pccardd_ifconfig=DHCP tryed ifconfig_ed1=DHCP for fun and i tryed changing the irq port with the -i flag for pccardd_flags and editing pccard.conf. Nothing seems to work I have miibus compiled in the kernel all the proper drivers all 3 of the cards are recognized at boot however i recieve the infamous ed1: device timeout message. The cards work on linux and windows maybe I'm missing something I have never dealt with pcmcia cards until now. I googled for 2 days and asked on numerous irc channels. Am I missing something? It seems to be a rather common problem with all the results from my google searchs. I've also disabled everything in my bios still nothing I've tryed using 4.9, 5.2rc2 and -current with the same results. Someone please help me! I keep hearing its an irq conflict my card gets set to irq 10 its seems even when i try to change it..btw all tryed device.hints and kernel.conf. Thanks -Paul In your bios, is there an option for the pcmcia type?? Such as Auto, cardbus, and something else that I can't remember right now... I don't know if the Dell's have that option, I haven't checked mine, but I know our toshiba's had it. I haven't tried freebsd on a notebook, but when using Novell Netware's Zenworks Imaging, which uses linux base for the clients before imaging, I always had to set that option in bios to be cardbus (auto would not work) for the cards we had (3com/megahertz FE575) in order for it to be detected. -Mike ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: inspiron 8000 pcmcia problem
- Original Message - From: michael Alexander [EMAIL PROTECTED] To: 'paul' [EMAIL PROTECTED]; [EMAIL PROTECTED] Sent: Tuesday, January 06, 2004 9:38 AM Subject: RE: inspiron 8000 pcmcia problem -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of paul Sent: Monday, January 05, 2004 5:16 PM To: [EMAIL PROTECTED] Subject: inspiron 8000 pcmcia problem I've already posted this question to -mobile just trying to get as much traffic as possible ok I got a rather frustrating problem if anyone can help me it would be greatly appreciated I've tryed 3 pcmcia cards on my i8k all 3 of them give me device timeouts (netgear fa410tx, smc 8040, and a linksys card) all of which are on the hardware compat list except the smc card which i read somewhere is supported so i gave it a try. Anyway I added pccard_enable=YES pccardd_ifconfig=DHCP tryed ifconfig_ed1=DHCP for fun and i tryed changing the irq port with the -i flag for pccardd_flags and editing pccard.conf. Nothing seems to work I have miibus compiled in the kernel all the proper drivers all 3 of the cards are recognized at boot however i recieve the infamous ed1: device timeout message. The cards work on linux and windows maybe I'm missing something I have never dealt with pcmcia cards until now. I googled for 2 days and asked on numerous irc channels. Am I missing something? It seems to be a rather common problem with all the results from my google searchs. I've also disabled everything in my bios still nothing I've tryed using 4.9, 5.2rc2 and -current with the same results. Someone please help me! I keep hearing its an irq conflict my card gets set to irq 10 its seems even when i try to change it..btw all tryed device.hints and kernel.conf. Thanks -Paul In your bios, is there an option for the pcmcia type?? Such as Auto, cardbus, and something else that I can't remember right now... I don't know if the Dell's have that option, I haven't checked mine, but I know our toshiba's had it. I haven't tried freebsd on a notebook, but when using Novell Netware's Zenworks Imaging, which uses linux base for the clients before imaging, I always had to set that option in bios to be cardbus (auto would not work) for the cards we had (3com/megahertz FE575) in order for it to be detected. -Mike Nope there is no option in the bios for pcmcia, also i read somewhere to set the pcic0 irq option in the kernel to the same irq as your network card?. I tryed that didn't work also Paul ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Getting rid of sendmail
I'm looking for a way to entirely remove an MTA from a box and forward everything to another host. I've found the /etc/mail/aliases file and saw that I could configure it so that root would point to something else, so that's half the battle, possibly. Once that's done, however, is it simply a matter of setting sendmail_enable=NONE in /etc/rc.conf to disable sendmail, or is there more I could/should do, to still keep having the cron job outputs sent to the place I'd specify in /etc/mail/aliases? I mostly don't want the daemon running, but still want access to my email. Thanks! ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
mount Siemens m55
i would like to mount my siemens m55. it would be identified as ugen0: Prolific Technology PL2303 Serial adapter (ATEN/IOGEAR UC232A), rev 1.10/2.02, addr 2 i allways get: /dev/ugen0.2: Block device required what is the problem? i also tried to fix it in /usr/src/sys/dev/usb/umass.c but it will not work! -- Mit freundlichen Grüßen Michael Hollmann JAWA Management Software GmbH A-8041 Graz, Liebenauer Hauptstraße 200 Tel: ++43 (0)316 403274-13 Fax: ++43 (0)316 403274-10 GSM: ++43 (0)676 4101431 E-Mail: [EMAIL PROTECTED] Web: http://www.jawa.at/ News: http://www.jawa.at/news.php Web-Framework für B2B-Applikationen ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
ps: warning: /var/run/dev.db: No such file or directory
I recently rebooted a server that had been running for many months. I haven't touched the kernel or userland programs since it went into production. The server was rebooted with 'shutdown -h now', powered down, and then later restarted. I've since noticed that cron didn't restart, which is odd, but fixable, but more importantly, when I run ps, it spits out 'ps: warning: /var/run/dev.db: No such file or directory' (although, as far as I can tell, the output is perfectly reasonable). I'm wondering if one is a symptom of the other. In any event, /var/run/dev.db is most certainly not there. I guess I could reboot the server tonight, but I'm not sure that that will fix it, as I don't understand the cause. I've searched the archives a bit, and the best thread I could find dated from 1997, and suggested that it could be due to an unclean shutdown, which is definitely not the case here. I'm running FreeBSD 4.8-STABLE, where stable is defined as being what it was around June 2003. I'd be grateful for any pointers you might have. Thanks, David -- Commercial OS breeds commerce, whereas free OS breeds freedom, the only thing more dangerous and confusing than commerce. -- Michael R. Jinks, redhat-list, circa 1997 ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: mount Siemens m55
ugen0: Prolific Technology PL2303 Serial adapter (ATEN/IOGEAR UC232A), rev 1.10/2.02, addr 2 i allways get: /dev/ugen0.2: Block device required ugen(4) is the generic USB device driver. Your device is not being recognized. I don't think the M55 is a standard umass device, so I'd guess you're pretty much SoL. Did you try this here? Port: scmxx-0.6.4 Path: /usr/ports/comms/scmxx Info: Data exchange utility for Siemens mobile phones Cheers, J. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Getting rid of sendmail
I think what you want is: sendmail_enable=NO NONE removes all mail sending ability on the local machine - not what you want if I interpret your post correctly... On Tue, 06 Jan 2004 07:59:38 -0700 Emmanuel Gravel [EMAIL PROTECTED] wrote: I'm looking for a way to entirely remove an MTA from a box and forward everything to another host. I've found the /etc/mail/aliases file and saw that I could configure it so that root would point to something else, so that's half the battle, possibly. Once that's done, however, is it simply a matter of setting sendmail_enable=NONE in /etc/rc.conf to disable sendmail, or is there more I could/should do, to still keep having the cron job outputs sent to the place I'd specify in/etc/mail/aliases? I mostly don't want the daemon running, but still want access to my email. Thanks! ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Cannot find file system superblock error - how to recover?
On Tue, 6 Jan 2004 06:31:08 -0800 (PST) Scott I. Remick [EMAIL PROTECTED] probably wrote: --- Sergey 'DoubleF' Zaharchenko [EMAIL PROTECTED] wrote: And maybe prefix that by a $ bsdlabel -R /dev/ad6s1c dislabel.ad6s1c.new Sorry that was to be $ bsdlabel -R -n /dev/ad6s1c dislabel.ad6s1c.new :( which would just check your new layout for errors, without writing anything, and print your file out as disklabel understands it. So you're saying, run it as user and not root for the sake of testing it in a read-only setting? Would that be better than using -n? From the man page: The -n stops the bsdlabel program right before the disk would have been modified, and displays the result instead of writing it. And lastly... your talk about offsets. The man page for bsdlabel describes using it on the whole disk (ad6) and not a slice or partition. If I run it It can't be fdisk that you are reading about? Nope. man bsdlabel mentions: disk represents the disk in question, and may be in the form da0 or /dev/da0. It will display the partition layout. But I see now all the later examples mention da0s1 so maybe I misunderstood. A little before that the manual says: Disk device name All disklabel forms require a disk device name, which should always be the raw device name representing the disk or slice. For example da0 rep- resents the entire disk regardless of any DOS partitioning, and da0s1 represents a slice. Some devices, most notably ccd, require that the So that da0 is just an example, albeit a perverted one. And the `new' one seems to be correct for a 80G drive (+- a couple of megabytes)? Have you touched anything? Now, mount might work. Haven't changed anything yet. Which one are you calling the new one? Mount The one you sent the last time (with the 0-s). would be done on the partion (ad6s1c) which gives errors with bsdlabel and has an offset of 63, not the whole slice (ad6s1) which has an offset of 0 and doesn't give errors (with bsdlabel). Uhum. disklabel said that the offset was 63 in your previous posting, didn't it? 63 for ad6s1c, 0 for ad6s1. This is what's got Malcolm confused. It confuses me too. What does # ls -l /dev/ad6s1 /dev/ad6s1c say? Any differences? I have none. su-2.05b# ls -l /dev/ad6s1 /dev/ad6s1c crw-r- 1 root operator4, 20 Dec 29 08:11 /dev/ad6s1 crw-r- 1 root operator4, 21 Dec 29 08:11 /dev/ad6s1c Indeed it's not like in 4.x, where they were the same. And what about # ls -l /dev/ad6s1a /dev/ad6s1b (these minor numbers don't seem to be in order). Anyway, the correct beginning for the filesystem is 0 (starting with ad6s1), as the superblock is 16 sectors from there. And to recap: su-2.05b# bsdlabel /dev/ad6s1 # /dev/ad6s1: 8 partitions: #size offsetfstype [fsize bsize bps/cpg] c: 1563445170unused0 0 # raw part, don't edit e: 15634451704.2BSD 2048 1638489 su-2.05b# bsdlabel /dev/ad6s1c # /dev/ad6s1c: 8 partitions: #size offsetfstype [fsize bsize bps/cpg] c: 156344517 63unused0 0 # raw part, don't edit e: 156344517 634.2BSD 2048 1638489 partition c: partition extends past end of unit bsdlabel: partition c doesn't start at 0! bsdlabel: An incorrect partition c may cause problems for standard system utilities partition e: partition extends past end of unit Indeed. I'm confused. 5.x doesn't look like 4.x. 2 different(?) labels on the same slice don't look good to me (or are the nubers just calculated differently?). I will probably download some 5.1 boot floppies to reproduce the situation. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] -- DoubleF Speak softly and carry a +6 two-handed sword. pgp0.pgp Description: PGP signature
Opera7 won't install from ports collection
I want to install Opera onto my freebsd version 4.9 system and in the /usr/ports/www/opera direcory I issue a make install clean I get the following error (see below). Becausse i think my port is looking for opera-7.20-20030919 while the ftp servers are offering opera-7.23-20031119 or something like that. What can I do about it? 1) get the old source (but from where) 2) use the new one and rename it to 20030919..but I think that will go wrong Can anyone help me with this because I can't browse the net!! === ** === NOTE: The native version of Opera can not be === installed at the same time as linux-opera. If you === already have www/linux-opera installed, we === recommend you press Ctrl-C now and deinstall it. === ** opera-7.20-20030919.1-static-qt.i386.freebsd.tar.bz2 doesn't seem to exist in /usr/ports/distfiles/. Attempting to fetch from http://snapshot.opera.com/unix/7.20-Beta-12/intel-freebsd/. Attempting to fetch from ftp://ftp.FreeBSD.org/pub/FreeBSD/ports/distfiles/. Couldn't fetch it - please try to retrieve this port manually into /usr/ports/distfiles/ and try again. *** Error code 1 Stop in /usr/ports/www/opera. __ Do you Yahoo!? Yahoo! Hotjobs: Enter the Signing Bonus Sweepstakes http://hotjobs.sweepstakes.yahoo.com/signingbonus ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Opera7 won't install from ports collection
--On Tuesday, January 06, 2004 07:40:31 -0800 Dino Vliet [EMAIL PROTECTED] wrote: I want to install Opera onto my freebsd version 4.9 system and in the /usr/ports/www/opera direcory I issue a make install clean I get the following error (see below). Becausse i think my port is looking for opera-7.20-20030919 while the ftp servers are offering opera-7.23-20031119 or something like that. What can I do about it? 1) get the old source (but from where) 2) use the new one and rename it to 20030919..but I think that will go wrong Can anyone help me with this because I can't browse the net!! update your ports collection using CVSup. LER === ** === NOTE: The native version of Opera can not be === installed at the same time as linux-opera. If you === already have www/linux-opera installed, we === recommend you press Ctrl-C now and deinstall it. === ** opera-7.20-20030919.1-static-qt.i386.freebsd.tar.bz2 doesn't seem to exist in /usr/ports/distfiles/. Attempting to fetch from http://snapshot.opera.com/unix/7.20-Beta-12/intel-freebsd/. Attempting to fetch from ftp://ftp.FreeBSD.org/pub/FreeBSD/ports/distfiles/. Couldn't fetch it - please try to retrieve this port manually into /usr/ports/distfiles/ and try again. *** Error code 1 Stop in /usr/ports/www/opera. __ Do you Yahoo!? Yahoo! Hotjobs: Enter the Signing Bonus Sweepstakes http://hotjobs.sweepstakes.yahoo.com/signingbonus ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] -- Larry Rosenman http://www.lerctr.org/~ler Phone: +1 972-414-9812 E-Mail: [EMAIL PROTECTED] US Mail: 1905 Steamboat Springs Drive, Garland, TX 75044-6749 pgp0.pgp Description: PGP signature
Quit gcc from base install
I want to use a FreeBSD like a production server and I don't need gcc in it. Can I quit or uninstall gcc from the base install? -- José María Ruiz Aguilera (www.tessier-ashpool.tk) Estudiante de Ingeniería Técnica de Informática de Sistemas Miembro de la Rama de estudiantes del IEEE de Málaga pgp0.pgp Description: PGP signature
Re: Getting rid of sendmail
On Tue, Jan 06, 2004 at 07:59:38AM -0700, Emmanuel Gravel wrote: I'm looking for a way to entirely remove an MTA from a box and forward everything to another host. I've found the /etc/mail/aliases file and saw that I could configure it so that root would point to something else, so that's half the battle, possibly. Once that's done, however, is it simply a matter of setting sendmail_enable=NONE in /etc/rc.conf to disable sendmail, or is there more I could/should do, to still keep having the cron job outputs sent to the place I'd specify in /etc/mail/aliases? I mostly don't want the daemon running, but still want access to my email. This is starting to turn into a FAQ. Here's an answer I gave earlier: http://lists.freebsd.org/pipermail/freebsd-questions/2003-December/029497.html Cheers, Matthew -- Dr Matthew J Seaman MA, D.Phil. 26 The Paddocks Savill Way PGP: http://www.infracaninophile.co.uk/pgpkey Marlow Tel: +44 1628 476614 Bucks., SL7 1TH UK pgp0.pgp Description: PGP signature
Re: Quit gcc from base install
On Tue, Jan 06, 2004 at 04:45:30PM +0100, Jose Maria wrote: I want to use a FreeBSD like a production server and I don't need gcc in it. Can I quit or uninstall gcc from the base install? FreeBSD is a good choice for a production server. Sure you can remove gcc if you want -- but you'll have to do it manually after installing the system the normal way. You'll lose the ability to update the system as required when security patches come out and give yourself occasional grief in other ways, but you can certainly remove gcc. I'm really not sure what the point of doing this is. If it's on security grounds then you need to beware of woolly-minded thinking: anyone capable of breaking into a properly secured FreeBSD box will be eminiently capable of copying gcc onto it as well. Of of compiling programs elsewhere and copying the results onto the machine. Cheers, Matthew -- Dr Matthew J Seaman MA, D.Phil. 26 The Paddocks Savill Way PGP: http://www.infracaninophile.co.uk/pgpkey Marlow Tel: +44 1628 476614 Bucks., SL7 1TH UK pgp0.pgp Description: PGP signature
Re: Viability of 5.X line for production use
On Mon, Jan 05, 2004 at 09:43:26AM -0800, John Fox wrote: Hello, We're planning some new mail servers, and until now I've been assuming that they would run under FreeBSD 4.X. But it occurred to me this morning that the 4.X line is going to go away relatively soon, and that perhaps I'd be better off going with 5.X for these new boxen, as it would probably simplify the upgrade (keeping up with releases and bug fixes) process. So I'm wondering -- do the experts here judge 5.X as ready for use in a production environment, or would that be asking for trouble? Wait for 5.2-R to come out, then wait a month or more for any undetected serious bugs to get fixed in the release branch. Then try it on one machine and see how it fares. Kris pgp0.pgp Description: PGP signature
Commercial Distribution?
Hi, first of all I want to congratulate you on FreeBSD, it is a really cool system! I have a question regarding the creation of a branded commercial distribution based on FreeBSD. Here is the thing: my company wants to offer a standard corporate Unix desktop that is certified (guaranteed) to run our enterprise management software well. We looked into Linux but, for various reasons, a solution based on FreeBSD makes more sense for us. Basically we want to release a CD to our customers which installs our own customized FreeBSD environment, with our own brand name. If we want to do this, it is clear that we - must preserve the copyright notices - should place a description like based on the FreeBSD Project on the package - redistribute GPLed source if modified - swap out references to freebsd support list in the distro so our customers don't spam the community - honor the redistribution rules of the ports - should make a donation to the project as profits allow Are there any FreeBSD references that MUST be taken out / MUST be left in? Are there any other legal or technical issues? How do people on FreeBSD feel about commercial distributions generally? Are we going to get sued by SCO? (just kidding, sort of) Your feedback would be very much appreciated. Thanks in advance. Regards, Udo --- Udo Schrter Trionic Technologies GmbH August-Horch-Strasse 14 67547 Worms (Germany) Tel: 06241/3029-0 Fax: 06241/3029-10 http://www.trionic.de ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Cannot find file system superblock error - how to recover?
--- Sergey 'DoubleF' Zaharchenko [EMAIL PROTECTED] wrote: Sorry that was to be $ bsdlabel -R -n /dev/ad6s1c dislabel.ad6s1c.new :( No worries... I figured it out :) Indeed it's not like in 4.x, where they were the same. And what about # ls -l /dev/ad6s1a /dev/ad6s1b (these minor numbers don't seem to be in order). Neither exists. Just so you know: My motherboard (Asus A7V133) has 2 integrated IDE controllers. Besides the native VIA controller there is a Promise ATA100. The following are the relevant snippets from dmesg: atapci0: VIA 82C686B UDMA100 controller port 0xd800-0xd80f at device 4.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 atapci1: Promise PDC20265 UDMA100 controller port 0x8000-0x803f,0x8400-0x8403,0x8800-0x8807,0x9000-0x9003,0x9400-0x9407 mem 0xd400-0xd401 irq 10 at device 17.0 on pci0 ata2: at 0x9400 on atapci1 ata3: at 0x8800 on atapci1 ad4: 19595MB MAXTOR 6L020L1 [39813/16/63] at ata2-master UDMA100 ad6: 76345MB MAXTOR 6L080J4 [155114/16/63] at ata3-master UDMA100 acd0: CDROM CRD-8400B at ata0-master PIO4 Mounting root from ufs:/dev/ad4s1a cd0 at ata0 bus 0 target 0 lun 0 cd0: LG CD-ROM CRD-8400B 1.03 Removable CD-ROM SCSI-0 device cd0: 16.000MB/s transfers cd0: cd present [279440 x 2048 byte records] (yes, I use atapicam) and ls /dev/ad*: crw-r- 1 root operator4, 10 Dec 29 08:11 /dev/ad4 crw-r- 1 root operator4, 12 Dec 29 08:11 /dev/ad4s1 crw-r- 1 root operator4, 14 Dec 29 03:11 /dev/ad4s1a crw-r- 1 root operator4, 15 Dec 29 08:11 /dev/ad4s1b crw-r- 1 root operator4, 16 Dec 29 08:11 /dev/ad4s1c crw-r- 1 root operator4, 17 Dec 29 03:11 /dev/ad4s1d crw-r- 1 root operator4, 18 Dec 29 03:11 /dev/ad4s1e crw-r- 1 root operator4, 19 Dec 29 03:11 /dev/ad4s1f crw-r- 1 root operator4, 13 Dec 29 08:11 /dev/ad6 crw-r- 1 root operator4, 20 Dec 29 08:11 /dev/ad6s1 crw-r- 1 root operator4, 21 Dec 29 08:11 /dev/ad6s1c crw-r- 1 root operator4, 22 Dec 29 08:11 /dev/ad6s1e Let me know if you come up with any suggestions on what I should try next. Thanks ever so much! ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Opera7 won't install from ports collection
How to get cvsup to get past my proxy-server? --- Larry Rosenman [EMAIL PROTECTED] wrote: --On Tuesday, January 06, 2004 07:40:31 -0800 Dino Vliet [EMAIL PROTECTED] wrote: I want to install Opera onto my freebsd version 4.9 system and in the /usr/ports/www/opera direcory I issue a make install clean I get the following error (see below). Becausse i think my port is looking for opera-7.20-20030919 while the ftp servers are offering opera-7.23-20031119 or something like that. What can I do about it? 1) get the old source (but from where) 2) use the new one and rename it to 20030919..but I think that will go wrong Can anyone help me with this because I can't browse the net!! update your ports collection using CVSup. LER === ** === NOTE: The native version of Opera can not be === installed at the same time as linux-opera. If you === already have www/linux-opera installed, we === recommend you press Ctrl-C now and deinstall it. === ** opera-7.20-20030919.1-static-qt.i386.freebsd.tar.bz2 doesn't seem to exist in /usr/ports/distfiles/. Attempting to fetch from http://snapshot.opera.com/unix/7.20-Beta-12/intel-freebsd/. Attempting to fetch from ftp://ftp.FreeBSD.org/pub/FreeBSD/ports/distfiles/. Couldn't fetch it - please try to retrieve this port manually into /usr/ports/distfiles/ and try again. *** Error code 1 Stop in /usr/ports/www/opera. __ Do you Yahoo!? Yahoo! Hotjobs: Enter the Signing Bonus Sweepstakes http://hotjobs.sweepstakes.yahoo.com/signingbonus ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] -- Larry Rosenman http://www.lerctr.org/~ler Phone: +1 972-414-9812 E-Mail: [EMAIL PROTECTED] US Mail: 1905 Steamboat Springs Drive, Garland, TX 75044-6749 ATTACHMENT part 2 application/pgp-signature __ Do you Yahoo!? Yahoo! Hotjobs: Enter the Signing Bonus Sweepstakes http://hotjobs.sweepstakes.yahoo.com/signingbonus ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Cannot find file system superblock error - how to recover?
On Tue, 6 Jan 2004 08:32:31 -0800 (PST) Scott I. Remick [EMAIL PROTECTED] probably wrote: I'm in the process of downloading the floppies... --- Sergey 'DoubleF' Zaharchenko [EMAIL PROTECTED] wrote: Sorry that was to be $ bsdlabel -R -n /dev/ad6s1c dislabel.ad6s1c.new :( No worries... I figured it out :) Indeed it's not like in 4.x, where they were the same. And what about # ls -l /dev/ad6s1a /dev/ad6s1b (these minor numbers don't seem to be in order). Neither exists. Just so you know: My motherboard (Asus A7V133) has 2 Ouch! I've forgotten about devfs. So these numbers could be OK. integrated IDE controllers. Besides the native VIA controller there is a Promise ATA100. The following are the relevant snippets from dmesg: And what about ad4? Does disklabel show different values for the slice and the `c' partition? -- DoubleF Chicago law prohibits eating in a place that is on fire. pgp0.pgp Description: PGP signature
RE: Viability of 5.X line for production use
How long can you wait for the 5.x stable release? The 5.x stable release is scheduled for May or June 2004. Then 1 or 2 months burn in by public users to verify it is really stable and you are pushing September. 4.9 is production now and has passed the public burn in period with flying colors. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Kris Kennaway Sent: Tuesday, January 06, 2004 11:18 AM To: John Fox Cc: [EMAIL PROTECTED] Subject: Re: Viability of 5.X line for production use On Mon, Jan 05, 2004 at 09:43:26AM -0800, John Fox wrote: Hello, We're planning some new mail servers, and until now I've been assuming that they would run under FreeBSD 4.X. But it occurred to me this morning that the 4.X line is going to go away relatively soon, and that perhaps I'd be better off going with 5.X for these new boxen, as it would probably simplify the upgrade (keeping up with releases and bug fixes) process. So I'm wondering -- do the experts here judge 5.X as ready for use in a production environment, or would that be asking for trouble? Wait for 5.2-R to come out, then wait a month or more for any undetected serious bugs to get fixed in the release branch. Then try it on one machine and see how it fares. Kris ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Cannot find file system superblock error - how to recover?
--- Sergey 'DoubleF' Zaharchenko [EMAIL PROTECTED] wrote: I'm in the process of downloading the floppies... ok cool And what about ad4? Does disklabel show different values for the slice and the `c' partition? Hmm not only are they different as w/ ad6, but I get the same error on the c partition: su-2.05b# bsdlabel /dev/ad4s1 # /dev/ad4s1: 8 partitions: #size offsetfstype [fsize bsize bps/cpg] a: 102400004.2BSD 2048 16384 64008 b: 2097152 1024000 swap c: 401314410unused0 0 # raw part, don't edit d: 524288 31211524.2BSD 2048 16384 32776 e: 1024000 36454404.2BSD 2048 16384 64008 f: 35462001 46694404.2BSD 2048 16384 28552 su-2.05b# bsdlabel /dev/ad4s1c # /dev/ad4s1c: 8 partitions: #size offsetfstype [fsize bsize bps/cpg] a: 1024000 634.2BSD 2048 16384 64008 b: 2097152 1024063 swap c: 40131441 63unused0 0 # raw part, don't edit d: 524288 31212154.2BSD 2048 16384 32776 e: 1024000 36455034.2BSD 2048 16384 64008 f: 35462001 46695034.2BSD 2048 16384 28552 partition c: partition extends past end of unit bsdlabel: partition c doesn't start at 0! bsdlabel: An incorrect partition c may cause problems for standard system utilities partition f: partition extends past end of unit The plot thickens... ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Opera7 won't install from ports collection
On Tue, 6 Jan 2004 08:37:58 -0800 (PST), Dino Vliet [EMAIL PROTECTED] said: How to get cvsup to get past my proxy-server? --- Larry Rosenman [EMAIL PROTECTED] wrote: --On Tuesday, January 06, 2004 07:40:31 -0800 Dino Vliet [EMAIL PROTECTED] wrote: I want to install Opera onto my freebsd version 4.9 system and in the /usr/ports/www/opera direcory I issue a make install clean I get the following error (see below). Becausse i think my port is looking for opera-7.20-20030919 while the ftp servers are offering opera-7.23-20031119 or something like that. What can I do about it? 1) get the old source (but from where) 2) use the new one and rename it to 20030919..but I think that will go wrong Can anyone help me with this because I can't browse the net!! update your ports collection using CVSup. LER === ** === NOTE: The native version of Opera can not be === installed at the same time as linux-opera. If you === already have www/linux-opera installed, we === recommend you press Ctrl-C now and deinstall it. === ** opera-7.20-20030919.1-static-qt.i386.freebsd.tar.bz2 doesn't seem to exist in /usr/ports/distfiles/. Attempting to fetch from http://snapshot.opera.com/unix/7.20-Beta-12/intel-freebsd/. Attempting to fetch from ftp://ftp.FreeBSD.org/pub/FreeBSD/ports/distfiles/. Couldn't fetch it - please try to retrieve this port manually into /usr/ports/distfiles/ and try again. *** Error code 1 Stop in /usr/ports/www/opera. If you can't ftp or cvsup with the proxy server, I'd suggest using another PC to download an updated ports collection, then the files for Opera and dependencies (these aren't terribly large, so it won't take very long even on a slow connection) and burning these to a CD. You can then use these to update your system that is behind the proxy server and build Opera. Jud ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Adding a drive in vinum
Hi, A few months ago, I did : concat -n data -v /dev/ad2e which produced : drive vinumdrive0 device /dev/ad2 volume data plex name data.p0 org concat vol data sd name data.p0.s0 drive vinumdrive0 plex data.p0 len 241254455s driveoffset 265s plexoffset 0s Now, I've added a new drive to my box, and I want to grow the vinum concat plex. I know I should do some attach thing, but I can't decide what exactly I should put after that command. The new drive is ad3, with an ad3e partition ready to be added. Thanks for any hints :) -- Mathieu Arnold ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
how to use lseek() system call with over 2G files?
Hi everybody! Some time ago there wasn't any possibility to create disk file larger than 2G and there was no problem with lseek(). But as for now we can do it but I looked into headers and found off_t is equal to long - no more than 2G on i386 machines. As far as lseek() is a system call I cannot believe it cannot be used with larger files but how? Maybe it's a silly question? :0) Alex ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Cannot find file system superblock error - how to recover?
On Tue, 6 Jan 2004 09:12:22 -0800 (PST) Scott I. Remick [EMAIL PROTECTED] probably wrote: --- Sergey 'DoubleF' Zaharchenko [EMAIL PROTECTED] wrote: I'm in the process of downloading the floppies... ok cool I can't find a zero-bad floppy in this place! It's all the holidays! And what about ad4? Does disklabel show different values for the slice and the `c' partition? Hmm not only are they different as w/ ad6, but I get the same error on the c partition: su-2.05b# bsdlabel /dev/ad4s1 # /dev/ad4s1: 8 partitions: #size offsetfstype [fsize bsize bps/cpg] a: 102400004.2BSD 2048 16384 64008 b: 2097152 1024000 swap c: 401314410unused0 0 # raw part, don't edit d: 524288 31211524.2BSD 2048 16384 32776 e: 1024000 36454404.2BSD 2048 16384 64008 f: 35462001 46694404.2BSD 2048 16384 28552 su-2.05b# bsdlabel /dev/ad4s1c # /dev/ad4s1c: 8 partitions: #size offsetfstype [fsize bsize bps/cpg] a: 1024000 634.2BSD 2048 16384 64008 b: 2097152 1024063 swap c: 40131441 63unused0 0 # raw part, don't edit d: 524288 31212154.2BSD 2048 16384 32776 e: 1024000 36455034.2BSD 2048 16384 64008 f: 35462001 46695034.2BSD 2048 16384 28552 partition c: partition extends past end of unit bsdlabel: partition c doesn't start at 0! bsdlabel: An incorrect partition c may cause problems for standard system utilities partition f: partition extends past end of unit The plot thickens... With `c', they're all offset by 63(why?). But still, you can mount the partitions on the ad4s1, so the disklabel should be ok... -- DoubleF Is your job running? You'd better go catch it! pgp0.pgp Description: PGP signature
Re: Opera7 won't install from ports collection
But I installed freebsd through the http proxy server and that went fine. I can install all other packages just fine because I've set the http_proxy environment variable to our proxy server and everything works fine. Only the cvsup won't work. I'm now installing mozilla-firebird:-( --- Jud [EMAIL PROTECTED] wrote: On Tue, 6 Jan 2004 08:37:58 -0800 (PST), Dino Vliet [EMAIL PROTECTED] said: How to get cvsup to get past my proxy-server? --- Larry Rosenman [EMAIL PROTECTED] wrote: --On Tuesday, January 06, 2004 07:40:31 -0800 Dino Vliet [EMAIL PROTECTED] wrote: I want to install Opera onto my freebsd version 4.9 system and in the /usr/ports/www/opera direcory I issue a make install clean I get the following error (see below). Becausse i think my port is looking for opera-7.20-20030919 while the ftp servers are offering opera-7.23-20031119 or something like that. What can I do about it? 1) get the old source (but from where) 2) use the new one and rename it to 20030919..but I think that will go wrong Can anyone help me with this because I can't browse the net!! update your ports collection using CVSup. LER === ** === NOTE: The native version of Opera can not be === installed at the same time as linux-opera. If you === already have www/linux-opera installed, we === recommend you press Ctrl-C now and deinstall it. === ** opera-7.20-20030919.1-static-qt.i386.freebsd.tar.bz2 doesn't seem to exist in /usr/ports/distfiles/. Attempting to fetch from http://snapshot.opera.com/unix/7.20-Beta-12/intel-freebsd/. Attempting to fetch from ftp://ftp.FreeBSD.org/pub/FreeBSD/ports/distfiles/. Couldn't fetch it - please try to retrieve this port manually into /usr/ports/distfiles/ and try again. *** Error code 1 Stop in /usr/ports/www/opera. If you can't ftp or cvsup with the proxy server, I'd suggest using another PC to download an updated ports collection, then the files for Opera and dependencies (these aren't terribly large, so it won't take very long even on a slow connection) and burning these to a CD. You can then use these to update your system that is behind the proxy server and build Opera. Jud __ Do you Yahoo!? Yahoo! Hotjobs: Enter the Signing Bonus Sweepstakes http://hotjobs.sweepstakes.yahoo.com/signingbonus ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Poor SCSI disk preformance
I also had (meaning it is not currently attached) a different SCSI drive attached on the bus, with the same results. Has anyone any tips for this from a FreeBSD point of view? I wouldn't say that dd is the greatest benchmarking tool. You may want to try benchmarks/rawio. Also, try monitoring diffferent types of transfers to and from another physical disk with iostat. I'm not sure what your speed expectations are, but you're running a 7200 RPM Ultra Wide disk on an Ultra Wide host adapter; not exactly the fastest SCSI technology. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Cannot find file system superblock error - how to recover?
--- Sergey 'DoubleF' Zaharchenko [EMAIL PROTECTED] wrote: I can't find a zero-bad floppy in this place! It's all the holidays! That's what AOL disks (vs. discs) used to be good for. :) With `c', they're all offset by 63(why?). But still, you can mount the partitions on the ad4s1, so the disklabel should be ok... Yeah. Starts to suggest what we were thinking was a evidence related to the problem is really unrelated and normal behavior (is disklabel/bsdlabel only meant to be run on slices and not bsd-partitions?). Are we looking in the wrong place? What about that potentially good superblock we found a while ago? (the skip 16 one that contained /data in it) Should we be saving that somewhere while we can? (how?) Anyone out there know 5.x file-system dirtiness like the back of their hand? C'mon, you know you wanna join the fun. :) Where's my time machine so I can go back and back up this drive... ah well I'm learning a ton. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: how to use lseek() system call with over 2G files?
In the last episode (Jan 06), Alex said: Hi everybody! Some time ago there wasn't any possibility to create disk file larger than 2G and there was no problem with lseek(). Some time ago meaning around 1997? FreeBSD has had 64-bit file access since at least 2.2.0. I don't remember if earlier versions had support for it or not. But as for now we can do it but I looked into headers and found off_t is equal to long - no more than 2G on i386 machines. Actually, off_t is equal to __int64_t, which is a long long. Which headers are you looking at? FreeBSD 4.x: /usr/include/machine/ansi.h:69:#define _BSD_OFF_T_ __int64_t /usr/include/sys/types.h:82:typedef _BSD_OFF_T_ off_t; /* file offset */ FreeBSD 5.x: /usr/include/sys/_types.h:49:typedef__int64_t __off_t; /* file offset */ /usr/include/sys/types.h:194:typedef __off_t off_t; /* file offset */ -- Dan Nelson [EMAIL PROTECTED] ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: how to use lseek() system call with over 2G files?
On Tue, Jan 06, 2004 at 08:32:23PM +0300, Alex wrote: Hi everybody! Some time ago there wasn't any possibility to create disk file larger than 2G and there was no problem with lseek(). But as for now we can do it but I looked into headers and found off_t is equal to long - no more than 2G on i386 machines. As far as lseek() is a system call I cannot believe it cannot be used with larger files but how? Maybe it's a silly question? :0) Not a silly question, but one based on false assumptions. FreeBSD has been able to create files larger than 2G for a long time. off_t is a 64-bit type, and therefore is quite capable of representing sizes larger than 2G. lseek() has no problem handling files larger than 2G. -- Insert your favourite quote here. Erik Trulsson [EMAIL PROTECTED] ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Opera7 won't install from ports collection
CVSup uses a different port. Did you get the mail I sent with the port included? LER --On Tuesday, January 06, 2004 09:42:25 -0800 Dino Vliet [EMAIL PROTECTED] wrote: But I installed freebsd through the http proxy server and that went fine. I can install all other packages just fine because I've set the http_proxy environment variable to our proxy server and everything works fine. Only the cvsup won't work. I'm now installing mozilla-firebird:-( --- Jud [EMAIL PROTECTED] wrote: On Tue, 6 Jan 2004 08:37:58 -0800 (PST), Dino Vliet [EMAIL PROTECTED] said: How to get cvsup to get past my proxy-server? --- Larry Rosenman [EMAIL PROTECTED] wrote: --On Tuesday, January 06, 2004 07:40:31 -0800 Dino Vliet [EMAIL PROTECTED] wrote: I want to install Opera onto my freebsd version 4.9 system and in the /usr/ports/www/opera direcory I issue a make install clean I get the following error (see below). Becausse i think my port is looking for opera-7.20-20030919 while the ftp servers are offering opera-7.23-20031119 or something like that. What can I do about it? 1) get the old source (but from where) 2) use the new one and rename it to 20030919..but I think that will go wrong Can anyone help me with this because I can't browse the net!! update your ports collection using CVSup. LER === ** === NOTE: The native version of Opera can not be === installed at the same time as linux-opera. If you === already have www/linux-opera installed, we === recommend you press Ctrl-C now and deinstall it. === ** opera-7.20-20030919.1-static-qt.i386.freebsd.tar.bz2 doesn't seem to exist in /usr/ports/distfiles/. Attempting to fetch from http://snapshot.opera.com/unix/7.20-Beta-12/intel-freebsd/. Attempting to fetch from ftp://ftp.FreeBSD.org/pub/FreeBSD/ports/distfiles/. Couldn't fetch it - please try to retrieve this port manually into /usr/ports/distfiles/ and try again. *** Error code 1 Stop in /usr/ports/www/opera. If you can't ftp or cvsup with the proxy server, I'd suggest using another PC to download an updated ports collection, then the files for Opera and dependencies (these aren't terribly large, so it won't take very long even on a slow connection) and burning these to a CD. You can then use these to update your system that is behind the proxy server and build Opera. Jud __ Do you Yahoo!? Yahoo! Hotjobs: Enter the Signing Bonus Sweepstakes http://hotjobs.sweepstakes.yahoo.com/signingbonus -- Larry Rosenman http://www.lerctr.org/~ler Phone: +1 972-414-9812 E-Mail: [EMAIL PROTECTED] US Mail: 1905 Steamboat Springs Drive, Garland, TX 75044-6749 pgp0.pgp Description: PGP signature
Re: Poor SCSI disk preformance
In the last episode (Jan 06), Mike Maltese said: I also had (meaning it is not currently attached) a different SCSI drive attached on the bus, with the same results. Has anyone any tips for this from a FreeBSD point of view? I wouldn't say that dd is the greatest benchmarking tool. You may want to try benchmarks/rawio. Also, try monitoring diffferent types of transfers to and from another physical disk with iostat. I'm not sure what your speed expectations are, but you're running a 7200 RPM Ultra Wide disk on an Ultra Wide host adapter; not exactly the fastest SCSI technology. It should go faster than 5MB/sec, though. Seagate's specs say that drive should do 14MB/sec max. UW's top speed is 40MB/sec, so there shouldn't be any bottlenecks. -- Dan Nelson [EMAIL PROTECTED] ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
why does inetd default to enable
The 4.9 /etc/defaults/rc.conf file has inetd_enable=YES Why is that? During the sysinstall I answered NO to inetd question. Is this not an error? ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: why does inetd default to enable
In the last episode (Jan 06), fbsd_user said: The 4.9 /etc/defaults/rc.conf file has inetd_enable=YES Why is that? During the sysinstall I answered NO to inetd question. Is this not an error? sysinstall should have created an /etc/rc.conf with inetd_enable=NO in it, to override the default. -- Dan Nelson [EMAIL PROTECTED] ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Commercial Distribution?
Udo Schrter (Trionic Technologies) wrote: [ ... ] I have a question regarding the creation of a branded commercial distribution based on FreeBSD. OK. Here is the thing: my company wants to offer a standard corporate Unix desktop that is certified (guaranteed) to run our enterprise management software well. We looked into Linux but, for various reasons, a solution based on FreeBSD makes more sense for us. Basically we want to release a CD to our customers which installs our own customized FreeBSD environment, with our own brand name. You're creating a turnkey system with a known and well-defined layout which includes all of the dependencies to run your proprietary software. Look into man release, which discusses how to customize a build and create CD images. You should also consider managing your software and it's dependencies as a port, even though you might never submit the port of your software. On the other hand, some people like anti-virus vendors have their commercial products available as a port on a time-limited trial basis (security/vscan, , but that's up to you... If we want to do this, it is clear that we - must preserve the copyright notices - should place a description like based on the FreeBSD Project on the package Yes. Basicly, you should follow and include /COPYRIGHT and /usr/src/gnu/COPYING, depending on how much of the documentation and so forth you include or remove from your particular distribution. - redistribute GPLed source if modified Section 3 of the GPL requires you to redistribute GPLed source (or offer to make such source available when asked), even if you ship a binary of that GPLed program which has not been modified. However, if you configure your system so that section 3c applies, this becomes easier: c) Accompany it with the information you received as to the offer to distribute corresponding source code. (This alternative is allowed only for noncommercial distribution and only if you received the program in object code or executable form with such an offer, in accord with Subsection b above.) - swap out references to freebsd support list in the distro so our customers don't spam the community You should have your own top-level documentation which refers people to your support mechanisms, sure. - honor the redistribution rules of the ports Yes, you need to pay attention to the licenses of all dependencies. - should make a donation to the project as profits allow If you like; no doubt it would be appreciated. Are there any FreeBSD references that MUST be taken out / MUST be left in? What you see is what you get: the BSD license is very simple. Are there any other legal or technical issues? How do people on FreeBSD feel about commercial distributions generally? Are we going to get sued by SCO? (just kidding, sort of) There are lots of technical details-- while there is a fair amount of documentation available for building a release, and many steps are deterministic, it really is an iterative process that stops based on subjective criteria (yours). You're welcome to use BSD software in a commercial distribution. Have fun. If you contribute useful things back, that's nice, but you don't even have to do that much. IANAL: I'd worry more about falling in the shower and breaking my neck than I would worry about SCO. -- -Chuck ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Poor SCSI disk preformance
It should go faster than 5MB/sec, though. Seagate's specs say that drive should do 14MB/sec max. UW's top speed is 40MB/sec, so there shouldn't be any bottlenecks. 14MB/s is the maximum internal transfer rate. Also, we're talking about write performance here, which will likely be quite a bit slower than read performance. As I said before, a more realistic number should be had with rawio or by measuring actual real-world transfers. Unless all you do is write zeros with dd all day long, I don't think that that is the best measure of performance. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Abit KD7-A KT400A
Subhro wrote: Don't worry, Go ahead with the install. IT will work Regards Subhro Subhro Sankha Kar Indian Institute of Information Technology Block AQ-13/1, Sector V Salt Lake City PIN 700091 India -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of karbassa Sent: Monday, January 05, 2004 11:53 PM To: [EMAIL PROTECTED] Subject: Abit KD7-A KT400A Dear All; Has any body running FreeBsd 4.XX on Abit KD7-A KT400A motherboard?? The above motherboard has the following specification: Abit KD7-A KT400A USB2+ LAN + 6CH. It also uses the VIA KT400A / VT8235CE chipset. I know FreeBSD supports 8235 chipset, but I have not seen any thing about the 8235CE chipset. According to via web site, the 8235CE is an enhanced version of 8235 chipset, and looks as there is hardly any difference between the above chipset. So any of you gus has any expricence with the above motherboard I would like to hear from you. Kind Regards P.S Since I am not part of the [EMAIL PROTECTED], I would be grateful if you could send a reply to my email address. My Email Address: [EMAIL PROTECTED] _ The information in this email is confidential. It is intended solely for the addressee. Access to this email by anyone else is unauthorised. If you are not the intended recipient, any disclosure, copying, or distribution is prohibited and may be unlawful. If you have received this email in error please delete it immediately and contact [EMAIL PROTECTED] _ This e-mail has been scanned for all viruses by Star Internet. The service is powered by MessageLabs. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] This e-mail has been scanned for all viruses by Star Internet. The service is powered by MessageLabs. Dear Subhro, Any I dea if Sound and Lan chipsets are detected and working under FreeBsd ??? if the answer is yes, could you be kind enough to let me know, how did you manage to configure them. Kind Regards Abbas P.S Since I am not part of the [EMAIL PROTECTED], I would be grateful if you could send a reply to my email address. My Email Address: [EMAIL PROTECTED] _ The information in this email is confidential. It is intended solely for the addressee. Access to this email by anyone else is unauthorised. If you are not the intended recipient, any disclosure, copying, or distribution is prohibited and may be unlawful. If you have received this email in error please delete it immediately and contact [EMAIL PROTECTED] _ This e-mail has been scanned for all viruses by Star Internet. The service is powered by MessageLabs. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
growfs problem [was Re: Adding a drive in vinum]
Ok, I could not wait, so I did : a create with : drive vinumdrive1 device /dev/ad3e sd name data.p0.s1 drive vinumdrive1 len 0 then : attach data.p0.s1 data.p0 That worked well, I had a 115GB volume, I now have a 301GB one, I'm happy :) Now, growfs, so, I launch it : # growfs -N /dev/vinum/data new file systemsize is: 78997019 frags Warning: 4312 sector(s) cannot be allocated. growfs: 308580.0MB (631971840 sectors) block size 32768, fragment size 4096 using 417 cylinder groups of 740.00MB, 23680 blks, 47360 inodes. with soft updates then, the superblocks backup. And then, I do : # growfs /dev/vinum/data We strongly recommend you to make a backup before growing the Filesystem Did you backup your data (Yes/No) ? Yes new file systemsize is: 78997019 frags growfs: wtfs: write error: 631976157: Inappropriate ioctl for device And well, it does not work that good... Any hints ? -- Mathieu Arnold pgp0.pgp Description: PGP signature
Re: Poor SCSI disk preformance
I wouldn't say that dd is the greatest benchmarking tool. You may want to try benchmarks/rawio. I'll check that out just for kicks, but I _actually want_ to write zeros to the drive first, not just as a benchmark. The reasoning for this is that I'm trying to create a dedicated box to format HDDs in parallel. I wish to first zero the drives to make data recovery without an electron microscope difficult. Then, to test for bad sectors I do a checksum of the number of zero bytes written to disk, and then I read back from the disk and compare checksums. Not exactly an extensive test, and perhaps there is a verify option or trick in dd that I'm not aware of. I think that this would catch any blatantly bad drives... If not, there are 2 full disk operations that should be going faster. Actually, just for kicks: # dd if=/dev/da0 of=/dev/null bs=128k [1] 1839 # iostat -K -w 1 da0 tty da0 cpu tin tout KB/t tps MB/s us ni sy in id 1 42 64.00 607 37.92 1 0 1 0 98 0 43 64.00 222 13.87 0 0 2 0 98 0 43 64.00 223 13.92 0 0 0 2 98 0 42 64.00 224 13.98 0 0 2 0 98 0 43 64.00 222 13.86 0 0 3 0 97 0 43 64.00 223 13.92 0 0 1 2 98 0 43 64.00 223 13.92 0 0 2 1 97 0 42 64.00 223 13.92 0 0 3 0 97 0 43 64.00 223 13.92 0 0 1 0 99 Seems to give me the performance that I expect... Also, try monitoring diffferent types of transfers to and from another physical disk with iostat. Actually, interestingly enough, when I copy a file, or do a newfs_msdos I only get 0.06-0.89MB/s transfers, which is what first tipped me off to the problems... Obviously less acceptable... ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Commercial Distribution?
On Tue, Jan 06, 2004 at 05:22:55PM +0100, Udo Schr?ter (Trionic Technologies) wrote: Are there any FreeBSD references that MUST be taken out / MUST be left in? Well, you don't have to, but I would really appreciate it if you made sure that send-pr was either removed or changed to submit bugs to yourselves. You've probably already thought of this, but I wanted to mention it, just in case. Thanks, Ceri (FreeBSD bugmeister) -- pgp0.pgp Description: PGP signature
Re: ps: warning: /var/run/dev.db: No such file or directory
On Tue, Jan 06, 2004 at 04:10:31PM +0100, David Landgren wrote: I recently rebooted a server that had been running for many months. I haven't touched the kernel or userland programs since it went into production. The server was rebooted with 'shutdown -h now', powered down, and then later restarted. I've since noticed that cron didn't restart, which is odd, but fixable, but more importantly, when I run ps, it spits out 'ps: warning: /var/run/dev.db: No such file or directory' (although, as far as I can tell, the output is perfectly reasonable). I'm wondering if one is a symptom of the other. In any event, /var/run/dev.db is most certainly not there. You don't need to reboot - just run dev_mkdb. ceri -- pgp0.pgp Description: PGP signature
wicontrol output
can anyone help with this please - it's very frustrating. what does the Channel list value mean? thanks Matt ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: why does inetd default to enable
On Tue, 6 Jan 2004 12:57:12 -0500 fbsd_user [EMAIL PROTECTED] wrote: The 4.9 /etc/defaults/rc.conf file has inetd_enable=YES Why is that? That's normal behaviour. Inetd is active, but nothing is enabled by default. During the sysinstall I answered NO to inetd question. You answered no to a question asking you if you wanted to customize inetd's behaviour, not if ou wanted to enable it. Is this not an error? nope. Cheers -- Stucchi Massimiliano | Gruppo Utenti FreeBSD Italia WillyStudios.com | http://www.gufi.org [EMAIL PROTECTED] | [EMAIL PROTECTED] People who make no mistakes do not usually make anything pgp0.pgp Description: PGP signature
RE: why does inetd default to enable
Well it does not. So this is an error which should have PR submitted? -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Dan Nelson Sent: Tuesday, January 06, 2004 1:02 PM To: fbsd_user Cc: [EMAIL PROTECTED] ORG Subject: Re: why does inetd default to enable In the last episode (Jan 06), fbsd_user said: The 4.9 /etc/defaults/rc.conf file has inetd_enable=YES Why is that? During the sysinstall I answered NO to inetd question. Is this not an error? sysinstall should have created an /etc/rc.conf with inetd_enable=NO in it, to override the default. -- Dan Nelson [EMAIL PROTECTED] ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Cannot find file system superblock error - how to recover?
On Tue, 6 Jan 2004 09:48:40 -0800 (PST) Scott I. Remick [EMAIL PROTECTED] probably wrote: --- Sergey 'DoubleF' Zaharchenko [EMAIL PROTECTED] wrote: I can't find a zero-bad floppy in this place! It's all the holidays! That's what AOL disks (vs. discs) used to be good for. :) With `c', they're all offset by 63(why?). But still, you can mount the partitions on the ad4s1, so the disklabel should be ok... Yeah. Starts to suggest what we were thinking was a evidence related to the problem is really unrelated and normal behavior (is disklabel/bsdlabel only meant to be run on slices and not bsd-partitions?). Are we looking in the wrong place? After trying out 5.2-RC2, it seems like the offsets reported with the `c' slice are from the beginning of the disk, not from the beginning of the slice. That accounts for the +63 difference. I guess it's documented somewhere, but as I don't use 5.x I haven't read its docs. What about that potentially good superblock we found a while ago? (the skip 16 one that contained /data in it) Should we be saving that somewhere while we can? (how?) I think you already have a copy (the data at offset 32 seems to be it). If you want, do a # dd if=/dev/ad6s1 skip=16 count=16 of=/some/file Please tell me everything what you tried to use to mount/fsck the drive (and the results, of course). Anyone out there know 5.x file-system dirtiness like the back of their hand? C'mon, you know you wanna join the fun. :) Try booting from a 4.x floppy and doing it all over again... The FS is UFS1, isn't it? -- DoubleF Why does New Jersey have more toxic waste dumps and California have more lawyers? New Jersey had first choice. pgp0.pgp Description: PGP signature
hard time with routing
Well, I have this problem again, I hope I get help at this time, not big problem, its just something I'm missing here. interface to net: ep0 interface to lan: xl0 ep0 has 2001:a68:2:10::2/64 with default gw 2001:a68:2:10:: and she works fine. xl0 should have 2001:a68:2:10:dead::/96 ifconfig ep0 inet6 2001:a68:2:10::2/64 route add -inet6 default 2001:a68:2:10:: fine. ipv6 works now, then: ifconfig xl0 inet6 2001:a68:2:10:dead::/96 and situation is like this(ping -S 2001:a68:2:10:dead::) : --- 2001:a68:2:10::2 ping6 statistics --- 3 packets transmitted, 3 packets received, 0% packet loss round-trip min/avg/max/std-dev = 0.317/0.367/0.462/0.067 ms --- 2001:a68:2:10:: ping6 statistics --- 2 packets transmitted, 0 packets received, 100% packet loss lan interface can ping to internet interface but no gw? ip and ip6 forward bits are 1. How I should route that 96-block so it would work? Greets Markus Kovero ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
RE: why does inetd default to enable
That may be the normal behavior, but it's wrong. Why run the inetd daemon consuming resources when all the optional servers it can launch are commented out in inetd.conf? If not selected in sysinstall inetd should not start. The statement in /etc/defaults/rc.conf should be changed to enable=NO Then it would be correct. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Massimiliano Stucchi Sent: Tuesday, January 06, 2004 1:32 PM To: [EMAIL PROTECTED] Subject: Re: why does inetd default to enable On Tue, 6 Jan 2004 12:57:12 -0500 fbsd_user [EMAIL PROTECTED] wrote: The 4.9 /etc/defaults/rc.conf file has inetd_enable=YES Why is that? That's normal behaviour. Inetd is active, but nothing is enabled by default. During the sysinstall I answered NO to inetd question. You answered no to a question asking you if you wanted to customize inetd's behaviour, not if ou wanted to enable it. Is this not an error? nope. Cheers -- Stucchi Massimiliano | Gruppo Utenti FreeBSD Italia WillyStudios.com | http://www.gufi.org [EMAIL PROTECTED] | [EMAIL PROTECTED] People who make no mistakes do not usually make anything ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Cannot find file system superblock error - how to recover?
--- Sergey 'DoubleF' Zaharchenko [EMAIL PROTECTED] wrote: I can't find a zero-bad floppy in this place! It's all the holidays! That's what AOL disks (vs. discs) used to be good for. :) With `c', they're all offset by 63(why?). But still, you can mount the partitions on the ad4s1, so the disklabel should be ok... Yeah. Starts to suggest what we were thinking was a evidence related to the problem is really unrelated and normal behavior (is disklabel/bsdlabel only meant to be run on slices and not bsd-partitions?). Sorry, I haven't been following this whole thread and so am not responding to your real problem/question. But, just in regards to this fragment: You have it backwards in this question. Disklabel is meant to run only on bsd partitions and not slices. Slices (1-4) are the major divisions of the disk and partitions (a-h) are divisions within slices. Fdisk is what creates slices. jerry Are we looking in the wrong place? What about that potentially good superblock we found a while ago? (the skip 16 one that contained /data in it) Should we be saving that somewhere while we can? (how?) Anyone out there know 5.x file-system dirtiness like the back of their hand? C'mon, you know you wanna join the fun. :) Where's my time machine so I can go back and back up this drive... ah well I'm learning a ton. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Commercial Distribution?
You're creating a turnkey system with a known and well-defined layout which includes all of the dependencies to run your proprietary software. Look into man release, which discusses how to customize a build and create CD images. Yes, I already made a few builds. We're currently (mainly) looking into how we can make the installer more friendly for corporate helpdesks/IT personnel and how to customize KDE so users won't complain about this not being Windows so much ;) You should also consider managing your software and it's dependencies as a port, even though you might never submit the port of your software. On the other hand, some people like anti-virus vendors have their commercial products available as a port on a time-limited trial basis (security/vscan, , but that's up to you... Yes, I'm planning to make two packages. One to install all the modifications and preferences to applications that don't need to be recompiled (this patch would be applied after install). The other package would contain the actual proprietary client software. We discussed the trial idea last year - maybe we will distribute the client and trial users can connect to a public test serever - we haven't decided yet (however, it is not a consumer product). You're welcome to use BSD software in a commercial distribution. Have fun. If you contribute useful things back, that's nice, but you don't even have to do that much. Great, we had many idea for little tools and stuff like that (if only a day had 50+ hours!) Btw, I looked really carefully and couldn't find any FreeBSD-based commercial distro (if you don't count OS X). Am I just to stupid to find one or is this an idea whose time has not come yet? IANAL: I'd worry more about falling in the shower and breaking my neck than I would worry about SCO. Yeah, sometimes I just wish some SCO people would do the shower-neck-breaking thing. ;) Well, you don't have to, but I would really appreciate it if you made sure that send-pr was either removed or changed to submit bugs to yourselves. You've probably already thought of this, but I wanted to mention it, just in case. Yes, we thought of that. I just hope we don't overlook anything obvious! But on the other hand, our customers even call *us* when their Windows breaks, so you're probably not in danger anyway... Thanks a lot for the advice, that was really quick! I'll keep in touch and tell you how the project went, OK? ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Weird stuff after moving to a new MB
Hello everyone, I'm hoping that someone might be able to give me some ideas on what to check to rule out a flakey MB. I had FreeBSD 5.1 installed on an older Dual 440BX motherboard which was current with CVS. I replaced the board with a 440GX dual. Basically, I took the HD out of the old system and put into the new since the boards are pretty similar.The system is working but there seems to be some quirks such as the Onboard NIC will not pick up a connection( IT is recognized by the System and uses the same driver (FXP)) and the floppy drive will not read a floppy at anytime (At boot too). I've rebuilt world and kernel and still have the same problems. I'm also noticing now that after reconfiguring X, my mouse is chunky. To be honest, it's chunky in the mouse setup in /stand/sysinstall too. I'm leaning towards a flakey board but have to admit my naivity in that it may be due to not reinstalling from CD. Suggestions, comments? __ Do you Yahoo!? Yahoo! Hotjobs: Enter the Signing Bonus Sweepstakes http://hotjobs.sweepstakes.yahoo.com/signingbonus ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
apache+php
GASPOFWIPV6LAB# uname -a FreeBSD GASPOFWIPV6LAB 4.9-RELEASE FreeBSD 4.9-RELEASE #0: Thu Jan 1 08:04:10 CET 2004 [EMAIL PROTECTED]:/usr/src/sys/compile/GASPO i386 i have install from pkg_add the packages: apache-1.3.28 mysql-client-4.0.15 PHP ---error-- when i do : apachectl start usr/local/sbin/apachectl start: httpd could not be started -- so,i have test also to compile httpd on my fbsd from apache.org, and if i compile it without modules apache start,if i compile with all modules like php cgi,apache cannot be start,the only error is:(var log) [Tue Jan 6 20:25:56 2004] [alert] mod_unique_id: unable to gethostbyname(GASPOFWIPV6LAB) any suggest? ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: What should I install?
On Monday 05 January 2004 11:34 pm, Teilhard Knight wrote: I have running FreeBSD 4.7 in one computer and version 5.0 was not for newbies. I see now, version 4.9 is out, but version 5.1 is too. In the official FreeBSD web page, they recommend to install 5.1. Now, I haven't grown up from the newbie category, so the question is: Should I install 5.2 or 4.9, perhaps 4.8, in another computer? Teilhard Knight The Extraterrestrial Change privacy for softhome if you want to intrude my inbox I would recommend you download and install 5.1 if you can. The upgrade from 4.x to 5.x is nearly impossible and you're better off doing a fresh install. I've been using 5.x for quite a while now, even on a production web server with little problems. There's also better hardware support. Expect to see a few bugs, but they're getting taken care of pretty quickly. Thanks a lot. A few months ago, in the times of 4.7, everybody was against newbies to install 5.0. I see you guys have tested and approved version 5.x. I'll start downloading 5.1 right away. Teilhard Knight The Extraterrestrial Change privacy for softhome if you want to intrude my inbox ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Updating Ports Index
I installed perl, so I'm no longer getting the 'perl: not found' message (any reason why perl isn't installed when installing the ports tree??) The problem now is that the 'make index' command seems to take forever: idfubar# make index Generating INDEX-5 - please wait.. And then there's no additional output. Is the server working on the request, or has the request hung? -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Rishi Chopra Sent: Monday, January 05, 2004 5:23 PM To: [EMAIL PROTECTED] Subject: Updating Ports Index For some reason, I can't seem to update the index for the ports database: idfubar# cd /usr/ports idfubar# make index Generating INDEX-5 - please wait..perl: not found perl: not found Done. I also tried attempting my first 'portsdb -Uu' after a successful CVSUp, but am running into some problems: idfubar# portsdb -Uu Updating the ports index ... perl: not found /usr/local/sbin/make_describe_pass2:70:in `write': Broken pipe (Errno::EPIPE) from /usr/local/sbin/make_describe_pass2:70:in `puts' from /usr/local/sbin/make_describe_pass2:70 failed to generate INDEX! portsdb: index generation error Can anyone explain why I might be getting these errors? My installation was a minimal install, do I need to install something else for the 'make index' command to work properly? -R ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Slow boot when not plugged into network
Does anybody know of a workaround for this? When I'm not connected to my ethernet network, it takes an extra 90 seconds to boot my FreeBSD laptop, as it hangs on this boot message before timing out: Doing initial network setup: hostname I'm guessing it has something to do with DNS lookup and can't reach the server(s), but I'm not sure. I had a similar problem in the past when I used Debian, but never really addressed it. For the most part, I can deal with it, but sometimes it is embarrassing, like when I'm doing a presentation or something and everybody is twiddling their thumbs while waiting for me. Thanks for any advice. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Cannot find file system superblock error - how to recover?
--- Sergey 'DoubleF' Zaharchenko [EMAIL PROTECTED] wrote: I think you already have a copy (the data at offset 32 seems to be it). If you want, do a # dd if=/dev/ad6s1 skip=16 count=16 of=/some/file ok, done. Is there a way to use fsck_ufs -b now to fix this? Or is that premature? And if I remember correctly, that doesn't actually APPLY the alternate superblock... it just allows fsck to run while utilizing an alternate one. So we need to use some sort of dd command to copy it to the proper location, correct? Please tell me everything what you tried to use to mount/fsck the drive (and the results, of course). Well, my memory is sketchy so I don't know how much use it'd be. But I was saving a file to /data (ad6) when the system hung. Then it rebooted on its own. Of course fsck ran on bootup but it gave up and told me I had to run it manually. When I did (I don't remember any parameters I specifically used, if any) I got: /dev/ad6s1c Cannot find file system superblock /dev/ad6s1c: NOT LABELED AS A BSD FILE SYSTEM I remember there being some of the other common message for little things that you just tell it to go ahead and fix. But the above error was a brick wall and would keep me from going multi-user. Ultimately I had to comment-out the line in fstab: #/dev/ad6s1c/data ufs rw 2 2 So I could at least boot. And that's the way I've been ever since. Trying to mount it now gives: su-2.05b# mount -r /dev/ad6s1c /data mount: /dev/ad6s1c on /data: incorrect super block And so we stand. Try booting from a 4.x floppy and doing it all over again... The FS is UFS1, isn't it? Ummm... doing what all over again? Wipe the disk and redo the partitions? I hope we're not quite there yet. How does using 4.x give me an advantage over 5.1? I'm not clear on that part. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: apache+php
[EMAIL PROTECTED] wrote: GASPOFWIPV6LAB# uname -a FreeBSD GASPOFWIPV6LAB 4.9-RELEASE FreeBSD 4.9-RELEASE #0: Thu Jan 1 08:04:10 CET 2004 [EMAIL PROTECTED]:/usr/src/sys/compile/GASPO i386 i have install from pkg_add the packages: apache-1.3.28 mysql-client-4.0.15 PHP ---error-- when i do : apachectl start usr/local/sbin/apachectl start: httpd could not be started -- so,i have test also to compile httpd on my fbsd from apache.org, and if i compile it without modules apache start,if i compile with all modules like php cgi,apache cannot be start,the only error is:(var log) [Tue Jan 6 20:25:56 2004] [alert] mod_unique_id: unable to gethostbyname(GASPOFWIPV6LAB) any suggest? Well, that is a DNS type issue. Give your host a name either in DNS or /etc/resolv.conf, and try again. Or, disable mod_unique_id. I would hesitate in saying that this will fix your problem, though; that's just an alert. Perhaps something else is wrong as well. I generally prefer to install apache/PHP/MySQL from the ports tree, SQL first, PHP last. Works pretty well; haven't had many issues since I started doing it that way. HTH, Kevin Kinsey ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Poor SCSI disk preformance
In the last episode (Jan 06), Derek Marcotte said: Actually, just for kicks: # dd if=/dev/da0 of=/dev/null bs=128k [1] 1839 # iostat -K -w 1 da0 tty da0 cpu tin tout KB/t tps MB/s us ni sy in id 1 42 64.00 607 37.92 1 0 1 0 98 0 43 64.00 222 13.87 0 0 2 0 98 0 43 64.00 223 13.92 0 0 0 2 98 0 42 64.00 224 13.98 0 0 2 0 98 0 43 64.00 222 13.86 0 0 3 0 97 0 43 64.00 223 13.92 0 0 1 2 98 0 43 64.00 223 13.92 0 0 2 1 97 0 42 64.00 223 13.92 0 0 3 0 97 0 43 64.00 223 13.92 0 0 1 0 99 Seems to give me the performance that I expect... Aha. Check the WCE bit to see if your write cache is enabled on the disk: # camcontrol mode da0 -m 8 | grep WCE If it's not set, that could be contributing to the speed difference between reads and writes. Set it by running cmcontrol mode da0 -m 8 -e -P 2, and set WCE: 1. -- Dan Nelson [EMAIL PROTECTED] ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Updating Ports Index
On Tuesday 06 January 2004 1:33 pm, Rishi Chopra wrote: I installed perl, so I'm no longer getting the 'perl: not found' message (any reason why perl isn't installed when installing the ports tree??) Just because you installed the ports tree does not mean you installed Perl. If you did via the install. The problem now is that the 'make index' command seems to take forever: This does take time if on a slower box. -- Best regards, Chris ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: What should I install?
Teilhard Knight [EMAIL PROTECTED] writes: In the official FreeBSD web page, they recommend to install 5.1. Depending on your application. Remember the caveats: http://www.freebsd.org/releases/5.1R/early-adopter.html Also bear in mind that 5.2 will be out within a few weeks. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Cannot find file system superblock error - how to recover?
--- Jerry McAllister [EMAIL PROTECTED] wrote: (is disklabel/bsdlabel only meant to be run on slices and not bsd-partitions?). You have it backwards in this question. Disklabel is meant to run only on bsd partitions and not slices. Slices (1-4) are the major divisions of the disk and partitions (a-h) are divisions within slices. Fdisk is what creates slices. Ok, well the reason I thought it might be the other way is because if you run disklabel (bsdlabel) on a slice (such as /dev/ad4s1 on my machine, which is working, or /dev/ad0s1 on another machine I have access to) it works fine (and reports an offset of 0), but if you run it on the partition (/dev/ad0s1c) you get an offset of 63 and errors like: partition c: partition extends past end of unit bsdlabel: partition c doesn't start at 0! bsdlabel: An incorrect partition c may cause problems for standard system utilities partition f: partition extends past end of unit So why does disklabel/bsdlabel produce errors when run on the partition even when the disk is fine, if it is meant to be run on partitions and not slices? Trying to learn... thanks! ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Poor SCSI disk preformance [more on camcontrol please!]
Aha. Check the WCE bit to see if your write cache is enabled on the disk Bingo: # dd if=/dev/zero of=/dev/da0 bs=64k [1] 2253 # iostat -K -w 1 da0 tty da0 cpu tin tout KB/t tps MB/s us ni sy in id 2 38 0.00 0 0.00 1 0 1 0 98 0 43 64.00 223 13.91 0 0 8 1 91 0 43 64.00 223 13.92 0 0 5 0 95 0 43 64.00 223 13.92 0 0 8 1 91 0 43 64.00 223 13.92 0 0 6 0 94 0 42 64.00 223 13.92 0 0 5 1 94 0 43 64.00 223 13.92 1 0 6 1 92 Set it by running cmcontrol mode da0 -m 8 -e -P 2, and set WCE: 1 I needed to modify your command slightly to: camcontrol mode da0 -m 8 -e -P 0 I guess I don't have a page 2 for some reason... This will probably cause this bit to be reset on reboot as well, because it is the current page? Is it prudent to attempt to set the WCE:1 on all drives that get attached? I will be formatting a large number of greatly varying drives, including ATA converted to SCSI type drives, and really old, and really new drive types. I've had a look at man camcontrol earlier, but I don't know enough about the inner workings of SCSI for this to mean much to me. It seems to be pretty obscure (like how would I know to enable features/specs to edit a modepage?), but extremely powerful. Where can I read more about this, is there a good camcontrol FAQ/tutorial out there that explains what these details actually mean/do? Thanks for the help! Derek ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: how to use lseek() system call with over 2G files?
Dan Nelson [EMAIL PROTECTED] writes: In the last episode (Jan 06), Alex said: Hi everybody! Some time ago there wasn't any possibility to create disk file larger than 2G and there was no problem with lseek(). Some time ago meaning around 1997? FreeBSD has had 64-bit file access since at least 2.2.0. I don't remember if earlier versions had support for it or not. off_t has *never* been anything but 64-bit in FreeBSD. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Cannot find file system superblock error - how to recover?
--- Jerry McAllister [EMAIL PROTECTED] wrote: (is disklabel/bsdlabel only meant to be run on slices and not bsd-partitions?). You have it backwards in this question. Disklabel is meant to run only on bsd partitions and not slices. Slices (1-4) are the major divisions of the disk and partitions (a-h) are divisions within slices. Fdisk is what creates slices. First, as I look at what I wrote, I said this wrong in two ways - because I didn't read carefully and had just come off a bad headache, probably caused by breathing spray paint fumes - always use in well ventilated area. The biggie!! disklabel DOES work on slices and CREATES partitions. It does not work on partitions - it creates them which is where my sleepy [Groggy has already been claimed by a famous contributer] got lost. So, trying to run disklabel on ad0s1c would definitely cause an error. The other thing is, I should have left out the word 'only' (after writing the rest of it correctly, of course) because disklabel can, but usually shouldn't, be run on the whole disk ad0 (as apposed to just a slice ad0s1) which will create a dangerously dedicated disk. There is no real danger as long as you only use FreeBSD on it and don't want to multi-boot it or anything. Since you only lose the tiny bit by slicing it (63 sectors), you should just always first slice it (with fdisk) - even if that means making it all one big slice. That will make sure things are happy should you get weird creative ideas later on. Ok, well the reason I thought it might be the other way is because if you run disklabel (bsdlabel) on a slice (such as /dev/ad4s1 on my machine, which is working, or /dev/ad0s1 on another machine I have access to) it works fine (and reports an offset of 0), but if you run it on the partition (/dev/ad0s1c) you get an offset of 63 and errors like: Yes, the offset in disklabel is from the beginning of the slice. I am not sure what it is trying to do if you try to further partition a partition. Anyway, the 'c' partition is a special one that refers to the whole slice regardless of the partitions it has been carved in to. I would have to go wading through code to figure out how it is handled differently. Just for fun, try doing a disklabel on ad0s1a or something like that and see what it does - on a disk you can afford to trash. Anyway, sorry for the first round of mis-statement. jerry partition c: partition extends past end of unit bsdlabel: partition c doesn't start at 0! bsdlabel: An incorrect partition c may cause problems for standard system utilities partition f: partition extends past end of unit So why does disklabel/bsdlabel produce errors when run on the partition even when the disk is fine, if it is meant to be run on partitions and not slices? Trying to learn... thanks! ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Commercial Distribution?
Udo Schrter (Trionic Technologies) wrote: [ ... ] Btw, I looked really carefully and couldn't find any FreeBSD-based commercial distro (if you don't count OS X). Am I just to stupid to find one or is this an idea whose time has not come yet? Wind River Systems and other vendors will sell FreeBSD CDs, and there are examples of dedicated systems using FreeBSD that come to mind, such as the Nokia IP firewall platform. Or were you talking about a commercial distro in terms of a company that provides/charges for technical support...? :-) -- -Chuck ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Two unrelated questions
Scott Miller [EMAIL PROTECTED] writes: 1) Does the 5.x branch of freebsd support 32 bit cardbus? or will it be added to 4.x soon? Yes in 5.x, no in 4.x. 2) I have installed freebsd 4.9 on my Dell Inspiron 8100 laptop, when I try to configure XFree86 I have to use the text based tool. After doing that, when I run startx I get a grainy desktop that almost covers my screen, but not quite, and has only a clock window, a login window, and an xterm window, and nothing else. Where am I going wrong? That's twm. [I like it.] If you want a different window manager, install a different window manager. The FreeBSD Handbook goes into great detail on this. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Slow boot when not plugged into network
Duane Winner wrote: Does anybody know of a workaround for this? When I'm not connected to my ethernet network, it takes an extra 90 seconds to boot my FreeBSD laptop, as it hangs on this boot message before timing out: Doing initial network setup: hostname I'm guessing it has something to do with DNS lookup and can't reach the server(s), but I'm not sure. My best guess is indeed also a DNS lookup which goes into nothingness ;-) You should be able to avoid the DNS query if you have the hostname it is trying to lookup (such as your FQDN) in your /etc/hosts file. HTH HAND, -- Simple guidelines to happiness: Work like you don't need the money, love like your heart has never been broken and dance like no one can see you. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Commercial Distribution?
Wind River Systems and other vendors will sell FreeBSD CDs, and there are examples of dedicated systems using FreeBSD that come to mind, such as the Nokia IP firewall platform. Or were you talking about a commercial distro in terms of a company that provides/charges for technical support...? :-) Yes, something like that. I guess so far it has been done only with Linux-based systems, eh? I couldn't find any RedHat-like vendors out there. Anyway, it was just a dumb newbie question for better insight as to what's out there... ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Slow boot when not plugged into network
On Tue, 6 Jan 2004, Duane Winner wrote: Does anybody know of a workaround for this? When I'm not connected to my ethernet network, it takes an extra 90 seconds to boot my FreeBSD laptop, as it hangs on this boot message before timing out: Doing initial network setup: hostname I'm guessing it has something to do with DNS lookup and can't reach the server(s), but I'm not sure. Hi! Will most likely be the dhcp request, which of course does not find any dhcp server. When you are sitting at the console, simply press CTRL-C after Doing initial network setup: hostname ist displayed and the box is sitting there. The process dhclient will then be terminated and the boot process continues. HTH Olaf -- Olaf Hoyer[EMAIL PROTECTED] Fuerchterliche Erlebniss geben zu raten, ob der, welcher sie erlebt, nicht etwas Fuerchterliches ist. (Nietzsche, Jenseits von Gut und Boese) ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Poor SCSI disk preformance [more on camcontrol please!]
In the last episode (Jan 06), Derek Marcotte said: Aha. Check the WCE bit to see if your write cache is enabled on the disk Bingo: # dd if=/dev/zero of=/dev/da0 bs=64k # iostat -K -w 1 da0 tty da0 cpu tin tout KB/t tps MB/s us ni sy in id 0 43 64.00 223 13.92 1 0 6 1 92 I guess I don't have a page 2 for some reason... This will probably cause this bit to be reset on reboot as well, because it is the current page? Possibly. Power the drive off and see if the change sticks. :) Is it prudent to attempt to set the WCE:1 on all drives that get attached? I will be formatting a large number of greatly varying drives, including ATA converted to SCSI type drives, and really old, and really new drive types. I've never seen WCE hurt sequential write access, so it's probably safe to turn on. If you're paranoid about possibly getting damaged filesystems during power outages, you might want to turn it back off, although every year or so there's a thread that pops up debating its merits. I've had a look at man camcontrol earlier, but I don't know enough about the inner workings of SCSI for this to mean much to me. It seems to be pretty obscure (like how would I know to enable features/specs to edit a modepage?), but extremely powerful. Where can I read more about this, is there a good camcontrol FAQ/tutorial out there that explains what these details actually mean/do? Everything under camcontrol modepage and cmd is pretty much straight from the SCSI spec. You can buy copies of it from ANSI (I think you can download draft copies from www.t10.org somewhere), and sometimes disk vendors will ship copies with vendor-specific info. About 15 years ago, I bought a Maxtor disk that didn't include the little sheet saying which jumpers were which SCSI id. I called up and asked them to send me a copy, and they sent me the whole reference manual for the drive, detailing every SCSI command and modepage. -- Dan Nelson [EMAIL PROTECTED] ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: growfs problem [was Re: Adding a drive in vinum]
+-Le 06/01/2004 19:18 +0100, Mathieu Arnold écrivait : | Ok, I could not wait, so I did : | a create with : | drive vinumdrive1 device /dev/ad3e | sd name data.p0.s1 drive vinumdrive1 len 0 | | then : | attach data.p0.s1 data.p0 | | That worked well, I had a 115GB volume, I now have a 301GB one, I'm happy | :) | | Now, growfs, so, I launch it : | |# growfs -N /dev/vinum/data | new file systemsize is: 78997019 frags | Warning: 4312 sector(s) cannot be allocated. | growfs: 308580.0MB (631971840 sectors) block size 32768, fragment size | 4096 using 417 cylinder groups of 740.00MB, 23680 blks, 47360 | inodes. with soft updates | then, the superblocks backup. | | And then, I do : |# growfs /dev/vinum/data | We strongly recommend you to make a backup before growing the Filesystem | | Did you backup your data (Yes/No) ? Yes | new file systemsize is: 78997019 frags | growfs: wtfs: write error: 631976157: Inappropriate ioctl for device | | And well, it does not work that good... | Any hints ? Ok, no matter what I do, I can't grow this filesystem. I'm wondering if there's a bug somewhere in growfs or if it's because of vinum or... -- Mathieu Arnold pgp0.pgp Description: PGP signature
Problem with amd (automount daemon)
I've got a problem with amd. This is the error I get when I access my CD-ROM drive at /mnt/cdrom/: /host/localhost/cdrom: mount (amfs_auto_cont): Operation not permitted I've followed the instructions for configuring automounting on FreeBSD, as I found it on the Daemonnews site. Any hints as to what this error may indicate? Here's some more information on the pertaining system: FreeBSD 4.9-STABLE Dual P3-450 (but currently with UP kernel) My /etc/amd.map file: http://people.freebsd.org/~znerd/amd.map Output of dmesg -a: http://people.freebsd.org/~znerd/dmesg.out Ernst ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
switching from sendmail to postfix
Hello all, Im running an FreeBSD 4.9 System and from scratch is an sendmail MTA installed and active. I would use postfix as my MTA. How should I switch to postfix at best? Has someone a suggestion? Thank you! Greetings from Stuttgart, Germany Markus -- Markus Espenhain Fon: +49 (7 11) 48 90 83 - 0 ETES - EDV-Systemhaus GbRFax: +49 (7 11) 48 90 83 - 50 Libanonstrasse 58 A * D-70184 Stuttgart Web: http://www.etes.de ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]