Avoid questions from portupgrade?

2004-01-29 Thread Kai Grossjohann
I started a portupgrade -avR yesterday. It stopped in the middle of the night, after getting to GhostScript. GhostScript asks me which drivers to compile. Is there a way, preferrably in /etc/make.conf, that I can tell it beforehand which drivers I want, so that GhostScript won't ask? Is there

smtp and several freebsd servers

2004-01-29 Thread Christer Solskogen
hi! I have to servers running freebsd, and i wonder how i can get them to use the same smtp server when sending out f.ex cron messages and such. Do i have to run smtp on both, or can i configure one server to use the other machine? -- Med vennlig hilsen / Best regards Christer Solskogen

Re: ERROR: BOOTDIR environment variable

2004-01-29 Thread Matthew Seaman
On Thu, Jan 29, 2004 at 03:21:32PM +0900, Rommel B. Ikeda wrote: I am trying to install Java from my /usr/ports/java/jdk13 ports. The error message below came out and I do not know to do with it. ERROR: Your BOOTDIR environment variable does not point to a valid Java 2 SDK for

Re: Avoid questions from portupgrade?

2004-01-29 Thread Matthew Seaman
On Thu, Jan 29, 2004 at 08:13:56AM +0100, Kai Grossjohann wrote: I started a portupgrade -avR yesterday. It stopped in the middle of the night, after getting to GhostScript. GhostScript asks me which drivers to compile. Is there a way, preferrably in /etc/make.conf, that I can tell it

Re: chrooting sshd for sftp

2004-01-29 Thread Mark Phillips
On Wednesday 28 January 2004 9:01 pm, Hiren wrote: Hi Hiren, i currently have users using sftp i wanted to know how to chroot sshd since i wanted the users to see only what is in there home dir's. If you only want them to be able to scp and not have a shell, try taking a look at scponly.

Retired Linux user wants to switch

2004-01-29 Thread Mike Machuidel
I've been using Linux for about 7 years. At the beginning the Linux community was still very small and very little people ever heard about it or even knew what is was. Many people called me crazy/stupid/dumb because I wasn't using Windows and told me I would never find a job as a programmer. Now

Re: Avoid questions from portupgrade?

2004-01-29 Thread Kai Grossjohann
Matthew Seaman [EMAIL PROTECTED] writes: Only by experience, or by reading through the port's Makefile. You can switch off the interactive configuration by setting 'BATCH=yes' in make's argument list. Most of the ports that use interactive configuration will in any case turn off the

Re: Retired Linux user wants to switch

2004-01-29 Thread Peter Ulrich Kruppa
On Thu, 29 Jan 2004, Mike Machuidel wrote: I've been using Linux for about 7 years. At the beginning the Linux community was still very small and very little people ever heard about it or even knew what is was. Many people called me crazy/stupid/dumb because I wasn't using Windows and told

Lock order reversal

2004-01-29 Thread Piotr Gnyp
What is exactly lock order reversal? I`ve encountered something like this on my console: lock order reversal 1st 0xc720dce4 vm object (vm object) @ vm/swap_pager.c:1323 2nd 0xc06c01a0 swap_pager swhash (swap_pager swhash) @ vm/swap_pager.c:1838 3rd 0xc0c358c4 vm object (vm object) @

Re: Is there a HOW-TO for a network install of FreeBSD?

2004-01-29 Thread Stephen L Martin
Hello, Here are some slides to a talk a went to a while ago. http://www.chuug.org/talks/20030722/netboot.pdf -Stephen Hi- I have a server that currently has Redhat 7.3 on it, and I want to wipe the box and do a fresh install of FreeBSD 4.9. The only problem is that the box is at a

Re: Retired Linux user wants to switch

2004-01-29 Thread Matthew Seaman
On Thu, Jan 29, 2004 at 02:22:29AM -0800, Mike Machuidel wrote: It may sound weird, but because of what the Linux community has become I would like to try and switch some of my systems over to FreeBSD. First I have some questions about what to expect: You're welcome here, and I hope that

Re: Lock order reversal

2004-01-29 Thread Kris Kennaway
On Thu, Jan 29, 2004 at 12:23:26PM +0100, Piotr Gnyp wrote: What is exactly lock order reversal? I`ve encountered something like this on my console: lock order reversal 1st 0xc720dce4 vm object (vm object) @ vm/swap_pager.c:1323 2nd 0xc06c01a0 swap_pager swhash (swap_pager swhash) @

Possible? - Postfix + SASL + Rewrite Headers?

2004-01-29 Thread Adam
Hello all, Just a quick, but hopefully simple question that I can't find the answer to after about an hour of googling... Is it possible to rewrite the headers of an outbound messages through my postfix server if the user was authenticated w/ sasl? Just something along the lines of, X-Blah:

Re: Lock order reversal

2004-01-29 Thread Jan Grant
On Thu, 29 Jan 2004, Piotr Gnyp wrote: What is exactly lock order reversal? I`ve encountered something like this on my console: lock order reversal 1st 0xc720dce4 vm object (vm object) @ vm/swap_pager.c:1323 2nd 0xc06c01a0 swap_pager swhash (swap_pager swhash) @ vm/swap_pager.c:1838 3rd

Booting with 80 Gig hard drive

2004-01-29 Thread rk47
Hi FreeBSD'ers I have a problem with booting from FreeBSD 4.8/4.9 and 5.2, they all gave the same error. I have an 80Gig Seagate HD with a Pentium 4, Epox motherboard and Phoenix version 2.2 BIOS. When I install FreeBSD from CD it displays a warning stating that my disk Geometry of 155061/16/63

[RELENG_4] Sound problems

2004-01-29 Thread Norbert Koch
Hi! After a cvsup and molding of a new stable world on 2004-01-26 I no longer have sound on my machine (mplayer and cdcontrol). I haven't changed the kernel configuration, so I rule this possible reason out. The option is set as # Audio support device pcm device sbc dmesg

Raid0

2004-01-29 Thread Wayne Swart
Helo everyone I was trying to make a raid0 filesystem on freebsd 4.9-RELEASE, following all the steps exactly how they are in the handbook. using 3 scsi drives. I made the ccd device and everything... When i get to the part where you have to do: ccdconfig ccd0 32 0 /dev/da1 /dev/da2 /dev/da3 I

Mailfilter

2004-01-29 Thread Robert Storey
Dear All, For awhile now I've been using a Linux/Unix program called Mailfilter, and it is SUPERB. It has solved my problems with the continuous bombardment of Windows viruses that pour into my inbox. Unlike Procmail, Mailfilter deletes the garbage on the mail server, so you don't have to

Re: Active System Attack Alerts

2004-01-29 Thread Geir Svalland
On Thursday 29 January 2004 06.00, Saint Aardvark the Carpeted wrote: Geir Svalland disturbed my sleep to write: Shouldn't this been taken care of when I'm running Sendmail 8.12.10 ? Well, I would expect the fix to be still in .10, and for the message to be logged. Or am I missing

Re: Retired Linux user wants to switch

2004-01-29 Thread Cordula's Web
Does FreeBSD have something like SYSV modules (just asking, of course there's kill)? It depends what you're meaning with SYSV modules: 1. semaphores, shared memory, message queues: Yes. 2. STREAMS (see: Rago, SysV Network Programming): No. 3. binary compatiblity to SysV: Yes, but only

login

2004-01-29 Thread chuck
Hi, I have freebsd 4.8 and finley got it installed but I can't get past the login When I installed it it asked for a password and I did enter one but it never seems to work. I am running a HP Pavillion XE738. I reinstalled 4 times but can't get past the login? Can you help me

can't assign requested address nn7j

2004-01-29 Thread Dan
I have a alias on de2 of xxx.xxx.42.208 I can SSh to that address but can't ping it. I get can't assign requested address. Netmask is 255.255.255.248. Other port ping just fine XXX.XXX.41.1 on de2. Any help Dan ___ [EMAIL PROTECTED] mailing list

Can't assign requested address Help

2004-01-29 Thread Dan
have a alias on de2 of xxx.xxx.42.208 I can SSh to that address but can't ping it. I get can't assign requested address. Netmask is 255.255.255.248. Other port ping just fine XXX.XXX.41.1 on de2. Any help Dan ___ [EMAIL PROTECTED] mailing list

Re: locking a user into one directory

2004-01-29 Thread Lowell Gilbert
Gautam Gopalakrishnan [EMAIL PROTECTED] writes: On Wed, Jan 28, 2004 at 09:59:11PM -0500, Lowell Gilbert wrote: Dragoncrest [EMAIL PROTECTED] writes: I've seen this explained before, but I've never taken much interest in it as I never had a need for it. Well, it's starting to

Re: Can't assign requested address Help

2004-01-29 Thread jan . muenther
have a alias on de2 of xxx.xxx.42.208 I can SSh to that address but can't ping it. I get can't assign requested address. Netmask is 255.255.255.248. Other port ping just fine XXX.XXX.41.1 on de2. Any help Are both IP addresses on the same subnet? If so, you'll have to use 255.255.255.255

Re: Can't assign requested address Help

2004-01-29 Thread Lowell Gilbert
Dan [EMAIL PROTECTED] writes: have a alias on de2 of xxx.xxx.42.208 I can SSh to that address but can't ping it. From where? I get can't assign requested address. where do you see this? Netmask is 255.255.255.248. Other port ping just fine XXX.XXX.41.1 on de2. What other port?

Errors

2004-01-29 Thread Steve Gilli
I have just installed FreeBSD 4.6 and included linux compatibility. I then tried to install a linux program and received the following errors:error: failed error: failed dependencies: libc.so.6(GLIBC_2.2) is needed by TIVsm-API-5.2.0-0 libpthread.so.0(GLIBC_2.2) is needed by

Re: Booting with 80 Gig hard drive

2004-01-29 Thread Jorn Argelo
--- Forwarded message --- From: Jorn Argelo [EMAIL PROTECTED] To: rk47 [EMAIL PROTECTED] Subject: Re: Booting with 80 Gig hard drive Date: Thu, 29 Jan 2004 15:13:32 +0100 On Thu, 29 Jan 2004 14:37:39 +0200, rk47 [EMAIL PROTECTED] wrote: Hi FreeBSD'ers I have a problem with booting

Re: Advertisement Rates

2004-01-29 Thread Ceri Davies
On Fri, Jan 23, 2004 at 02:08:44PM -0600, TJ wrote: Webmaster, Could you please inform me of your advertisement prices to place a text link on freebsd.org. We don't sell advertising I'm afraid, but thanks for expressing an interest. Ceri -- pgp0.pgp Description: PGP signature

Re: Can't assign requested address Help

2004-01-29 Thread Dan
When I ping I get the error message from that box. Subnet mask is just the ip range I asigned to the ips 42.208 to 42.215 Dan - Original Message - From: Lowell Gilbert [EMAIL PROTECTED] To: Dan [EMAIL PROTECTED] Cc: [EMAIL PROTECTED] Sent: Thursday, January 29, 2004 13:49 Subject: Re:

use \000 in sed

2004-01-29 Thread Zhang Weiwu
Hello. I wish to see all the files in some pathes in a string. Say, I wish to list all files in $PATH and manpath(1) What I can think of is to use #manpath | sed s/:/ /g |xargs ls (This is useful when auto-completing man command in a shell, say, csh). This works, but the command is wrong when

Re: Upgraded 5.1 - 5.2, now VNC over SSH fails w/ TCP_NODELAY

2004-01-29 Thread Scott I. Remick
On Tue, 20 Jan 2004 11:42:28 -0500, Scott I. Remick wrote: Well crap, everything was going so well. I upgraded from 5.1 to 5.2 using cvsup, recompiled (nearly) all my ports (some KDE stuff is still complaining, but that shouldn't be relevant here). I have openssh installed via ports:

Re: [Fwd: Re: PHP-Perl-MySQL-Apache (was: hi from california)]

2004-01-29 Thread Kevin D. Kinsey, DaleCo, S.P.
From: Kevin D. Kinsey, DaleCo, S.P. [EMAIL PROTECTED] To: ZZerver ZZserver [EMAIL PROTECTED] CC: [EMAIL PROTECTED] Subject: [Fwd: Re: PHP-Perl-MySQL-Apache (was: hi from california)] Date: Wed, 28 Jan 2004 11:55:22 -0600 MIME-Version: 1.0 Received: from ns1.tiadon.com ([69.27.132.161]) by

Re: can't assign requested address nn7j

2004-01-29 Thread Saint Aardvark the Carpeted
Dan disturbed my sleep to write: I have a alias on de2 of xxx.xxx.42.208 I can SSh to that address but can't ping it. I get can't assign requested address. Netmask is 255.255.255.248. Other port ping just fine XXX.XXX.41.1 on de2. Any help Hm...First of all, where are you trying to SSH

Re: Retired Linux user wants to switch

2004-01-29 Thread Jerry McAllister
Hi, I've been using Linux for about 7 years. At the beginning the Linux community was still very small and ... All these years I've seen Linux grow. I helped people on IRC while more and more users were coming with their questions. Yesterday I decided to go back to the IRC channel, after

Re: savemail: cannot save rejected email anywhere on recent 4.9-STABLE

2004-01-29 Thread George Vagner
just had same issue here, it was my version of perl i was using. what fixed it? i typed in use.perl system without quotes. - Original Message - From: Clint Gilders [EMAIL PROTECTED] To: [EMAIL PROTECTED]; [EMAIL PROTECTED] Sent: Thursday, January 29, 2004 10:28 AM Subject: savemail:

Re: use \000 in sed

2004-01-29 Thread Dan Nelson
In the last episode (Jan 29), Zhang Weiwu said: Hello. I wish to see all the files in some pathes in a string. Say, I wish to list all files in $PATH and manpath(1) What I can think of is to use #manpath | sed s/:/ /g |xargs ls (This is useful when auto-completing man command in a shell,

Diablo-jdk1.3.1 Tomcat Newbie Needs Install Help (Core Dumps)

2004-01-29 Thread zententin-forums
I've been trying for longer than I care to admit to get a non-gui FreeBSD server working with Tomcat. Now I have FreeBSD 4.9 Stable, Diablo JDK 1.3.1, and I'm trying to install Tomcat 4 or 5 from ports, but every time I try it, I get a core dump from java every time I restart the computer. I've

FreeBDS don't accept 4 networkcards

2004-01-29 Thread Sjaak Nabuurs
Your post is too general. You have to post details of what you are doing. Saying 4 Nics means nothing. Where are they and what are their purpose? Sorry try again I have a FreeBSD box 5.2 release with 4 NIC's realtec ethernet cards in one box For routing traffic to 4 different networks. 1 DSL

Configuring Ethernet Interface for 100 Half Duplex

2004-01-29 Thread Danie du Toit
I need t= o set up a spare Ethernet Interface as 100Mb/s Half Duplex, with no IP pr= otocol info and permanently in promiscuous mode. Currently the card autosense 100 Full - = I want to set up a IDS interface. I could not find it in ifconfig, so I g= uess it is done on init?

Re: locking a user into one directory

2004-01-29 Thread Dragoncrest
At 09:59 PM 1/28/04 -0500, you wrote: Dragoncrest [EMAIL PROTECTED] writes: I've seen this explained before, but I've never taken much interest in it as I never had a need for it. Well, it's starting to look like I do. What I'm wanting to do is give shell access to a user to shell

Re: Retired Linux user wants to switch

2004-01-29 Thread Q
On Thu, 2004-01-29 at 20:22, Mike Machuidel wrote: I've been using Linux for about 7 years. At the beginning the Linux community was still very small and very little people ever heard about it or even knew what is was. Many people called me crazy/stupid/dumb Be prepared to get that all over

FreeBSD 5.2 installation: Add of package qt-3.2.1 aborted, error code 1

2004-01-29 Thread Anthony Discolo
How do I check the debug screen for more info? Thanks, Anthony _ Check out the new MSN 9 Dial-up — fast reliable Internet access with prime features! http://join.msn.com/?pgmarket=en-uspage=dialup/homeST=1

Interest

2004-01-29 Thread zuber zaini
Dear Seller, Sir/Mom Hi, I am Zuber Zaini, I am from Singapore. I interest with ADTEC Stick Drive 256M. Do you have the goods?. If you have, can I buy it. I will use Credit Card for payment methods.If you accept please let me know as soon as possible. Thank you. Best Regards, Zuber Zaini.

Re: FreeBDS don't accept 4 networkcards

2004-01-29 Thread Q
This doesn't exactly help identify the problem much either. How about including the dmesg output from bootup, and maybe the output from pciconf. If the card isn't being detected you need to do some detective work to figure out where in the boot process things are going wrong. Is it not being

Re: FreeBSD 5.2 installation: Add of package qt-3.2.1 aborted, error code 1

2004-01-29 Thread Q
On Fri, 2004-01-30 at 02:02, Anthony Discolo wrote: How do I check the debug screen for more info? Use ALT+F1 (or F2/3 I don't remember exactly which one it is) -- Seeya...Q -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-

Re: use \000 in sed

2004-01-29 Thread Zhang Weiwu
Dan Nelson wrote: I'm not sure that sed can process \123-style octal characters, since it already uses the \ character for backreferences. Since you're only replacing one letter, you can use tr: manpath | tr ':' '\000' | xargs -0 ls oh Brilliant, i almost forgot this command! But once I need

FreeBSD 5.2: /usr/X11R6/lib/X11/rgb and /usr/X11R6/lib/X11/fonts not created?

2004-01-29 Thread Anthony Discolo
I'm having problems configuring X because these directories apparently haven't been created by the installation process. I'm rerunning sysinstall right now. Is there anything else I can try? Thanks, Anthony _ High-speed users—be

Re: use \000 in sed

2004-01-29 Thread Dan Nelson
In the last episode (Jan 30), Zhang Weiwu said: Dan Nelson wrote: I'm not sure that sed can process \123-style octal characters, since it already uses the \ character for backreferences. Since you're only replacing one letter, you can use tr: manpath | tr ':' '\000' | xargs -0 ls oh

libintl.so.4 not found when loading javaplugin in Firebird

2004-01-29 Thread Bjarne Wichmann Petersen
Hi! I get this when I start firebird: LoadPlugin: failed to initialize shared library /usr/local/diablo-jre1.3.1/plugin/i386/ns600/libjavaplugin_oji.so [Shared object libintl.so.4 not found] I don't know what it means or whether it's firebird og diablo that's faulty, though the javavm seems

RE: FreeBDS don't accept 4 networkcards

2004-01-29 Thread JJB
FBSD Friend No problem about your English, I understand what you are trying to do. Your private Lan IP address ranges are correct, each LAN circuit using an separate subnet. So lets start with the most obvious first. Check rc.conf to verify you do not have typing error on ifconfig statement for

Re: Configuring Ethernet Interface for 100 Half Duplex

2004-01-29 Thread Micheal Patterson
- Original Message - From: Danie du Toit [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Thursday, January 29, 2004 9:50 AM Subject: Configuring Ethernet Interface for 100 Half Duplex I need t with no IP pr Currently the card autosense 100 Full -interface. I could not

unable to open port `/dev/ttyS1'

2004-01-29 Thread marlon corleone
/dev/ttyS1 do not exist, how do i create this device? %sysctl kern.version kern.version: FreeBSD 5.2-RELEASE #0: Wed Jan 28 13:17:27 PHT 2004 [EMAIL PROTECTED]:/usr/src/sys/i386/compile/MMP %xmms unable to open port `/dev/ttyS1' (No such file or directory) unable to open port `/dev/ttyS1' (No

Re: wi output power control?

2004-01-29 Thread Michael Mee
I looked really hard in the archives for this before posting the question below, really! As well as reading the relevant docs (wi, ipconfig). Any pointers please? Maybe there's a better list to ask this question? Thx! - Original Message - From: Michael Mee [EMAIL PROTECTED] To: [EMAIL

RE: Interest

2004-01-29 Thread JJB
You are mistaken. There is no hardware for sale here -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of zuber zaini Sent: Thursday, January 29, 2004 11:17 AM To: [EMAIL PROTECTED] Subject: Interest Dear Seller, Sir/Mom Hi, I am Zuber Zaini, I am from

Acu Cobol 6.0 for Linux

2004-01-29 Thread Walter C. Pelissero
[apparently the first message didn't get through; this is a repost] Did enybody try to run AcuCobol 6.0 for Linux on FreeBSD's linulator? I tried a couple of times (with old Debian libraries and more recently Gentoo libraries) but runcbl keeps on getting a SIGSEGV right away. ccbl (the compiler)

Re: unable to open port `/dev/ttyS1'

2004-01-29 Thread Nathan Kinkade
On Thu, Jan 29, 2004 at 04:59:15PM +, marlon corleone wrote: /dev/ttyS1 do not exist, how do i create this device? %sysctl kern.version kern.version: FreeBSD 5.2-RELEASE #0: Wed Jan 28 13:17:27 PHT 2004 [EMAIL PROTECTED]:/usr/src/sys/i386/compile/MMP %xmms unable to open port

Serial console install via boot cd?

2004-01-29 Thread Bjorn Eikeland
Hi, I'm wanting to do a install via a serial console as I've only got one monitor, but I havent got any floppy drives here either.. Can the floppy procedure be used with a bootable cd, by just doing echo /boot/loader -h /iso_dir/boot.config ? .. and I'm really wanting to put /usr on a

Missing cupsomatic

2004-01-29 Thread Alex Huth
Hi guys! I've installed the metaport of cups and configured cups. When i try to print the errorlog shows missing file or directory cupsomatic in the filterdir of cups. Which port have i missed to install? Thanks for advice! Alex ___ [EMAIL

Re: Acu Cobol 6.0 for Linux

2004-01-29 Thread Jerry McAllister
[apparently the first message didn't get through; this is a repost] Your previous post got through. Probably the presumed answer is that no-one who saw it has tried this or feels competent to respond. You might some response if you could find a way to break the problem down a little more and

Re: Interest

2004-01-29 Thread Chad Leigh -- Shire.Net LLC
On Jan 29, 2004, at 9:54 AM, JJB wrote: You are mistaken. There is no hardware for sale here Not only that, it is a scam... -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of zuber zaini Sent: Thursday, January 29, 2004 11:17 AM To: [EMAIL PROTECTED] Subject:

Free BSD

2004-01-29 Thread T Glaser
This website leads me to believe that this is an OS software package? I don't know for sure though. What did I stumble across here? What are you offering for free? Not real clear here on the website. If this is an OS do you have any screen shots of what it looks like or is it command line? Tim

Re: Booting with 80 Gig hard drive

2004-01-29 Thread Chris Pressey
On Thu, 29 Jan 2004 14:37:39 +0200 rk47 [EMAIL PROTECTED] wrote: Hi FreeBSD'ers I have a problem with booting from FreeBSD 4.8/4.9 and 5.2, they all gave the same error. I have an 80Gig Seagate HD with a Pentium 4, Epox motherboard and Phoenix version 2.2 BIOS. [...] I use Boot Manager

RE: buildworld errors on clean 4.9 install

2004-01-29 Thread Richard Hogben
Thanks, some searching on Google pointed to the -j option I used, seems the -j option is not always a good idea for single processor computers. I have been building since this morning, and no errors as of yet! -Original Message- From: Sergey 'DoubleF' Zaharchenko [mailto:[EMAIL

RE: smtp and several freebsd servers

2004-01-29 Thread Mike
You can use one server and let the others use this server. On the client servers use sendmail which comes with freebsd modify the /etc/mail/sendmail.cf file: Change DH To DHyour.server.com your.server.com has to resolve, either by dns or through /etc/hosts Mike -Original Message-

how to make .ko filles ?

2004-01-29 Thread manish gautam
Sir I have made a'.C' file for a netgraph node.but i hav to compile it to make a .ko file so that i can use it as a kernel module...after ( kldload ) So please tell me how to make .ko file from a .C file. sir please reply me as soon as possible. Thanking u Best

Re: unable to open port `/dev/ttyS1'

2004-01-29 Thread Ion-Mihai Tetcu
On Thu, 29 Jan 2004 11:34:22 -0600 Nathan Kinkade [EMAIL PROTECTED] wrote: On Thu, Jan 29, 2004 at 04:59:15PM +, marlon corleone wrote: /dev/ttyS1 do not exist, how do i create this device? %sysctl kern.version kern.version: FreeBSD 5.2-RELEASE #0: Wed Jan 28 13:17:27 PHT 2004

Re: how to make .ko filles ?

2004-01-29 Thread jan . muenther
So please tell me how to make .ko file from a .C file. Check out /usr/share/examples/kld for a bunch of examples on how to implement KLDs in FreeBSD. Cheers, J. ___ [EMAIL PROTECTED] mailing list

Re: Free BSD

2004-01-29 Thread Peter Ulrich Kruppa
On Thu, 29 Jan 2004, T Glaser wrote: This website leads me to believe that this is an OS software package? Yes, this absolutely true. I quote the headline on http://www.freebsd.org : What is FreeBSD? FreeBSD is an advanced operating system for x86 compatible, AMD64, DEC

5.2 /usr/libexec/ld-elf.so.1 upgrade problem in make installworld

2004-01-29 Thread Jonathan Clarke
Hello everyone, I have a problem during make installworld while upgrading from 5.1-p11 to 5.2-RELEASE. I cvsup'ed my source tree this morning, did make buildworld, make buildkernel and make installkernel, reboot, everything was fine. While running make installworld, I bump into an error in

line-in recorder

2004-01-29 Thread Brian H
is there some software for freebsd that I could use to record what i have coming in on the line-in on my sound card? _ There are now three new levels of MSN Hotmail Extra Storage! Learn more.

RE: Is there a HOW-TO for a network install of FreeBSD?

2004-01-29 Thread Mike
You can try installing a minimum system to a system similar to the one at the colo, then dd the partition from linux and copy over and dd back to the disk and configure lilo/grub, and check. Try it on a test environment first, if you have. Mike Hi- I have a server that currently has Redhat

FreeBSD 5.2: How do I automatically restart twm with the Default session?

2004-01-29 Thread Anthony Discolo
Everytime I log in twm asks me to load the Default session. Is there any way I can have it automatically load it (maybe something in the ~/.twmrc)? I've also run into problems with reloading the Default session. Sometimes twm dumps core. If I load the Fail Safe session, it seems to work

multiple aliases(IPs) same netmask...error...why?

2004-01-29 Thread manish gautam
Sir, I am facing some problems :: 1. If i try to make aliases having same netmask like 255.255.255.0, it gives error ( SCIOADDR file exists..something like that)..Why is it so ? 2. But if I try the same using netmask 255.255.255.255 it does'nt give any error...why ? 3.

Re: Free BSD

2004-01-29 Thread Kevin D. Kinsey, DaleCo, S.P.
T Glaser wrote: This website leads me to believe that this is an OS software package? I don't know for sure though. What did I stumble across here? What are you offering for free? Not real clear here on the website. If this is an OS do you have any screen shots of what it looks like or is it

snoop (Sun styly) for bsd ?

2004-01-29 Thread Julian Holley
Hi all - does anyone know about the program 'snoop' (Sun microsystems fame) available for BSD - basically all I want is a click or beep on network activity out of my machine - I'm not after a bulky analaysis program - just somat simple to run in the back ground ? - any ideas much appreciated,

Re: multiple aliases(IPs) same netmask...error...why?

2004-01-29 Thread Kevin Stevens
On Thu, 29 Jan 2004, [iso-8859-1] manish gautam wrote: I am facing some problems :: 1. If i try to make aliases having same netmask like 255.255.255.0, it gives error ( SCIOADDR file exists..something like that)..Why is it so ? Because that's not the correct netmask for a FreeBSD

Re: snoop (Sun styly) for bsd ?

2004-01-29 Thread Kevin Stevens
On Thu, 29 Jan 2004, Julian Holley wrote: Hi all - does anyone know about the program 'snoop' (Sun microsystems fame) available for BSD - basically all I want is a click or beep on network activity out of my machine - I'm not after a bulky analaysis program - just somat simple to run in

Re: snoop (Sun styly) for bsd ?

2004-01-29 Thread Matthew Seaman
On Thu, Jan 29, 2004 at 07:31:16PM +, Julian Holley wrote: Hi all - does anyone know about the program 'snoop' (Sun microsystems fame) available for BSD - basically all I want is a click or beep on network activity out of my machine - I'm not after a bulky analaysis program - just somat

Trying to set up cvsup mirror

2004-01-29 Thread stan
I'm trying to set up a cvsup mirror to use for updating about 50 machines that are internal to our corporate network. Since I have better control over the firewall et all from my home network, I'm building the machine there. I've got it built, and used the cvsup-mirror port to assist me in

Re: line-in recorder

2004-01-29 Thread Nathan Kinkade
On Thu, Jan 29, 2004 at 12:34:32PM -0600, Brian H wrote: is there some software for freebsd that I could use to record what i have coming in on the line-in on my sound card? /usr/ports/audio/audacity is a nice tool. http://audacity.sourceforge.net/ Nathan -- gpg --keyserver pgp.mit.edu

Gigabit ethernet

2004-01-29 Thread Vulpes Velox
Any suggestions on gigabit ethernet? I've been looking around and I've been having a hard time finding 64 gigabit ethernet cards. Most I come across have slightly newer chip numbers than what is listed. ___ [EMAIL PROTECTED] mailing list

Re: Trying to set up cvsup mirror

2004-01-29 Thread Ion-Mihai Tetcu
On Thu, 29 Jan 2004 14:38:14 -0500 stan [EMAIL PROTECTED] wrote: cvsup13.freebsd.org seems to be down; use another server. /usr/ports/sysutils/fastest_cvsup will get you the best one. -- IOnut Unregistered ;) FreeBSD user ___ [EMAIL PROTECTED]

Re: FreeBDS don't accept 4 networkcards

2004-01-29 Thread Jonathan Chen
On Thu, Jan 29, 2004 at 04:40:44PM +0100, Sjaak Nabuurs wrote: Your post is too general. You have to post details of what you are doing. Saying 4 Nics means nothing. Where are they and what are their purpose? Sorry try again I have a FreeBSD box 5.2 release with 4 NIC's realtec

freebsd 5.2 running as vmware client broken?

2004-01-29 Thread jeff . king
Anybody have any sucess running/installing 5.2 under vmware? Doesn't seem to work past 5.1 for me. Jeff :) -- NOTICE: The information contained in this electronic mail transmission is intended by Convergys Corporation for the use of the named individual or entity to which it is directed and

RE: freebsd 5.2 running as vmware client broken?

2004-01-29 Thread Nick Twaddell
It is because FreeBSD comes with smp and apic precompiled into the kernel. VMware does not support smp. So you need to start it in safe mode, install, first boot, start in safe mode, recompile your kernel WITHOUT smp and apic. Then it will work like a charm :) Nick -Original Message-

Re: RSS/RDF feed reader

2004-01-29 Thread Jonathan Arnold
Michael L. Hostbaek wrote: What are people using as a RSS/RDF feed reader on FreeBSD ? I tried out Krss but I am not too happy with it, I like to know if there are some alternatives.. This was asked long ago (I'm slowly working my way through my -questions backlog!) and I'd like to suggest

Building JDK14

2004-01-29 Thread Jorn Argelo
Hi all, I'm currently building JDK14 from the ports tree (/usr/ports/java/jdk14) on FreeBSD 5.2-RELEASE. Before that I compiled blackdown-java from the ports-tree so I could compile the native one. However, it's busy for almost four hours now with building it. Now my question was, does anybody

Re: Free BSD

2004-01-29 Thread Vulpes Velox
On Thu, 29 Jan 2004 09:54:44 -0800 T Glaser [EMAIL PROTECTED] wrote: This website leads me to believe that this is an OS software package? I don't know for sure though. What did I stumble across here? What are you offering for free? Not real clear here on the website. If this is an OS do you

5.1 - 5.2 disaster

2004-01-29 Thread Michael Clark
First off, this is not a hardware problem! It crashes at the exact same spot over and over on multiple different commands. I had a 5.1 - 5.2 upgrade via cvsup that went terribly wrong. The machine got rebooted and certain things would no longer work. I cannot get a make world, or make

Re: Hot Swap hardware on FreeBSD?

2004-01-29 Thread Jesse Guardiani
Stephen P. Cravey wrote: I'm trying to locate a good resource for creating hot swap capable servers with FreeBSD and Vinum. Specifically, I'm trying to find out several things: Are there resources somewhere that document this type of thing? Please? Do I need controllers for SATA/SCSI

Re: buildworld errors on clean 4.9 install

2004-01-29 Thread Kris Kennaway
On Thu, Jan 29, 2004 at 09:55:23AM -0800, Richard Hogben wrote: Thanks, some searching on Google pointed to the same thing, seems the -j option is not always a good idea for single processor computers. I have been building since this morning, and no errors as of yet! -j shouldn't cause errors

Re: Building JDK14

2004-01-29 Thread Matthew Seaman
On Thu, Jan 29, 2004 at 09:40:03PM +0100, Jorn Argelo wrote: I'm currently building JDK14 from the ports tree (/usr/ports/java/jdk14) on FreeBSD 5.2-RELEASE. Before that I compiled blackdown-java from the ports-tree so I could compile the native one. However, it's busy for almost four

Re: Building JDK14

2004-01-29 Thread Jason Stewart
On 29/01/04 21:40 +0100, Jorn Argelo wrote: Hi all, I'm currently building JDK14 from the ports tree (/usr/ports/java/jdk14) on FreeBSD 5.2-RELEASE. Before that I compiled blackdown-java from the ports-tree so I could compile the native one. However, it's busy for almost four hours now

Can someone explain where the cvsup-mirror port puts it's crontab entry?

2004-01-29 Thread stan
I've just installed this wonderful port, and with some kind help from the list got it working. Thanks to everyone. Now, I've got a learning question. This port creates a crontab entry to schedule updates. I looked in /var/cron/tabs, and I don't see it. I can't su to that user as his shell is

Re: showing total/free memory

2004-01-29 Thread Rowdy
Chris Pressey wrote: Well, I'm not sure if it works on 5.x, but you could try /usr/ports/sysutils/muse Should be easier to parse than the other options. -Chris Works fine under 5.1 - thanx Chris. However the output is a little confusing, /var/run/dmesg.boot shows this: real memory =

DVD Burner recommendations

2004-01-29 Thread Chris
*This message was transferred with a trial version of CommuniGate(tm) Pro* For 5.2, does anyone have recommendations for a compatible DVD R/RW internal *slim* drive (ie: that's made to go inside a laptop)? Thanks, Chris _ Email harvesters

Re: 5.1 - 5.2 disaster

2004-01-29 Thread Chris
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On Thursday 29 January 2004 02:54 pm, Michael Clark wrote: First off, this is not a hardware problem! It crashes at the exact same spot over and over on multiple different commands. I had a 5.1 - 5.2 upgrade via cvsup that went terribly wrong.

Re: showing total/free memory

2004-01-29 Thread Jez Hancock
On Fri, Jan 30, 2004 at 08:11:26AM +1100, Rowdy wrote: Chris Pressey wrote: Well, I'm not sure if it works on 5.x, but you could try /usr/ports/sysutils/muse Should be easier to parse than the other options. -Chris You could always output the results of dmesg at boot-time to a file

Re: snoop (Sun styly) for bsd ?

2004-01-29 Thread Jez Hancock
On Thu, Jan 29, 2004 at 07:31:16PM +, Julian Holley wrote: Hi all - does anyone know about the program 'snoop' (Sun microsystems fame) available for BSD - basically all I want is a click or beep on network activity out of my machine - I'm not after a bulky analaysis program - just somat

  1   2   >