On Thu, 27 May 2004, Senandung Mendonan wrote:
On Thu, 27 May 2004, Gautham Ganapathy wrote:
I have installed 5.2.1-RELEASE on my system (Athlon XP/nForce 2
Ultra/GeForce 3). Unfortunately, I am not able to use nVidia's fbsd
drivers. I saw a few posts that mentioned it would work under
In article [EMAIL PROTECTED], Paul Brownsea (pb) writes:
pb ad0: READ command timeout tag=0 serv=0 - resetting
pb ata0: resetting devices ..
pb And then it just hangs.
This one is getting popular.
There is at least one disk controller chipset out there which FBSD 4.X
doesn't understand. If
Mike Maltese wrote:
I'm looking for an smtp daemon that is less complex than
sendmail, can use procmail and has some virtusertable
equivalent features. Allowing relay based on mx is going to
be a requirement for some of the boxes as well.
Sendmail is working ok for me, but I'm intersted in
In article [EMAIL PROTECTED], Joseph Gleason (jg) writes:
jg I'm going to check into postfix and maybe qmail.
Haven't played with qmail, but we were handed postfix on some managed
linux servers. Years of experience with sendmail made me dread
learning another monsterous system.
Actually I just
Hello,
I have an old laptop, an HP XE3 OmniBook. Nice machine from an
ergonomical point of view, and I was thinking of recycling it by
installing FreeBSD.
I downloaded the ISO for 5.2.1. It starts to boot just fine, but during
the kernel load it dies with the message
cbb0: Unsupported
hi
anyone can help me ? i tried many different setting, but still i can't
get X to work for my ibm thinkpad 240x.
I'm sorry for the long log file..
bash-2.05b# cat /var/log/XFree86.0.log
XFree86 Version 4.3.0
Release Date: 27 February 2003
X Protocol Version 11, Revision 0, Release 6.6
Build
Hello,
bellow you will find 2 ipfw scripts, first one working, and second
is a very good looking, but not working.
what am I missing in the second script?
first script starts here ---
#!/bin/sh
ipfw -f flush
ipfw add 1 check-state
ipfw add 100 allow all from any to any via lo0
ipfw add
On Thu, May 27, 2004 at 03:31:07PM +0100, Daniel Bye wrote:
On Thu, May 27, 2004 at 09:17:09AM -0500, Andy Wettstein wrote:
Hello,
I'm having a problem with the dependencies for openldap. I build
openldap21 with sasl support so I get openldap21-sasl-client. Then I
build pam_ldap and
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
I have read several posts on this problem, but mine is slightly
different problem in that my machine seems to try and configure more
than one pcm device -- cycling through pcm0, pcm1, ... , pcm27.
Obviously, I've compiled my kernel with device pcm and
Hi!!
Someone can give me a .p12 file please because I cannot import a certificate in
Windows (it's just for try) from Freebsd to Windows because my serveur (freebsd) is KO
and I want (for the school) to import a .p12 file to make a VPN. Even if I will not
use this fiel is just to show to my
The FBSD 4.10-RELEASE announcement
(http://www.freebsd.org/releases/4.10R/announce.html) mentioned
5.3-RELEASE. Any word on when 5.3 might arrive?
--
Brad Tarver, CCNA
Network Administrator
Forman Perry Watkins Krutz Tardy
188 East Capitol Street
Suite 200
Jackson, MS 39201
United States
Ph:
On Fri, 28 May 2004, John Weber wrote:
I have read several posts on this problem, but mine is slightly
different problem in that my machine seems to try and configure more
than one pcm device -- cycling through pcm0, pcm1, ... , pcm27.
Obviously, I've compiled my kernel with device pcm and I've
Hi,
I have just tried to install a fresh distribution of FreeBSD 5.2.1 on a
IBM T30. The system locks up with just after:
pccard0: 16-bit PCCard bus on cbb0
cbb0: [MPSAFE]
I have been using this same laptop with FreeBSD 4.9 and 4.10 without any
problems.
Does anybody have FreeBSD 5.2.1
Hi!
New to FreeBSD and running 5.2.1-RELEASE on an Alpha. I do predominantly
SysV/ATT boxes, so I feel a bit out of it...
Question #1:
I need to create a second loopback interface, which I can do just fine
at the command line:
# ifconfig lo1 create
# ifconfig lo1 inet a.b.c.d netmask x.x.x.x
How
On Fri, 28 May 2004 09:23:22 -0500
Brad Tarver [EMAIL PROTECTED] wrote:
The FBSD 4.10-RELEASE announcement
(http://www.freebsd.org/releases/4.10R/announce.html) mentioned
5.3-RELEASE. Any word on when 5.3 might arrive?
AFAIK, its still TBD but I've seen unofficial mentions of this
summer
Hi everyone!
I have followed the 'FreeBSD Jumpstart Guide' to build a system for
installing FreeBSD 4.9-RELEASE via PXE. I can now perform PXE client
installs, but have so far been unable to resolve the following
problems:
1. I have compiled and installed a custom kernel on my PXE server
OK, I was going to try turning off DMA, but it won't. There isn't an actual
setting in the CMOS setup for it. After consulting the manual it tells me
to disable PCI IDE busmaster, so I did. But DMA is still enabled so it
still does the same. Should I just give up or is there anything else to
Here is what my system is telling me.
twe0: unexpected status bit(s) 80PCIPERR
twe0: PCI parity error: Reseat card, move card or buggy device present.
Here is what I am running.
FreeBSD 4.7 p25
boot disk IDE
SCSI tape drive
twe0 is an Escalade 7500-4
twe1 is an Escalade 7000-2
I have tried two
During buildworld, I wandered off. When I returned, my machine was,
alarmingly, in single user mode, demanding that I run fsck manually.
I'm running fsck right now, and it's finding all sorts of block size
errors, to which I'm simply hitting 'y' and agreeing that things should
be salvaged and
In just the last couple weeks xmms has displayed these
errors. xmms [mp3file] still plays, but from mozilla,
xmms exits.
Gdk-WARNING **: Missing charsets in FontSet creation
Gdk-WARNING **: ISO8859-1
Gdk-WARNING **: ISO8859-1
** CRITICAL **: Couldn't open
perl -MCPAN -e 'install BerkeleyDB'
... still gives:
BerkeleyDB.xs:74: #error db.h is from Berkeley DB 1.x - need at least
Berkeley DB 2.6.4
*** Error code 1
I've deleted and re-installed that db3 pkg, but still get the same error.
my first try would probably be to remove all CPAN
Here is what my system is telling me.
twe0: unexpected status bit(s) 80PCIPERR
twe0: PCI parity error: Reseat card, move card or buggy
device present.
Here is what I am running.
FreeBSD 4.7 p25
boot disk IDE
SCSI tape drive
twe0 is an Escalade 7500-4
twe1 is an Escalade 7000-2
Robert Downes wrote:
During buildworld, I wandered off. When I returned, my machine was,
alarmingly, in single user mode, demanding that I run fsck manually.
I'm running fsck right now, and it's finding all sorts of block size
errors, to which I'm simply hitting 'y' and agreeing that things
On Friday 28 May 2004 10:00 am, Robert Downes wrote:
During buildworld, I wandered off. When I returned, my machine was,
alarmingly, in single user mode, demanding that I run fsck manually.
I'm running fsck right now, and it's finding all sorts of block size
errors, to which I'm simply
Robert Lowe wrote:
Hi!
New to FreeBSD and running 5.2.1-RELEASE on an Alpha. I do predominantly
SysV/ATT boxes, so I feel a bit out of it...
Question #1:
I need to create a second loopback interface, which I can do just fine
at the command line:
# ifconfig lo1 create
# ifconfig lo1 inet a.b.c.d
Hi, and thanks in advance for any help provided.
I am trying to install FreeBSD 4.10 on a new, clean ProLiant DL380 g3. It
has four 72.8 GB drives, and currently set up as a RAID5 by it's Smart Array
5i boot controller.
I want to start by making this as simple as possible, so only one
I am trying to compile xsp in my freebsd box (4.9 RELEASE)
and I got these error when I do make
/usr/local/bin/mcs -debug+ -debug:full -nologo -r System.Web.dll
-r:Mono.Posix.dll /d:
MODMONO_SERVER /out:mod-mono-server.exe
Error CS2008: No files to compile were specified
Compilation failed: 1
Hi, and thanks in advance for any help provided.
I am trying to install FreeBSD 4.10 on a new, clean ProLiant DL380 g3. It
has four 72.8 GB drives, and currently set up as a RAID5 by it's Smart
Array
5i boot controller.
How about installing via ftp ? thats what I have used in the past when
I've cleaned out /usr/src and /usr/obj and cvsup'd RELENG_5_2 sources,
but I'm still getting the following failure when I run 'make
buildworld'. Any suggestions?
Cheers,
Mat
---
=== usr.sbin/config
/usr/obj/usr/src/i386/usr/src/usr.sbin/config created for
/usr/src/usr.sbin/config
yacc -d
* Len Conrad [EMAIL PROTECTED] [2004-05-28 09:17 -0800]:
my first try would probably be to remove all CPAN modules installed
under the old perl, and reinstall them. Then try installing that DB.
However, wiser heads may have a better clue.
Sounds like a good plan, but MCPAN doesn't seem to
On Tue, May 18, 2004 at 08:43:33PM +0200, Andreas Kohn wrote:
cvs can't provide you with that kind of information, because it doesn't
remember it (cvs works on file-by-file base). But, it can tell you when
the 1.337 commit to vfs_syscalls.c happened.
...
You can then use the archive of
Hi everyone.
I'm trying to set up mail system using
postfix+cyrus-imapd+cyrus-sasl+mysql+pam_mysql
When trying to check mailbox using pop3 or imap I get following error:
May 29 01:10:55 relay pop3[849]: badlogin: relay.0f.ru [192.168.127.2]
plaintext vasya SASL(-13): authentication failure:
On Friday 28 May 2004 01:01 pm, Kevin A. Pieckiel wrote:
On Tue, May 18, 2004 at 08:43:33PM +0200, Andreas Kohn wrote:
cvs can't provide you with that kind of information, because it
doesn't remember it (cvs works on file-by-file base). But, it can
tell you when the 1.337 commit to
On Thursday 27 May 2004 22:30, Christian Hiris wrote:
When I rebooted the machine I got a giving up on xx buffers message and
all filesystems marked dirty. After rebooting the system background fsck
run and left one filesystem dirty - unexpected softupdate inconsistency.
Then the system died
On Thursday 27 May 2004 01:01 am, Kent Stewart wrote:
On Wednesday 26 May 2004 10:19 pm, Earl Larsen wrote:
What would change for 4.9 current? I am a little confused on the
difference of RELENG_4_9 and RELENG_4_9_0_RELEASE. Is the first one
for stable systems, and the later one for current
I have a script which was provided to me (from a PR log)
and its for ramdisk-ownership:
=
# PROVIDE: ramdisk-own
# REQUIRE: ramdisk mountcritlocal
# BEFORE: SERVERS
# KEYWORD: FreeBSD
. /etc/rc.subr
name=ramdisk
stop_cmd=:
On Fri, 2004-05-28 at 19:07, J.D. Bronson wrote:
I have a script which was provided to me (from a PR log)
and its for ramdisk-ownership:
=
# PROVIDE: ramdisk-own
# REQUIRE: ramdisk mountcritlocal
# BEFORE: SERVERS
# KEYWORD:
J.D.,
Take the set -x out.
= Copied from message sent on Fri May 28 18:07:14 2004
by J.D. Bronson Subject:ramdisk-own on 5.2.1.
I have a script which was provided to me (from a PR log)
and its for ramdisk-ownership:
=
#
THANKS GUYS!!! - that was FAST
At 06:14 PM 5/28/2004, Michael D Hughes wrote:
J.D.,
Take the set -x out.
= Copied from message sent on Fri May 28 18:07:14 2004
by J.D. Bronson Subject:ramdisk-own on 5.2.1.
I have a script which was provided to me (from a PR log)
and its for
Hello,
I have an L2TP server running on 4.2 FreeBSD that needs to bind to UDP
port 1701.This works usually, but in rare cases, I see another application, say
SNMP, has already taken this port, so the L2TP bind fails. The SNMP client
doesn't care what UDP port it gets (it doesn't specify a
Hello freebsd-questions,
Is Zyxel Prestige 630-41 works with FreeBSD?
--
Best regards,
Alexander mailto:[EMAIL PROTECTED]
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To
How to get the best results from FreeBSD questions.
===
Last update $Date: 2003/03/09 22:09:31 $
This is a regular posting to the FreeBSD questions mailing list. If
you got it in answer to a message you sent, it means that the sender
thinks that
The trouble with books is that you can't update them the way you can a web page
or any other online documentation. The result is that most leading edge
computer books are out of date almost before they are printed. Unfortunately,
The Complete FreeBSD, published by O'Reilly, is no exception.
Hi,
that sounds very familiar to me. I had exactly the same problems using 3ware Escalade
Controllers
on several older Mainboards. Try using a newer Board with an actual Chipset and I
bet it will
work fine! I think it's a problem with PCI-Version.
Greetz,
Frank
Here is what my system is
Without double checking, the 630 is just an ADSL router running a
connection to FreeBSD over ethernet. In short, so long as the ADSL
parameters are configured on the 630 it should all work just fine.
Hope this helps. I'm running a 600 series myself.
Jon
On Sat, 2004-05-29 at 00:49, Alexander
Hi. Does anyone have a patch for reporting kqueue descriptor
information from fstat? Please cc me in reply.
thanks
vijay
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to
On Friday 28 May 2004 02:55 pm, Earl Larsen wrote:
On Thursday 27 May 2004 01:01 am, Kent Stewart wrote:
On Wednesday 26 May 2004 10:19 pm, Earl Larsen wrote:
What would change for 4.9 current? I am a little confused on the
difference of RELENG_4_9 and RELENG_4_9_0_RELEASE. Is the first
Hi,
I'm trying to install on my dell dimension 6100 and the installation is hanging on
probing devices. I tried disabling acpi and booting in safe mode but both hang at the
same spot.
What should I try next?
Thanks, Bob
-
Do you Yahoo!?
On Thu, 27 May 2004, Gustafson, Tim wrote:
I am getting the following error in vi pretty consistently:
Error: input: Resource temporarily unavailable
Usually I get this at every attempt I make to run vi. Every now and
then I'll somehow manage to stay in vi however long I want. It
Not quite a newbie, but not very good either, apparently. :( I did a cvsup
last night, following instructions from the handbook, and hosed up my box.
=
[EMAIL PROTECTED] /home/ecarmody] $ uname -a
FreeBSD oberon.hudsonvalleynetworks.com 5.2.1-RELEASE-p7 FreeBSD
On Friday 28 May 2004 09:41 pm, Edward Carmody wrote:
Not quite a newbie, but not very good either, apparently. :( I did a
cvsup last night, following instructions from the handbook, and hosed
up my box.
=
[EMAIL PROTECTED] /home/ecarmody] $ uname -a
FreeBSD
On Fri, May 28, 2004 at 02:20:45PM -0700, Kent Stewart wrote:
The history is always available using cvsweb.cgi such as
http://www.freebsd.org/cgi/cvsweb.cgi/src/sys/kern/vfs_syscalls.c
Back up to the top and bookmark it.
Also has the alias http://cvsweb.freebsd.org/
Kris
52 matches
Mail list logo
