On Mon, 2004-10-18 at 15:32 -0700, Joshua Tinnin wrote:
Well, I'm not sure about pulling articles from multiple servers, but my
GUI newsreader of choice is Pan. However, it never reached a stable or
gold version, and it has been stagnant for some time, as the author
doesn't seem to have
On Saturday 16 October 2004 08:29, Ming Zhang wrote:
I want to know how to set the Default Gateway to be the pppoe server's ip.
Or it's impossible?
add default HISADDR
___
[EMAIL PROTECTED] mailing list
On Mon, 18 Oct 2004 23:24:04 -0700
Martin Paredes [EMAIL PROTECTED] spake thus:
On Saturday 16 October 2004 08:29, Ming Zhang wrote:
I want to know how to set the Default Gateway to be the pppoe server's ip.
Or it's impossible?
add default HISADDR
Another way to do this if for some
On Oct 18, 2004, at 10:39 AM, Matty Moose wrote:
Also, when I shut down the Disk array, the BSD box shows:
(noperiph:sym0:0:-1:-1): SCSI BUS mode change from HVD to LVD.
I'm not a SCSI expert, and I'm not on sure footing here with LVD vs
HVD, etc. Any help is much appreciated. :)
It is
On Oct 19, 2004, at 12:38 AM, [EMAIL PROTECTED] wrote:
On Oct 18, 2004, at 10:39 AM, Matty Moose wrote:
Also, when I shut down the Disk array, the BSD box shows:
(noperiph:sym0:0:-1:-1): SCSI BUS mode change from HVD to LVD.
I'm not a SCSI expert, and I'm not on sure footing here with LVD vs
HVD,
On Oct 18, 2004, at 2:07 PM, Eirik Øverby wrote:
Adaptec AAC-2410SA 4-Port S-ATA RAID Controller
This one is gonna be tricky on you, I think.
Should work fine. I was using a 2200S, which uses the same aac driver
under 5-CURRENT on amd64 a while back before I downgraded to i386
version.
And I
Hello,
First i want to quote something:
Vinum is being rewritten; the new one is called gvinum or geom_vinum.
It handles swap, and it should be in 5.3.
Greg
Here Greg tells me that Vinum should be in 5.3 Yesterday after 5.3-RC1 came trough, i
downloaded the ISO and installed 5.3-RC1.
-Original Message-
From: Vonleigh Simmons [mailto:[EMAIL PROTECTED]
Sent: Tuesday, October 19, 2004 4:19 AM
To: [EMAIL PROTECTED]
Subject: Re: 5.3-STABLE
Sorry, forgot to add that I did do a cvsup before the make buildworld.
The relationship between the most commonly
Hi!
I have compiled my own kernel now, editing the GENERIC configfile
that comes with the distrubtion and commenting out a huge number of
options.
The kernel size is still much larger than a linux kernel
(3.7 MB - 1.2 MB).
Why is this?
Is there anything similar to lspci in FreeBSD?
What about
On Monday 18 October 2004 21:15, [EMAIL PROTECTED] wrote:
Thanks - but I can't find 'aio' in my kernel config file at all. What
line should I comment out to get rid of it?
options VFS_AIO
Easy when you know. Thanks a lot - I guess vmware won't be happy, but then it
hasn't been working for
On Monday 18 October 2004 11:10 pm, Christopher Nehren
[EMAIL PROTECTED] wrote:
On Mon, 2004-10-18 at 15:32 -0700, Joshua Tinnin wrote:
Well, I'm not sure about pulling articles from multiple servers,
but my GUI newsreader of choice is Pan. However, it never reached a
stable or gold
[Loren M. Lang, 2004-10-18]
I am intresting in doing video capture over firewire on FreeBSD. I
understand that FreeBSD supports firewire controllers that conform to
the OHCI spec (basically, all of them), but it seems that it really is
only useful for SBP2 which is just hard drives. Is
Moin Florian!
Florian Hengstberger schrieb am Tuesday, den 19. October 2004:
Is there anything similar to lspci in FreeBSD?
pciconf -l
What about lsmod, is there a tool which lists the loaded
kernel modules?
kldstat
How can I find out which driver modules are used for my
network card?
On Mon, Oct 18, 2004 at 09:04:00PM +0200, Benjamin Walkenhorst wrote:
Hello,
Geert Hendrickx wrote:
ttyv0/usr/bin/cu -l cuaa0 vt100 on secure
But this gives me the following error when restarting init:
init: getty repeating too quickly on port /dev/ttyv0, sleeping
On Tue, 2004-10-19 at 00:57 -0600, Chad Leigh -- Shire.Net LLC wrote:
On Oct 18, 2004, at 2:07 PM, Eirik Øverby wrote:
Adaptec AAC-2410SA 4-Port S-ATA RAID Controller
This one is gonna be tricky on you, I think.
Should work fine. I was using a 2200S, which uses the same aac driver
Am Dienstag, 19. Oktober 2004 07:53 schrieb [EMAIL PROTECTED]:
Hi!
I'm a FreeBSD newcomer. And I've my eyes open wide: there is so much
of documentation, I just don't know what to believe...
My problem: my computer connected to the server via cable. The server
You mean to a router? And what
On 2004-10-18 20:03, Tuc [EMAIL PROTECTED] wrote:
Hi,
I did a little more investigation of the problem with nVidia on
5.2.1-RELEASE-pX where X is higher than 4...
It turns out that after hand applying patches, once I apply the
msync5.patch that was p9, my nVidia X starts
Hello list,
i have a problem on several freebsd-servers with the mbufs shown by
netstat -m
I have already compiled the kernel to switch the allocated size to
128MB mbufs
and 32MB mbufs clusters, but some systems take the hole memory by time.
First the system only needs 8MB. Has someone the same
I have a freebsd firewall/router. I want to test the data throughput
through the router with and without the firewall turned on.
How would I go about testing the network throughput of a machine?
TIA,
tomoki
___
[EMAIL PROTECTED] mailing list
On Tuesday 19 October 2004 10:34, Florian Hengstberger wrote:
Hi!
I have compiled my own kernel now, editing the GENERIC configfile
that comes with the distrubtion and commenting out a huge number of
options.
The kernel size is still much larger than a linux kernel
(3.7 MB - 1.2 MB).
Why
[Svein Halvor Halvorsen, 2004-10-18]
Is this at all possible? My BIOS don't seem to recognize my brand new 200 GB
disk, but that is nothing new. I can initialize a new slize, setup bsdlabel
and do newfs on if without problems. How can I verify that the entire disk is
usable without
On Monday 18 October 2004 12:30, Andreas Widerøe Andersen wrote:
Hi,
Is there a simple way (as root) to recover lost ttyps?
Yes, watch(8) and snp(4) are your friends.
kldload snp
watch -w p0
and you'll have read-write access to /dev/ttyp0
Cheers, NikV
Hi,
I've recently just installed apache-2.0.52_1 from ports on a new system.
I've taken an already working configuration from an older machine and
transferred it to the new server. No matter what I do I can't get SSL
working even though it shows up as being used.
www 54695 0.0 0.4 14256
* Nelis Lamprecht [EMAIL PROTECTED] [1041 11:41]:
Hi,
I've recently just installed apache-2.0.52_1 from ports on a new system.
I've taken an already working configuration from an older machine and
transferred it to the new server. No matter what I do I can't get SSL
working even though it
Dick Davies wrote:
* Davon Shire [EMAIL PROTECTED] [1055 16:55]:
Dick Davies wrote:
It's already in. man 4 ehci.
*BUGS* #end The driver is not finished and is quite buggy. Currently
there is no support for hubs that are connected with high speed upstream
and low or full speed downstream
On Mon, 2004-10-18 at 19:39, Giorgos Keramidas wrote:
On 2004-10-18 19:25, Mike Jeays [EMAIL PROTECTED] wrote:
I have several Xlib programs that compiled successfully on earlier
versions of FreeBSD (4.1 and before), using xmkmf and make. With 5.1, I
get an error message:
make: don't
I like rar for freebsd for the possibility to make predefined archive
sizes. If I tar a directory and want to burn it (later) to a cdr is it
possible with (free/OSS) tar to predefine such chunks? Or is there some
other utility to do this for me?
--
dick -- http://www.nagual.st/ -- PGP/GnuPG key:
I have a 7506-4LP running Raid 1 on a 4.8 box and it had been working like a
charm. It is not low profile, but don't know why it would matter.
Sincerely,
Robert T. Covell
President / Owner
Rolet Internet Services, INC
Web: www.rolet.com
Email: [EMAIL PROTECTED]
Phone: 816.471.1095
Fax:
On Tue, Oct 19, 2004 at 01:02:28AM +0100, Shaun Friedle wrote:
Unfortunately he seems to be encountering more problems than I suspected
he would, and now he has encountered one I am unable to solve - if he
uses the ati driver then when he types startx he gets a hard lock, the
monitor goes into
* Davon Shire [EMAIL PROTECTED] [1016 12:16]:
If by high-speed support you mean 'as fast as a local disk' then try it. It
works.
While I appreciate the quick reply. Reading my messages in detail
might have been a little more enlightening in the kind of info I wanted.
If there was
Hi.
Anyone have any insight on this?
On 18-Oct-04, at 1:07 AM, Jason Lixfeld wrote:
I'm wondering if someone can point out my error here. I've got PAM
authenticating ssh users like so:
authrequiredpam_nologin.so no_warn
authsufficient
Dick Davies wrote:
* Davon Shire [EMAIL PROTECTED] [1055 16:55]:
Dick Davies wrote:
It's already in. man 4 ehci.
*BUGS* #end The driver is not finished and is quite buggy. Currently
there is no support for hubs that are connected with high speed upstream
and low or full speed
Hi, I was just wondering how did you make BSD, how many people did it take you, and
how long it took to make? I want to see if I and a team of programmers has what its
got to make an OS one day.
Thanks
On 2004-10-19 07:26, Mike Jeays [EMAIL PROTECTED] wrote:
On Mon, 2004-10-18 at 19:39, Giorgos Keramidas wrote:
On 2004-10-18 19:25, Mike Jeays [EMAIL PROTECTED] wrote:
I have several Xlib programs that compiled successfully on earlier
versions of FreeBSD (4.1 and before), using xmkmf and
Sorry about the top posting but the person who replied to my question
was rejected( black listed by combined.njabl.org ) by our server and I
found his message below via the web archives.
In reference to the below message.
Putting IfDefine SSL instead of IfModule mod_ssl.c in my httpd.conf
which
On Mon, 18 Oct 2004 18:36:32 -0400, Frank J. Laszlo
[EMAIL PROTECTED] wrote:
I think evolution has a news reader. You might want to look into that.
Regards,
Frank
Yes evolution has a news reader and it works quite well for me. Have
had a few problems but it wasn't with evolution, it was
On Tue, Oct 19, 2004 at 03:44:33AM -0700, *NONE* wrote:
Hi, I was just wondering how did you make BSD, how many people did it
take you, and how long it took to make? I want to see if I and a team
of programmers has what its got to make an OS one day.
FreeBSD 1.0 was released in 1993. That was
*NONE* wrote:
Hi, I was just wondering how did you make BSD, how many people did it take you, and
how long it took to make? I want to see if I and a team of programmers has what its
got to make an OS one day.
Thanks
dick hoogendijk [EMAIL PROTECTED] writes:
I like rar for freebsd for the possibility to make predefined archive
sizes. If I tar a directory and want to burn it (later) to a cdr is it
possible with (free/OSS) tar to predefine such chunks? Or is there some
other utility to do this for me?
You
*NONE* [EMAIL PROTECTED] writes:
Hi, I was just wondering how did you make BSD, how many people did it
take you, and how long it took to make? I want to see if I and a team
of programmers has what its got to make an OS one day.
Not that I have a good answer to that one, but it might be that
I had sound working under FreeBSD 5.2.1 by using device pcm in my kernel
config file and now under 5.3 I cannot get it to work. The soundcard is
built into the MB. Not too sure of the type. How do I get it to work
with 5.3-*
___
[EMAIL PROTECTED]
On Oct 19, 2004, at 2:17 AM, Eirik Oeverby wrote:
On Tue, 2004-10-19 at 00:57 -0600, Chad Leigh -- Shire.Net LLC wrote:
On Oct 18, 2004, at 2:07 PM, Eirik Øverby wrote:
Adaptec AAC-2410SA 4-Port S-ATA RAID Controller
This one is gonna be tricky on you, I think.
Should work fine. I was using a
On Tuesday 19 October 2004 08:59, Joshua Tinnin wrote:
On Monday 18 October 2004 11:10 pm, Christopher Nehren
Hmph. Just a few days ago I was thinking about how Pan deserves a
1.0 version number because of its full feature set, stability, and
so forth. It's never crashed here, and I've
Thomas Moyer wrote:
I had sound working under FreeBSD 5.2.1 by using device pcm in my
kernel config file and now under 5.3 I cannot get it to work. The
soundcard is built into the MB. Not too sure of the type. How do I
get it to work with 5.3-*
I'm pretty sure this has been covered a
Hi all,
I have a FreeBSD 4.10 server running on one IDE disk. Now I installed a 2nd
disk which I want to use for RAID1 together with first disk.
My question is: How can I convert this setup to a software RAID1, without
rebooting the machine or something like that. Is this even possible?
I
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Tuesday 19 October 2004 16:13, Thomas Moyer wrote:
I had sound working under FreeBSD 5.2.1 by using device pcm in my kernel
config file and now under 5.3 I cannot get it to work. The soundcard is
built into the MB. Not too sure of the type.
On Tuesday 19 October 2004 05:40 am, Nelis Lamprecht wrote:
Hi,
I've recently just installed apache-2.0.52_1 from ports on a new
system. I've taken an already working configuration from an older
machine and transferred it to the new server. No matter what I do I
can't get SSL working even
On Tue, 2004-10-19 at 00:59 -0700, Joshua Tinnin wrote:
Really? What version of FreeBSD are you using, and what's your window
manager/desktop?
Currently, I'm using FreeBSD 5.3B7 with GNOME + XFce's window manager (I
happen to like window docking and some other features that Metacity will
I've been able to locate some postings that suggested there was an
effort to get SGI's XFS ported to FreeBSD -- along with some concerns
about licensing (GPL) issues.
I'd like to get more information - is there an official project, who's
heading it up, etc. etc.
Thanks.
Martes Wigglesworth wrote:
Greetings.
I have an issue with my mozilla install. I am unable to figure out how,
or what people get flash7 to work with mozilla. And I also have trouble
getting anything to work that I need, while maintaining a working
desktop. Hence, if I want to install mplayer, I
On Oct 18, 2004, at 10:18 PM, Vonleigh Simmons wrote:
Sorry to hijack the thread. My box is running 5.2, and I'd like to
upgrade it to 5.2.1. Problem is that the server is in a colo so I only
have SSH access to it; because of this I can't drop into single user
mode.
So far I grabbed the
Guys,
I am trying to decrease the amount of traffic going through my cable modem.
Presently, I have a FreeBSD 4.10 system acting as a gateway router. It runs
ipf/ipnat for filtering, and acts as a dhcp server to the internal network.
I also run ntpd, and have pointed all of my internal machines
Seth Henry writes:
I have seen a large number of HOWTO's on the web, but all seem to
assume that you want to propogate internal DNS info back
upstream.
Install Bind 9. (It's now the default for 5.x, don't know
about 4.x)
In the ARM (/usr/share/doc/bind9/arm), read section
On Oct 18, 2004, at 2:26 PM, stheg olloydson wrote:
--- Bart [EMAIL PROTECTED] wrote:
Actually, it would be connectivity + bandwidth + geography.
Some of the buildings are close together...close enough that you can
lean on the wall of one and throw a softball to hit the other.
Others are over 20
On Tue, Oct 19, 2004 at 03:01:43PM +0930, Ian Moore wrote:
Hi,
I'm trying to install php4 on a 4.6-Release machine. bison-1.75 is a
dependency it stops partway through compiling it.
Here is the output:
Making all in doc
makeinfo --no-split -I . `test -f 'bison.texinfo' || echo
On Monday 18 October 2004 23:06, Joshua Tinnin wrote:
I'm wondering how to remove a custom patch for a port. I am sort of
new at this, but I've managed to learn how to patch a port and
upgrade it for testing. But I'm not at all sure how to remove that
patch if need be. What I've been doing is
Hello,
Seth Henry wrote:
I want to run a private DNS server which is visible internally only.
Comcast doesn't like servers, so I don't want to broadcast any DNS
information upstream. (this would also be kind of dumb, as the entries
would point to non-routable addresses)
I also want to create a
Richard Bradley [EMAIL PROTECTED] writes:
Hi,
I want to run stream based commands like `sed` and `tr` on the contents of a
file, and save the results to the same file.
Obviously I can do this with a temporary file:
$sed s/dog/cat/ myanimals.txt tmp.txt
$mv tmp.txt myanimals.txt
I need to rebuild the exim-mysql port with ldap lookups
and am having trouble since I did a make install clean.
I can't do a make reinstall because I did the clean and
according to the handbook I have to do this:
# pkg_delete exim-mysql-4.42+27
Now when I go back into
Hi list,
Just having this question regarding an updated ports tree.
Should the INDEX file have the same size whether i do make index or make
fetchindex ?
make index gives me an INDEX of 5847753 Kb
make fetchindex returned and INDEX of 6020050 Kb
Thanks.
--
Ezequiel O. Block
Cooperativa La
On Mon, Oct 18, 2004 at 09:43:13AM -0500, Davon Shire wrote:
That said, I'd very much like to know where on the horizon do USB 2.0
highspeed drivers sit? I've seen that current is now into 6.0 but from what
I've read USB functionality is not even on the agenda.
Short answer: It doesn't work
On Tue, Oct 19, 2004 at 12:42:39PM -0300, Ezequiel O. Block wrote:
Hi list,
Just having this question regarding an updated ports tree.
Should the INDEX file have the same size whether i do make index or make
fetchindex ?
No, if you build it yourself you'll get an index customized for
On Tue, Oct 19, 2004 at 10:44:59AM -0500, terry tyson wrote:
On Tue, 19 Oct 2004 06:25:39 -0800, Andy Firman [EMAIL PROTECTED] wrote:
I need to rebuild the exim-mysql port with ldap lookups
and am having trouble since I did a make install clean.
snip
I don't know if this will solve
I'm trying to use a PHP form mail script
(http://www.leveltendesign.com/L10Apps/Fm/) to process data submitted
by a Web mail form.
The installation test completed successfully, and I moved the PHP file
into my Web site. Now, when I click the submit button, I'm brought to
the 'success' page, but
On 10/19/04 08:04 AM, Andy Firman sat at the `puter and typed:
On Tue, Oct 19, 2004 at 10:44:59AM -0500, terry tyson wrote:
On Tue, 19 Oct 2004 06:25:39 -0800, Andy Firman [EMAIL PROTECTED] wrote:
I need to rebuild the exim-mysql port with ldap lookups
and am having trouble since I
Hi to all:
I'm using 5.2.1. My logs show attempts to break into my system via ssh,
telnet, and ftp (I use strong passwords, thankfully) and so I'm
tightening security. I have run into a problem, however - I've set
things up so only two accounts can connect via ssh (telnet disabled
outside the
On Tuesday 19 October 2004 15:27, Dwayne MacKinnon wrote:
Martes Wigglesworth wrote:
Greetings.
I have an issue with my mozilla install. I am unable to figure out
how, or what people get flash7 to work with mozilla. And I also
have trouble getting anything to work that I need, while
Hi all
I have problem about keyboard
When I remotely reboot the server without keyboard
present, the keyboard is not function when I plug in
How can I make it working? The server automicatlly
detects the keyboard
Why this problem is not in linux?
Thank you
I would like to know if there is another way to configure my mouse. I have a Belkin
mini optical USB and a three button Belkin PS/2. Whenever I configure them by
selecting TYPE, PORT and then ENABLE, they both seem to work fine during the test.
However, when I start the X window desktop (KDE),
-Original Message-
From: cris rizzo [mailto:[EMAIL PROTECTED]
Sent: Tuesday, October 19, 2004 9:59 AM
To: [EMAIL PROTECTED]
Subject: mouse problems
I would like to know if there is another way to configure my
mouse. I have a Belkin mini optical USB and a three button
[I originally posted this to freebsd-ports, but figured this might be
a better place to ask since the website says freebsd-ports is for
discussion about the ports infrastructure, etc and freebsd-questions
is for user questions and technical support -- should have double
checked that first] :-/
I
I recently upgraded my existing Apache 1.3x server to Apache 2.0.52. I
changed nothing (that I recall) in my httpd.conf file. In 1.3x, I had
defined a virtual server to link to /usr/local/share/doc so I could
easily read my docs from what ever computer I was using at the time.
There was
Tom Connolly wrote:
Hello List,
I'm looking for a newsreader that has multi-server capabilities in that
it can piece together articles using different newsgroup servers.
Similar to NewsPro for windoze. Anyone had any luck with a good
newreader port for FreeBSD? I'm running FreeBSD 4.10 if that
Benjamin Walkenhorst [EMAIL PROTECTED] writes:
It does not have the multiserver-capabilities you describe, but
otherwise I like it a lot.
That can be worked around by using some sort of NNTP proxy, such as
leafnode or noffle (both quite simple to set up). That will also get rid
of the need for
I'm looking for a newsreader that has multi-server capabilities in that
it can piece together articles using different newsgroup servers.
Similar to NewsPro for windoze. Anyone had any luck with a good
newreader port for FreeBSD? I'm running FreeBSD 4.10 if that makes any
difference.
It
On Tue, 19 Oct 2004 15:51:28 +0100, Walker, Michael
[EMAIL PROTECTED] wrote:
I really didn't know that. At the moment I am using evolution for my mail
and mozilla as my news client.
How do you access the news client? I just had a quick look through the
Ximian online doc's and couldn't find
Does anyone know if v5.3 will have support for a SoundBlaster Audigy? Sound
is not an issue right now as I have a sound card on the motherboard, but it
has no built in gameport. And the gameport on my Audigy doesn't seem to work
right now with 5.2.1 (either that, or none of the games and
On Tue, 19 Oct 2004, Seth Henry wrote:
Guys,
I am trying to decrease the amount of traffic going through my cable modem.
Presently, I have a FreeBSD 4.10 system acting as a gateway router. It runs
ipf/ipnat for filtering, and acts as a dhcp server to the internal network. I
also run ntpd, and
On Tue, 19 Oct 2004 08:04:47 -0800
Andy Firman [EMAIL PROTECTED] wrote:
After pkg_delete, do I need to do some other sort of cleaning?
In case of ports that make use of OPTIONS, you might what to do a `make
rmconfig` if you what to choose other options; `make showconfig` will show
you the
On Mon, 18 Oct 2004 15:06:55 -0700
Joshua Tinnin [EMAIL PROTECTED] wrote:
I'm wondering how to remove a custom patch for a port. I am sort of new
at this, but I've managed to learn how to patch a port and upgrade it
for testing. But I'm not at all sure how to remove that patch if need
be.
-Original Message-
From: Spiral Eyed Girl [mailto:[EMAIL PROTECTED]
Sent: Tuesday, October 19, 2004 1:11 PM
To: [EMAIL PROTECTED]
Subject: 5.3 Audigy?
Does anyone know if v5.3 will have support for a SoundBlaster
Audigy? Sound
is not an issue right now as I have a sound card
I'm using Postfix and would like to artifically limit incoming connections
per minute to a certain value. We have ipf available. Postfix can be
configured to limit concurrent connections, but not connections per minute.
Has anyone gotten something like this working well with ipf? Pros/cons?
I am
On Tue, Oct 19, 2004 at 03:44:33AM -0700, *NONE* wrote:
Hi, I was just wondering how did you make BSD, how many people did it take you, and
how long it took to make? I want to see if I and a team of programmers has what its
got to make an OS one day.
The allow-recursion option would limit queries only to your lan. like this
options {
allow-recursion { 192.168.1.0/24; 127.0.0.1; };
};
Olaf Hoyer wrote:
On Tue, 19 Oct 2004, Seth Henry wrote:
Guys,
I am trying to decrease the amount of traffic going through my cable
modem. Presently, I
Why would I be getting:
# ifconfig fxp0 alias 200.46.204.9
ifconfig: ioctl (SIOCAIFADDR): File exists
when I know for a fact that it hasn't been configured?
# ping 200.46.204.9
PING 200.46.204.9 (200.46.204.9): 56 data bytes
^C
--- 200.46.204.9 ping statistics ---
1 packets transmitted, 0 packets
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of
Marc G. Fournier
Sent: Tuesday, October 19, 2004 12:28 PM
To: [EMAIL PROTECTED]
Subject: ifconfig alias: File Exists
Why would I be getting:
# ifconfig fxp0 alias 200.46.204.9
ifconfig:
Im looking for some suggestions on I/O performance.
I'm using FreeBSD 4.10-RELEASE on a Usenet transit server running
Diablo for the transit software.
I have 4 Seagate ST373435LC SCSI drives, 70GB each, and I am using
CCD to bind them together with RAID-0 stripes.
I can pull in anywhere from
On Tue, 19 Oct 2004, Kevin Glick wrote:
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of
Marc G. Fournier
Sent: Tuesday, October 19, 2004 12:28 PM
To: [EMAIL PROTECTED]
Subject: ifconfig alias: File Exists
Why would I be getting:
# ifconfig fxp0 alias
Hi,
On Tue, 19 Oct 2004, Marc G. Fournier wrote:
Why would I be getting:
# ifconfig fxp0 alias 200.46.204.9
ifconfig: ioctl (SIOCAIFADDR): File exists
when I know for a fact that it hasn't been configured?
you should use a netmask of 255.255.255.255 for ipv4 aliases.
ifconfig fxp0 alias
On Tue, 19 Oct 2004, Christian Kratzer wrote:
Hi,
On Tue, 19 Oct 2004, Marc G. Fournier wrote:
Why would I be getting:
# ifconfig fxp0 alias 200.46.204.9
ifconfig: ioctl (SIOCAIFADDR): File exists
when I know for a fact that it hasn't been configured?
you should use a netmask of 255.255.255.255
Hi,
I am trying to port minisip from linux to freebsd. The development team
builds using gcc v. 3.3 but I am using -CURRENT which has gcc 3.4 as
default. In the makefile I have specified USE_GCC= 3.3 - yet the source
is compiled with gcc 3.4.
On the other hand, I have tried to compile on -STABLE
Hi,
Ezequiel O. Block wrote:
The allow-recursion option would limit queries only to your lan. like
this
options {
allow-recursion { 192.168.1.0/24; 127.0.0.1; };
};
You can also say:
options {
...
listen-on { 192.168.0.1; 127.0.0.1; };
}; ^^^
(Or whatever
I'd like to update a server from 5.1-RELEASE-p10 to 5.3-STABLE...
What I'm wondering is: Are there any caveats to this upgrade?
One of my compadres asked me:
How stable is stable?
Isn't this the release where they change some value from an int16 to
an int32 and upgrading needs to be done with
Hello,
Does anyone have working examples of connecting two private networks
together via MPD?
Configuring MPD to do client/server VPN connections was fairly easy to
understand, after I discovered that the MTU should be set to 1300 for
Windows XP clients.
Thanks very much,
Joel Gudknecht
I have a rather old machine acting as a home server. According to dmesg
it has a:
--
atapci0: Intel PIIX WDMA2 controller port
0xffa0-0xffaf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 7.1 on pci0
--
However, both hard disks attached are running in PIO mode.
--
ad0: 4103MB ST34321A
On Tue, Oct 19, 2004 at 09:53:33PM +0200, Erik Norgaard wrote:
Hi,
I am trying to port minisip from linux to freebsd. The development team
builds using gcc v. 3.3 but I am using -CURRENT which has gcc 3.4 as
default. In the makefile I have specified USE_GCC= 3.3 - yet the source
is compiled
On Tue, Oct 19, 2004 at 04:32:59PM -0400, Glenn Sieb wrote:
I'd like to update a server from 5.1-RELEASE-p10 to 5.3-STABLE...
What I'm wondering is: Are there any caveats to this upgrade?
The anwser to this question is to long for me to write and its written
down in the handbook. Please
Alex de Kruijff said the following on 10/19/2004 5:38 PM:
The anwser to this question is to long for me to write and its written
down in the handbook. Please follow the instuctions in this chapter.
http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/cutting-edge.html
Danke, Alex--since
Kris Kennaway wrote:
You sure you're using an up-to-date ports tree? This was fixed a few
weeks ago.
Thanks! No, my ports tree was one month old.
Cheers, Erik
--
Ph: +34.666334818 web: www.locolomo.org
S/MIME Certificate:
On Thu, 07 Oct 2004 21:23:38 +0200, Alex de Kruijff wrote
On Thu, Oct 07, 2004 at 02:30:51PM -0400, Chuck Swiger wrote:
[EMAIL PROTECTED] wrote:
Please enlighten me. What way I should follow?
First, make sure you've updated your machine to the most recent
BIOS.
Next, check the BIOS
1 - 100 of 131 matches
Mail list logo
