Thanks a lot to Mr. Zbyslaw.
Being too lazy myself to fiddle with the soft limit via the
shell or bootloader, I did the following in the kernel build
config file:
options MAXDSIZ=(1024UL*1024*1024)
options DFLDSIZ=(1024UL*1024*1024)
This way, fsck works just fine.
To address
I'm trying to setup a Freebsd box to act as my router/firewall and as such I've
been trying to configure it to connect to my ISP's PPPoE dsl service. It
doesn't connect and the errors provided in the log prove don't show me much
content as to what is causing the problem. One thing strange is
in message [EMAIL PROTECTED], wrote Mike Jeays
thusly...
On Wed, 2005-06-08 at 20:58, .VWV. wrote:
I have a problem with ggv whilst trying to read pdf documents,
not ps documents [attachment]. Moreover, I would like to know
what's the best resource available to produce pdf or ps ones. Is
On Thu, 2005-06-09 at 02:42 -0400, Allyn Cheney wrote:
I'm trying to setup a Freebsd box to act as my router/firewall and as such
I've been trying to configure it to connect to my ISP's PPPoE dsl service. It
doesn't connect and the errors provided in the log prove don't show me much
content
Hello,
i have a question regarding to redundant ethernet interfaces support in FreeBSD
(we need adapter fault tolerance).
Our system has two ethernet interfaces, each is connected to different switch
for high availability reasons. Currently we use netgraph FEC module for this
task, however it
On Jun 08 at 17:42, Jos de Paula Rodrigues spoke:
Did you try using Grub instead? It now supports UFS2, and is a great
bootloader, with lots of features. You can find it in your ports tree.
Grub is heavy. The FreeBsd boot selector is much more efficient. It
is more suited for an old laptop.
I am currently out of office please contact my colleague Sylvester for anything
that requires immediate attention.
Your mail has not been forwarded or redirected.
Regards
___
freebsd-questions@freebsd.org mailing list
Frantisek Rysanek wrote:
Thanks a lot to Mr. Zbyslaw.
You're welcome.
A local friend has suggested to increase the block size to
newfs, or something along those lines - essentially to
decrease the FS overhead and the size of the blockmap.
I haven't tried that but I guess it sounds
Hi all,
we are using FreeBSD 5.4 with some jails.
One of this jail is on a NFS directory - I mean: the whole filesystem of
this jail is on a remote directory, exported by a FreeBSD 5.4 server with
NFS, and the 'host' system (the one that started and stopped the jail)
mounts it via NFS. In this
Hi all.
Need to setup icq server under freebsd and have no experience with that.
Thank's for any advise.
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL
At 02:26 AM 6/9/2005, Anton Butsyk wrote:
Hi all.
Need to setup icq server under freebsd and have no experience with that.
jabberd should be able to do that for you. It's in ports:
/usr/ports/net/jabberd
-Glenn
Thank's for any advise.
___
I've used yp in FBSD for some time now. I've never ran across this
particular issue though, until now.
My layout.
I have a 4.10 yp master server. I have various servers linked to it
including other fbsd 5.3 servers. They do well. However, I have one
inparticular server that simply will not
Nevermind folks. I'm feeling pretty stupid right now. The problem was
starting me right in the face and I totally missed it.
Just an FYI, the # in the #$FreeBSD: src/etc/group,v 1.31 2004/06/23
01:32:28 mlaier Exp $ line in the /etc/group file is a *VERY* important
thing. The affected gid was
On Tue, Jun 07, 2005 at 01:50:30PM +0300, Giorgos Keramidas wrote:
We'd have to see the entire ruleset and a tcpdump of traffic that passes
through to know what's wrong.
- Giorgos
Here are the rules as taken from pfctl -sr. I can also provide a copy of
pf.conf, if needed. The user's host
Hi,
Today and yesterday I had a freeze of my production FreeBSD server at
exactly 11:18
I don't have any logs or crash dumps. Where can I look further to examine
the freezes?
I think it too coincidentaly that both freezes have occured at the same
time. At the time there's not any crontab line
On 2005-06-09 03:18, Matt Rechkemmer [EMAIL PROTECTED] wrote:
On Tue, Jun 07, 2005 at 01:50:30PM +0300, Giorgos Keramidas wrote:
We'd have to see the entire ruleset and a tcpdump of traffic that passes
through to know what's wrong.
- Giorgos
Here are the rules as taken from pfctl -sr.
On Thu, 9 Jun 2005 12:38:38 +0200 (CEST)
Frank [EMAIL PROTECTED] wrote:
Today and yesterday I had a freeze of my production FreeBSD server at
exactly 11:18
I don't have any logs or crash dumps. Where can I look further to
examine the freezes?
I think it too coincidentaly that both freezes
Hello freebsd-questions,
subj.
I must setting up PDC: unix server and win-clients. But samba not
compiling =(
Samba 3.0.14a (and trying with 3.0.13)
krb5-1.3.4_2
openldap-2.2.15 with sasl
uname -a
FreeBSD freebsd53.localdomain 5.3-RELEASE FreeBSD 5.3-RELEASE #0: Fri Nov 5
04:19:18 UTC 2004
Try this
start of DSL ppp.conf ###
default:
set log Phase tun #use to avoid excessive log sizes
set timeout 0 # no idle time out, will not disconnect
dialisp:
set device PPPoE:XXX # replace xxx with your NIC device
name
set
Hello freebsd-questions,
subj.
I must setting up PDC: unix server and win-clients. But samba not
compiling =(
Samba 3.0.14a (and trying with 3.0.13)
krb5-1.3.4_2
openldap-2.2.15 with sasl
uname -a
FreeBSD freebsd53.localdomain 5.3-RELEASE FreeBSD 5.3-RELEASE #0: Fri Nov 5
04:19:18 UTC 2004
I am very dissappointed. I have been looking on the net for 3 days now
looking for easy setup guides or How to guides and setting up FreeBSD 5.x
with transparent proxy and firewall and there simply is no easy way
explaining to beginners how to do such a setup. No wonder that most people
still
I am very dissappointed. I have been looking on the net for 3 days now
looking for easy setup guides or How to guides and setting up FreeBSD 5.x
with transparent proxy and firewall and there simply is no easy way
explaining to beginners how to do such a setup. No wonder that most people
Hello,
I recently installed postgresql 8.0 on FreeBSD 5.4 and I've noticed the
following message in the daily run output:
vacuuming...
Password:
vacuumdb: could not connect to database template1: fe_sendauth: no password
supplied
Errors were reported during vacuum.
I know how to fix the
On Jun 9, 2005, at 7:36 AM, dk dkrules wrote:
I am very dissappointed. I have been looking on the net for 3 days now
looking for easy setup guides or How to guides and setting up FreeBSD
5.x with transparent proxy and firewall and there simply is no easy
way explaining to beginners how to do
Try /usr/ports/x11/kde3 and take a look at the Makefile, it
explains how to cancel out various options/components of kde
during the install.
Eric
* Eric Kjeldergaard [EMAIL PROTECTED] [050609 00:13]:
On 6/8/05, Alvaro Rosales [EMAIL PROTECTED] wrote:
Hello Folks, I am trying to isntall KDE3
Hello,
I don't know exactly if different ISP need different configuration, but
the following minimal configuration worked always for me:
# cat /etc/ppp/ppp.conf
myisp:
set device PPPoE:interface
set log Phase IPCP CCP Warning Error Alert
add! default HISADDR
set authname name
set
On Thursday 09 June 2005 06:45, Jerry McAllister wrote:
I am very dissappointed. I have been looking on the net for 3 days now
looking for easy setup guides or How to guides and setting up FreeBSD 5.x
with transparent proxy and firewall and there simply is no easy way
explaining to
On Jun 9, 2005, at 8:39 AM, Lane wrote:
As you can see, comparison with MS is not likely to get you any
constructive
input :) Sorry, that's the nature of the BSD!
Ya' think?
Is it EVER effective to basically say I'm used to X, Y is different
and I'm not used to it, so Y sucks?
Just be sure that you've cvsup'ed your ports tree in its entirety and done
a make clean before attempting to build from ports. If it fails then,
post to the list and we'll see what is up.
On Wed, 8 Jun 2005, Eric Ekong wrote:
It looks like we will have the maintainer to update the port. I
Hello.
I need fixing in mysql database sshd events: some user try to
loggin in from ip xxx.xxx.xxx.xxx and use account xxx. But my
/var/log/auth.log has not nessesary information (for example: if
I put some users into AllowGroups, in logs I can read something
like this: User xxx not allowed
Hi folks,
I'm trying to implement some changes[1] to my sendmail setup. I'm in
/etc/mail and I've done a make. This created my HOSTNAME.mc file. I
added my changes to the bottom of that file. I did a make and a make
install. When I start sendmail, I see this:
# /usr/sbin/sendmail -L
Lane wrote:
I don't know the concept transparent proxy. Hopefully you will discover
how that works as you build your firewall :)
I'm not sure if he meant something like Microsoft's all-in-one
filtering, authentication, caching, whatever product called Internet
Security and Acceleration
On 2005-06-09 08:59, Bart Silverstrim [EMAIL PROTECTED] wrote:
On Jun 9, 2005, at 8:39 AM, Lane wrote:
I don't know the concept transparent proxy. Hopefully you will
discover how that works as you build your firewall :)
I think a transparent proxy is a proxy that your users didn't know
they
On 9 Jun 2005 at 9:46, Alex Zbyslaw wrote:
A local friend has suggested to increase the block size
It ought also make sense if you are serving up *large* files (didn't you
say video/audio?).
...
I don't have anything on your scale (23Gb
of document database pales into insignificance
On Wed, 2005-06-08 at 13:12 +1000, Warren wrote:
I have been trying to update Azureus but each time i d/l the file to update
with and click restart form the updater section/window it never restarts and
then when i re-load the program it sais to check update.log which ironically
dosent exist
I have created a Jumpstart server using the guide located at
http://www.freebsd.org/doc/en_US.ISO8859-1/articles/pxe/index.html
I am trying to set configure settings in rc.conf using a post-install
script that is installed using a custom created package.
However, it seems that when the machine
On 6/8/05, John Brooks [EMAIL PROTECTED] wrote:
I am running a FreeBSD server behind a Linksys Wireless Access
Point / Router (BEFW11S4). Its local address is 192.168.1.1. The
Linksys is attached to a DSL modem. In my /etc/rc.conf file I have
defaultrouter=192.168.1.1
which works most
On 9 Jun 2005 at 9:20, Dan Langille wrote:
Hi folks,
I'm trying to implement some changes[1] to my sendmail setup. I'm in
/etc/mail and I've done a make. This created my HOSTNAME.mc file. I
added my changes to the bottom of that file. I did a make and a make
install. When I start
su-2.05b# uname -r
4.11-STABLE
Hardware specs:
MB(+case): Supermicro 5013S-i (details about chipset on it:
http://www.supermicro.nl/products/system/1U/5013/SYS-5013S-i.cfm)
Proc: Xeon 2.0ghz 512kb 533fsb
IO controller: 3ware 7000-2
Memory: 1gig DDR ECC REG PC2100
That should cover the most
When i run ./configure to install netperf i get this error:
failed to get size of sin_port in struct sockaddr_in.
What can i do to solve this?
Pleas someone help me! I reaaly need to do this works fast!
João Gabriel Sapucahy Chiste
___
Hi,
We're building out brand new dual Opteron box to run our public access unix
site. We're running FreeBSD 5.4 and a 3Ware Escalade 7506-4LP. We are
having difficulties with the system, and any help you can offer would be
greatly appreciated.
For the most part, everything behaves fine.
I'm not claiming this will fix your issue, but are you running the
absolute latest kernel sources? There is the possibility this issue has
been resolve in a newer kernel.
cvsup your sources and try doing a build. See what happens.
On Thu, 9 Jun 2005, Steve Richardson wrote:
Hi,
We're
are the dns servers of the other computers the SAME as the freebsd
server? what are the contents of /etc/resolv.conf?
--
John Brooks
[EMAIL PROTECTED]
Thank you John.
I will try this series of pings the next time my server freezes. I did
try something similiar, if not so methodical last
Hi,
I hope this is the right place to send this question.
I have two HDs here, the second is where my FreeBSD is
installed,
in the first I used to have Windows, but I tried to
make it dual-boot and it became unbootable
(unmountable_boot_drive is their error). I tried using
their tools to recover
Hello,
I recently installed postgresql 8.0 on FreeBSD 5.4 and I've noticed the
following message in the daily run output:
vacuuming...
Password:
vacuumdb: could not connect to database template1: fe_sendauth: no password
supplied
Errors were reported during vacuum.
I know how to fix the
Can anyone here recommend a trackball and/or graphics tablet for FBSD?
Gotta get away from the Synaptics touchpad, it's too slow for me, so
looking to get a trackball for general use, and as I dabble on Gimp I'd
like to get hold of a tablet as well.
Only restriction is that it has to be
Hi List,
I have just installed imap-uw from ports, but when i try to read mail
using Mozilla, imapd crashes:
Jun 9 16:01:06 antsrv1 imapd
Jun 9 16:01:06 antsrv1 in free():
Jun 9 16:01:06 antsrv1 error:
Jun 9 16:01:06 antsrv1 chunk is already free
Jun 9 16:01:06 antsrv1 kernel:
Hi all. Hope that subject made sense. I am trying to submit a new port with
send_pr. Almost ready to go but where do I include the output of the shar
command in the bug report? I am reading the Quick Porting section of the
porter's handbook. It states:
simply include the output of shar `find
Hello again, List! It has been many months since my last
confession, er, POST. :)
My question. Generally, what is the easiest way to reinstall
XFree86 to a 5.2-RELEASE working system? Is there a separately-
hosted ports area, other than current? Thanks very much.
--
Peter Leftwich, Founder
--On Thursday, June 09, 2005 11:26:06 -0300 João Gabriel Sapucahy Chiste
[EMAIL PROTECTED] wrote:
When i run ./configure to install netperf i get this error:
failed to get size of sin_port in struct sockaddr_in.
What can i do to solve this?
cd /usr/ports/benchmark/netperf
make install
I'm having an error in the 'install' phase of the
port. It builds without errors.
I updated each and every dependancy this port has to
the latest version as of 09 June 2005 (today).
The part of the log that contains the error is below.
Should the full build and install log be necesary i
can
--On Thursday, June 09, 2005 11:11:45 -0400 [EMAIL PROTECTED]
wrote:
Hi all. Hope that subject made sense. I am trying to submit a new port
with send_pr. Almost ready to go but where do I include the output of the
shar command in the bug report? I am reading the Quick Porting section of
the
Hi everyone
I have a box, a FreeBSD 5.3-release whit qmail version 1.03 and the
SPAMCONTROL patch 2.3.11, all have worked fine, but since a few days i cant
connect to several random mail servers. i have a cisco gateway that hasnt
changed any config.
One of my qmail log message is this:
On Thursday 09 June 2005 10:18, [EMAIL PROTECTED] wrote:
Hi everyone
I have a box, a FreeBSD 5.3-release whit qmail version 1.03 and the
SPAMCONTROL patch 2.3.11, all have worked fine, but since a few days i cant
connect to several random mail servers. i have a cisco gateway that hasnt
Could someone give me a quick hint on switching from automake14 to
automake19 using the ports tree without wreaking total havock on
dependencies? :)
Thanks.
___
freebsd-questions@freebsd.org mailing list
In the last episode (Jun 09), Tony Shadwick said:
Could someone give me a quick hint on switching from automake14 to
automake19 using the ports tree without wreaking total havock on
dependencies? :)
The numbered auto* ports install into separate directories, so there is
nothing to be done.
On 2005-06-09 11:01, Tony Shadwick [EMAIL PROTECTED] wrote:
Could someone give me a quick hint on switching from automake14 to
automake19 using the ports tree without wreaking total havock on
dependencies? :)
If you are asking what portupgrade will do with the installed ports,
then there's
No, I was referring to the fact that I ran portupgrade on automake14 and
it complains and says that it is deprecated and strongly encourages using
automake19 instead. I was curious if I just deleted the automake14 port
and installed automake19 if I would be wreaking havoc on my dependencies
On 2005-06-09 11:14, Tony Shadwick [EMAIL PROTECTED] wrote:
No, I was referring to the fact that I ran portupgrade on automake14
and it complains and says that it is deprecated and strongly
encourages using automake19 instead. I was curious if I just deleted
the automake14 port and installed
On Thu, 9 Jun 2005, dk dkrules wrote:
I am very dissappointed. I have been looking on the net for 3 days now
looking for easy setup guides or How to guides and setting up FreeBSD 5.x
with transparent proxy and firewall and there simply is no easy way
explaining to beginners how to do such a
In the last episode (Jun 09), Giorgos Keramidas said:
On 2005-06-09 11:01, Tony Shadwick [EMAIL PROTECTED] wrote:
Could someone give me a quick hint on switching from automake14 to
automake19 using the ports tree without wreaking total havock on
dependencies? :)
If you are asking what
Hello,
I've got clamav installed on a 5.4 box and i'm trying to use it to do
demand scanning of a windows XP machine. I'm atempting to mount the system's
C$ share, but although it shows up in the listing of smbclient -L
//SystemName -N atempting to mount it via mount_smbfs
mount_smbfs //[EMAIL
On Thu, Jun 09, 2005 at 08:14:59AM -0700, Peter Leftwich wrote:
Hello again, List! It has been many months since my last
confession, er, POST. :)
My question. Generally, what is the easiest way to reinstall
XFree86 to a 5.2-RELEASE working system? Is there a separately-
hosted ports
On Thu, Jun 09, 2005 at 08:25:38AM -0700, Cristian Sirbu wrote:
I'm having an error in the 'install' phase of the
port. It builds without errors.
I updated each and every dependancy this port has to
the latest version as of 09 June 2005 (today).
The part of the log that contains the error
On 2005-06-09 11:27, Dan Nelson [EMAIL PROTECTED] wrote:
In the last episode (Jun 09), Giorgos Keramidas said:
On 2005-06-09 11:01, Tony Shadwick [EMAIL PROTECTED] wrote:
Could someone give me a quick hint on switching from automake14 to
automake19 using the ports tree without wreaking total
Hello List,
I am running FreeBSD-5.4 on my r51,
While partially following (no ciso here),
http://www.expresshosting.net/howto/VLAN-802.1q-Tagging-in...
I sucessfully created vlan-devices and thought it to be a good idea,
to give each of them a different MAC-address.
now maybe that's
I already have downloaded netperf. I need to run configure before
compile.
But i got that error.
You have installed netperf before?
Em 09/06/2005, às 12:23, Paul Schmehl escreveu:
--On Thursday, June 09, 2005 11:26:06 -0300 João Gabriel Sapucahy
Chiste [EMAIL PROTECTED] wrote:
When i run
João Gabriel Sapucahy Chiste wrote:
I already have downloaded netperf. I need to run configure before compile.
But i got that error.
You have installed netperf before?
He is suggesting that you install it from the ports tree, rather than
downloading the source and compiling it.
--Tim Erlin
Hi,
I'm trying out FreeBSD on a side computer that I eventually want to
use as a small home server. I was planning on purchasing a PCI SATA
adapter card and an SATA drive, to complement the hard drive already
inside the computer. My question is: should I wait until the
additional hardware is
Hi all -
Our company has a product such that a small server is installed at
each customer site. This server dials up to the Internet every night and
exchanges some content with a central server in our data center. Total
transaction takes about 5 minutes.
Customers can have multiple sites.
I don't have a internet connection on this machine...
But i think if i install using ports i will get the same error that i
get compiling, don't you think?
Em 09/06/2005, às 14:26, Tim Erlin escreveu:
João Gabriel Sapucahy Chiste wrote:
I already have downloaded netperf. I need to run
Freebsd 5.4 kernel supports a wide variety of SATA controllers and it should
have no problems detecting it on startup, provided you have the appropriate
kernel config directives installed. But check the hardware compatibility list
to make sure, remember to look at the chipset controller and
Check the partition with fsck_msdosfs. If you still can't mount it with
mount_msdosfs then I guess you can't mount it with -f too. Just try it.
By the way, a FAT32 file system is the worst place to store important data.
Björn
___
[EMAIL PROTECTED] wrote:
Do drives like the nec 3520 dvd-r,rw,... work ok under freebsd 4.x (9 or 10)
as well as growisofs or do they require the 5.x branch?
FWIW, I recently procured a nice Sony DVD+RW off Amazon.com for about
$120 or so. Works like a charm in FreeBSD 4.x but you'll want
On Thursday 09 June 2005 10:38, Philip Hallstrom wrote:
Hi all -
Our company has a product such that a small server is installed at
each customer site. This server dials up to the Internet every night and
exchanges some content with a central server in our data center. Total
I put the netperf-2.4.0.tar.gz in the location that ports telling and
tried to install from ports and then i get this:
applying freebsd patchesblabla
File to patch:
Which file should i type?
Em 09/06/2005, às 14:26, Tim Erlin escreveu:
João Gabriel Sapucahy Chiste wrote:
I already have
On Thursday 09 June 2005 11:28 am, dave wrote:
Hello,
I've got clamav installed on a 5.4 box and i'm trying to use it
to do demand scanning of a windows XP machine. I'm atempting to mount
the system's C$ share, but although it shows up in the listing of
smbclient -L //SystemName -N
James Bowman Sineath, III wrote:
James,
You should send messages to the list directly. When you start your
question by hitting reply to a question about shell accounts, your
message will be lumped under there in a lot of mail clients, and is less
likely to be see.
I have the following
Hi,
No one else has seem this?
I upgraded to 5.4 and the problem was kept.
Should it be a problem with ICH5 driver?
On Tue, 7 Jun 2005 [EMAIL PROTECTED] wrote:
|Hi ALL,
|
| I hope it´s not a known issue.
| I´ve installed (express) a FreeBSD 5.3 (I know it´s
On Jun 9, 2005, at 9:12 AM, Eugene M. Minkovskii wrote:
I put some users into AllowGroups, in logs I can read something
like this: User xxx not allowed because none of user's groups
are listed in AllowGroups, and I can't see from what IP I got
this request.)
OK. Consider something like (watch
--On Thursday, June 09, 2005 14:17:34 -0300 João Gabriel Sapucahy Chiste
[EMAIL PROTECTED] wrote:
I already have downloaded netperf. I need to run configure before compile.
But i got that error.
You have installed netperf before?
No, but I've installed a *ton* of apps from ports, and I'm a
--On Thursday, June 09, 2005 15:10:11 -0300 João Gabriel Sapucahy Chiste
[EMAIL PROTECTED] wrote:
I put the netperf-2.4.0.tar.gz in the location that ports telling and
tried to install from ports and then i get this:
applying freebsd patchesblabla
File to patch:
Which file should i type?
On Jun 9, 2005, at 11:14 AM, Peter Leftwich wrote:
My question. Generally, what is the easiest way to reinstall
XFree86 to a 5.2-RELEASE working system? Is there a separately-
hosted ports area, other than current? Thanks very much.
5.2? You would probably be happier downloading the 5.4
It has to be something with the PPP config stuff, I followed everyones advice
and it still refuses to actually get a connection to my isp. If i type ppp
-ddial isp it shows the interface as up in ifconfig but no ip information. If i
just do ppp then dial isp it doesn't show the connection tun0
We can also provide this sort of thing for you, but it won't be anywhere
near as cheap as the single ISP account you're using. We have to allow
enough lines for simultaneous connections. The good news is that it is
overnight, and you are correctly staggering the connections, then it might
On 6/9/05, Joel Arakaki [EMAIL PROTECTED] wrote:
Hi,
I'm trying out FreeBSD on a side computer that I eventually want to
use as a small home server. I was planning on purchasing a PCI SATA
adapter card and an SATA drive, to complement the hard drive already
inside the computer. My
Thank you, I wasn't aware that it did that.
Your response was my first impression as well, however I looked at it
further and I don't believe that is the case. When I have log first in my
other rules, it rarely takes effect. I used it to cut down on the number of
logs produced, but it only
If anyone has had any experience with any of the SATA RAID controllers below
I would be interested. Not just whether you got them working but also if the
performance is what you expected and how feature rich they are. Anybody out
there dual booting FreeBSD with Windows or Linux and using any of
On 6/9/05, [EMAIL PROTECTED] [EMAIL PROTECTED] wrote:
Hi,
No one else has seem this?
I upgraded to 5.4 and the problem was kept.
Should it be a problem with ICH5 driver?
On Tue, 7 Jun 2005 [EMAIL PROTECTED] wrote:
Please bear with me, I just can't figure out
I posted this topic a few days ago but still haven't found a solution yet.
However, I believe I'm able to provide more information now. Here is a log
showing what I'm up against:
vitoc# pwd
/usr/temp/cpp
vitoc# ls
test.cpp
vitoc# cat test.cpp
#include iostream
using namespace std;
int main()
Dmitry,
Both situations have the same result, an Slave IDE HDD on primary
controller, or a master HDD on the 2nd IDE controler, works much more
slow, testing with 'dd'.
I couldn't see that with diskinfo.
- Marcelo
On Thu, 9 Jun 2005, Dmitry Mityugov wrote:
|On 6/9/05, [EMAIL
I'm running 5.4 on my shiny new dell inspiron 6000 - there are a few
things yet to sort out, and one of them is X. Amazing. In winxp it
runs at 1280x800, 16bit (I think, or 24? can't remember off-hand, i'd
be happy with 8 for the moment!). And it seems I need the i810
Generic driver from
I'm a programmer but i'm still not compiled this stuff
I`m on a Lan with a DHCP server and i can ping but the DNS names are
not configured i put them in resolv.conf but don't worked.
When i run dhclient i get an ip address, but i get this message addres
family not supported by protocol
In the last episode (Jun 09), Keyser said:
I posted this topic a few days ago but still haven't found a solution
yet. However, I believe I'm able to provide more information now.
Here is a log showing what I'm up against:
vitoc# cat test.cpp
#include iostream
using namespace std;
int
--On Thursday, June 09, 2005 17:12:39 -0300 João Gabriel Sapucahy Chiste
[EMAIL PROTECTED] wrote:
I'm a programmer but i'm still not compiled this stuff
I`m on a Lan with a DHCP server and i can ping but the DNS names are not
configured i put them in resolv.conf but don't worked.
When i
hello mi name is joseph and i wanna know how can i get the questions that we
make here, like a forum, don´t know.
h
thank u
__
Correo Yahoo!
Espacio para todos tus mensajes, antivirus y antispam ¡gratis!
Regístrate ya -
Should i enable ipv6?
i see a inet6 address when i give ifconfig. It's that enough?
Em 09/06/2005, às 17:21, Paul Schmehl escreveu:
--On Thursday, June 09, 2005 17:12:39 -0300 João Gabriel Sapucahy
Chiste [EMAIL PROTECTED] wrote:
I'm a programmer but i'm still not compiled this stuff
I`m
--On Thursday, June 09, 2005 17:28:14 -0300 João Gabriel Sapucahy Chiste
[EMAIL PROTECTED] wrote:
Should i enable ipv6?
i see a inet6 address when i give ifconfig. It's that enough?
No, not unless your network uses it, which is unlikely.
It's normal for ifconfig to report the ipv6 address
i have a problem resolving names
when i give ping www i get host name lookup failure
and when i run dig i get connection refused
Em 09/06/2005, às 17:32, Paul Schmehl escreveu:
--On Thursday, June 09, 2005 17:28:14 -0300 João Gabriel Sapucahy
Chiste [EMAIL PROTECTED] wrote:
Should i
João Gabriel Sapucahy Chiste wrote:
i have a problem resolving names
when i give ping www i get host name lookup failure
and when i run dig i get connection refused
Can you ping the DNS server by IP?
--Tim Erlin
Em 09/06/2005, às 17:32, Paul Schmehl escreveu:
--On Thursday, June 09,
1 - 100 of 160 matches
Mail list logo
