Re: RAID1 and FreeBSD

2005-07-11 Thread Casey Scott
On Sunday 10 July 2005 05:21 pm, Ceasar Navato wrote: Good day. Please help. I have a motherboard that has a SATA RAID support. I enabled it and configured the RAID using RAID1 through the BIOS. My question is, do I also have to configure RAID1 in FreeBSD so that it automatically

Re: problem with vasftpd server

2005-07-11 Thread vladone
Now work. I can login and upload files without any problem. But now i want to permit and anonymous connections, without upload, to same directories that have acces with login users. When i try to login anonymously receive this: 500 OOPS: vsftpd: refusing to run with writable anonymous root

Re: Sporadical NFS errors with NetApp backend (solved)

2005-07-11 Thread Lars Köller
-- Hello, alas I get not response to my question, but some more googling and testing leads to a solution. With the following mount options all runs well: tcp,rw,bg,dumbtimer,-r=32768,-w=32768 the most important thing is to not use any of the following intr or soft it seems

FreeBSD 5 - What Options for SMP Kernel?

2005-07-11 Thread Drew Tomlinson
I just built my first 5.4-RELEASE system. I want a SMP kernel. The GENERIC kernel conf file contains this line: device apic# I/O apic According to NOTES, this is all that's required to build an SMP kernel. However my dmesg does not indicate that both processors

Re: FreeBSD 5 - What Options for SMP Kernel?

2005-07-11 Thread Nelis Lamprecht
On 7/11/05, Drew Tomlinson [EMAIL PROTECTED] wrote: I just built my first 5.4-RELEASE system. I want a SMP kernel. The GENERIC kernel conf file contains this line: device apic# I/O apic According to NOTES, this is all that's required to build an SMP kernel.

Who can help me with ISO's

2005-07-11 Thread Gavin McDougall
Hi there, I am based in Johannesburg, South Africa and would like to know if there is anyone lurking in this list that could help me with making copies of the FreeBSD 5.4 ISO's. We suffer serious telecoms (bandwidth) disabilities in this country so its a bit of a mission downloading these

Re: Who can help me with ISO's

2005-07-11 Thread Mantas Smelevicius
u can purchase all CD's at http://www.bsdmall.com/ On 7/11/05, Gavin McDougall [EMAIL PROTECTED] wrote: Hi there, I am based in Johannesburg, South Africa and would like to know if there is anyone lurking in this list that could help me with making copies of the FreeBSD 5.4 ISO's. We

qopper-drac-sendmail

2005-07-11 Thread Fatman
HI! Everything is installed, but, when i try to send mail to outbox i receive this error /drac map not found/. thkx! ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any

Re: Who can help me with ISO's

2005-07-11 Thread Nelis Lamprecht
On 7/11/05, Gavin McDougall [EMAIL PROTECTED] wrote: Hi there, I am based in Johannesburg, South Africa and would like to know if there is anyone lurking in this list that could help me with making copies of the FreeBSD 5.4 ISO's. We suffer serious telecoms (bandwidth) disabilities in

Connecting IPSec from Behind a gateway

2005-07-11 Thread FreeBSD MailingLists
I am trying to connect 2 FreeBSD 5.4 boxes with an IPSec tunnel using racoon. The problem is the second box is behind a nat'd gateway. The gateway router is a commercial box with IPSEC Passthrough enabled. What do I need to do to get this to work? Which IP (global or private) should I use when

About:gmake

2005-07-11 Thread zhoumin
Hi,my name is zhoumin. I installed the package―gamke-3.80_2.tbz on freebsd 4.7.But the command still can't run.I got this error message: ELF interpreter /libexec/ld-elf.so.1 not found, but I found the file in that directory--/usr/libexec. Could you give me any suggestion?

Expire undeleted mail older than specified age

2005-07-11 Thread Ann Lee
Hi , Does anyone know how could I make expire_age - Expire undeleted mail older than specified age in freebsd v4.8..Any quick command that I can run to delete off for unread messages for /var/mail/root. Coz I would like to do a rotation job to auto-housekeeping my mail folder. Thanks in advance.

Re: adding unused disk space for FreeBSD

2005-07-11 Thread Igor Robul
Ean Kingston wrote: On July 9, 2005 11:07 am, you wrote: Thanks, Ean, for your reply. I tried it as you proposed. The problem is that when it comes to saving the changes the following message pops up: 'ERROR: Unable to write data to disk ad4!' GEOM(4) prevent direct write to disk

Re: 6.0-SNAP005: pptpclient; mpd/ng; pf; tcpdrop; vidcontrol/saver; gbde/md

2005-07-11 Thread Igor Robul
Ab Normal wrote: I've installed FreeBSD 6.0-CURRENT-SNAP005 (i386) on my stand-alone home computer, which connects to the internet via adsl. -CURRENT is development branch of FreeBSD and may be not very stable. Also it has many debuging options turned on (read /usr/src/UPDATING) so you may

Re: Per disk quota

2005-07-11 Thread Igor Robul
Alexandre D. wrote: Hi guys, I'm searching for a way to set a limit per directory. for example: directory limit /web/dir1 1Go /web/dir2 10Mo /web/dir3 100Mo /web/dir4 175Mo This system would be used by only one program

Re: DSL setup

2005-07-11 Thread Yance Kowara
--- Lowell Gilbert [EMAIL PROTECTED] wrote: Jake Kim [EMAIL PROTECTED] writes: I just installed FreeBSD 5.4 and am having problems setting up DSL. I followed the instructions in the handbook, but nothing worked. Do I have to configure something else other than ppp.conf? Let's back

Aironet 32-bit CardBus Adapter not attached

2005-07-11 Thread Grigory Klyuchnikov
Hello, I have Cisco Aironet 32-bit CardBus Adaptor AIR-CB21AG-A-K9. When I attach it to the notebook with FreeBSD 5.4, the following message appears on the console: kernel: cardbus0: network, ethernet at device 0.0 (no driver attached) The kernel config has options: # PCMCIA and cardbus

Create and remove symbolic link in system start up and shutdown

2005-07-11 Thread yoke an
Hi , Does anyone know how to create remove a symbolic link in the system start up and system shutdown? ie: (i'm using 3rd party sendmail that store in /opt/test/sendmail folder and create a symbolic link to start this sendmail in the system start up) # ln -s

Re: Create and remove symbolic link in system start up and shutdown

2005-07-11 Thread Igor Robul
yoke an wrote: Hi , Does anyone know how to create remove a symbolic link in the system start up and system shutdown? ie: (i'm using 3rd party sendmail that store in /opt/test/sendmail folder and create a symbolic link to start this sendmail in the system start up) # ln -s

Re: Connecting IPSec from Behind a gateway

2005-07-11 Thread Ivailo Tanusheff
As far as I know it's not possible to make IPSec when you use NAT, as IP address is used with crypto. But you can make PPP or PPTP tunel between those two hosts and use IPSec between addresses in the tunel. Ivailo Tanusheff Senior System administrator ProCredit Bank (Bulgaria) AD tel. +359 2

Re: Suspend-to-disk resuming

2005-07-11 Thread Fabian Keil
Ben Jencks [EMAIL PROTECTED] wrote: I'm trying to get suspend-to-disk (S4OS) working. (S3 doesn't work, but I'll worry about that later). When I run acpiconf -s 4, it appears to suspend ok. However, when I boot the computer, it just boots as normal, rather than resuming (it does complain

[EMAIL PROTECTED] resending ancient mail to lists

2005-07-11 Thread Marc Olzheim
For more than about a month now, I keep seeing ancient messages to several FreeBSD mailing lists resent from [EMAIL PROTECTED] I think something is wrong with [EMAIL PROTECTED]'s mail system... Perhaps a temporary block on mail via [EMAIL PROTECTED] could stop this ? I attached an example with

Re: Electrical circuits simulator

2005-07-11 Thread Andrey Simonenko
On Thu, Jul 07, 2005 at 09:04:20PM +0530, ??? (Shantanoo) wrote: On 7/7/05, Andrey Simonenko [EMAIL PROTECTED] wrote: Hello all, What do you recommend to use for electrical circuits simulating? I need such software for educational purposes. I found Oregano in ports/cad,

Re: About:gmake

2005-07-11 Thread Kris Kennaway
On Mon, Jul 11, 2005 at 04:35:23PM +0800, zhoumin wrote: Hi,my name is zhoumin. I installed the package??gamke-3.80_2.tbz on freebsd 4.7.But the command still can't run.I got this error message: ELF interpreter /libexec/ld-elf.so.1 not found, but I found the file in that

Re: Per disk quota

2005-07-11 Thread alexandre . delay
Alexandre D. wrote: Hi guys, I'm searching for a way to set a limit per directory. for example: directorylimit /web/dir11Go /web/dir210Mo /web/dir3100Mo /web/dir4175Mo This system would be used by only one program (image

Re: Per disk quota

2005-07-11 Thread Igor Robul
[EMAIL PROTECTED] wrote: Nice idea! I didn't think about it! I have a wonder about that. Does this procedure include a delay in file access time? I cant give you exact numbers, but I think that for _one_ application you'll not get big performance reduction.

Re: dd to unused partition (Hey! someone stole my foot-shooting gun!)

2005-07-11 Thread Mario Hoerich
# Lee Harr: dd if=iso of=/dev/ad0s1 but what I am getting now is ... dscheck(#ad/0x22): fixlabel: invalid magic fixlabel: invalid magic dd: /dev/ad0s1: Read-only filesystem This error isn't new, it just, well, doesn't happen very often: kern/subr_diskslice.c: | static char * |

Time not wanting to change

2005-07-11 Thread Warren
im running FreeBSD5.4-STABLE For some damn reason my Clock in KDE reads the correct time but yet my system base time when doing a uname -a outputs to UTC time and not AEST. i have run rdate and other programs and not one of them manages to fix the time, i even checked BIOS, i even (gasp)

Re: Time not wanting to change

2005-07-11 Thread Bob Bomar
On Mon, Jul 11, 2005 at 01:34:36PM +, Warren wrote: im running FreeBSD5.4-STABLE For some damn reason my Clock in KDE reads the correct time but yet my system base time when doing a uname -a outputs to UTC time and not AEST. i have run rdate and other programs and not one of them

Re: Time not wanting to change

2005-07-11 Thread Warren
What is /etc/localtime set to? Try: ln -s /usr/share/zoneinfo/ZONEFILE /etc/localtime /etc/localtime controls what timezone the system uses, KDE uses something different. Nothing was previously set, so i have done as suggested. How do i now get the system to use the /etc/localtime ? im

Re: Time not wanting to change

2005-07-11 Thread Björn König
Warren wrote: im running FreeBSD5.4-STABLE For some damn reason my Clock in KDE reads the correct time but yet my system base time when doing a uname -a outputs to UTC time and not AEST. i have run rdate and other programs and not one of them manages to fix the time, i even checked BIOS, i

Re: device.hints question

2005-07-11 Thread Lowell Gilbert
George Fazio [EMAIL PROTECTED] writes: I was installing apcupsd with an APC USB UPS, and found that I needed to disable the uhid driver. The instructions on the apcupsd site specifically say to recompile the kernel. But, I try to keep my kernel as generic as possible, so I tried entering the

Re: Time not wanting to change

2005-07-11 Thread Bob Bomar
On Mon, Jul 11, 2005 at 02:02:09PM +, Warren wrote: What is /etc/localtime set to? Try: ln -s /usr/share/zoneinfo/ZONEFILE /etc/localtime /etc/localtime controls what timezone the system uses, KDE uses something different. Nothing was previously set, so i have done as

Re: Screen display problem during installation

2005-07-11 Thread Jim Mozley
Jim Mozley wrote: I'm trying to install 5.4 on a system that currently has 4.10 on it. My problem is that when the system boots from the install disk 1 I cannot see the initial menu due to a display problem. I see the initial boot information then the box that should have the selection

Re: Screen display problem during installation

2005-07-11 Thread Hornet
On 7/11/05, Jim Mozley [EMAIL PROTECTED] wrote: Jim Mozley wrote: I'm trying to install 5.4 on a system that currently has 4.10 on it. My problem is that when the system boots from the install disk 1 I cannot see the initial menu due to a display problem. I see the initial boot

Gnome upgrade killed mouse

2005-07-11 Thread Paul Schmehl
I ran the gnome_upgrade.sh script and now my mouse doesn't. Even if I run Xorg -configure and start X with the generated xorg.conf.new file, the mouse doesn't work. I can see the mouse being detected in the dmesg.boot, so it appears to be a problem with Xorg rather than device detection.

Re: Electrical circuits simulator

2005-07-11 Thread scuba
Hi, You can try gEDA it´s amazing. /usr/ports/cad/geda or http://www.geda.seul.org/ - Marcelo Souza On Mon, 11 Jul 2005, Andrey Simonenko wrote: |On Thu, Jul 07, 2005 at 09:04:20PM +0530, ??? (Shantanoo) wrote: | On 7/7/05, Andrey Simonenko

Internal vs. External domains and e-mail

2005-07-11 Thread DH
Hello; We are going to migrate to an Interal Windows 2003 AD structure which will also entail changing our Internal DNS to a non-routeable domain. Currently we are using qmail qmail-scanner to relay mail to an Internal Exchange Server. mydomain.com

Re: Expire undeleted mail older than specified age

2005-07-11 Thread scuba
Hi, I use a perl script called expire_mail.pl. Search google for it´s name, it´s simple and can be used from cron. - Marcelo Souza On Mon, 11 Jul 2005, Ann Lee wrote: |Hi , | |Does anyone know how could I make expire_age - Expire undeleted mail |older than specified age in

Firefox won't start (again!)

2005-07-11 Thread cpghost
On a RELENG_5 system from June 30th (source and ports), firefox-1.0.4 won't start. It just hangs in the kserel state. This is on a diskless system using NFS. Running truss(1) on the hanging firefox-bin process shows: kse_release(0x8065fa4) = 383 (0x17f) kse_release(0x8065fa4) = 0 (0x0)

LiveCD on FreeBSD 5.x

2005-07-11 Thread scuba
Hi, Does LiveCD work well with FBSD 5.x? http://livecd.sourceforge.net/ - Marcelo ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL

Re: Port update failure -- How do I fix?

2005-07-11 Thread Tim Hogan
Thanks for the tip Mark. I ran cvsup against my ports again, tried to install and it Worked! Tim Mark Frank wrote: * On Sat, Jul 09, 2005 at 12:20:29PM -0400 Chuck Swiger wrote: Tim Hogan wrote: So the bottom line is that I love the ports because I am by no means a programer. As

Re: Screen display problem during installation

2005-07-11 Thread Jim Mozley
Hornet wrote: Can you swap out the video card as a temp solution? Thanks for the response. This would not really be practical, I have several servers that may need upgrading on different sites. They are 1U rack mount servers in different data centres and it would make upgrading very

problems with install (write failure on transfer)

2005-07-11 Thread Richard Potter
Hi, Please help. I receive the error write failure on transfer! . when downloading base from ANY ftp server and when taking it if the iso image. Is there a problem with this file? Yours, Richard ___ freebsd-questions@freebsd.org mailing list

Mouse problem solved???

2005-07-11 Thread Paul Schmehl
I've solved my mouse problem. I had to enable the mouse in /etc/rc.conf to get it to work. I did not have to do this before I updated gnome, so I assume something changed to make it a requirement now? I still need to know if it's OK to use portupgrade to upgrade gnome-related ports after

two 3C905B's in 5.4

2005-07-11 Thread dave
Hello, I've got a 5.4 box that's going to be a router. It has two 3C905B cards in it and i'm having a blank fill it in as you wish, of a time getting the cards working. Neither card likes dhcp, sometimes i'll start dhclient and the cards will work, sometimes they won't. If i give the -v option

error with squid: Page faults with physical i/o: 0

2005-07-11 Thread vladone
I have installed squid from ports and i try to build the cache: #: /usr/local/sbin/squid -z and receive: FATAL: Could not determine fully qualified hostname. Please set 'visible_hostname' Squid Cache (Version 2.5.STABLE10): Terminated abnormally. CPU Usage: 0.006 seconds = 0.006 user + 0.000

Re: error with squid: Page faults with physical i/o: 0

2005-07-11 Thread Sean Hafeez
Notice the line that says FATAL. Try setting that. If you still have problems post your config (and please edit out the miles of comments). On Jul 11, 2005, at 10:47 AM, vladone wrote: I have installed squid from ports and i try to build the cache: #: /usr/local/sbin/squid -z and receive:

Re: error with squid: Page faults with physical i/o: 0

2005-07-11 Thread estover
I have installed squid from ports and i try to build the cache: #: /usr/local/sbin/squid -z and receive: FATAL: Could not determine fully qualified hostname. Please set 'visible_hostname' Squid Cache (Version 2.5.STABLE10): Terminated abnormally. CPU Usage: 0.006 seconds = 0.006 user +

Re: error with squid: Page faults with physical i/o: 0

2005-07-11 Thread Chad Morland
On 7/11/05, vladone [EMAIL PROTECTED] wrote: I have installed squid from ports and i try to build the cache: #: /usr/local/sbin/squid -z and receive: FATAL: Could not determine fully qualified hostname. Please set 'visible_hostname' How i can resolv this? Either configure DNS for that

GEOM_STRIPE Problems on Reboot

2005-07-11 Thread Drew Tomlinson
I just installed 5.4-RELEASE. I created a gstripe volume per the example in the man page. Googling revealed that I needed to load the geom_stripe module upon reboot so the volume can be created. I added the following line to /boot/loader.conf: geom_stripe_load=yes Now upon reboot, I get

Geom and 5.4

2005-07-11 Thread David Dooley
Hi, I hope somebody can guide me as to where I have gone wrong. I have an Intel system with FreeBSD 5.3 installed. I have 1 system disk and 8 other drives connected to 2 Promice IDE controllers. The system disk is un-mirrored. The non-system disk are labled ad4 thru ad11. ad4 thru ad7 on

Keeping RELEASE_4_10 current?

2005-07-11 Thread Eric Pretorious
Hello, All: I've inherited a 4.10 system that needs to be kept current but does NOT have cvsup installed yet. What's the best way to bring this system up-to-date with 4-STABLE? -- Eric P., Truckee, CA ___ freebsd-questions@freebsd.org mailing list

RE: two 3C905B's in 5.4

2005-07-11 Thread John Brooks
you may need to set the parameters of the card with a vendor specific utility. depending upon your bios, you may also need to disable pnp (also a vendor specific utility) and then manually set the irq and memory addr. -- John Brooks [EMAIL PROTECTED] -Original Message- From: [EMAIL

OT: Shell script

2005-07-11 Thread Brian Henning
All, I am trying to write an SH script that i need some functionality. I want it to be able to get a filename without the extention on the end. for example. file.mp3 i would like it to return 'file'. Any ideas? Thanks, BH ___

Re: error with squid: Page faults with physical i/o: 0

2005-07-11 Thread vladone
Sorry all! First i think that is something more complicated! Now swap is created succesfull! Thanks! ___ freebsd-questions@freebsd.org mailing list

Re: Keeping RELEASE_4_10 current?

2005-07-11 Thread lars
Eric Pretorious wrote: Hello, All: I've inherited a 4.10 system that needs to be kept current but does NOT have cvsup installed yet. What's the best way to bring this system up-to-date with 4-STABLE? http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/synching.html

Re: FreeBSD 5 - What Options for SMP Kernel? -- SOLVED

2005-07-11 Thread Drew Tomlinson
On 7/10/2005 11:55 PM Nelis Lamprecht wrote: On 7/11/05, Drew Tomlinson [EMAIL PROTECTED] wrote: I just built my first 5.4-RELEASE system. I want a SMP kernel. The GENERIC kernel conf file contains this line: device apic# I/O apic According to NOTES, this is

Re: OT: Shell script

2005-07-11 Thread Philip Hallstrom
All, I am trying to write an SH script that i need some functionality. I want it to be able to get a filename without the extention on the end. for example. file.mp3 i would like it to return 'file'. Probably lots of ways. Use sed in a pipe... sed 's/\$//' -philip

Re: OT: Shell script

2005-07-11 Thread Lowell Gilbert
Brian Henning [EMAIL PROTECTED] writes: I am trying to write an SH script that i need some functionality. I want it to be able to get a filename without the extention on the end. for example. file.mp3 i would like it to return 'file'. basename(1); it's even POSIX, so it's pretty

(win?)modem

2005-07-11 Thread Frans-Jan v. Steenbeek
Hey folks! As a long time user of FreeBSD, I have come to a problem I cannot solve alone :) So your help is apreciated... I have moved to an appartement where I have to rely on a modem for the time being. DSL is following soon, but until then I have purchased a modem wich claims to be a hardware

Re: OT: Shell script

2005-07-11 Thread Gerhard Meier
On Mon, Jul 11, 2005 at 01:36:31PM -0500, Brian Henning wrote: I want it to be able to get a filename without the extention on the end. [...] file.mp3 i would like it to return 'file'. Well, I like the following solution, because it doesn't fork: FILE=file.mp3 echo ${FILE%.*} bye, Gerhard

Re: Suspend-to-disk resuming

2005-07-11 Thread Ben Jencks
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Fabian Keil [EMAIL PROTECTED] writes: Ben Jencks [EMAIL PROTECTED] wrote: I'm trying to get suspend-to-disk (S4OS) working. (S3 doesn't work, but I'll worry about that later). When I run acpiconf -s 4, it appears to suspend ok. However, when I

Re: OT: Shell script

2005-07-11 Thread Philip Hallstrom
I am trying to write an SH script that i need some functionality. I want it to be able to get a filename without the extention on the end. for example. file.mp3 i would like it to return 'file'. basename(1); it's even POSIX, so it's pretty portable. But only if he knows the file extension

Re: (win?)modem

2005-07-11 Thread Garrett Cooper
Frans-Jan v. Steenbeek wrote: Hey folks! As a long time user of FreeBSD, I have come to a problem I cannot solve alone :) So your help is apreciated... I have moved to an appartement where I have to rely on a modem for the time being. DSL is following soon, but until then I have purchased a

Re: m4p conversion to mp4?

2005-07-11 Thread Garrett Cooper
Louis LeBlanc wrote: On 07/10/05 08:57 PM, Louis LeBlanc sat at the `puter and typed: This is probably painfully obvious, but I can't find it in the ports with a search or through google. I recently acquired an iPod Shuffle, and am enjoying it thoroughly. Unfortunately, I also acquired a

Re: OT: Shell script

2005-07-11 Thread Lowell Gilbert
Philip Hallstrom [EMAIL PROTECTED] writes: I am trying to write an SH script that i need some functionality. I want it to be able to get a filename without the extention on the end. for example. file.mp3 i would like it to return 'file'. basename(1); it's even POSIX, so it's

Re: OT: Shell script

2005-07-11 Thread Björn König
Brian Henning wrote: I am trying to write an SH script that i need some functionality. I want it to be able to get a filename without the extention on the end. for example. file.mp3 i would like it to return 'file'. Any ideas? This one looks ugly, but works fine: echo

g4u and growfs? (Was Make Image of Hard Drive)

2005-07-11 Thread Danny Howard
On Sun, Jul 10, 2005 at 11:42:26PM +0100, Iu hh wrote: You can try ghost for unix (g4u, here: http://www.feyrer.de/g4u/). It's a very powerful network based cloning software, just pop in the bootable disk/cd, and then upload/download the image to your local ftp server. I'm using it to

FreeBSD 5.4-STABLE, some core dumps

2005-07-11 Thread -
Hi, Lately my dual xeon server has been core dumping with signal 10 with a lot of programs: 18:06:21 SRV_NAME kernel: pid 22681 (proxymap), uid 125: exited on signal 10 18:06:29 SRV_NAME kernel: pid 22683 (pipe), uid 125: exited on signal 10 18:06:29 SRV_NAME kernel: pid 22688 (virtual), uid

Problem with pw not creating home directories

2005-07-11 Thread Bryce Kahle
I've been setting up a NIS domain between a couple machines and have run into a problem with pw. I have the NIS server which also has a large disk array shared via NFS. It contains a directory /nfs/home where all the NIS user home directories are supposed to be located. The problem comes when I

port to Ardent Titan?

2005-07-11 Thread Keira Chekel
Is a porting of FreeBSD available for this Ardent Titan? Thanks, Jim ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]

Re: Mouse problem solved???

2005-07-11 Thread Alex Zbyslaw
Paul Schmehl wrote: I still need to know if it's OK to use portupgrade to upgrade gnome-related ports after upgrading to gnome2.10 using gnome_upgrade.sh. I think if it wasn't OK then UPDATING would have said so. gnome_upgrade.sh seems to have been specifically because of a major leap in

Forcing a packet through an interface (OT?)

2005-07-11 Thread Mario Lobo
Forgive me if this is off-topic. How could I force a packet to go out through an interface, despite the default route? Suppose I have two interfaces connected to the internet: 1) rl0 (real.ip.no.1) --- ISP x 2) rl1 (real.ip.no.2) --- ISP y ISP y is just a backup link. ISP x is the working

Re: Forcing a packet through an interface (OT?)

2005-07-11 Thread Warner Losh
Suppose 1) is down. I switch to 2). But I have to keep testing 1) to see when it comes back up. How could I force a packet (ping maybe?) to www.whatever.com through 1), despite the default route being 2) ? I am aready binding the ping packet to the IP I want but that´s not enough. any

How to pass configure options

2005-07-11 Thread scuba
Hi all, How can I pass some extra configure options when making ports? I could not find it on FAQ or handbook. I´m using the hard way. make fetch cd work/someprog/ ./configure --with... cd ../../ make make install

security report messages

2005-07-11 Thread Matt Juszczak
Hi all, Receiving the following... I assume this is just because of a portupgrade that we did that tried to upgrade cyrus, and I assume this is the automated port account creation/deletion that it does but I wanted to run it by everyone. Jul 9 15:29:52 mercury saslpasswd: failed to

Re: How to pass configure options

2005-07-11 Thread Charles Swiger
On Jul 11, 2005, at 5:24 PM, [EMAIL PROTECTED] wrote: How can I pass some extra configure options when making ports? Edit the port's top-level Makefile, and add whatever options you'd like to $CONFIGURE_ARGS, as in: CONFIGURE_ARGS+=--disable-nls -- -Chuck

Re: How to pass configure options

2005-07-11 Thread Kövesdán Gábor
[EMAIL PROTECTED] wrote: Hi all, How can I pass some extra configure options when making ports? I could not find it on FAQ or handbook. I´m using the hard way. make fetch cd work/someprog/ ./configure --with... cd ../../ make

Re: Mouse problem solved???

2005-07-11 Thread Greg Barniskis
Alex Zbyslaw wrote: Paul Schmehl wrote: I still need to know if it's OK to use portupgrade to upgrade gnome-related ports after upgrading to gnome2.10 using gnome_upgrade.sh. I think if it wasn't OK then UPDATING would have said so. gnome_upgrade.sh seems to have been specifically because

Re: Mouse problem solved???

2005-07-11 Thread Paul Schmehl
--On Monday, July 11, 2005 16:37:01 -0500 Greg Barniskis [EMAIL PROTECTED] wrote: Alex Zbyslaw wrote: Paul Schmehl wrote: I still need to know if it's OK to use portupgrade to upgrade gnome-related ports after upgrading to gnome2.10 using gnome_upgrade.sh. I think if it wasn't OK then

RE: (win?)modem

2005-07-11 Thread fbsd_user
FreeBSD does not work with winmodems. FreeBSD uses hardware modems only. That being said: there is the ltmdm port of the Linux lucent winmodem driver that works with some of the conexant winmodems. Only thing you can do is install the ltmdm port and see if it works with your modem. If not then you

Re: How to pass configure options

2005-07-11 Thread Drew Tomlinson
On 7/11/2005 2:36 PM Kövesdán Gábor wrote: [EMAIL PROTECTED] wrote: Hi all, How can I pass some extra configure options when making ports? I could not find it on FAQ or handbook. I´m using the hard way. make fetch cd work/someprog/ ./configure --with... cd

sshd prompt for password very slow

2005-07-11 Thread vladone
When i try to login remote on my server, receive very quickly prompt for login as: After insert my username, promt for password, is avaible after aproximatively 10s. This is happend in local network. Why is so slowly? My system: FreeBsd 5.4 release video 64mb memory 256 mb

Re: dd to unused partition (Hey! someone stole my foot-shooting gun!)

2005-07-11 Thread Lee Harr
dd if=iso of=/dev/ad0s1 dd: /dev/ad0s1: Read-only filesystem According to URL:http://makeashorterlink.com/?S37C2186B[1] a workaround might be using dd if=/dev/foo of=/dev/ad0 oseek=63 Ah. Ok. That should have been obvious :oP What about those first few bytes, though? I think I am not

Re: sshd prompt for password very slow

2005-07-11 Thread jdyke
vladone wrote: When i try to login remote on my server, receive very quickly prompt for login as: After insert my username, promt for password, is avaible after aproximatively 10s. This is happend in local network. Why is so slowly? My system: FreeBsd 5.4 release video 64mb

Re: port to Ardent Titan?

2005-07-11 Thread Danny Howard
On Mon, Jul 11, 2005 at 02:01:12PM -0700, Keira Chekel wrote: Is a porting of FreeBSD available for this Ardent Titan? Thanks, Jim You have such a legendary beast? From http://en.wikipedia.org/wiki/Ardent : Ardent was a graphics minicomputer manufacturing company, one of a very few 3rd

Re: Serial console capable BIOSes?

2005-07-11 Thread Toni Schmidbauer
On Sun, Jul 03, 2005 at 11:17:14AM -0700, Steve Brown wrote: Does anyone have recommendations for motherboards (P3 or P4) with good BIOS serial console support that plays nicely with FreeBSD running a serial console on the same port? Basically, I'd like to monitor the pre-BSD boot process

Re: Dual Fibre Channel Host Adapter

2005-07-11 Thread Toni Schmidbauer
On Thu, Jun 30, 2005 at 02:10:18PM +0200, Valerio daelli wrote: we have a few FreeBSD 5.4 boxes on HP Proliant DL360 and DL380. We have to buy some Dual Fibre Channel Host Adapter for these hosts and we would like to know which are the best supported by FreeBSD. If you have any experience with

Re: atheros supported wireless card not seen under 5.4 release - help please

2005-07-11 Thread Toni Schmidbauer
On Fri, Jul 01, 2005 at 11:56:20PM -0700, D. Goss wrote: Just went off to check GENERIC - I'm (obviously) new to this but it seems that ath is not in GENERIC, correct? I'll try rebuilding with it... rebuilding the kernel is not necessary. you could do a kldload if_ath after booting, or

Re: WLAN Access Point without Prism Chip

2005-07-11 Thread Toni Schmidbauer
On Tue, Jul 05, 2005 at 02:27:07PM +0200, Tobias Tom wrote: I've found inside the manual that currently only Prism Chips are supported to create Access Points in FreeBSD (stable). I that still a valid statement, or is there any unofficial Solution which I could give a try? afaik, ath(4)

Still uable to install DarwinStreamingServer

2005-07-11 Thread steve lasiter
I'm still looking for ANY help on getting Darwin Streaming Server installed, either via ports or manually. The port is broke and I've contacted the port maintainer and have got no reply. I'm also aware that he/she may be busy and I understand this so I'm not complaining and never would. My group

Re: Firefox won't start (again!)

2005-07-11 Thread Chris
On Mon, 11 Jul 2005, cpghost wrote: On a RELENG_5 system from June 30th (source and ports), firefox-1.0.4 won't start. It just hangs in the kserel state. This is on a diskless system using NFS. Running truss(1) on the hanging firefox-bin process shows: kse_release(0x8065fa4) = 383 (0x17f)

Re: Still uable to install DarwinStreamingServer

2005-07-11 Thread Lowell Gilbert
steve lasiter [EMAIL PROTECTED] writes: I'm still looking for ANY help on getting Darwin Streaming Server installed, either via ports or manually. The port is broke and I've contacted the port maintainer and have got no reply. I'm also aware that he/she may be busy and I understand this so

Re: Forcing a packet through an interface (OT?)

2005-07-11 Thread Avleen Vig
On Mon, Jul 11, 2005 at 04:53:25PM -0300, Mario Lobo wrote: Forgive me if this is off-topic. How could I force a packet to go out through an interface, despite the default route? You have a couple of options. Look at CARP in 5.4, that might do what you want best. man 4 carp Also google for:

Re: Still uable to install DarwinStreamingServer

2005-07-11 Thread Greg Barniskis
steve lasiter wrote: I'm still looking for ANY help on getting Darwin Streaming Server installed, either via ports or manually. The port is broke and I've contacted the port maintainer and have got no reply. I'm also aware that he/she may be busy and I understand this so I'm not complaining and

Gqview permantly frozen

2005-07-11 Thread Lawrence Petrykanyn
Hi, I've recently installed FreeBSD 5.4. and it is working well, except for gqview. It will open in Gnome2, but the only control that responds to a mouse click is the X in the upper right hand corner to close it. I am unable to navigate the directory tree as simply nothing happens when

Installing 5.4 on Compaq Armada E500

2005-07-11 Thread Duarte, Ivo
Hi, I've been unable to install using the boot cd. I can boot with no difficulties but the installation won't proceed from the CD. It tells me it can't find a CD. I've tried creating and format a small C: partion and tried to tell it to use a DOS partion, same issue. I've tried boot floppies

Re: Forcing a packet through an interface (OT?)

2005-07-11 Thread Chad Leigh -- Shire.Net LLC
On Jul 11, 2005, at 5:26 PM, Mario Lobo wrote: Forgive me if this is off-topic. How could I force a packet to go out through an interface, despite the default route? Suppose I have two interfaces connected to the internet: 1) rl0 (real.ip.no.1) --- ISP x 2) rl1 (real.ip.no.2) --- ISP y

Forcing a packet through an interface (OT?)

2005-07-11 Thread Mario Lobo
Forgive me if this is off-topic. How could I force a packet to go out through an interface, despite the default route? Suppose I have two interfaces connected to the internet: 1) rl0 (real.ip.no.1) --- ISP x 2) rl1 (real.ip.no.2) --- ISP y ISP y is just a backup link. ISP x is the working

  1   2   >