It worked out, but I had to strangely disable gdm at /etc/rc.conf,
do you have any idea on this??
On 17 Oct 2005 10:39:44 +0300, Vincent Ngundi [EMAIL PROTECTED] wrote:
Try:
ttyv8 /usr/X11R6/sbin/gdm -nodaemon xterm on secure
--
Vincent.
From a KDE Root console, I changed a directory's permissions to 770 and added
my account to it's group with pw. In another console, under my own account,
I tried to cd into the directory and failed, no gui application could access
the directory either. pw showed I was a member of the group.
On Fri, 2005-10-21 at 11:39 -0700, Derrick MacPherson wrote:
As per the subject, Dell PE 830, with Intel 82801 SATA Controller that
is not recognized. Kind of. When I get to the boot loader, and type
lsdev, it shows the drive, recognizes the linux partitions that are on
it, but when I get to
On Oct 21, 2005, at 3:12 PM, RW wrote:
From a KDE Root console, I changed a directory's permissions to
770 and added
my account to it's group with pw. In another console, under my own
account,
I tried to cd into the directory and failed, no gui application
could access
the directory
I need to make a server box that will serve web pages ( light ), do
light file storage for my home network and allow me ssh access when I
am away from the apartment. I have read a great deal about this on the
site and looked at the manufactures sites. I see a great deal of
potential there but I
On Oct 21, 2005, at 4:12 PM, RW wrote:
From a KDE Root console, I changed a directory's permissions to 770
and added
my account to it's group with pw. In another console, under my own
account,
I tried to cd into the directory and failed, no gui application
could access
the directory
On Oct 21, 2005, at 8:04 AM, kilim wrote:
Hi,
I'm getting a second machine next week and was wondering if the
following settup would be ok:
1st machine pf + NAT and also primary DNS
2nd machine as a secondary DNS
Now I know that its not the smartest thing to do, have primary DNS on
the
On Oct 20, 2005, at 8:53 AM, Lowell Gilbert wrote:
Live-Wire [EMAIL PROTECTED] writes:
I'm going to be connecting my 5.4 box w/ no monitor to my network,
but
before I move it to the router area I want to make sure
I'll be able to change the network configuration without lugging the
box
On Oct 21, 2005, at 3:21 PM, Ben Siemon wrote:
I need to make a server box that will serve web pages ( light ), do
light file storage for my home network and allow me ssh access when I
am away from the apartment. I have read a great deal about this on the
site and looked at the manufactures
Ben Siemon wrote:
I need to make a server box that will serve web pages ( light ), do
light file storage for my home network and allow me ssh access when I
am away from the apartment. I have read a great deal about this on the
site and looked at the manufactures sites. I see a great deal of
Sasa Stupar wrote:
Hi!
Can someone provide me a link for a good tutorial for installing and
configuring a LDAP server on FBSD 5.4?
Regards,
Sasa
I've been able to successfully set up an openLDAP server pretty quickly
using the docs at http://www.openldap.org/doc/admin23/
The setup is
Generally I chroot ftp users by simply adding their username to
/etc/ftpchroot. In older days, I used login.conf, etc.
The point is, it's easy to take a specific user and set a chroot that
applies to what they can see when they use ftp.
What is the equivalent mechanism for rsync ?
thanks.
I can't seem to mount my CD drives, in particular my dvd-cdrw. I'm
trying to burn ISO's w/ k3b but can't add the device because of the
error. It won't even let me change drive permissions. What can I do?
Best regards,
James
___
Ben Siemon wrote:
I need to make a server box that will serve web pages ( light ), do
light file storage for my home network and allow me ssh access when I
am away from the apartment. I have read a great deal about this on the
site and looked at the manufactures sites. I see a great deal of
I can't seem to mount my CD drives, in particular my dvd-cdrw. I'm
trying to burn ISO's w/ k3b but can't add the device because of the
error. It won't even let me change drive permissions. What can I do?
I may be wrong on this, but I do not believe you mount a drive
to burn a cd/dvd. The
On Fri, 2005-10-21 at 13:14 -0700, Derrick MacPherson wrote:
On Fri, 2005-10-21 at 11:39 -0700, Derrick MacPherson wrote:
As per the subject, Dell PE 830, with Intel 82801 SATA Controller that
is not recognized. Kind of. When I get to the boot loader, and type
lsdev, it shows the drive,
RW wrote:
I have 470 ports installed, that's a lot of Makefiles to check for changes.
This was the issue for me. I am gradually developing a package server
for a suite of desktops, adding more ports as required by the desktop
users. In my original post I was imagining a utility akin to
I'm running low on disc space on my /usr partition and I would like to
compile a program from the ports that is rather large. I have enough space
once it's compiled, it's just the work that I don't have enough space for.
how can I get the port to do it's work in a different area on a
On Oct 21, 2005, at 4:18 PM, Matt Crossley wrote:
I've found that if it's not really all that heavy a load, machines
at Dell that regularly come up are worth it.
The latest one that I saw in a Dell flyer (in Canada), was a
Celeron 2.9, 512MB, 80 or 60GB, etc, etc for $349 CAD.
Can beat it,
On Friday 21 October 2005 14:47, ross wrote:
I'm running low on disc space on my /usr partition and I would like to
compile a program from the ports that is rather large. I have enough space
once it's compiled, it's just the work that I don't have enough space for.
how can I get the port to do
I'm running low on disc space on my /usr partition and I would like to
compile a program from the ports that is rather large. I have enough space
once it's compiled, it's just the work that I don't have enough space for.
how can I get the port to do it's work in a different area on a
Eric F Crist wrote:
On Oct 21, 2005, at 4:18 PM, Matt Crossley wrote:
I've found that if it's not really all that heavy a load, machines
at Dell that regularly come up are worth it.
The latest one that I saw in a Dell flyer (in Canada), was a Celeron
2.9, 512MB, 80 or 60GB, etc, etc for
In the last episode (Oct 21), user said:
Generally I chroot ftp users by simply adding their username to
/etc/ftpchroot. In older days, I used login.conf, etc.
The point is, it's easy to take a specific user and set a chroot that
applies to what they can see when they use ftp.
What is
On Oct 21, 2005, at 5:55 PM, Matt Crossley wrote:
Eric F Crist wrote:
On Oct 21, 2005, at 4:18 PM, Matt Crossley wrote:
I've found that if it's not really all that heavy a load,
machines at Dell that regularly come up are worth it.
The latest one that I saw in a Dell flyer (in Canada),
On Fri, Oct 21, 2005 at 06:42:36PM -0400, Jerry McAllister wrote:
I'm running low on disc space on my /usr partition and I would like to
compile a program from the ports that is rather large. I have enough space
once it's compiled, it's just the work that I don't have enough space
On Fri, 21 Oct 2005, Dan Nelson wrote:
In the last episode (Oct 21), user said:
Generally I chroot ftp users by simply adding their username to
/etc/ftpchroot. In older days, I used login.conf, etc.
The point is, it's easy to take a specific user and set a chroot that
applies to
So I'm on my *nix shell just now, and I'm all, hmmm how do I change my
shell? The default for this install [which shall remain nameless] is
/bin/bash
I type echo $SHELL
I type chfn (nope)
I try stuff like setenv $SHELL /bin/tcsh
Nope
I accidentally type cat $SHELL once (lol) (try it to
Erik Norgaard wrote:
On Fri, 21 Oct 2005, Ronny Machado C. wrote:
*My sound card is a Sound Blaster Live!, I've tried to load it by
means of kldload emu10k1, it worked but I can't get it to work.
Honestly I haven't configured MYKERNEL since I still don't understand
the process.
No
Hi
I am currently dual booting between windows and freebsd but I need to
reinstall windows on the other partition. How do I create a freebsd boot
disk so that after windows rewrites my mbr I can still get back to bsd?
Then how would I re-install freebsd's boot manager so I can continue to
dual
El día Thursday, October 20, 2005 a las 02:19:55PM -0500, Efren Bravo escribió:
Hi,
I've a freebsd5.4 with ipfw and natd. I need that external users can enter
to my internal network services (http, ftp, etc).
freebsd box:
out interface: 200.x.x.x
in interface: 10.x.x.x
/etc/rc.conf
Hello,
I have several files on my system that I have received from various
sources - French, German, and Italian. They have all flavors of accents and
umlauts. When I list these files in my Konsole, the filenames are all messed
up - but only on the non-English characters (I'm assuming the
Hi people, i have this tape: Seagate STD224000N, is plug into one
scsi pci card, freebsd is using this drives:
*ahc
*pass
*sa
My questions is, i need to setup first the pci-card on my BIOS or
there is no problem if the BIOS dont have the driver?
This all my doubt, thanks all for your
On Thu, Oct 20, 2005 at 09:55:45AM -0400, Lowell Gilbert wrote:
When I symlink libjavaplugin_oji.so from
/usr/X11R6/lib/browser_plugins/ to the plugin path in jdk directory, I
get this error message on starting Mozilla:
LoadPlugin: failed to initialize shared library
Deepak Naidu wrote:
Right Mike, this is what exactly I want. More details are
I have LVS server in Linux, installed with Nagios. I have 5 spam servers and 5
IMAP and POP servers, from which 2 spam servers are
Hey Igor Robul, what made u seem my mail as spam
If replying the message is spam I hope there is no
meaning of mail forum I just C one more spammer
named Igor ha ha ha ha...
Cheers,
Deepak Naidu.
--- Igor Robul [EMAIL PROTECTED] wrote:
Deepak Naidu wrote:
Right Mike, this is what
Hi i want to know is someone of you knows about some links where i
can find some how-to use tapes drivers(scsi), thanks people.
I try the man page, but get how to play with my tape...
___
freebsd-questions@freebsd.org mailing list
Mike Pete one question more, sorry dudes...
I have the Nagios server on Linux, Have installed nrpe
v2.0 on FreeBSD, when using check_nrpe from linux box,
I get CHECK_NRPE: Socket timeout after 10 seconds
error, theres no firewall, but when using chekc_nrpe
from FreeBSD to FreeBSD it works fine.
Deepak Naidu wrote:
Hey Igor Robul, what made u seem my mail as spam
Because you have writen :
I have LVS server in Linux, installed with Nagios. I have 5 spam
servers and 5 IMAP and POP servers, from
which 2 spam servers are
in your mail.
Unfortunately
Hi,
I'm running OpenOffice.Org-2.0-RC1 (from package),
on a FreeBSD 5-Stable system.
With this new release, I can include movie/sound
in a presentation. But when I insert an mpeg file,
a popup window appears with:
OpenOffice.org requires a Java runtime environment
(JRE) to perform this
On Thu, Oct 20, 2005 at 11:29:17PM +0100, Charles Smyth wrote:
Hi there,
When I have downloaded the patches and parts from sun.com into the distfiles
directory and run ?make install? in /usr/ports/java/jdk14 for FreeBSD 5.4/6.0
all goes okay apart from a prompt about also running make
Rob wrote:
Hi,
I'm running OpenOffice.Org-2.0-RC1 (from package),
on a FreeBSD 5-Stable system.
With this new release, I can include movie/sound
in a presentation. But when I insert an mpeg file,
a popup window appears with:
OpenOffice.org requires a Java runtime environment
(JRE) to
Mark wrote:
I am currently dual booting between windows and freebsd but I need to
reinstall windows on the other partition. How do I create a freebsd boot
disk so that after windows rewrites my mbr I can still get back to bsd?
Then how would I re-install freebsd's boot manager so I can continue
On Thu, 20 Oct 2005 22:39:01 -0400
Mike Jeays [EMAIL PROTECTED] wrote:
I am not sure what else to suggest. I didn't get a series of
characters like ? at any point.
Does the command escputil -i -u -r /dev/unlpt0 give you the ink
levels? (This command often times out the first time you
I added a route to my rc.conf now I get this message. The route that
I added seems to work, but
Cron [EMAIL PROTECTED] /usr/libexec/save-entropy
route: not found
The route that I added seems to work, but the syntax must be wrong.
this is what I added:
defaultrouter=10.10.10.1
On Fri, 21 Oct 2005 06:30:43 -0400
Jeff Maxwell [EMAIL PROTECTED] wrote:
I added a route to my rc.conf now I get this message. The route that
-- cut --
route add -net 10.10.30.0 10.10.10.3
the static_routes section in rc.conf's manualpage might be what you need
--
grtjs, albi
gpg-key: lynx
I have an AMD64 system with :
WindowsXP
Suse 9.3
GRUB
I want to install from CDs
How can I install FreeBSD_AMD64__5.4
and add it to the GRUB later
without harming Windows and Suse ?
Kind regards
John Vandeput
___
freebsd-questions@freebsd.org
Jeff Maxwell wrote:
I added a route to my rc.conf now I get this message. The route that I
added seems to work, but
Cron [EMAIL PROTECTED] /usr/libexec/save-entropy
route: not found
The route that I added seems to work, but the syntax must be wrong.
this is what I added:
Hi list
I'm new to freebsd, I come from Linux world, and I dont´t fully understand some
procedures:
* How can I get some daemons working at boot time? In Linux you can do it
via rc.* directories and S* scripts, but in freeBSD I don't know how, I've put
scripts in rc.d but they
On 2005-10-21 08:30, Ronny Machado C. [EMAIL PROTECTED] wrote:
Hi list
I'm new to freebsd, I come from Linux world, and I dont?t fully
understand some procedures:
* How can I get some daemons working at boot time? In Linux you can do
it via rc.* directories and S* scripts, but in freeBSD
I run cvsup-mirror at our site. I wonder, what's the
most efficient way to cvsup the mirror itself.
Running cvsup'ping from localhost seems to
create quite a load (disk and CPU) on the machine
even with compression disabled.
___
[EMAIL PROTECTED] wrote:
Hello,
I have a usb bluetooth dongle and a SE T610 cellphone... I want FreeBSD
(5.4 or 6.0-RC1; whatever floats your boat as I run both) to use the
cellphone as a modem through bluetooth. FreeBSD just needs to dial *99#
then so it uses gprs.
I checked the handbook but
Efren Bravo [EMAIL PROTECTED] writes:
Hi,
I've a freebsd5.4 with ipfw and natd. I need that external users can enter
to my internal network services (http, ftp, etc).
freebsd box:
out interface: 200.x.x.x
in interface: 10.x.x.x
/etc/rc.conf file:
--
Hi,
O.k., people please correct me if I'm wrong but...
I've been having a small amount of trouble with running Java on FreeBSD
(version 5.4 for amd64) and I was hoping that someone would be kind
enough to help me out.
I manually installed the linux version of Java. Which seemed to work
I'm a newbie at FreeBSD, been using MS products all my life. Being an
enlighten one (:P), trying to learn how to use FreeBSD.
Got this problem when trying to install asterisk from ports:
=== asterisk-1.0.9_2 depends on executable: mpg123 - found
=== asterisk-1.0.9_2 depends on file: /nonexistent
Hi,
I'm getting a second machine next week and was wondering if the
following settup would be ok:
1st machine pf + NAT and also primary DNS
2nd machine as a secondary DNS
Now I know that its not the smartest thing to do, have primary DNS on
the firewall, but I'm thinking since the DNS is going
Got k3b installed and trying to sort out some issues. This is a 6.0RC1
with a custom kernel box. In /boot/loader.conf i pass a
'load_atapicam=YES'. This is the only argument there...but its not
working. Once booted if I simply 'kldload atapicam' everything works
like a charm -- scanbus, k3b
thanks a lot Giorgos...you were very kind...
ronny
-Mensaje original-
De: Giorgos Keramidas [mailto:[EMAIL PROTECTED]
Enviado el: Viernes, 21 de Octubre de 2005 8:00
Para: Ronny Machado C.
CC: freebsd-questions@freebsd.org
Asunto: Starting with FreeBSD [rc.conf, ps(1) options, kernel
Hi,
Does anyone know of a utility that will convert courier-imap Maildir
and mail to cyrus-imap mailboxes ?
Thanks,
Serge
-
Dit bericht is enkel bestemd voor de geadresseerde. Indien u niet
de geadresseerde
user [EMAIL PROTECTED] writes:
Folks,
On Thu, 20 Oct 2005, Gayn Winters wrote:
Imagine that each data block is marked with labels
on change. It doesn't matter how many labels there
are, there will be only one data block saved.
In trying to follow this thread, I started looking
Hi again,
Erik Norgaard wrote:
I think you can use mtree to get permissions right if they for some
reason have been changed.
This might be a good one to check... I'm not familiar with it yet, but
does this check all permissions and ownerships and corrects
errors/mismatches where possible?
Andrew P. [EMAIL PROTECTED] writes:
I run cvsup-mirror at our site. I wonder, what's the
most efficient way to cvsup the mirror itself.
Running cvsup'ping from localhost seems to
create quite a load (disk and CPU) on the machine
even with compression disabled.
True.
Using cvs directly
makisupa [EMAIL PROTECTED] writes:
Got k3b installed and trying to sort out some issues. This is a 6.0RC1
with a custom kernel box. In /boot/loader.conf i pass a
'load_atapicam=YES'. This is the only argument there...but its not
working. Once booted if I simply 'kldload atapicam'
That was a serious id10T error
THanks,
mak
(i must need more coffee)
On Fri, 2005-10-21 at 09:47 -0400, Lowell Gilbert wrote:
makisupa [EMAIL PROTECTED] writes:
Got k3b installed and trying to sort out some issues. This is a 6.0RC1
with a custom kernel box. In /boot/loader.conf i
Mark wrote:
I am currently dual booting between windows and freebsd but I need to
reinstall windows on the other partition. How do I create a freebsd boot
disk so that after windows rewrites my mbr I can still get back to bsd?
Then how would I re-install freebsd's boot manager so I
Owen Jeremiah [EMAIL PROTECTED] writes:
I'm a newbie at FreeBSD, been using MS products all my life. Being an
enlighten one (:P), trying to learn how to use FreeBSD.
Got this problem when trying to install asterisk from ports:
=== asterisk-1.0.9_2 depends on executable: mpg123 - found
===
On 21 Oct 2005 09:42:25 -0400, Lowell Gilbert
[EMAIL PROTECTED] wrote:
Andrew P. [EMAIL PROTECTED] writes:
I run cvsup-mirror at our site. I wonder, what's the
most efficient way to cvsup the mirror itself.
Running cvsup'ping from localhost seems to
create quite a load (disk and CPU) on
Hi i want to know is someone of you knows about some links where i
can find some how-to use tapes drivers(scsi), thanks people.
I try the man page, but get how to play with my tape...
What sort of 'playing' do you want to do?
If you just want to write to it and read from it, and do
Hi people, i have this tape: Seagate STD224000N, is plug into one
scsi pci card, freebsd is using this drives:
*ahc
*pass
*sa
My questions is, i need to setup first the pci-card on my BIOS or
there is no problem if the BIOS dont have the driver?
FreeBSd supplies its own drivers
On Fri, 21 Oct 2005, Olaf Greve wrote:
I think you can use mtree to get permissions right if they for some reason
have been changed.
This might be a good one to check... I'm not familiar with it yet, but does
this check all permissions and ownerships and corrects errors/mismatches
where
On Fri, 21 Oct 2005, Ronny Machado C. wrote:
* How can I get some daemons working at boot time? In Linux you can do it
via rc.* directories and S* scripts, but in freeBSD I don't know how, I've put
scripts in rc.d but they don't execute at boot time, Is there a way to do it
via
On 21 Oct 2005, Lowell Gilbert wrote:
The snapshot doesn't know what the bits in the file are. All it knows
is that the file's data used to be, say in block 1857 and now the
file's data are in block 1956. The fact that both blocks are
identical is not detected.
If you're really
On 10/21/05, Jerry McAllister [EMAIL PROTECTED] wrote:
Hi people, i have this tape: Seagate STD224000N, is plug into one
scsi pci card, freebsd is using this drives:
*ahc
*pass
*sa
My questions is, i need to setup first the pci-card on my BIOS or
there is no problem if the
Hi.
I've just installed linuxpluginwrapper with portupgrade to try to listen to
webradio.
Now when I try to run firefox I get this error message:
darkstar /home/mb 4:29:39pm %linux-firefox
/usr/X11R6/lib/linux-firefox/linux-firefox-bin: error while loading shared
libraries: libX11.so.6:
As part of the formalization process for our carreer paths,
our organization is wanting us to be certified in our areas of expertise as part
of any on-going carreer path. Since I do all my work in Linux and
FreeBSD, what sorts of programs are there that would be similar to the
Microsoft
Thanks Erik...very helpful advices...
ronny
-Mensaje original-
De: Erik Norgaard [mailto:[EMAIL PROTECTED]
Enviado el: Viernes, 21 de Octubre de 2005 10:23
Para: Ronny Machado C.
CC: freebsd-questions@freebsd.org
Asunto: Re: Procedures
On Fri, 21 Oct 2005, Ronny Machado C. wrote:
*
Is the boot-only CD simply for installing? If it functions as a live CD,
does it include httpd and webmin? If not to either, can you help me find a
BSD-based distro that does?
-Andrew
--
Entweder man lebt, oder man ist konsequent
-Erich Kästner
___
On Fri, 21 Oct 2005 16:35:05 +0200
Mikael Backman [EMAIL PROTECTED] wrote:
darkstar /home/mb 4:29:39pm %linux-firefox
/usr/X11R6/lib/linux-firefox/linux-firefox-bin: error while loading
shared libraries: libX11.so.6: cannot open shared object file: No
such file or directory
Did you install
Hi Erik (and others),
# cd /etc
# pwd_mkdb master.passwd
# pwd_mkdb -p master.passwd
I made copies of /etc/passwd and /etc/master.passwd, then I ran the two
commands above and now it all seems to work fine!!!
The abcdef user is now properly identified again. :)
Tnx a lot
A great way to
When I run startX it takes about 10 minutes for Xorg to begin. Changes have
been made to the system, but I don't know how to identify who the culprit
might be. Here's what I did before this started happening
2. Installed firefox using pkg_add
3. Unable to see firefox in KDE so reinstalled firefox
On Fri, 21 Oct 2005, Olaf Greve wrote:
# cd /etc
# pwd_mkdb master.passwd
# pwd_mkdb -p master.passwd
I made copies of /etc/passwd and /etc/master.passwd, then I ran the two
commands above and now it all seems to work fine!!!
The abcdef user is now properly identified again. :)
Great!
On Friday 21 October 2005 16.54, Adi Pircalabu wrote:
On Fri, 21 Oct 2005 16:35:05 +0200
Mikael Backman [EMAIL PROTECTED] wrote:
darkstar /home/mb 4:29:39pm %linux-firefox
/usr/X11R6/lib/linux-firefox/linux-firefox-bin: error while loading
shared libraries: libX11.so.6: cannot open shared
On Fri, 21 Oct 2005, Martin McCormick wrote:
As part of the formalization process for our carreer paths,
our organization is wanting us to be certified in our areas of expertise as part
of any on-going carreer path. Since I do all my work in Linux and
FreeBSD, what sorts of programs
On Fri, 21 Oct 2005 17:04:49 +0200
Mikael Backman [EMAIL PROTECTED] wrote:
I did installl x11/linux-XFree86-lib
How do I enable linux compatibility?
http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/linuxemu-lbc-install.html
--
Adi Pircalabu (PGP Key ID 0x04329F5E)
--
This
If you need a cert just to get a cert, and Linux is appropriate, I
think Red Hat has an offering that would probably be considered
industry standard.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Erik
Norgaard
Sent: Friday, October 21, 2005 11:08 AM
user [EMAIL PROTECTED] writes:
On 21 Oct 2005, Lowell Gilbert wrote:
The snapshot doesn't know what the bits in the file are. All it knows
is that the file's data used to be, say in block 1857 and now the
file's data are in block 1956. The fact that both blocks are
identical is not
On Friday 21 October 2005 17.16, Adi Pircalabu wrote:
On Fri, 21 Oct 2005 17:04:49 +0200
Mikael Backman [EMAIL PROTECTED] wrote:
I did installl x11/linux-XFree86-lib
How do I enable linux compatibility?
http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/linuxemu-lbc-inst
all.html
On Friday 21 October 2005 16.35, Mikael Backman wrote:
I've installed both the native firefox and linux-firefox and the
linuxpluginwrapper but when I check in firefox there are no plugins
installed... What is it I'm missing?
/clueless
___
How to get the best results from FreeBSD questions.
===
Last update $Date: 2005/08/10 02:21:44 $
This is a regular posting to the FreeBSD questions mailing list. If
you got it in answer to a message you sent, it means that the sender
thinks that
The trouble with books is that you can't update them the way you can a web page
or any other online documentation. The result is that most leading edge
computer books are out of date almost before they are printed. Unfortunately,
The Complete FreeBSD, published by O'Reilly, is no exception.
On Fri, Oct 21, 2005 at 12:01:00PM +, [EMAIL PROTECTED] wrote:
4. Re: removable usb media don't present devices to mount
(Ryan Zeigler)
--
On Thursday 20 October 2005 04:29 pm, you wrote:
Ryan Zeigler wrote:
I'm using FreeBSD 6.0-rc1, and I'm
IgnesAndros wrote:
Is the boot-only CD simply for installing? If it functions as a live CD,
does it include httpd and webmin? If not to either, can you help me find a
BSD-based distro that does?
Well, you can do some stuff from the boot-only CD, but not too much...
Take a look at FreeSBIE
As per the subject, Dell PE 830, with Intel 82801 SATA Controller that
is not recognized. Kind of. When I get to the boot loader, and type
lsdev, it shows the drive, recognizes the linux partitions that are on
it, but when I get to the sysinstall it says there's no drives found.
I've tried with
92 matches
Mail list logo