date:20060327

On Mon, 27 Mar 2006 01:01:33 -0900
Beech Rintoul [EMAIL PROTECTED] wrote:

 I'm trying to get linux-firefox running on a system that also has
 native firefox installed. When I try and start linux-firefox I get a
 message saying that firefox is already running (which it's not). I
 tried rebooting but the message remains. Does anyone have a
 suggestion?
 
 Beech

Check for .mozilla/firefox/[PROFILE_DIR]/.parentlock and remove it.
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]

Re: [Fwd: Re: package vs ports question]

2006-03-27 Thread Duane Whitty

Duane Whitty wrote:

 Original Message 
Subject: Re: package vs ports question
Date: Mon, 27 Mar 2006 07:57:04 -0300
From: Luiz Eduardo Guida Valmont [EMAIL PROTECTED]
To: Duane Whitty [EMAIL PROTECTED]
References: 
[EMAIL PROTECTED] 
[EMAIL PROTECTED]

And I also have a question regarding this matter. :)

When I installed FreeBSD (6.1-BETA4, though I don't think version
makes any difference here), I chose User in one of initial screens
(I can't remember which one that was now, sorry). That pre-selected a
handfull of software to be installed. I have always used ports since
FreeBSD was installed. But...

Does the installation process install any package that may be
overriden by any port?

Hi,

I am sorry but I do not understand what you are trying to ask.  Are you 
asking

if  using the ports system will change any software you installed when you
first installed FreeBSD?

I want to make sure that myself and others who may try to answer your 
question

understand what it is you are asking.

Sincerely,

--Duane

On 3/27/06, Duane Whitty [EMAIL PROTECTED] wrote:

Huy Ton That wrote:
 I am curious, the key different between packages and ports are that
packages
 are precompiled and ports are not?  Am I erroneous in this 
statement?  I'm

a
 little confused as I have been always using make install clean from 
the

 ports and don't see the difference...  Has anyone else had the same
 question?

 -Lee
 _

Hi,

Your best bet is to read the handbook section
on packages and ports.  To answer your question
though, yes packages are pre-built and ports need
to be compiled, linked, etc from sources.

http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/index.html

--Duane
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to 
[EMAIL PROTECTED]

___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to 
[EMAIL PROTECTED]

--
[]'s,
Luiz Eduardo

___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]

root password

2006-03-27 Thread Moe Zhank

hi...I have a freeBSD 2.0 that used as server for my local computers.
  because of the electrical hazard, my system had trouble.
  All of my password has lost !!!
  what should I do?
  I can't sign in anyway to my server...
  Please help me...
  Thank You
  
  
  Regards,
  
  
  Adi
  

-
New Yahoo! Messenger with Voice. Call regular phones from your PC for low, low 
rates.
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]

ADSL prob!

2006-03-27 Thread Mc Shch



  Hi sir:
I need your help.
I am using FreeBSD5.3 operating system,and I have configure
  etc/ppp/ppp.conf rightly.
  when I use ppp by typing this:

  #ppp -ddial papchap

  to connect to the internet with a ADSL modem.
  I recive this infomation:

  Working in ddial mode
  Using interface:tun0

  and i try to ping [1]www.baidu.com
  #ping [2]www.baidu.com
  ping:cannot resolve [3]www.baidu.com:Host name lookup failure

  and my webbrowser didnt work...
  I wonder how can i connect to internet and how to configure the
  system!!!
_

  使用世界上最大的电子邮件 系统― [4]MSN Hotmail Get 2 months FREE*.

References

  1. http://www.baidu.com/
  2. http://www.baidu.com/
  3. http://www.baidu.com/
  4. http://g.msn.com/8HMBCNCN/2749??PS=47575
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]

Re: [Fwd: Re: package vs ports question]

On Mon, 27 Mar 2006 07:15:07 -0400
Duane Whitty [EMAIL PROTECTED] wrote:

 Does the installation process install any package that may be
 overriden by any port?

yes. for example ,you select to install bash-3 from sysinstall (  the
freebsd installer UI ). this reads and installs the package
bash-3.x.y.z.tbz from somewhere in your selected setup origin (DVD /
CD / FTP / NFS).

I assume you would also install the ports collection and keep it up to
date (keeping a system up to date without the actual ports collection
in /usr/ports is , I guess, doable...though i've never done it, and I
dont see why I would want to, unless i'm in dire need of space).

Anyway, you update your ports, and you learn that bas-3.x.(y+1).b is
out. You can now install this new version from a package by either:
 a) downloading the package by hand and using 
   pkg_add /path/to/package/file 
 b) portupgrade -PP bash

Or you can install this from source, by doing either of:
 a) cd /usr/ports/shells/bash ; make install clean
 or
 b) portupgrade shells/bash

The option I've been using lately is a mix of both - use the package if
available (locally or from remote site); if not avail, build from
source and generate a package (so I can reinstall as needed in
other/same box):
 portupgrade -pP shells/bash

or

 cd /usr/ports/shells/bash ; make ; make deinstall ; make package
clean

 ( package generation doesnt work for ALL ports, but the vast
majority would be ok. For example ,Adobe Acrobate cannot be
redistributed in binary form, so a package cannot be generated. the
process will still work)

HIH,
Beto
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]

Re: mysql-server50 lacks supports for innodb ???


At 02:47 2006-03-27, Glenn Dawson wrote:

At 10:22 PM 3/26/2006, Ian Lord wrote:

Hi,

I just installed mysql-server50 port for the ports databases directory...

I compiled it using defaults

make
make install

and InnoDB is not available...

What's wrong with the port ???


I have mysql50-server built and installed with the defaults, and it 
has support for innodb.


What did you do to determine that your install does not have support?


I really don't know... It's a clean machine, just reinstalled freebsd 
and then I did a make and make install

in the ports /usr/ports/database/mysql50-server/

Obviously, I didn't use the without_innodb flag

When I try to create a innodb table by using
create table foo (bar mediumint(8)) ENGINE=InnoDB;

If I do a
show create table foo;
+---+--+
| Table | Create 
Table 
|

+---+--+
| foo  | CREATE TABLE `foo` (
  `bar` mediumint(8) default NULL
) ENGINE=MyISAM DEFAULT CHARSET=utf8 |
+---+--+

The innodb is not there it defaults back to myisam

Anyone knows what could be wrong ?

___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]

Re: mysql-server50 lacks supports for innodb ???


At 07:47 2006-03-27, Ian Lord wrote:

At 02:47 2006-03-27, Glenn Dawson wrote:

At 10:22 PM 3/26/2006, Ian Lord wrote:

Hi,

I just installed mysql-server50 port for the ports databases directory...

I compiled it using defaults

make
make install

and InnoDB is not available...

What's wrong with the port ???


I have mysql50-server built and installed with the defaults, and it 
has support for innodb.


What did you do to determine that your install does not have support?


I really don't know... It's a clean machine, just reinstalled 
freebsd and then I did a make and make install

in the ports /usr/ports/database/mysql50-server/

Obviously, I didn't use the without_innodb flag

When I try to create a innodb table by using
create table foo (bar mediumint(8)) ENGINE=InnoDB;

If I do a
show create table foo;
+---+--+
| Table | Create 
Table 
|

+---+--+
| foo  | CREATE TABLE `foo` (
  `bar` mediumint(8) default NULL
) ENGINE=MyISAM DEFAULT CHARSET=utf8 |
+---+--+

The innodb is not there it defaults back to myisam

Anyone knows what could be wrong ?


I just did a
mysql show engine innodb status;
ERROR 1235 (42000): Cannot call SHOW INNODB STATUS because 
skip-innodb is defined


So I see the server is really skipping innodb... just strange that 
the default install does this !
I'll try to figure out what config file I need to modify so this 
doesnt happen...


Thanks for your help

___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]

Fwd: package vs ports question

2006-03-27 Thread Luiz Eduardo Guida Valmont

Thanks for the answer. I just hope I'm not messing things too much.

So if a port may override a package, is the only solution to this
generate a package then install it? Now if this happens, what will
happen for example (supposing I install everything from packages - or
make package then pkg_add for that matter) when I install Adobe
Acrobat? Are all its dependancies going to be installed as well? I
mean, ports doesn't know which packages were installed by pkg_add,
which is how I suppose those packages are installed. Sorry if I cannot
make myself clear enough, but there's still the fog that blinds
newbies like me. :)

Is it possible to generate packages for all the dependancies? Does
make package do this for all packages for which a package can be
created? I hope I won't need to reinstall them but you know... you
never know. :)

Thanks again...
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]

Re: wdm and fluxbox help??

On Fri, 24 Feb 2006 10:25:21 -0700 (MST)
RYAN M. vAN GINNEKEN [EMAIL PROTECTED] wrote:

 I do not have an .xsession file in my home dir in fact i do not seem
 to have an .xsession or an xsession file anywhere on my system just
 Xsession see below

hey there - i know it's been a month..did u figure this out? 

you create a .xsession in your homedir if you haven't got one.

Beto
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]

Re: ports and interactivity

2006-03-27 Thread Bill Moran

On Sun, 26 Mar 2006 16:48:58 -0800
Ian A. Tegebo [EMAIL PROTECTED] wrote:
 I'm interested in knowing several things:
 
   1 When is a port interactive?
   2 Is there an easy way to determine the above?
   3 What are all the options for a given port?
 
 After doing some reading, I understand that one can learn about options
 in Makefiles, running make show-config, make show-options, or some
 other idiosyncratic method that seems to vary from port to port.
 
 In terms of question 1, there seems like there should be a
 IS_INTERACTIVE variable set in the Makefile but in the example of
 shells/bash-completion, there is no such variable and yet I was 
 presented with what I imagine was dialog prompting me to choose
 between bash2 and the newer bash3 (default shells/bash).
 
 I have a hidden agenda here.  I would like to be able to present
 portupgrade with a list of ports, preprocess all interactive ports
 before any actual building occurs, and then let portupgrade do its
 thing.  
 
 Now, I could use the BATCH variable to at least process all
 ports that aren't interactive but that hardly seems cool when there
 could be dependencies that are interactive (which would show up when I
 pass -rRn to portupgrade).
 
 I've also taken a cursory look at portmanager and portmaster but neither
 seem to fulfill my agenda.  It's not that I want to simply achieve
 automation, I want to do all the human work of evaluating options and
 making decisions up front (without all the tedious work of poking around in 
 Makefiles when there are already nice things like those dialog prompts).
 
 Has anyone gone down this road?  Does it not go anywhere?  Is there a
 better way to do this?  

All the interactive dialogs that I've seen store the result of your
choices in /var/db/ports.  As a result, you never see the dialog again
if you reinstall or upgrade the port.

You could establish a set of options on a scratch machine, then copy
the /var/db/ports directory to the new machines you are building.

Also, the portupgrade.conf file allows you to add command line options
for ports.  See the man page for details.

HTH.

-- 
Bill Moran
Collaborative Fusion Inc.
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]

Re: Fwd: package vs ports question

On Mon, 27 Mar 2006 09:57:49 -0300
Luiz Eduardo Guida Valmont [EMAIL PROTECTED] wrote:

 Thanks for the answer. I just hope I'm not messing things too much.

np :)

 
 So if a port may override a package, 

a port and a package are the same thing, in a different form :). the
tree structure under /usr/ports contains information about applications
ported to Freebsd. This information is used to compile each application
as needed for FBSD. You can do this yourself, therefore installing it
from the ports. 

Or you can use the binary output of that compilation that someone else
did, and which is provided to you in the form of a package.

You may want to , like I do, have a binary installer of the apps you
are running, which is why I mentioned how you create, from the
ports, your own packages (remember, 'package' = 'binary result of
building/compiling a port'). 

( if someone wants to clarify my explanation, PLEASE go ahead :) )

 is the only solution to this
 generate a package then install it? 

no

 Now if this happens, what will
 happen for example (supposing I install everything from packages - or
 make package then pkg_add for that matter) 

make package will actually make the package and install it for you, you
dont need to do a pkg_add after that (yes, a bit counter-intuitive, but
really handy)

 when I install Adobe
 Acrobat? Are all its dependancies going to be installed as well? 

yes, that's the beauty of using portinstall or portupgrade instead of
pkg_add (I think pkg_add resolves dependencies, but not as
cleverly/well as portinstall / portupgrade)

 I
 mean, ports doesn't know which packages were installed by pkg_add,
 which is how I suppose those packages are installed. Sorry if I cannot
 make myself clear enough, but there's still the fog that blinds
 newbies like me. :)
 
 Is it possible to generate packages for all the dependancies? Does
 make package do this for all packages for which a package can be
 created? I hope I won't need to reinstall them but you know... you
 never know. :)

portinstall -pP [section/port]

will do this for you for 'port' and all its build and run dependencies.

hasta luego,
Beto
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]

Re: ADSL prob!

On Mon, 27 Mar 2006 15:51:09 +0800
Mc Shch [EMAIL PROTECTED] wrote:


Hi there,


 
Hi sir:
  I need your help.
  I am using FreeBSD5.3 operating system,and I have configure
etc/ppp/ppp.conf rightly.
when I use ppp by typing this:
 
#ppp -ddial papchap
 
to connect to the internet with a ADSL modem.

What's the exact brand and model of your modem. how is your computer
connected to this modem?


I recive this infomation:
 
Working in ddial mode
Using interface:tun0
 
and i try to ping [1]www.baidu.com
#ping [2]www.baidu.com
ping:cannot resolve [3]www.baidu.com:Host name lookup failure
 
and my webbrowser didnt work...
I wonder how can i connect to internet and how to configure the
system!!!

what does /etc/resolv.conf show when you are connected ?

cheers,
Beto
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]

Re: what does this message means

2006-03-27 Thread Bill Moran

On Mon, 27 Mar 2006 09:28:33 +0500 (PKT)
Imran Imtiaz [EMAIL PROTECTED] wrote:

 I got the following in my daily security check logs. what does it mean?
 
 Mar 26 14:27:17 darkstar sshd[90821]: reverse mapping checking getaddrinfo 
 for genesis-27-156-16-del.genesipr.com failed - POSSIBLE BREAKIN ATTEMPT!

I means that whoever logged in came from an address with broken DNS.
Specifically, their reverse DNS doesn't match their forward DNS.

Unfortunately, these days it's not a good indicator of how dangerous
the origin is, as a lot of people seem incapable of correctly configuring
DNS.  But it is an indicator that you'll have difficulty tracking
down the source of the login.

-- 
Bill Moran
Collaborative Fusion Inc.
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]

Re: root password

On Sun, 26 Mar 2006 21:06:56 -0800 (PST)
Moe Zhank [EMAIL PROTECTED] wrote:

 hi...I have a freeBSD 2.0 that used as server for my local computers.
   because of the electrical hazard, my system had trouble.
   All of my password has lost !!! 

sorry to hear that.

   what should I do?

look up how to fix it, it's FAQ. recover root password or something
like that. I'm pretty certain it's in that wonderful resource, the
FreeBSD Handbook.

   I can't sign in anyway to my server...
( u shouldn't be logging in as root from a remote location... but
anyway))
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]

Re: ports and interactivity

2006-03-27 Thread RW

On Monday 27 March 2006 01:48, Ian A. Tegebo wrote:
 I'm interested in knowing several things:

   1 When is a port interactive?
   2 Is there an easy way to determine the above?
   3 What are all the options for a given port?
 ...
 Now, I could use the BATCH variable to at least process all
 ports that aren't interactive but that hardly seems cool when there
 could be dependencies that are interactive (which would show up when I
 pass -rRn to portupgrade).

BATCH stops INTERACTIVE ports being built, and causes other  ports to build 
with default options, using the port knobs  (as in WITH_FOO) to override 
the defaults.

Only a handfull  of ports are INTERACTIVE, usually because they require you to 
agree to a licence at install time. 

 I want to do all the human work of evaluating options and
 making decisions up front

Try this:


#!/bin/sh

# Get list of out-of-date ports
# This may take some time

plist=`pkg_version -ovl'' |awk '{ print $1 }'`

# allow each out-of-date port to update it's config, and that of any new
# dependencies (dialog only runs when something has changed)

for porg in $plist ; do
cd  /usr/ports/${porg}  make config-recursive
done

___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]

server crashing/deadlocking

2006-03-27 Thread Chris

A server running freebsd 6.0 stopped responding and recovered via
remote reboot mechanism.

Some points.

(a) I have no console access.
(b) I have to pay 100 euros an hour to have someone at the console and
this isnt a viable option.
(c) No serial console or kvm is available.

Every server we have had running 6.0 in production environments so far
has had some kind of stability issue, every server except this one
(this had 6.0 fresh install) ran very well on freebsd 5.x.

The problem in this case is that the server simply stopped responding
to everything, no log entries, no kernel panic logged everything just
stopped.  Is this a deadlock? if yes can debugging get it to log
anything to try and find the cause?

I had a look at the 6.1 todo list and it isnt pretty reading and it
seems 6.x has a fair few bugs, the server has sata hd's and I also
read about people upgrading to 6.1-prerelease to stop their sata
deadlocks.

I am not interested in people who want to tell me the hardware is
faulty, I can assure you it isnt.

I also want to know by enabling console.log will it catch everything
that pops up on the screen and if no how do I do that?

thanks

Chris
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 6.0-RELEASE-p5 #0: Fri Mar 17 06:52:56 CET 2006
[EMAIL PROTECTED]:/usr/obj/usr/src/sys/AQUARIUS
Timecounter i8254 frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) 4 CPU 3.00GHz (2999.94-MHz 686-class CPU)
  Origin = GenuineIntel  Id = 0xf43  Stepping = 3
  Features=0xbfebfbffFPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,C
MOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE
  Features2=0x649dSSE3,RSVD2,MON,DS_CPL,EST,CNTX-ID,CX16,b14
  AMD Features=0x2000LM
  Hyperthreading: 2 logical CPUs
real memory  = 1006305280 (959 MB)
avail memory = 975577088 (930 MB)
npx0: [FAST]
npx0: math processor on motherboard
npx0: INT 16 interface
acpi0: A M I OEMRSDT on motherboard
acpi0: Power Button (fixed)
pci_link0: ACPI PCI Link LNKA irq 10 on acpi0
pci_link1: ACPI PCI Link LNKB irq 5 on acpi0
pci_link2: ACPI PCI Link LNKC irq 11 on acpi0
pci_link3: ACPI PCI Link LNKD irq 0 on acpi0
pci_link4: ACPI PCI Link LNKE irq 0 on acpi0
pci_link5: ACPI PCI Link LNKF irq 0 on acpi0
pci_link6: ACPI PCI Link LNKG irq 0 on acpi0
pci_link7: ACPI PCI Link LNKH irq 0 on acpi0
Timecounter ACPI-fast frequency 3579545 Hz quality 1000
acpi_timer0: 24-bit timer at 3.579545MHz port 0x808-0x80b on acpi0
cpu0: ACPI CPU on acpi0
pcib0: ACPI Host-PCI bridge port 0xcf8-0xcff on acpi0
pci0: ACPI PCI bus on pcib0
pcib1: ACPI PCI-PCI bridge at device 1.0 on pci0
pci1: ACPI PCI bus on pcib1
pci1: display, VGA at device 0.0 (no driver attached)
atapci0: VIA 6420 SATA150 controller port 0xd400-0xd407,0xd000-0xd003,0xcc00-0
xcc07,0xc800-0xc803,0xc400-0xc40f,0xc000-0xc0ff irq 5 at device 15.0 on pci0
ata2: ATA channel 0 on atapci0
ata3: ATA channel 1 on atapci0
atapci1: VIA 8237 UDMA133 controller port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,
0xfc00-0xfc0f at device 15.1 on pci0
ata0: ATA channel 0 on atapci1
ata1: ATA channel 1 on atapci1
uhci0: VIA 83C572 USB controller port 0xd800-0xd81f irq 10 at device 16.0 on 
pci0
uhci0: [GIANT-LOCKED]
usb0: VIA 83C572 USB controller on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: VIA 83C572 USB controller port 0xdc00-0xdc1f irq 10 at device 16.1 on 
pci0
uhci1: [GIANT-LOCKED]
usb1: VIA 83C572 USB controller on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: VIA 83C572 USB controller port 0xe000-0xe01f irq 5 at device 16.2 on 
pci0
uhci2: [GIANT-LOCKED]
usb2: VIA 83C572 USB controller on uhci2
usb2: USB revision 1.0
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: VIA 83C572 USB controller port 0xec00-0xec1f irq 5 at device 16.3 on 
pci0
uhci3: [GIANT-LOCKED]
usb3: VIA 83C572 USB controller on uhci3
usb3: USB revision 1.0
uhub3: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0: VIA VT6202 USB 2.0 controller mem 0xfebff800-0xfebff8ff irq 11 at 
device 16.4 on pci0
ehci0: [GIANT-LOCKED]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: VIA VT6202 USB 2.0 controller on ehci0
usb4: USB revision 2.0
uhub4: VIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
isab0: PCI-ISA bridge at device 17.0 on pci0
isa0: ISA bus on isab0
pci0: multimedia, audio at device 17.5 (no driver attached)
vr0: VIA VT6102 Rhine II 10/100BaseTX port 0xe800-0xe8ff mem 0xfebffc00-0xfebf
fcff irq 10 at device 18.0 on pci0
miibus0: MII bus on vr0
ukphy0: Generic IEEE 802.3u media

Re: server crashing/deadlocking

2006-03-27 Thread albi

Chris wrote:

 A server running freebsd 6.0 stopped responding and recovered via
 remote reboot mechanism.
-- cut for brevity --
 I also want to know by enabling console.log will it catch everything
 that pops up on the screen and if no how do I do that?

yes, it should do that

-- 
grtjs, albi
gpg-key: lynx -dump http://scii.nl/~albi/gpg.asc | gpg --import
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]

Re: server crashing/deadlocking

2006-03-27 Thread Martin Hudec


Hello Chris,

Chris wrote:

I also want to know by enabling console.log will it catch everything
that pops up on the screen and if no how do I do that?


In /etc/syslog.conf look for line with console.info, uncomment it, and 
HUP down the syslogd process, or issue restart to /etc/rc.d/syslogd


Martin

___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]

Re: filling up UDP socket buffers like mad

2006-03-27 Thread Michael W. Lucas

On Fri, Mar 24, 2006 at 06:03:47PM -0500, Charles Swiger wrote:
 On Mar 24, 2006, at 4:17 PM, Michael W. Lucas wrote:
 Running FreeBSD 6.1-PRERELEASE as a DNS, dhcp, and syslog server.
 
 I'm having trouble with DNS, DHCP, and syslogd locking up, and I think
 I've found what they all share in common.
 
 During the lockups, the box starts dropping UDP due to full socket
 buffers.  I have a dumb little script to capture the rate of drops
 over 5 seconds, and it's about 45 a second.
 
 168725 dropped due to full socket buffers
 168958 dropped due to full socket buffers
 
 There is generally a cause behind the socket buffers filling up,  
 whether that is some form of livelock due to an OS problem or a  
 misconfiguration with a firewall/dummynet setup.  You could look at  
 the output of netstat -a(n) for insight as to where the packets are  
 being queued up, but netstat -s would be useful to show to us as well.

Thanks.  I think you've shown me how to find the problem:

# netstat -na
...
udp4   0  0  127.0.0.1.57058127.0.0.1.53   
udp4   0  0  127.0.0.1.61259127.0.0.1.53   
udp4   0  0  127.0.0.1.54240127.0.0.1.53   
udp4   0  0  127.0.0.1.52997127.0.0.1.53   
udp4   0  0  *.67   *.*
udp4   43414  0  *.514  *.*
udp4   0  0  *.49661*.*
...

We have no firewall on this machine; it's buried behind three layers
of firewall.

I've tried running syslogd in debug mode, but not found anything
particularly useful yet.  Syslogd is now set to restart every 15
minutes, and run in debug mode, so hopefully the next time this
happens I'll have the debugging output.  The problem happens even
within fifteen minutes, but because of my timeouts nobody notices.

I'm attaching the output of netstat -na and netstat -s for general
informative purposes; if anyone has any further suggestions, I'm all
ears.

Thanks,
==ml

-- 
Michael W. Lucas[EMAIL PROTECTED], [EMAIL PROTECTED]
http://www.BlackHelicopters.org/~mwlucas/

The cloak of anonymity protects me from the nuisance of caring. -Non Sequitur




Active Internet connections (including servers)
Proto Recv-Q Send-Q  Local Address  Foreign Address(state)
tcp4  96  0  10.184.1.11.53 10.184.1.8.49838   ESTABLISHED
tcp4 104  0  10.184.1.11.53 10.184.1.8.61719   ESTABLISHED
tcp4   0  0  127.0.0.1.6011 *.*LISTEN
tcp4   0 48  10.184.1.11.22 10.184.184.108.52392   ESTABLISHED
tcp4   0  0  127.0.0.1.6010 *.*LISTEN
tcp4   0  0  10.184.1.11.22 10.184.184.108.64567   ESTABLISHED
tcp4   0  0  *.199  *.*LISTEN
tcp4   0  0  *.80   *.*LISTEN
tcp4   0  0  127.0.0.1.25   *.*LISTEN
tcp4   0  0  *.22   *.*LISTEN
tcp4   0  0  127.0.0.1.953  *.*LISTEN
tcp4   0  0  127.0.0.1.53   *.*LISTEN
tcp4   0  0  10.184.3.248.53*.*LISTEN
tcp4   0  0  10.184.1.11.53 *.*LISTEN
udp4   0  0  127.0.0.1.59578127.0.0.1.53   
udp4   0  0  127.0.0.1.57058127.0.0.1.53   
udp4   0  0  127.0.0.1.61259127.0.0.1.53   
udp4   0  0  127.0.0.1.54240127.0.0.1.53   
udp4   0  0  127.0.0.1.52997127.0.0.1.53   
udp4   0  0  *.67   *.*
udp4   43414  0  *.514  *.*
udp4   0  0  *.49661*.*
udp4   0  0  *.52767*.*
udp4   0  0  *.63357*.*
udp4   0  0  127.0.0.1.58915127.0.0.1.5680 
udp4   0  0  127.0.0.1.62275127.0.0.1.5679 
udp4   0  0  127.0.0.1.57431127.0.0.1.5678 
udp4   0  0  *.63077*.*
udp4   0  0  *.161  *.*
udp4   0  0  *.57589*.*
udp4   0  0  *.5681 *.*
udp4   0  0  127.0.0.1.5680 *.*
udp4   0  0  127.0.0.1.5679 *.*
udp4   0  0  127.0.0.1.5678 *.*
udp4   0  0  *.64486*.*
udp4   0  0  *.53558*.*
udp4   0  0  127.0.0.1.123  *.*
udp4   0

Re: spamassassin build failure

2006-03-27 Thread Lowell Gilbert

Michael P. Soulier [EMAIL PROTECTED] writes:

 As I think I only went from perl 5.6 to 5.8, I'm surprised that so much would
 be out of date. Good to know though. Do the other scripting languages have
 this kind of support? Python?

Even among scripting languages, perl is unique in its pathological
lack of backward compatibility.  The FreeBSD maintainers do a nice job
of limiting the pain, but you *do* have to follow their directions.
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]

Western Digital combination usb/firewire hdd

2006-03-27 Thread Conrad J. Sabatier

I just added a 320-gig Western Digital external hard disk drive to
my amd64 RELENG_6 system (as /dev/da0).  The OEM docs recommend
connecting both the USB *and* the firewire cables for optimal
performance, which I've done.

What I'm wondering is: how does FreeBSD deal with such a setup?  Does it
favor one connection over the other, or does it actually use both?  It
seems I'm getting firewire throughput on the device (at bootup dmesg
reports 50 MB/s transfer rate, rather than the slower 12 MB/s USB
rate).

The device is working just fine, but I'm just curious about this, if
anyone has any clues.

Thanks!

-- 
Conrad J. Sabatier [EMAIL PROTECTED] -- In Unix veritas
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]

Re: filling up UDP socket buffers like mad

2006-03-27 Thread Chuck Swiger

Michael W. Lucas wrote:
 On Fri, Mar 24, 2006 at 06:03:47PM -0500, Charles Swiger wrote:
[ ... ]
 udp4   43414  0  *.514  *.*
 udp4   0  0  *.49661*.*
 ...
 
 We have no firewall on this machine; it's buried behind three layers
 of firewall.

Heh.  :-)  Well, it's pretty clear that the syslog traffic isn't being drained
by the syslog daemon properly.  I've seen syslogd get stuck like that if it was
forwarding logs to another host specified by name and not IP, and it was having
problems resolving it.

[ I've got a MacOS X 10.2(.9?) machine where syslogd is frozen upon boot now due
to using a non-local hostname to forward one specific type of traffic elsewhere,
so I have to kill -9 it and restart it by hand once the resolver has gotten
going, if I reboot that machine. ]

-- 
-Chuck
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]

Re: Fwd: package vs ports question


Luiz Eduardo Guida Valmont wrote:


Thanks for the answer. I just hope I'm not messing things too much.

So if a port may override a package, is the only solution to this
generate a package then install it? Now if this happens, what will
happen for example (supposing I install everything from packages - or
make package then pkg_add for that matter) when I install Adobe
Acrobat? Are all its dependancies going to be installed as well? I
mean, ports doesn't know which packages were installed by pkg_add,
which is how I suppose those packages are installed. Sorry if I cannot
make myself clear enough, but there's still the fog that blinds
newbies like me. :)
 



Sorry if I'm interjecting stupid stuff here .. . haven't yet backtracked
this thread.

What exactly do you mean, ports doesn't *know* which packages
were installed by pkg_add ... they use the same database, and as
far as the ports(7) mechanism is concerned, they are the same thing.

The difference is in the details visible to the user; as far as the ports
system is concerned, files is files, and port/package data is data.


Is it possible to generate packages for all the dependancies? Does
make package do this for all packages for which a package can be
created? I hope I won't need to reinstall them but you know... you
never know. :)

 



'make package' should include all dependencies, by my understanding;
however, my understanding isn't the greatest, so YMMV.



Thanks again...
 



HTH,

KDK

--
A drama critic is a person who surprises a playwright by informing him
what he meant.
-- Wilson Mizner

___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]

Re: filling up UDP socket buffers like mad

2006-03-27 Thread Freminlins

Michael,

On 3/27/06, Michael W. Lucas [EMAIL PROTECTED] wrote:

 # netstat -na
 udp4   43414  0  *.514  *.*


That's a big queue.

I'm attaching the output of netstat -na and netstat -s for general
 informative purposes; if anyone has any further suggestions, I'm all
 ears.



Try running syslogd with -n.

Thanks,
 ==ml


Frem.
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]

Re: filling up UDP socket buffers like mad

2006-03-27 Thread Michael W. Lucas

On Mon, Mar 27, 2006 at 10:22:18AM -0500, Chuck Swiger wrote:
 Michael W. Lucas wrote:
  On Fri, Mar 24, 2006 at 06:03:47PM -0500, Charles Swiger wrote:
 [ ... ]
  udp4   43414  0  *.514  *.*
  udp4   0  0  *.49661*.*
  ...
  
  We have no firewall on this machine; it's buried behind three layers
  of firewall.
 
 Heh.  :-)  Well, it's pretty clear that the syslog traffic isn't being drained
 by the syslog daemon properly.  I've seen syslogd get stuck like that if it 
 was
 forwarding logs to another host specified by name and not IP, and it was 
 having
 problems resolving it.

This *is* the loghost other hosts are forwarding their logs to.  So,
I'm pretty sure that's not it.  :-)

==ml

-- 
Michael W. Lucas[EMAIL PROTECTED], [EMAIL PROTECTED]
http://www.BlackHelicopters.org/~mwlucas/

The cloak of anonymity protects me from the nuisance of caring. -Non Sequitur
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]

Re: Sendmail and Jails

2006-03-27 Thread David Robillard

--

Message: 23
Date: Sat, 25 Mar 2006 19:32:01 -0500
From: Anish Mistry [EMAIL PROTECTED]
Subject: Re: Sendmail and Jails
To: freebsd-questions@freebsd.org
Cc: Jack Stone [EMAIL PROTECTED]
Message-ID: [EMAIL PROTECTED]
Content-Type: text/plain; charset=iso-8859-1

On Saturday 25 March 2006 18:42, Jack Stone wrote:
 I have been setting up jails on various production servers on
 FBSD-6.0  4.11.

 I was wondering how/where to configure  avoid the port conficts
 for sendmail as follows:

 - main host - all sendmail services in  out (or at least out)
 - jail - just outgoing services

 I gather I will need to configure one or the other on a non-std
 port as both will try to grab the same ports: 25  587

 Any tips appreciated.

Hi Jack,

Since all jails and the main host have their own IP address, it is
quite easy to do the setup you ask for. The idea here is to tell
sendmail(8) on which IP it should bind to. No need to fuss around with
ports or anything like that :o)

For the sake of example, let's say we have this:

main.host.com: 192.168.1.1
jail.host.com: 192.168.1.2

On the main host, make sure you have

sendmail_enable=YES

in /etc/rc.conf. This will tell sendmail to run and listen for outside requests.
Next, edit the /etc/mail/`uname -n`.mc file (make sure the uname(1)
command is enclosed in back-ticks).

sudo vi /etc/mail/`uname -n`.mc

Include whatever sendmail(8) MC macro configuration you need and make
sure you have this line which tells sendmail(8) to listen on
192.168.1.1 on TCP port 25.

DAEMON_OPTIONS(`Port=25, Addr=192.168.1.1, Name=MTA, Family=inet')dnl

Save the `uname -n`.mc file and restart sendmail:

cd /etc/mail
sudo make install restart

Make sure you check /var/log/maillog for any errors.

Now for the jails, you only have to configure sendmail in whatever way
you need and have this

sendmail_enable=NO

in /etc/rc.conf. This tells sendmail to process mail only if it is
originating from the localhost. I would recommend configuring each
jails as a sendmail null client to your main host. For example:

OSTYPE(`freebsd6')dnl
FEATURE(`nullclient', `main.host.com')dnl

Which will cause all jails to punt their mail directly to your
main.host.com machine.

If you're not sure about which ports are opened by sendmail in the
main host or the jails, run the sockstat(1) command.

Also, sendmail relies on DNS for everything, so make sure your DNS
systems is on par with the various hostnames you use. Otherwise,
you'll end up with long boot time and a whole bunch of broken mail
problems.

Finally, make sure you upgrade sendmail to version 8.13.6 because
previous versions contain a vulnerability. Install port mail/sendmail.
(this is my sendmail configuration in make.conf)

sudo vi /etc/make.conf

NO_SENDMAIL= true

SENDMAIL_CF_DIR=/usr/local/share/sendmail/cf

.if ${.CURDIR:M*/mail/sendmail}
SENDMAIL_WITHOUT_IPV6=yes \
SENDMAIL_WITHOUT_NIS=yes \
SENDMAIL_WITH_TLS=yes \
SENDMAIL_WITH_SMTPS=yes \
SENDMAIL_WITH_SASL=yes \
SENDMAIL_WITH_SASL2=yes \
SENDMAIL_WITH_LDAP=yes \
SENDMAIL_WITH_BERKELEYDB_VER=42 \
SENDMAIL_WITH_SOCKETMAP=yes \
# SENDMAIL_WITH_CYRUSLOOKUP=no \
SENDMAIL_WITH_PICKY_HELO_CHECK=yes \
SENDMAIL_WITH_SHARED_MILTER=yes
.endif

cd /usr/ports/mail/sendmail
sudo make install
sudo make mailer.conf
sudo make clean

Check if you're using the right one:

sendmail -bt -d0.1  /dev/null

Let me know if you need more assistance. Of course, YMMV.

Cheers,

David

--
David Robillard
UNIX systems admin, CISSP
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]

Re: filling up UDP socket buffers like mad

2006-03-27 Thread Michael W. Lucas

On Mon, Mar 27, 2006 at 04:29:31PM +0100, Freminlins wrote:
 Michael,
 
 On 3/27/06, Michael W. Lucas [EMAIL PROTECTED] wrote:
 
  # netstat -na
  udp4   43414  0  *.514  *.*
 
 
 That's a big queue.

Yep.  Mine is bigger than yours.  :-)

 I'm attaching the output of netstat -na and netstat -s for general
  informative purposes; if anyone has any further suggestions, I'm all
  ears.

 Try running syslogd with -n.

Trying now, thanks!

I'm also going to drop a line on hackers@, see if anyone over there is
interested in syslogd problems.

Thanks to everyone for the help.

==ml

-- 
Michael W. Lucas[EMAIL PROTECTED], [EMAIL PROTECTED]
http://www.BlackHelicopters.org/~mwlucas/

The cloak of anonymity protects me from the nuisance of caring. -Non Sequitur
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]

Re: Fwd: package vs ports question

2006-03-27 Thread RW

On Monday 27 March 2006 14:20, Norberto Meijome wrote:
 make package will actually make the package and install it for you, you
 dont need to do a pkg_add after that (yes, a bit counter-intuitive, but
 really handy)

Make package creates a package out of an installed port (it will install the 
port first, if neccessary). It doesn't install the package - there would be 
no point.
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]

Re: filling up UDP socket buffers like mad

2006-03-27 Thread Luiz Eduardo Guida Valmont

Could it be that you're under a DOS attack even though you're behind
three layers of firewall? =/ Try configuring a firewall to block
every UDP packet for every port except those needed by the services
you run.

On 3/27/06, Michael W. Lucas [EMAIL PROTECTED] wrote:
 On Fri, Mar 24, 2006 at 06:03:47PM -0500, Charles Swiger wrote:
  On Mar 24, 2006, at 4:17 PM, Michael W. Lucas wrote:
  Running FreeBSD 6.1-PRERELEASE as a DNS, dhcp, and syslog server.
  
  I'm having trouble with DNS, DHCP, and syslogd locking up, and I think
  I've found what they all share in common.
  
  During the lockups, the box starts dropping UDP due to full socket
  buffers.  I have a dumb little script to capture the rate of drops
  over 5 seconds, and it's about 45 a second.
  
  168725 dropped due to full socket buffers
  168958 dropped due to full socket buffers
 
  There is generally a cause behind the socket buffers filling up,
  whether that is some form of livelock due to an OS problem or a
  misconfiguration with a firewall/dummynet setup.  You could look at
  the output of netstat -a(n) for insight as to where the packets are
  being queued up, but netstat -s would be useful to show to us as well.

 Thanks.  I think you've shown me how to find the problem:

 # netstat -na
 ...
 udp4   0  0  127.0.0.1.57058127.0.0.1.53
 udp4   0  0  127.0.0.1.61259127.0.0.1.53
 udp4   0  0  127.0.0.1.54240127.0.0.1.53
 udp4   0  0  127.0.0.1.52997127.0.0.1.53
 udp4   0  0  *.67   *.*
 udp4   43414  0  *.514  *.*
 udp4   0  0  *.49661*.*
 ...

 We have no firewall on this machine; it's buried behind three layers
 of firewall.

 I've tried running syslogd in debug mode, but not found anything
 particularly useful yet.  Syslogd is now set to restart every 15
 minutes, and run in debug mode, so hopefully the next time this
 happens I'll have the debugging output.  The problem happens even
 within fifteen minutes, but because of my timeouts nobody notices.

 I'm attaching the output of netstat -na and netstat -s for general
 informative purposes; if anyone has any further suggestions, I'm all
 ears.

 Thanks,
 ==ml

 --
 Michael W. Lucas  [EMAIL PROTECTED], [EMAIL PROTECTED]
   http://www.BlackHelicopters.org/~mwlucas/

 The cloak of anonymity protects me from the nuisance of caring. -Non
 Sequitur








--
[]'s,
Luiz Eduardo
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]

Re: Fwd: package vs ports question

2006-03-27 Thread Donald J. O'Neill

On Monday 27 March 2006 09:26, Kevin Kinsey wrote:
 Luiz Eduardo Guida Valmont wrote:
 Thanks for the answer. I just hope I'm not messing things too much.
 
 So if a port may override a package, is the only solution to this
 generate a package then install it? Now if this happens, what will
 happen for example (supposing I install everything from packages -
  or make package then pkg_add for that matter) when I install
  Adobe Acrobat? Are all its dependancies going to be installed as
  well? I mean, ports doesn't know which packages were installed by
  pkg_add, which is how I suppose those packages are installed. Sorry
  if I cannot make myself clear enough, but there's still the fog
  that blinds newbies like me. :)

 Sorry if I'm interjecting stupid stuff here .. . haven't yet
 backtracked this thread.

 What exactly do you mean, ports doesn't *know* which packages
 were installed by pkg_add ... they use the same database, and as
 far as the ports(7) mechanism is concerned, they are the same thing.

 The difference is in the details visible to the user; as far as the
 ports system is concerned, files is files, and port/package data is
 data.

 Is it possible to generate packages for all the dependancies? Does
 make package do this for all packages for which a package can be
 created? I hope I won't need to reinstall them but you know... you
 never know. :)

 'make package' should include all dependencies, by my understanding;
 however, my understanding isn't the greatest, so YMMV.

 Thanks again...

 HTH,

 KDK

'make package' will install the missing dependencies but will only make 
a package of the the port being installed. If you want to make a 
package of the dependent ports you need to use 'make 
package-recursive'. Be advised, probably somewhere in the build of the 
packages, something will be missing and it will break. At least, it 
always has for me. So, packages are built for some of the dependent 
ports, but not for others.

You need to check that /usr/ports/packages exists and if it doesn't, do 
a 'mkdir /usr/ports/packages', otherwise the built packages are put in 
the port. Not a really convenient place.

I very seldom build packages anymore.

Don
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]

Re: Fwd: package vs ports question

2006-03-27 Thread Donald J. O'Neill

On Monday 27 March 2006 09:49, RW wrote:
 On Monday 27 March 2006 14:20, Norberto Meijome wrote:
  make package will actually make the package and install it for you,
  you dont need to do a pkg_add after that (yes, a bit
  counter-intuitive, but really handy)

 Make package creates a package out of an installed port (it will
 install the port first, if neccessary). It doesn't install the
 package - there would be no point.
 ___

'make install' builds a package from the port and installs it. 'make 
package' builds a package and installs it, it also saves it in 
compressed form so it can be reinstalled if necessary. 

A port is a skeleton, it contains the information needed to build a 
package and that's it. The ports aren't installed, it's the package 
that results from building a port that is installed. Ports are only 
skeletons, the contain the information necessary to allow the port to 
be built into an installable package. 

Don
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]

Re: DVD-Slideshow

2006-03-27 Thread Chris Maness


[EMAIL PROTECTED] wrote:

package sox is not installed
package ImageMagick is not installed
package dvdauthor is not installed
package ffmpeg is not installed



you might want to look at this as well: my guess is that for the
fade-issue, you will need ImageMagick.

that will probably solve your problems.

regards,

usleep


On 3/27/06, [EMAIL PROTECTED] [EMAIL PROTECTED] wrote:
  

apparently the scripts needs certain temporary ppms to generate the
fade: these are not found.

what is your inputfile?

regards,

usleep

On 3/27/06, Chris Maness [EMAIL PROTECTED] wrote:


I'm trying to debug dvd-slideshow.  When I try to run a slideshow with
cross fades.  In the output of the script I get.

cp:
/usr/home/chris/pics/slideshow/dvd-slideshow_temp_7298/fade_0014.ppm:
Bad address

Any ideas as to what this means?  I have attached the output for the
whole run.


  


  
dvd-slideshow queries the rpm database to see if said packages are 
installed.  That is why it complains that they are not installed even 
though they are.

___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]

RE: what does this message means

2006-03-27 Thread fbsd_user

It means a attacker who has camouflaged his real identity found
your ssh port open and was trying to gain access, but ssh's
security did its job and denied access just like it's designed to
do.

-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Imran
Imtiaz
Sent: Sunday, March 26, 2006 11:29 PM
To: freebsd-questions@freebsd.org
Subject: what does this message means


I got the following in my daily security check logs. what does it
mean?

Mar 26 14:27:17 darkstar sshd[90821]: reverse mapping checking
getaddrinfo for genesis-27-156-16-del.genesipr.com failed - POSSIBLE
BREAKIN ATTEMPT!
Mar 26 14:27:22 darkstar sshd[90823]: reverse mapping checking
getaddrinfo for genesis-27-156-16-del.genesipr.com failed - POSSIBLE
BREAKIN ATTEMPT!
Mar 26 14:27:26 darkstar sshd[90825]: reverse mapping checking
getaddrinfo for genesis-27-156-16-del.genesipr.com failed - POSSIBLE
BREAKIN ATTEMPT!
Mar 26 14:27:30 darkstar sshd[90827]: reverse mapping checking
getaddrinfo for genesis-27-156-16-del.genesipr.com failed - POSSIBLE
BREAKIN ATTEMPT!
Mar 26 14:27:35 darkstar sshd[90836]: reverse mapping checking
getaddrinfo for genesis-27-156-16-del.genesipr.com failed - POSSIBLE
BREAKIN ATTEMPT!

regards,
Imran

___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to
[EMAIL PROTECTED]

___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]

package vs ports question

2006-03-27 Thread Luiz Eduardo Guida Valmont

Wow, I stopped following this thread for a few hours and now I can just
compile a mini-ports howto. ^^ So, first things first: thanks for all who
replied. All replies were meaningful, so thank you all.

Kevin, what I didn't know was the fact that ports and packages share the
same database. Knowing that was really helpful and cleared most doubts I
had.

Donald, I didn't know about make package-recursive and I think I won't try
it, for now. My system is almost  completly installed and the missing
packages won't take that much to justify creating the packages to ease
future installations (well, in fact I hope I never need to reinstall FreeBSD
^^). I may try it, though, just to see how it works.

One last question: is there a way to find what are the standard targets for
any given port? I know I could install bash-completion, but I don't it is
100% reliable (I think it may miss some targets if Makefiles are included,
but I may be wrong).

Once again, thank you all.


On 3/27/06, Donald J. O'Neill [EMAIL PROTECTED] wrote:

 On Monday 27 March 2006 09:49, RW wrote:
  On Monday 27 March 2006 14:20, Norberto Meijome wrote:
   make package will actually make the package and install it for you,
   you dont need to do a pkg_add after that (yes, a bit
   counter-intuitive, but really handy)
 
  Make package creates a package out of an installed port (it will
  install the port first, if neccessary). It doesn't install the
  package - there would be no point.
  ___

 'make install' builds a package from the port and installs it. 'make
 package' builds a package and installs it, it also saves it in
 compressed form so it can be reinstalled if necessary.

 A port is a skeleton, it contains the information needed to build a
 package and that's it. The ports aren't installed, it's the package
 that results from building a port that is installed. Ports are only
 skeletons, the contain the information necessary to allow the port to
 be built into an installable package.

 Don
 ___
 freebsd-questions@freebsd.org mailing list
 http://lists.freebsd.org/mailman/listinfo/freebsd-questions
 To unsubscribe, send any mail to 
 [EMAIL PROTECTED]




--
[]'s,
Luiz Eduardo
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]

Re: DVD-Slideshow

2006-03-27 Thread Chris Maness


[EMAIL PROTECTED] wrote:

ok, is dvd-slide able to find them?

is composite in the path?

regards,

usleep

On 3/27/06, Chris Maness [EMAIL PROTECTED] wrote:
  

[EMAIL PROTECTED] wrote:


package sox is not installed
package ImageMagick is not installed
package dvdauthor is not installed
package ffmpeg is not installed



you might want to look at this as well: my guess is that for the
fade-issue, you will need ImageMagick.

that will probably solve your problems.

regards,

usleep


On 3/27/06, [EMAIL PROTECTED] [EMAIL PROTECTED] wrote:

  

apparently the scripts needs certain temporary ppms to generate the
fade: these are not found.

what is your inputfile?

regards,

usleep

On 3/27/06, Chris Maness [EMAIL PROTECTED] wrote:



I'm trying to debug dvd-slideshow.  When I try to run a slideshow with
cross fades.  In the output of the script I get.

cp:
/usr/home/chris/pics/slideshow/dvd-slideshow_temp_7298/fade_0014.ppm:
Bad address

Any ideas as to what this means?  I have attached the output for the
whole run.



  
  

dvd-slideshow queries the rpm database to see if said packages are
installed.  That is why it complains that they are not installed even
though they are.
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]




  

Do you have the port installed?  My installation of it is the latest.

Here is where composite is locate:

[EMAIL PROTECTED] whereis composite
composite: /usr/local/bin/composite /usr/local/man/man1/composite.1.gz

___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]

help needed - GBDE mounts on top of FUSE sshfs (fails)

2006-03-27 Thread Ensel Sharon


Hi,

I have posted this before on -questions and -hackers, and gotten no
response.

Basically, I have remote storage that I can access over ssh (from
rsync.net, who I _love_) and I use sshfs in FreeBSD 6.0 ports tree to
mount my filesystem locally.  I followed this FreeBSD sshfs tutorial:

http://www.rsync.net/resources/howto/freebsd_sshfs.html

The good news is, it works great.  The bad news is, I cannot create a GBDE
in the mounted sshfs.  Here are the details:

When I place the backing-store-file (for my GBDE) on a mounted sshfs
(fuse) volume, it no longer works.  Specifically, when I issue command:

gbde init /dev/md0 -i -L /etc/gbde/md0

and save the resulting file that opens in my editor (without making any
changes, as usual), after typing in my passphrase twice, I get this error:

Enter new passphrase:
Reenter new passphrase: 
gbde: write: Input/output error
#


Is this expected ?  Is this a specific problem with fuse-fs, or would this
fail if I tried to put the backing store on any kind of other mounted
abnormal filesystem ? (say an NFS mount, or another md-backed mount point)

Any comments ?  I really want an offsite encrypted volume.  I have the
offsite from rsync.net, and the transport is encrypted via sshfs, but I am
paranoid and do not want them (or anyone) to see the contants, so I want
to just upload a single 2gig file and make a GBDE on it.

thanks.


___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]

Re: Sendmail and Jails

2006-03-27 Thread Jack Stone

From: David Robillard [EMAIL PROTECTED]
To: FreeBSD Questions Mailing List freebsd-questions@freebsd.org
CC: Jack Stone [EMAIL PROTECTED]
Subject: Re: Sendmail and Jails
Date: Mon, 27 Mar 2006 10:44:29 -0500

--

Message: 23
Date: Sat, 25 Mar 2006 19:32:01 -0500
From: Anish Mistry [EMAIL PROTECTED]
Subject: Re: Sendmail and Jails
To: freebsd-questions@freebsd.org
Cc: Jack Stone [EMAIL PROTECTED]
Message-ID: [EMAIL PROTECTED]
Content-Type: text/plain; charset=iso-8859-1

On Saturday 25 March 2006 18:42, Jack Stone wrote:
 I have been setting up jails on various production servers on
 FBSD-6.0  4.11.

 I was wondering how/where to configure  avoid the port conficts
 for sendmail as follows:

 - main host - all sendmail services in  out (or at least out)
 - jail - just outgoing services

 I gather I will need to configure one or the other on a non-std
 port as both will try to grab the same ports: 25  587

 Any tips appreciated.

Hi Jack,

Since all jails and the main host have their own IP address, it is
quite easy to do the setup you ask for. The idea here is to tell
sendmail(8) on which IP it should bind to. No need to fuss around with
ports or anything like that :o)

For the sake of example, let's say we have this:

main.host.com: 192.168.1.1
jail.host.com: 192.168.1.2

On the main host, make sure you have

sendmail_enable=YES

in /etc/rc.conf. This will tell sendmail to run and listen for outside 
requests.

Next, edit the /etc/mail/`uname -n`.mc file (make sure the uname(1)
command is enclosed in back-ticks).

sudo vi /etc/mail/`uname -n`.mc

Include whatever sendmail(8) MC macro configuration you need and make
sure you have this line which tells sendmail(8) to listen on
192.168.1.1 on TCP port 25.

DAEMON_OPTIONS(`Port=25, Addr=192.168.1.1, Name=MTA, Family=inet')dnl

Save the `uname -n`.mc file and restart sendmail:

cd /etc/mail
sudo make install restart

Make sure you check /var/log/maillog for any errors.

Now for the jails, you only have to configure sendmail in whatever way
you need and have this

sendmail_enable=NO

in /etc/rc.conf. This tells sendmail to process mail only if it is
originating from the localhost. I would recommend configuring each
jails as a sendmail null client to your main host. For example:

OSTYPE(`freebsd6')dnl
FEATURE(`nullclient', `main.host.com')dnl

Which will cause all jails to punt their mail directly to your
main.host.com machine.

If you're not sure about which ports are opened by sendmail in the
main host or the jails, run the sockstat(1) command.

Also, sendmail relies on DNS for everything, so make sure your DNS
systems is on par with the various hostnames you use. Otherwise,
you'll end up with long boot time and a whole bunch of broken mail
problems.

Finally, make sure you upgrade sendmail to version 8.13.6 because
previous versions contain a vulnerability. Install port mail/sendmail.
(this is my sendmail configuration in make.conf)

sudo vi /etc/make.conf

NO_SENDMAIL= true

SENDMAIL_CF_DIR=/usr/local/share/sendmail/cf

.if ${.CURDIR:M*/mail/sendmail}
SENDMAIL_WITHOUT_IPV6=yes \
SENDMAIL_WITHOUT_NIS=yes \
SENDMAIL_WITH_TLS=yes \
SENDMAIL_WITH_SMTPS=yes \
SENDMAIL_WITH_SASL=yes \
SENDMAIL_WITH_SASL2=yes \
SENDMAIL_WITH_LDAP=yes \
SENDMAIL_WITH_BERKELEYDB_VER=42 \
SENDMAIL_WITH_SOCKETMAP=yes \
# SENDMAIL_WITH_CYRUSLOOKUP=no \
SENDMAIL_WITH_PICKY_HELO_CHECK=yes \
SENDMAIL_WITH_SHARED_MILTER=yes
.endif

cd /usr/ports/mail/sendmail
sudo make install
sudo make mailer.conf
sudo make clean

Check if you're using the right one:

sendmail -bt -d0.1  /dev/null

Let me know if you need more assistance. Of course, YMMV.

Cheers,

David

--
David Robillard
UNIX systems admin, CISSP

David: Thank you so much for this detailed howto on my question of 
configuring sendmail to handle both the main host and a jail on the same 
ports -- the info I found in the sendmail readme said to use different 
ports, (like 925  987) but if you advice works, this is great!

I wondered how I was going to use a bunch of jails without jumping thru 
hoops!

Thanks again.

_
Dont just search. Find. Check out the new MSN Search! 
http://search.msn.click-url.com/go/onm00200636ave/direct/01/

___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]

Re: Fwd: package vs ports question

2006-03-27 Thread RW

On Monday 27 March 2006 17:02, Donald J. O'Neill wrote:
 On Monday 27 March 2006 09:49, RW wrote:
  On Monday 27 March 2006 14:20, Norberto Meijome wrote:
   make package will actually make the package and install it for you,
   you dont need to do a pkg_add after that (yes, a bit
   counter-intuitive, but really handy)
 
  Make package creates a package out of an installed port (it will
  install the port first, if neccessary). It doesn't install the
  package - there would be no point.
  ___

 'make install' builds a package from the port and installs it. 'make
 package' builds a package and installs it, it also saves it in
 compressed form so it can be reinstalled if necessary.

My point was that it doesn't create a package file and then install it, which 
is  how I read it. 

There is a strong unwritten convention in the language  of FreeBSD that you 
don't refer to installing from a port as installing a package - even though 
it's technically correct. 
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]

Re: Cheap FreeBSD hosting?

On Fri, 24 Mar 2006 07:53:50 -0900, Peter Giessel wrote:
 
 $8/month for what you were getting was a steal.

I agree. I was otherwise happy. However this buyout is going to be bad, I
fear. And the OS change makes me feel hypocritical since I have Powered
by FreeBSD all over my pages and actively promote it. 

___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]

Re: Cheap FreeBSD hosting?

On Sat, 25 Mar 2006 22:44:36 -0800, Sam Nilsson wrote:

 iweb.ca a canadian company has good deals on dedicated servers. mine has 
 been up since i got it which makes 129 days now. there have been no 
 network interruptions that i've been aware of in that time.
 
 i don't know how their shared hosting plans work though...

Thanks for the lead, but looks like I'd have to pay 5X as much per month
($40) for half the space on their shared hosting. :(

___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]

Re: Cheap FreeBSD hosting?

On Fri, 24 Mar 2006 13:48:21 -0500, RJ wrote:

   http://www.layeredtech.com/layer1.php?g=13

Those are for dedicated servers where the cheapest is $65/month. I guess I
don't see how that is a suitable-replacement for my needs and budget...?

___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]

Re: Fw: Low perf of i386 6.0 on dell poweredge 1850 bi-Xeon 2.8ghzDualCore

2006-03-27 Thread Eric


Hi,

Still my performance problem ( for resume mysql three time slower on freebsd 
6.0 than 4.11).
In fact I do new test on several server and several freebsd release and now 
be quiet sure that problem come from amr driver.

I install 6.0 on other server with perc4 and have same very low performance.

To resume : when doing diskinfo -v -t amrd0 with freebsd 6.0 or 5.4 on
 - bi-xeon 3Ghz and scsi 15.000t hdd on perc4di Raid1 card  I have 
slower results than on

 - simple AMD 2800+ with ide discs.

I have same server with freebsd 4.11 and perfs are 2 or three time better.
If it may help I also try freebsd 5.3, it was better but again very fare 
from 4.11.


Does anybody know what may goes wrong with default config of  freebsd 5.4, 
6.0 or 6.1 beta4?
Is there special things to do with amr driver? ( I try with/without smp, 
acpi but anything change)


Thanks for help as it seems to be quiet stupid to have bi-xeon dualcore and 
install freebsd 4.11.


Eric.

___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]

Re: Upgrade to latest 4.x release from 4.6

On Mon, Mar 27, 2006 at 06:34:30PM +1100, Wee-Sern Soo wrote:
 Hello,
 
 I'm interested in upgrading an older version of FreeBSD 4.6.x to the 
 latest 4.x release.  How does one do so?

One starts by reading the handbook.

Kris


pgpa87wMcdkMN.pgp
Description: PGP signature

Re: Fw: Low perf of i386 6.0 on dell poweredge 1850 bi-Xeon 2.8ghzDualCore

On Mon, Mar 27, 2006 at 09:14:12PM +0200, Eric wrote:
 Hi,
 
 Still my performance problem ( for resume mysql three time slower on 
 freebsd 6.0 than 4.11).
 In fact I do new test on several server and several freebsd release and now 
 be quiet sure that problem come from amr driver.
 I install 6.0 on other server with perc4 and have same very low performance.

You never responded to my questions.

Kris


pgpjB7IH6pILN.pgp
Description: PGP signature

scsi tape drives

2006-03-27 Thread Mohan Singh

According to FAQ 4.3.3, SCSI tape drives are supported. I'm looking at
getting a Dell PowerVault 124T Autoloader LTO-3 system.

This product has an Ultra-2 SCSI interface, can I reasonably assume
that I can run this machine via a FreeBSD system and it will work?

I am aware that I might have issues with the software that will
interface to this drive (right now we are looking at Bacula), but
right now I want to make sure that there are no issues at the
hardware-OS level.
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]

Re: Cyrus-IMAP disallowing clear text connections

2006-03-27 Thread Erik Nørgaard


Anish Mistry wrote:

On Sunday 26 March 2006 16:37, Erik Nørgaard wrote:

Cyrus-IMAP accepts unencrypted connections _and_ authentication
even though I have set the following in imapd.conf

   allowplaintext: yes
   allowplainwithouttls: no

How do I force the use of TLS for Cyrus-IMAP?

Also: Postfix allows hiding authentication mechanisms unless TLS is
invoked (so in clear text, capabilities just show STARTTLS), while
Cyrus-IMAP announces everything. Is there anyway to be more strict
with the cyrus in respect of what it announces?



sasl_minimum_layer: 128


Thanks, but that doesn't do it, everything still goes through nice and 
clear unless I set the client to use TLS.


Erik

--
Ph: +34.666334818  web: www.locolomo.org
S/MIME Certificate: www.daemonsecurity.com/ca/8D03551FFCE04F06.crt
Subject ID:  9E:AA:18:E6:94:7A:91:44:0A:E4:DD:87:73:7F:4E:82:E7:08:9C:72
Fingerprint: 5B:D5:1E:3E:47:E7:EC:1C:4C:C8:3A:19:CC:AE:14:F5:DF:18:0F:B9
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]

Re: Cheap FreeBSD hosting?

2006-03-27 Thread Tim Traver


Scott,

Not exactly sure what your needs are, but we have a shared hosting 
system that uses FreeBSD as its back end, and we offer competitive 
features and prices, with a really cool control panel...


Our main package for domains is only $12.99/mo and you get 750MB of 
disk, 15GB of transfer per month, and all the other features that you 
would expect from a high end web hosting company.


And we didn't just go out and buy someone's hosting platform software, 
we built our own from scratch, using FreeBSD as the base operating 
system to provide a fully redundant shared hosting system that can 
handle all of your needs.


Go to http://www.simplenet.com/ and check it out...

Tim.


Scott I. Remick wrote:

On Fri, 24 Mar 2006 13:48:21 -0500, RJ wrote:

  

  http://www.layeredtech.com/layer1.php?g=13



Those are for dedicated servers where the cheapest is $65/month. I guess I
don't see how that is a suitable-replacement for my needs and budget...?

___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
  

___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]

Re: scsi tape drives

2006-03-27 Thread John Cruz


There shouldn't be any issues with it, bacula should do the trick nicely.

Mohan Singh wrote:

According to FAQ 4.3.3, SCSI tape drives are supported. I'm looking at
getting a Dell PowerVault 124T Autoloader LTO-3 system.

This product has an Ultra-2 SCSI interface, can I reasonably assume
that I can run this machine via a FreeBSD system and it will work?

I am aware that I might have issues with the software that will
interface to this drive (right now we are looking at Bacula), but
right now I want to make sure that there are no issues at the
hardware-OS level.
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]

  


___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]

Re: package vs ports question


Luiz Eduardo Guida Valmont wrote:


Wow, I stopped following this thread for a few hours and now I can just
compile a mini-ports howto. ^^ So, first things first: thanks for all who
replied. All replies were meaningful, so thank you all.

Kevin, what I didn't know was the fact that ports and packages share the
same database. Knowing that was really helpful and cleared most doubts I
had.

Donald, I didn't know about make package-recursive and I think I won't try
it, for now. My system is almost  completly installed and the missing
packages won't take that much to justify creating the packages to ease
future installations (well, in fact I hope I never need to reinstall FreeBSD
^^). I may try it, though, just to see how it works.

One last question: is there a way to find what are the standard targets for
any given port? I know I could install bash-completion, but I don't it is
100% reliable (I think it may miss some targets if Makefiles are included,
but I may be wrong).

Once again, thank you all.
 



Well, this is where RTF*M, UTSL, and so on probably come in.  Not
that RTFMming is a lot of fun, mind you; but I'm not using it to insult
you, either.

First, there's ports(7).  Then, since the ports system uses
make(1), that's one to read, I'd guess.  Make(1) points you
over to read make.conf(5).  Ports(7) says this:


BUGS
Ports documentation is split over four places --
/usr/ports/Mk/bsd.port.mk, The Porter's Handbook, the ``Packages and
Ports'' chapter of The FreeBSD Handbook, and this manual page.

So, those would be some places to start, too (most of which come
in the doc distribution, and is on the website and mirrors, of course.

And as for UTSL (that's use the Source, Luke, right?) you could
read about 14,000 ports Makefiles, if you had time.  Hopefully a few
select ones might suffice

I don't know if anyone's got a totally complete handle on the entire
system.  People like Mr. Kennaway and many other committers come
close, I'm sure ... but I imagine their knowledge came from RTFM,
and experience, just like most everyone else's**.

HTH,

Kevin Kinsey

*Yeah, that's Read The Friendly Manual.  Those who say otherwise,
well, they're not friendly, I guess  :D

**Not to mention that an author/programmer is generally pretty
familiar with his work ... up to a point (which is where commenting
your code comes in, eh? ;-)

--
Never have children, only grandchildren.
-- Gore Vidal


___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]

anyone using /usr/ports/misc/upclient, read this ...

2006-03-27 Thread Marc G. Fournier



It appears that uptimes.hostingwired.com is dead, so anyone using this 
client, and never checks your stats ... there are no stats to check 
anymore ...


if you go to http://www.uptimes-project.org, that appears to be where its 
moved to ... for awhile there, they were 'importing' the old stats from 
hostingwired.com, but since you can't access it anymore, neither can they, 
so you have to create a new host there ...


only change to upclient.conf is to point it to uptimes-project.org and 
change your 'auth key' ...


nobody appears to 'own the port', but it doesn't look like they have 
changed the client itself, still at 5.0b8:


http://www.uptimes-project.org/files/upclient-5.0b8.tar.gz




Marc G. Fournier   Hub.Org Networking Services (http://www.hub.org)
Email: [EMAIL PROTECTED]   Yahoo!: yscrappy  ICQ: 7615664
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]

Postfix inside a jail

2006-03-27 Thread Vaaf



Hello!

I'm trying to get FreeBSD 4.11-RELEASE, postfix-2.1.6,1 and 
mysql-5.0.16 working.


Even though the setup seems flawless, it won't work.

/var/log/maillog is empty. The maillog.N files are all 122 bytes. So 
nothing there.

Syslog is running, and it is configured to log to maillog.

This is what I did:

--- MySQL

CREATE DATABASE IF NOT EXISTS mail;
GRANT ALL ON mail.* TO [EMAIL PROTECTED] IDENTIFIED BY 'lalalas_password';

USE mail;
CREATE TABLE IF NOT EXISTS alias (
  address varchar(255) NOT NULL default '',
  goto text NOT NULL,
  domain varchar(255) NOT NULL default '',
  created datetime NOT NULL default '-00-00 00:00:00',
  modified datetime NOT NULL default '-00-00 00:00:00',
  active tinyint(1) NOT NULL default '1',
  PRIMARY KEY (address),
  KEY address (address)
) TYPE=MyISAM COMMENT='Aliases';

USE mail;
CREATE TABLE IF NOT EXISTS domain (
  domain varchar(255) NOT NULL default '',
  description varchar(255) NOT NULL default '',
  aliases int(10) NOT NULL default '0',
  mailboxes int(10) NOT NULL default '0',
  maxquota int(10) NOT NULL default '0',
  transport varchar(255) default NULL,
  backupmx tinyint(1) NOT NULL default '0',
  created datetime NOT NULL default '-00-00 00:00:00',
  modified datetime NOT NULL default '-00-00 00:00:00',
  active tinyint(1) NOT NULL default '1',
  PRIMARY KEY (domain),
  KEY domain (domain)
) TYPE=MyISAM COMMENT='Domains';

USE mail;
CREATE TABLE IF NOT EXISTS mailbox (
  username varchar(255) NOT NULL default '',
  password varchar(255) NOT NULL default '',
  name varchar(255) NOT NULL default '',
  maildir varchar(255) NOT NULL default '',
  quota int(10) NOT NULL default '0',
  domain varchar(255) NOT NULL default '',
  created datetime NOT NULL default '-00-00 00:00:00',
  modified datetime NOT NULL default '-00-00 00:00:00',
  active tinyint(1) NOT NULL default '1',
  PRIMARY KEY (username),
  KEY username (username)
) TYPE=MyISAM COMMENT='Mailboxes';

USE mail;
INSERT INTO domain (domain) VALUES ('lalaladomain.com');
INSERT INTO alias (address, goto) VALUES ('[EMAIL PROTECTED]', 
'[EMAIL PROTECTED]');


--- main.cf

mail_owner = postfix
home_mailbox = .maildir/

queue_directory = /var/spool/postfix
command_directory = /usr/local/sbin
daemon_directory = /usr/local/libexec/postfix
mailbox_command = /usr/local/bin/procmail

mydomain = lalaladomain.com
myhostname = fosho.lalaladomain.com
mynetworks = 213.21.123.0/24, 127.0.0.0/8

myorigin = $mydomain
mydestination = $mydomain, localhost.$mydomain, $myhostname

debug_peer_level = 2
debugger_command =
PATH=/usr/bin:/usr/X11R6/bin
xxgdb $daemon_directory/$process_name $process_id  sleep 5
sendmail_path = /usr/local/sbin/sendmail
newaliases_path = /usr/local/bin/newaliases
mailq_path = /usr/local/bin/mailq
setgid_group = maildrop
manpage_directory = /usr/local/man
sample_directory = /usr/local/etc/postfix
readme_directory = no
html_directory = no

# mkdir /var/spool/virtual
# chown -R postfix:postfix /var/spool/virtual
# chmod -R 771 /var/spool/virtual

virtual_transport = virtual
virtual_uid_maps = static:125
virtual_gid_maps = static:125
virtual_mailbox_base = /var/spool/virtual
virtual_mailbox_domains = mysql:/usr/local/etc/postfix/v_domain.cf
virtual_mailbox_maps = mysql:/usr/local/etc/postfix/v_mailbox.cf
virtual_alias_maps = mysql:/usr/local/etc/postfix/v_alias.cf

broken_sasl_auth_clients = yes
smtpd_sasl_auth_enable = yes
smtpd_sasl_local_domain = $myhostname
smtpd_sasl_security_options = noanonymous
smtpd_sasl_application_name = smtpd

# openssl req -new -x509 -nodes -out smtpd.pem -keyout smtpd.pem -days 3650

smtp_use_tls = yes
smtpd_use_tls = yes
smtp_tls_note_starttls_offer = yes
smtpd_tls_key_file = /usr/local/etc/postfix/ssl/smtpd.pem
smtpd_tls_cert_file = /usr/local/etc/postfix/ssl/smtpd.pem
smtpd_tls_CAfile = /usr/local/etc/postfix/ssl/smtpd.pem
smtpd_tls_loglevel = 1
smtpd_tls_received_header = yes
smtpd_tls_session_cache_timeout = 3600s
tls_random_source = dev:/dev/urandom

unknown_local_recipient_reject_code = 450

--- v_alias.cf

user = postfix
password = lalalas_password
dbname = mail
table = alias
select_field = goto
where_field = address

--- rc.conf

sendmail_enable=YES
sendmail_flags=-bd
sendmail_outbound_enable=NO
sendmail_submit_enable=NO
sendmail_msp_queue_enable=NO

However, mails to [EMAIL PROTECTED] doesn't arrive at [EMAIL PROTECTED]
I've used this setup on other boxes where they've worked just fine.

Any idea?

Thanks,
Vaaf

___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]

nxserver

2006-03-27 Thread Logan McNaughton

How on earth can i get nxserver working, i installed freenx and nxserver, i
add an nx-user (logan) and i can start nxserver

when i go to connect on my windows box, i get this:

NX 203 NXSSH running with pid: 3808
NX 285 Enabling check on switch command
NX 285 Enabling skip of SSH config files
NX 200 Connected to address: 192.168.2.183 on port: 22
NX 202 Authenticating user: nx
NX 208 Using auth method: publickey
HELLO NXSERVER - Version 1.4.0-04-CVS OS (GPL)
NX 105 hello NXCLIENT - Version 1.5.0
NX 134 Accepted protocol: 1.5.0
NX 105 SET SHELL_MODE SHELL
NX 105 SET AUTH_MODE PASSWORD
NX 105 login
NX 101 User: logan
NX 102 Password:
NX 103 Welcome to: comBSD user: logan
NX 105 listsession --user=logan --status=suspended,running
--geometry=1024x768x32+render --type=unix-default
NX 127 Sessions list of user 'logan'

Display UsernameRemote IP   Session ID
--- --- --- 
1005logan192.168.2.1243D89CA497741F05931CA80C95511C38E
NX 105 listsession --user=logan --status=suspended,running
--geometry=1024x768x32+render --type=unix-default
NX 127 Sessions list of user 'logan'

Display UsernameRemote IP   Session ID
--- --- --- 
1005logan192.168.2.1243D89CA497741F05931CA80C95511C38E
NX 105 listsession --user=logan --status=suspended,running
--geometry=1024x768x32+render --type=unix-default
NX 127 Sessions list of user 'logan'

Display UsernameRemote IP   Session ID
--- --- --- 
1005logan192.168.2.1243D89CA497741F05931CA80C95511C38E
NX 105 startsession --session=comBSD --type=unix-default --cache=8M
--images=32M --cookie=3447adfd742cdfb9048a3b29baf1ae7d --link=lan
--virtualdesktop=1 --kbtype=pc102/ca --nodelay=1
--backingstore=never --geometry=fullscreen --media=0 --agent_server=
--agent_user= --agent_password= --agent_domain=
--screeninfo=1024x738x32+render

NX 1000 NXNODE - Version 1.4.0-04-CVS OS (GPL)
NX 700 Session id: comBSD-1011-E7B5743BB258368FDFB23AA0C9B2AE70
NX 705 Session display: 1011
NX 703 Session type: unix-default
NX 701 Proxy cookie: 95b80cefd574bf41b916f529d12ad101
NX 702 Proxy IP: 192.168.2.124
NX 706 Agent cookie: 3447adfd742cdfb9048a3b29baf1ae7d
NX 704 Session cache: unix-default
NX 707 SSL tunneling: 0
NX 105 NX 504 Session startup failed.
NX 1004 Error: nxagent failed to start. Session timed out.
NX 1001 Bye.
Killed by signal 15.

I think its a problem with ssh, any suggestions?
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]

Re: nxserver

On Mon, Mar 27, 2006 at 12:55:12PM -0700, Logan McNaughton wrote:
 How on earth can i get nxserver working, i installed freenx and nxserver, i
 add an nx-user (logan) and i can start nxserver

Probably a question for the nxserver developers.

Kris


pgpGH8BJBi4og.pgp
Description: PGP signature

Re: Postfix inside a jail

2006-03-27 Thread albi

On Mon, 27 Mar 2006 21:54:53 +0200
Vaaf [EMAIL PROTECTED] wrote:

 I'm trying to get FreeBSD 4.11-RELEASE, postfix-2.1.6,1 and 
 mysql-5.0.16 working.
 
 Even though the setup seems flawless, it won't work.
 
 /var/log/maillog is empty. The maillog.N files are all 122 bytes. So 
 nothing there.
 Syslog is running, and it is configured to log to maillog.
--- cut ---
 However, mails to [EMAIL PROTECTED] doesn't arrive at
 [EMAIL PROTECTED] I've used this setup on other boxes where they've
 worked just fine.

within a jail or not ?

i use several postfix-instances in jails and host, but with this option
in /usr/local/etc/postfix/main.cf :

inet_interfaces = 192.168.111.111
# where 192.168.111.111 is the ip-address of the jail

-- 
grtjs, albi
gpg-key: lynx -dump http://scii.nl/~albi/gpg.asc | gpg --import
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]

Re: scsi tape drives

2006-03-27 Thread Jerry McAllister

 
 According to FAQ 4.3.3, SCSI tape drives are supported. I'm looking at
 getting a Dell PowerVault 124T Autoloader LTO-3 system.
 
 This product has an Ultra-2 SCSI interface, can I reasonably assume
 that I can run this machine via a FreeBSD system and it will work?
 
 I am aware that I might have issues with the software that will
 interface to this drive (right now we are looking at Bacula), but
 right now I want to make sure that there are no issues at the
 hardware-OS level.

I have not used an autoloader, but have used the LTO drives on
a SCSI controller and they work fine - just like a real tape drive.

jerry

 ___
 freebsd-questions@freebsd.org mailing list
 http://lists.freebsd.org/mailman/listinfo/freebsd-questions
 To unsubscribe, send any mail to [EMAIL PROTECTED]
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]

sendmail error messages

I am running  FreeBSD  4.3  (see  uname -a  below) and have
recently started getting the following message:
Mar 25 23:28:15  sendmail[1181]: k2Q3wGR00214: SYSERR(root): hash map Alias0: 
unsafe map file /etc/mail/aliases.db: World writable directory

It repeats with IDs  1298 ,  1328 ,  1357 ,  1439 ,  1466 ,   1491  in 
the brackets after 'sendmail'.  What significance is there to these numbers?
I checked  /etc/mail/aliases.db  with 'll -d' and got
-rw-r--r--  1 root  wheel  32768 Jun 12  2001 /etc/mail/aliases.db
and as you can see it is not World writable.  What is going on, and how
do I stop these messages?

 
FreeBSD  4.3-RELEASE FreeBSD 4.3-RELEASE #0: Sat Apr 21 10:54:49 GMT 2001
 [EMAIL PROTECTED]:/usr/src/sys/compile/GENERIC  i386



___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]

Re: Postfix inside a jail

2006-03-27 Thread Vaaf


At 22:06 27.03.2006, albi wrote:

On Mon, 27 Mar 2006 21:54:53 +0200
Vaaf [EMAIL PROTECTED] wrote:

 I'm trying to get FreeBSD 4.11-RELEASE, postfix-2.1.6,1 and
 mysql-5.0.16 working.

 Even though the setup seems flawless, it won't work.

 /var/log/maillog is empty. The maillog.N files are all 122 bytes. So
 nothing there.
 Syslog is running, and it is configured to log to maillog.
--- cut ---
 However, mails to [EMAIL PROTECTED] doesn't arrive at
 [EMAIL PROTECTED] I've used this setup on other boxes where they've
 worked just fine.

within a jail or not ?


No, where it worked it was not within jails.



i use several postfix-instances in jails and host, but with this option
in /usr/local/etc/postfix/main.cf :

inet_interfaces = 192.168.111.111
# where 192.168.111.111 is the ip-address of the jail

--
grtjs, albi
gpg-key: lynx -dump http://scii.nl/~albi/gpg.asc | gpg --import


Didn't seem to make any difference.
I still keep mynetworks right?

Vaaf 


___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]

The 'Amnesiac' screen s set up when FreeBSD starts up

When  FreeBSD  starts up, you see a screen (on an  IBM PC )
with a heading line that says:
FreeBSD/i386 (Amnesiac) (ttyv0)
It is followed by a blank line and a login: line.  There are 7 other
like screens with heading lines that differ in the digit following
ttyv, in those it ranges from  1  to  7 .  One moves from one of these 
screens to the one that announced itself as  ttyvj  by depressing
an  Alt  key and the function key labelled  j+1  simultaneously.
If one is in  Xwindows , one switches to screen  ttyvj  by depressing
 CtrlAlt  keys and the function key labelled  j+1  simultaneously.  One 
can return to the  Xwindows  screen by depressing an  Alt  key and 
the function key labelled  9  simultaneously.

Is there a command that tells one on which screen one now
sits, and if so what is its path-name?  Where are these screens
set up, and can one change that, say adding new screens?


___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]

Re: sendmail error messages

2006-03-27 Thread Charles Swiger


On Mar 27, 2006, at 3:26 PM, [EMAIL PROTECTED] wrote:
Mar 25 23:28:15  sendmail[1181]: k2Q3wGR00214: SYSERR(root): hash  
map Alias0:

unsafe map file /etc/mail/aliases.db: World writable directory

	It repeats with IDs  1298 ,  1328 ,  1357 ,  1439 ,  1466 ,
1491  in the brackets after 'sendmail'.  What significance is there  
to these numbers?


Those of the process IDs of new sendmail child processes which start  
up and abort.



I checked  /etc/mail/aliases.db  with 'll -d' and got
-rw-r--r--  1 root  wheel  32768 Jun 12  2001 /etc/mail/aliases.db
and as you can see it is not World writable.  What is going on, and  
how

do I stop these messages?


See this section of /usr/src/contrib/sendmail/README:

+---+
| DIRECTORY PERMISSIONS |
+---+

Sendmail often gets blamed for many problems that are actually the
result of other problems, such as overly permissive modes on  
directories.

For this reason, sendmail checks the modes on system directories and
files to determine if they can be trusted.  For sendmail to run without
complaining, you MUST execute the following command:

chmod go-w / /etc /etc/mail /usr /var /var/spool /var/spool/ 
mqueue
chown root / /etc /etc/mail /usr /var /var/spool /var/spool/ 
mqueue



...there's also a DontBlameSendmail option which disables the  
security checks, but you're better off fixing the issue directly.


(You could also check out mtree.)

--
-Chuck

___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]

Re: Postfix inside a jail

2006-03-27 Thread albi

On Mon, 27 Mar 2006 22:30:44 +0200
Vaaf [EMAIL PROTECTED] wrote:

 i use several postfix-instances in jails and host, but with this
 option in /usr/local/etc/postfix/main.cf :
 
 inet_interfaces = 192.168.111.111
 # where 192.168.111.111 is the ip-address of the jail
 
-- cut --
 Didn't seem to make any difference.

did you apply this for host + all jails ? restarted all the postfix-es
and checked with ps whether they're all running ?

 I still keep mynetworks right?

see here more info about the inet_interfaces option :
http://www.postfix.org/postconf.5.html#inet_interfaces

afaik it doesn't influence the mynetworks settings at all


-- 
grtjs, albi
gpg-key: lynx -dump http://scii.nl/~albi/gpg.asc | gpg --import
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]

Re: The 'Amnesiac' screen s set up when FreeBSD starts up

2006-03-27 Thread Charles Swiger


On Mar 27, 2006, at 3:36 PM, [EMAIL PROTECTED] wrote:

Is there a command that tells one on which screen one now
sits, and if so what is its path-name?  Where are these screens
set up, and can one change that, say adding new screens?


The tty command will indicate which terminal the shell is  
associated with.  There are kernel options which can be changed to  
let you setup more or fewer virtual TTY's; see man vt...


--
-Chuck

___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]

User unknown?

2006-03-27 Thread Guillaume R.

Hello
I'm trying to setup (for the first time under FreeBSD!) my usual setup
to read my mail (postfix+fm+procmail+mutt)
But I got a serious problem: when I try to fetch the mails for my user
those mails dont go in /var/mail/my_user but *always* in
/var/mail/root...
I read all the mails I receive from the system and I could see that on
this box my_user is...unknown so I can't having those mails in a
normal way.
Does anyone could help me by telling me which files I must modify so
that it works (I suppose I got to change my hostname too but I cant
find any /etc/hostname file...)
Thx
PS:btw does anyone remember the option so that fetchmail fetch *all*
the mails (the one non-read and the other one read as well)?
Thx again
--
Powered by FreeBSD 6.O
http://www.freebsd.org
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]

CDROM and data on it

I am running  FreeBSD  4.3  (see  uname -a  below) and I have only used 
the  CDROM  to install new versions of  FreeBSD .  Now I want to use it for 
file storage.  What programs must I have to be able to read from and write to a 
 CDROM ?  What is the structure of information on a  CDROM ?  If it is a  
FreeBSD  file system, how do I  mount  the device, or does  mount -ing it cause 
it to be considered a file system and that isn't what I want?  If I want to 
share a  CDROM  with  MSDOS  systems, how would I  mount  it (as an  MSDOS  
file system)?  What about listing the files and directories (if any) on it?
Are the programs the same for  FreeBSD 6.0 ?


FreeBSD  4.3-RELEASE FreeBSD 4.3-RELEASE #0: Sat Apr 21 10:54:49 GMT 2001 
[EMAIL PROTECTED]:/usr/src/sys/compile/GENERIC  i386



___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]

Suggestions for FreeBSD development

Where are suggestions (for FreeBSD development) to be sent?
To this (the questions site), or the hackers site, or some other site?

___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]

Re: The 'Amnesiac' screen s set up when FreeBSD starts up

2006-03-27 Thread Micah


Charles Swiger wrote:

On Mar 27, 2006, at 3:36 PM, [EMAIL PROTECTED] wrote:

Is there a command that tells one on which screen one now
sits, and if so what is its path-name?  Where are these screens
set up, and can one change that, say adding new screens?


The tty command will indicate which terminal the shell is associated 
with.  There are kernel options which can be changed to let you setup 
more or fewer virtual TTY's; see man vt...


---Chuck


You can set up more/fewer by editing /etc/ttys
See man ttys

HTH,
Micah


___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]

3ware 9550SX-8LP RAID help

2006-03-27 Thread Huy Ton That

Hello I just purchased a new server and was installing FBSD.  It currently
has 2 internal harddrives which are working and mountable.  Additionally
there are 3 hotswappable hdds which are connected to a 3ware 9550sx-8LP raid
5/0 controller card.  Everything has been configured properly within the
controller's bios.  However, the controller is not detected during boot
time.

I found out that the 'twa' drivers should take care of this, and after
consulting the online manpages I saw...  however it said FreeBSD 7.0 below
at the bottom of the online manpage...

*HARDWARE* 
http://www.freebsd.org/cgi/man.cgi?query=twasektion=4manpath=FreeBSD+7.0-current#end
 The *twa* driver supports the following SATA RAID controllers:

 *·* AMCC's 3ware 9500S-4LP
 *·* AMCC's 3ware 9500S-8
 *·* AMCC's 3ware 9500S-8MI
 *·* AMCC's 3ware 9500S-12
 *·* AMCC's 3ware 9500S-12MI
 *·* AMCC's 3ware 9500SX-4LP
 *·* AMCC's 3ware 9500SX-8LP
 *·* AMCC's 3ware 9500SX-12
 *·* AMCC's 3ware 9500SX-12MI
 *·* AMCC's 3ware 9500SX-16ML
 *·* AMCC's 3ware 9550SX-4LP
 *·* AMCC's 3ware 9550SX-8LP
 *·* AMCC's 3ware 9550SX-12
 *·* AMCC's 3ware 9550SX-12MI
 *·* AMCC's 3ware 9550SX-16ML

The odd thing is that when I do man twa locally on the machine, this is all
I have on my list:

 o   AMCC's 3ware 9500S-4LP
 o   AMCC's 3ware 9500S-8
 o   AMCC's 3ware 9500S-8MI
 o   AMCC's 3ware 9500S-12
 o   AMCC's 3ware 9500S-12MI

Is this just what is supported for FreeBSD 6.0?

I tried loading the twa locally from the box and received the following
message:

kldload twa
module_register: module pci/twa already exists!
Module pci/twa failed to register: 17
kldload: can't load twa: File exists

kldunload twa
kldunload: can't find file twa: No such file or directory

uname -a

FreeBSD localhost.CASO 6.0-RELEASE FreeBSD 6.0-RELEASE #0: Thu Nov  3
09:36:13 UTC 2005
[EMAIL PROTECTED]:/usr/obj/usr/src/sys/GENERIC  i386


localhost# cat /var/run/dmesg.boot
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 6.0-RELEASE #0: Thu Nov  3 09:36:13 UTC 2005
[EMAIL PROTECTED]:/usr/obj/usr/src/sys/GENERIC
ACPI APIC Table: IntelR AWRDACPI
Timecounter i8254 frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) 4 CPU 2.80GHz (2792.06-MHz 686-class CPU)
  Origin = GenuineIntel  Id = 0xf29  Stepping = 9

Features=0xbfebfbffFPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE
  Features2=0x4400CNTX-ID,b14
real memory  = 535691264 (510 MB)
avail memory = 514867200 (491 MB)
ioapic0 Version 2.0 irqs 0-23 on motherboard
ioapic1 Version 2.0 irqs 24-47 on motherboard
npx0: [FAST]
npx0: math processor on motherboard
npx0: INT 16 interface
acpi0: IntelR AWRDACPI on motherboard
acpi0: Power Button (fixed)
pci_link0: ACPI PCI Link LNKA irq 10 on acpi0
pci_link1: ACPI PCI Link LNKB irq 11 on acpi0
pci_link2: ACPI PCI Link LNKC irq 11 on acpi0
pci_link3: ACPI PCI Link LNKD irq 5 on acpi0
pci_link4: ACPI PCI Link LNKE irq 0 on acpi0
pci_link5: ACPI PCI Link LNKF irq 0 on acpi0
pci_link6: ACPI PCI Link LNK0 irq 0 on acpi0
pci_link7: ACPI PCI Link LNK1 irq 9 on acpi0
Timecounter ACPI-fast frequency 3579545 Hz quality 1000
acpi_timer0: 24-bit timer at 3.579545MHz port 0x408-0x40b on acpi0
cpu0: ACPI CPU on acpi0
acpi_button0: Power Button on acpi0
pcib0: ACPI Host-PCI bridge port 0xcf8-0xcff on acpi0
pci0: ACPI PCI bus on pcib0
pcib1: ACPI PCI-PCI bridge at device 3.0 on pci0
pci1: ACPI PCI bus on pcib1
em0: Intel(R) PRO/1000 Network Connection, Version - 2.1.7 port
0xb000-0xb01f mem 0xf600-0xf601 irq 18 at device 1.0 on pci1
em0: Ethernet address: 00:30:48:87:be:ec
em0:  Speed:N/A  Duplex:N/A
pcib2: ACPI PCI-PCI bridge at device 28.0 on pci0
pci2: ACPI PCI bus on pcib2
pci2: mass storage, RAID at device 1.0 (no driver attached)
uhci0: UHCI (generic) USB controller port 0xe100-0xe11f irq 16 at device
29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: UHCI (generic) USB controller on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: UHCI (generic) USB controller port 0xe000-0xe01f irq 19 at device
29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: UHCI (generic) USB controller on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
pci0: base peripheral at device 29.4 (no driver attached)
pci0: base peripheral, interrupt controller at device 29.5 (no driver
attached)
ehci0: EHCI (generic) USB 2.0 controller mem 0xf610-0xf61003ff irq 23
at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
usb2: EHCI version 1.0
usb2: companion

Installing a custom kernel with sysinstall over NFS

2006-03-27 Thread Josh Endries

-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1

Hello,

I have NFS+PXE installs working, but I need quotas enabled. I haven't
seen any way to do this other than a custom kernel, so I need to have
sysinstall push a custom build kernel out instead of the default one. I
copied the disc1 ISO to a directory, /var/export/6.0-RELEASE, and I need
to update this with my custom kernel but I don't really know how. I
found where it keeps the base distribution gz files, now how do I get
my new kernel into there?

I read online about making a release, and it seems I should go into my
/usr/src and do a make release chrootdir=/var/export/6.0-RELEASE, is
this correct or is there an easier way to do this? The machine isn't too
fast, it takes overnight to build a kernel, so if there's a better way
that would rock. I could copy my files and make my own gz's but I'm
hoping there's a better way, or a way to fetch a different kernel, or
something.

Thanks,
Josh
-BEGIN PGP SIGNATURE-
Version: GnuPG v1.4.2.2 (FreeBSD)

iD8DBQFEKF24V/+PyAj2L+IRAmo4AJ4sARPUBGPlIAsKHxGUSFEO5NgrxQCfeXAc
nU5UrDcblkM5VOG2SyQhCec=
=7/fG
-END PGP SIGNATURE-
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]

Re: User unknown?

2006-03-27 Thread Erik Nørgaard


Guillaume R. wrote:

Hello
I'm trying to setup (for the first time under FreeBSD!) my usual setup
to read my mail (postfix+fm+procmail+mutt)
But I got a serious problem: when I try to fetch the mails for my user
those mails dont go in /var/mail/my_user but *always* in
/var/mail/root...
I read all the mails I receive from the system and I could see that on
this box my_user is...unknown so I can't having those mails in a
normal way.
Does anyone could help me by telling me which files I must modify so
that it works (I suppose I got to change my hostname too but I cant
find any /etc/hostname file...)
Thx
PS:btw does anyone remember the option so that fetchmail fetch *all*
the mails (the one non-read and the other one read as well)?
Thx again


Sounds like you're coming from Linux?

Did you add the user? can you login as that user?

If you pasted the user info into master.passwd then you need run 
pwd_mkdb to update the db files. If you pasted into passwd, then that's 
not the way to do it.


Use pw(8) to add users and keep files correctly updated.

You set hostname in rc.conf.

Cheers, Erik
--
Ph: +34.666334818  web: www.locolomo.org
S/MIME Certificate: www.daemonsecurity.com/ca/8D03551FFCE04F06.crt
Subject ID:  9E:AA:18:E6:94:7A:91:44:0A:E4:DD:87:73:7F:4E:82:E7:08:9C:72
Fingerprint: 5B:D5:1E:3E:47:E7:EC:1C:4C:C8:3A:19:CC:AE:14:F5:DF:18:0F:B9
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]

Re: 3ware 9550SX-8LP RAID help

2006-03-27 Thread Erik Trulsson

On Mon, Mar 27, 2006 at 04:35:18PM -0500, Huy Ton That wrote:
 Hello I just purchased a new server and was installing FBSD.  It currently
 has 2 internal harddrives which are working and mountable.  Additionally
 there are 3 hotswappable hdds which are connected to a 3ware 9550sx-8LP raid
 5/0 controller card.  Everything has been configured properly within the
 controller's bios.  However, the controller is not detected during boot
 time.
 
 I found out that the 'twa' drivers should take care of this, and after
 consulting the online manpages I saw...  however it said FreeBSD 7.0 below
 at the bottom of the online manpage...
 
 *HARDWARE* 
 http://www.freebsd.org/cgi/man.cgi?query=twasektion=4manpath=FreeBSD+7.0-current#end

As can be seen in the link, that is the manpage for 7-CURRENT.

  The *twa* driver supports the following SATA RAID controllers:
 
  *·*   AMCC's 3ware 9500S-4LP
  *·*   AMCC's 3ware 9500S-8
  *·*   AMCC's 3ware 9500S-8MI
  *·*   AMCC's 3ware 9500S-12
  *·*   AMCC's 3ware 9500S-12MI
  *·*   AMCC's 3ware 9500SX-4LP
  *·*   AMCC's 3ware 9500SX-8LP
  *·*   AMCC's 3ware 9500SX-12
  *·*   AMCC's 3ware 9500SX-12MI
  *·*   AMCC's 3ware 9500SX-16ML
  *·*   AMCC's 3ware 9550SX-4LP
  *·*   AMCC's 3ware 9550SX-8LP
  *·*   AMCC's 3ware 9550SX-12
  *·*   AMCC's 3ware 9550SX-12MI
  *·*   AMCC's 3ware 9550SX-16ML
 
 The odd thing is that when I do man twa locally on the machine, this is all
 I have on my list:
 
  o   AMCC's 3ware 9500S-4LP
  o   AMCC's 3ware 9500S-8
  o   AMCC's 3ware 9500S-8MI
  o   AMCC's 3ware 9500S-12
  o   AMCC's 3ware 9500S-12MI
 
 Is this just what is supported for FreeBSD 6.0?

Yes, that is all the devices that twa supported when 6.0 was made.
Support for the 95x0SX cards have been added since.
The upcoming 6.1 should support all the devices that 7-CURRENT supports.

 
 I don't know what else to do, does anyone know how to get this recognized?
 I've spent all morning trying to get this figured out :/.

Try one of the 6.1 betas.  It ought to work.


-- 
Insert your favourite quote here.
Erik Trulsson
[EMAIL PROTECTED]
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]

Dual xeon

2006-03-27 Thread Aguiar Magalhaes

Hi list,

We´ve received a xeon dual processor machine, Intel
motherboard...

What´s the best versionplatform for it ?? i386, ia64
??

Thanks,

Aguiar



___ 
Yahoo! Acesso Grátis - Internet rápida e grátis. Instale o discador agora! 
http://br.acesso.yahoo.com
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]

Re: CDROM and data on it

2006-03-27 Thread Lowell Gilbert

[EMAIL PROTECTED] [EMAIL PROTECTED] writes:

   I am running FreeBSD 4.3 (see uname -a below) and I have only
   used the CDROM to install new versions of FreeBSD .  Now I
   want to use it for file storage.  What programs must I have to
   be able to read from and write to a CDROM ?  What is the
   structure of information on a CDROM ?  If it is a FreeBSD file
   system, how do I mount the device, or does mount -ing it cause
   it to be considered a file system and that isn't what I want?
   If I want to share a CDROM with MSDOS systems, how would I
   mount it (as an MSDOS file system)?  What about listing the
   files and directories (if any) on it?

Please read the documentation:
http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/creating-cds.html

   Are the programs the same for  FreeBSD 6.0 ?

Yes.
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]

Re: Dual xeon


At 17:35 2006-03-27, Aguiar Magalhaes wrote:

Hi list,

We´ve received a xeon dual processor machine, Intel
motherboard...

What´s the best versionplatform for it ?? i386, ia64
??


Hi, first of all, from what I know ia64 won't 
work... That release is for the itanium kinda cpus...
You have the choice between amd64 version (it 
works with processor having the emt64 extensions 
like the xeon) or the i386 version.


If all you need will be compiled from the ports, 
I highly recommend the amd64 version...
If you are planning on installing precompiled 
binairies you'll find that there is no support 
nowhere for the amd64 version so I recommend to use i386


Hope  this helps



___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]

Re: Dual xeon

On Mon, Mar 27, 2006 at 05:42:21PM -0500, Ian Lord wrote:

 If you are planning on installing precompiled 
 binairies you'll find that there is no support 
 nowhere for the amd64 version

This is completely false.

Kris

pgp90n4eT7UkV.pgp
Description: PGP signature

Re: Dual xeon


At 17:49 2006-03-27, Kris Kennaway wrote:

On Mon, Mar 27, 2006 at 05:42:21PM -0500, Ian Lord wrote:

 If you are planning on installing precompiled
 binairies you'll find that there is no support
 nowhere for the amd64 version

This is completely false.

Sorry I wasn't clear enough...

In the commercial vendors... It's really hard to find amd64 
versions... Ex: pdflib, zend performance, zend safeguard, etc



___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]

Re: 3ware 9550SX-8LP RAID help

2006-03-27 Thread Huy Ton That

After a lot of digging around and modifying the kernel a bit it's working
now.  I also had to add twa_load to the loader.conf file set to 'yes'.
Thank you for your response sir; I appreciate your time.

On 3/27/06, Erik Trulsson [EMAIL PROTECTED] wrote:

 On Mon, Mar 27, 2006 at 04:35:18PM -0500, Huy Ton That wrote:
  Hello I just purchased a new server and was installing FBSD.  It
 currently
  has 2 internal harddrives which are working and mountable.  Additionally
  there are 3 hotswappable hdds which are connected to a 3ware 9550sx-8LP
 raid
  5/0 controller card.  Everything has been configured properly within the
  controller's bios.  However, the controller is not detected during boot
  time.
 
  I found out that the 'twa' drivers should take care of this, and after
  consulting the online manpages I saw...  however it said FreeBSD 7.0below
  at the bottom of the online manpage...
 
  *HARDWARE* 
 http://www.freebsd.org/cgi/man.cgi?query=twasektion=4manpath=FreeBSD+7.0-current#end
 

 As can be seen in the link, that is the manpage for 7-CURRENT.

   The *twa* driver supports the following SATA RAID controllers:
 
   *·*   AMCC's 3ware 9500S-4LP
   *·*   AMCC's 3ware 9500S-8
   *·*   AMCC's 3ware 9500S-8MI
   *·*   AMCC's 3ware 9500S-12
   *·*   AMCC's 3ware 9500S-12MI
   *·*   AMCC's 3ware 9500SX-4LP
   *·*   AMCC's 3ware 9500SX-8LP
   *·*   AMCC's 3ware 9500SX-12
   *·*   AMCC's 3ware 9500SX-12MI
   *·*   AMCC's 3ware 9500SX-16ML
   *·*   AMCC's 3ware 9550SX-4LP
   *·*   AMCC's 3ware 9550SX-8LP
   *·*   AMCC's 3ware 9550SX-12
   *·*   AMCC's 3ware 9550SX-12MI
   *·*   AMCC's 3ware 9550SX-16ML
 
  The odd thing is that when I do man twa locally on the machine, this is
 all
  I have on my list:
 
   o   AMCC's 3ware 9500S-4LP
   o   AMCC's 3ware 9500S-8
   o   AMCC's 3ware 9500S-8MI
   o   AMCC's 3ware 9500S-12
   o   AMCC's 3ware 9500S-12MI
 
  Is this just what is supported for FreeBSD 6.0?

 Yes, that is all the devices that twa supported when 6.0 was made.
 Support for the 95x0SX cards have been added since.
 The upcoming 6.1 should support all the devices that 7-CURRENT supports.

 
  I don't know what else to do, does anyone know how to get this
 recognized?
  I've spent all morning trying to get this figured out :/.

 Try one of the 6.1 betas.  It ought to work.


 --
 Insert your favourite quote here.
 Erik Trulsson
 [EMAIL PROTECTED]

___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]

Re: Dual xeon

On Mon, Mar 27, 2006 at 05:52:04PM -0500, Ian Lord wrote:
 At 17:49 2006-03-27, Kris Kennaway wrote:
 On Mon, Mar 27, 2006 at 05:42:21PM -0500, Ian Lord wrote:
 
  If you are planning on installing precompiled
  binairies you'll find that there is no support
  nowhere for the amd64 version
 
 This is completely false.
 Sorry I wasn't clear enough...
 
 In the commercial vendors... It's really hard to find amd64 
 versions... Ex: pdflib, zend performance, zend safeguard, etc

But this is true whether or not you use ports or packages on your
FreeBSD system.

Kris


pgp3aCqwFBL4o.pgp
Description: PGP signature

Re: mysql-server50 lacks supports for innodb ???

2006-03-27 Thread Glenn Dawson


At 04:51 AM 3/27/2006, Ian Lord wrote:

At 07:47 2006-03-27, Ian Lord wrote:

At 02:47 2006-03-27, Glenn Dawson wrote:

At 10:22 PM 3/26/2006, Ian Lord wrote:

Hi,

I just installed mysql-server50 port for the ports databases directory...

I compiled it using defaults

make
make install

and InnoDB is not available...

What's wrong with the port ???


I have mysql50-server built and installed with the defaults, and 
it has support for innodb.


What did you do to determine that your install does not have support?


I really don't know... It's a clean machine, just reinstalled 
freebsd and then I did a make and make install

in the ports /usr/ports/database/mysql50-server/

Obviously, I didn't use the without_innodb flag

When I try to create a innodb table by using
create table foo (bar mediumint(8)) ENGINE=InnoDB;

If I do a
show create table foo;
+---+--+
| Table | Create Table |
+---+--+
| foo  | CREATE TABLE `foo` (
  `bar` mediumint(8) default NULL
) ENGINE=MyISAM DEFAULT CHARSET=utf8 |
+---+--+

The innodb is not there it defaults back to myisam

Anyone knows what could be wrong ?


I just did a
mysql show engine innodb status;
ERROR 1235 (42000): Cannot call SHOW INNODB STATUS because 
skip-innodb is defined


So I see the server is really skipping innodb... just strange that 
the default install does this !
I'll try to figure out what config file I need to modify so this 
doesnt happen...


What does output from:

show engine innodb status;

show?

-Glenn


Thanks for your help

___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]


___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]

Re: Cheap FreeBSD hosting?

On Mon, 27 Mar 2006 11:38:37 -0800, Tim Traver wrote:

 Not exactly sure what your needs are, but we have a shared hosting 
 system that uses FreeBSD as its back end, and we offer competitive 
 features and prices, with a really cool control panel...
 
 Our main package for domains is only $12.99/mo and you get 750MB of 
 disk, 15GB of transfer per month, and all the other features that you 
 would expect from a high end web hosting company.

Hey Tim... my needs are the reverse: lots of storage, low bandwidth. I'm
already at 2.5GB and slowly growing, but average 200-300MB/month transfer.
Unfortunately I don't see a plan on your site that fits my needs, but
thanks for the heads-up.

___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]

Clamav-milter error message

2006-03-27 Thread Gerard Seibert

For no apparent reason, when booting up I am suddenly presented with this 
message:


Starting clamav_milter.
/usr/local/sbin/clamav-milter: socket-addr (/var/run/clamav/clmilter.sock) doesn
't agree with sendmail.cf

This is the contents of that line from the sendmail.cf file:

INPUT_MAIL_FILTER(`clmilter',`S=local:/var/run/clamav/clmilter.sock, F=, 
T=S:4m;R:4m')dnl


What can be the cause of this problem?

Thanks!

--
Gerard
[EMAIL PROTECTED]
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]

Re: Video iPod and FreeBSD 6.0-SECURITY

2006-03-27 Thread Jeff Cross

Huy Ton That wrote:
This same identifical issue happened to me with my Creative Zen MicroPhoto.
Only I just did a reset by removing the battery and putting it back in.

On 3/23/06, Jeff Cross [EMAIL PROTECTED] wrote:
I recently purchased a Video iPod (30GB) and am unable to mount it as a
drive in FreeBSD. There is no device created for it when it is
inserted. All I receive is umass0: Apple iPod, rev 2.00/0.01, addr 2
but no daX device. Can anyone lend a hand on how I can mount this
device so I can use GNUpod once again?!

I also had a very scary experience happen to me when booting my laptop
in to FreeBSD with the iPod connected. I blogged about it here...

http://www.averageadmins.com/blog/2006/03/21/what-not-to-do-with-a-video-ipod-and-freebsd/

...and am anxious to know if anyone knows why my laptop failed the
volume checks when mounting the partitions. It hosed my iPod up
temporarily as well. If anyone is interested in reading that post and
commenting I would greatly appreciate it. I now know not to boot my
laptop up with the Video iPod connected!

Thanks in advance!

Jeff Cross
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to
[EMAIL PROTECTED]

___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]

Just an FYI, FreeBSD 6.1 BETA4 handles the 30GB Video iPod as expected.
I was able to mount the device an everything.

Jeff Cross
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]

Re: Mail service principles: can I have the second mailbox

2006-03-27 Thread Kelly D. Grills

On Mon, Mar 27, 2006 at 09:28:55AM +0300, User Elisej wrote:
 
 Yes, sir, I will provide any information you need.
 

I could be a maam, you never can tell ;=)

 I want to have two mailboxes with two addresses (for one account) 
 on my computer. These different mailboxes I mean to use for different sources 
 of incoming mail. So I need two real mailboxes, not two aliases 
 for one mailbox. Then I can give my different address to different senders.
 
 Although, I can make all mail going to one address and then filter incoming
 mail, I think it is a wrong way, because of superfluous action.
 

Well, there goes my plan. I'd think an alias along with a procmail recipe
to filter into separate mbox's would be a simple and effective solution.
Not sure what you mean by superfluous action.

 One mailbox I have since account creation. Its address is account name.
 The sendmail sends a mail to this address to /var/mail/account_name.
 How to make the second mailbox?
 
 I have installed FreeBSD 6.0 and Sendmail 8.13.5.
 

I run Qmail. Hopefully someone with Sendmail knowledge will chime in
and provide the assistance you need.

-- 
Kelly D. Grills
[EMAIL PROTECTED]



pgpElFgGNNqe6.pgp
Description: PGP signature

Re: User unknown?


Guillaume R. wrote:


PS:btw does anyone remember the option so that fetchmail fetch *all*
the mails (the one non-read and the other one read as well)?
Thx again
 




Monsieur Man Pages says -a . . .

Kevin Kinsey

--
I hate quotations.
-- Ralph Waldo Emerson


___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]

Re: Clamav-milter error message


Gerard Seibert wrote:

For no apparent reason, when booting up I am suddenly presented with 
this message:


Starting clamav_milter.
/usr/local/sbin/clamav-milter: socket-addr 
(/var/run/clamav/clmilter.sock) doesn

't agree with sendmail.cf

This is the contents of that line from the sendmail.cf file:

INPUT_MAIL_FILTER(`clmilter',`S=local:/var/run/clamav/clmilter.sock, 
F=, T=S:4m;R:4m')dnl


What can be the cause of this problem?

Thanks!



Wrong .cf file?

KDK

--
What good is it if you talk in flowers, and they think in pastry?
-- Ashleigh Brilliant


___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]

Re: Mail service principles: can I have the second mailbox