Rejected posting to [EMAIL PROTECTED]
You are not authorized to send mail to the MICHFUND list from your [EMAIL PROTECTED] account. You might be authorized to send to the list from another of your accounts, or perhaps when using another mail program which generates slightly different addresses, but LISTSERV has no way to associate this other account or address with yours. If you need assistance or if you have any question regarding the policy of the MICHFUND list, please contact the list owners: [EMAIL PROTECTED] Rejected message (72 lines) -- Received: from mirapointmr2.wayne.edu (IDENT:[EMAIL PROTECTED] [141.217.1.231]) by lists.wayne.edu (8.12.10+Sun/8.12.10) with ESMTP id l0J83rOo006420 for [EMAIL PROTECTED]; Fri, 19 Jan 2007 03:04:13 -0500 (EST) Received: from freebsd.org ([59.29.243.68]) by mirapointmr2.wayne.edu (MOS 3.7.5-GA) with ESMTP id DER62862; Fri, 19 Jan 2007 03:03:50 -0500 (EST) Message-Id: [EMAIL PROTECTED] From: [EMAIL PROTECTED] To: [EMAIL PROTECTED] Date: Fri, 19 Jan 2007 17:03:46 +0900 MIME-Version: 1.0 X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2600. X-MIMEOLE: Produced By Microsoft MimeOLE V6.00.2600. Content-Type: multipart/mixed; boundary=MIRAPOINT_PART1_45b07b69 X-Mirapoint-Virus: VIRUSDELETED; host=mirapointmr2.wayne.edu; attachment=[2.2]; virus=W32/MyDoom-O X-Junkmail-Status: score=10/60, host=mirapointmr2.wayne.edu X-Junkmail-SD-Raw: score=unknown, refid=str=0001.0A090203.45B0796B.00AA,ss=1,fgs=0, ip=59.29.243.68, so=2006-03-30 10:46:40, dmn=5.2.125/2006-10-10 This is a multi-part message in MIME format. --MIRAPOINT_PART1_45b07b69 Content-Type: text/plain WARNING!!! (from mirapointmr2.wayne.edu) The following message attachments were flagged by the antivirus scanner: Attachment [2.2] qperroh.zip, virus infected: W32/MyDoom-O. Action taken: deleted --MIRAPOINT_PART1_45b07b69 Content-Type: multipart/mixed; boundary==_NextPart_000_0001_07A4BF15.376DA8AA --=_NextPart_000_0001_07A4BF15.376DA8AA Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit The original message was received at Fri, 19 Jan 2007 17:03:46 +0900 from 210.242.4.75 - The following addresses had permanent fatal errors - [EMAIL PROTECTED] - Transcript of session follows - ... while talking to 177.5.70.142: DATA 400-aturner; -RMS-E-CRE, ACP file create failed 400 --=_NextPart_000_0001_07A4BF15.376DA8AA Content-Type: text/plain VIRUS WARNING Message (from mirapointmr2.wayne.edu) The virus W32/MyDoom-O was detected in email attachment [2.2] qperroh.zip. The infected attachment has been deleted. --=_NextPart_000_0001_07A4BF15.376DA8AA-- --MIRAPOINT_PART1_45b07b69-- ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: disable cntl+alt+del function
Hi, On 1/18/07, Peter Ankerstål [EMAIL PROTECTED] wrote: Sean Murphy wrote: cntl+alt+del at the console without being logged in reboots the server. The server runs through its shutdown procedure and reboots. How do I disable this function? You could compile the kernel with: options SC_DISABLE_REBOOT ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] If you don't want to rebuild your kernel, just change this sysctl knob: hw.syscons.kbd_reboot=0 You need at least 6.1-RELEASE Hope this helps. Regards. -- There's this old saying: Give a man a fish, feed him for a day. Teach a man to fish, feed him for life. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: FreeBSD challenged by Internet
I doubt there is any reasonably priced ISP that will help in troubleshooting a problem that's not reproducible on Windows. $19.95 a month for DSL (ISP charges) is not reasonably priced? WTF? Dunno about your neck of the woods, but last time I checked around here Verizon was charging something like $5 or $10 a month more for just the DSL line to connect to a third-party ISP than for the whole package using their own ISP. Makes it difficult for independents to compete, at least on price :( ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Hide ports make options/config
I am making myself an easy install sh shell script that configures my own basic setup on FreeBSD 6.2 Release. Wondering how I tell make when installing a port not to ask me make options/config (silent install). For all ports and or individual ports. Since I have my make options set in pkgtools config for sysutils/portupgrade. For example portupgrade -RN /usr/ports/lang/php4 Will ask me make options which I have already set. How do I hide the options. I tried searching a few places before asking with no luck. P.S. Thanks FreeBSD Team for another great release so far 6.2 Release is running really smooth on my P4 2.6 i386 system without any problems. By default FreeBSD 6.2 Release works with my re0 1000/baseTX Full Duplex LinkSys Gigabit NIC. Which really impresses me since I have to install a driver on windows 2003 server enterprise before the card works. Not FreeBSD!!! Thanks, Charlie ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Hide ports make options/config
On Fri, 19 Jan 2007 08:21:07 -, Charlie Hynson III [EMAIL PROTECTED] wrote: I am making myself an easy install sh shell script that configures my own basic setup on FreeBSD 6.2 Release. Wondering how I tell make when installing a port not to ask me make options/config (silent install). For all ports and or individual ports. Since I have my make options set in pkgtools config for sysutils/portupgrade. For example portupgrade -RN /usr/ports/lang/php4 Will ask me make options which I have already set. How do I hide the options. I tried searching a few places before asking with no luck. P.S. Thanks FreeBSD Team for another great release so far 6.2 Release is running really smooth on my P4 2.6 i386 system without any problems. By default FreeBSD 6.2 Release works with my re0 1000/baseTX Full Duplex LinkSys Gigabit NIC. Which really impresses me since I have to install a driver on windows 2003 server enterprise before the card works. Not FreeBSD!!! Thanks, Charlie -DBATCH For example: make install -DBATCH [OTHER SWITCHES] Hope this helps. Windows 2003 probably has the driver for your NIC, but can't find because your card is one revision higher, let's say Gigabit 123b, and windows only has a driver for Gigabit123a or something like that. Quite often (~90% of the time) this is the case on Windows 2000 and XP when it can't find a driver. One (or a few) revisions higher or lower doesn't matter for the driver. although I don't have any experience with Windows 2003, I think I can safely assume this is the case for windows 2003 to. You will have to select the driver manually. Martin ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: ssh public key authentification
Kirk Strauser wrote: The problem was not the authorized_keys file itself, it was my home directory. I don't think so. More likely, it was the .ssh directory itself. Nope. :-) The only thing I changed was /usr/home/christian from mode 770 to mode 750. Then it worked. I'm guessing it was the write-bit for the group which lead the sshd not to trust the key. Regards, Chris ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
RE: Hide ports make options/config
Ok so then in my
/usr/local/etc/pkgtools.conf
MAKE_ARGS
I put for individual ports.
MAKE_ARGS = {
'lang/php4' = '-DBATCH WITHOUT_CGI=1 WITH_APACHE=1 WITH_MAILHEAD=1
WITHOUT_FASTCGI=1 WITHOUT_PATHINFO=1 WITH_OPENSSL=1 WITH_ZLIB=1',
}
Or to affect all ports
MAKE_ARGS = {
'*' = '-DBATCH',
'lang/php4' = 'WITHOUT_CGI=1 WITH_APACHE=1 WITH_MAILHEAD=1
WITHOUT_FASTCGI=1 WITHOUT_PATHINFO=1 WITH_OPENSSL=1 WITH_ZLIB=1',
}
Will the second method work to hide the options on all ports?
Thanks very much. It should work but I'm rebuilding my world right now so I
can't test it.
LOL carpetsmoker. What a name.
Thanks,
Charlie.
-Original Message-
From: Martin Tournoij [mailto:[EMAIL PROTECTED]
Sent: Friday, January 19, 2007 4:13 AM
To: Charlie Hynson III; freebsd-questions@freebsd.org
Subject: Re: Hide ports make options/config
On Fri, 19 Jan 2007 08:21:07 -, Charlie Hynson III
[EMAIL PROTECTED] wrote:
I am making myself an easy install sh shell script that configures my own
basic setup on FreeBSD 6.2 Release. Wondering how I tell make when
installing a port not to ask me make options/config (silent install). For
all ports and or individual ports. Since I have my make options set in
pkgtools config for sysutils/portupgrade.
For example portupgrade -RN /usr/ports/lang/php4
Will ask me make options which I have already set. How do I hide the
options.
I tried searching a few places before asking with no luck.
P.S.
Thanks FreeBSD Team for another great release so far 6.2 Release is
running
really smooth on my P4 2.6 i386 system without any problems. By default
FreeBSD 6.2 Release works with my re0 1000/baseTX Full Duplex LinkSys
Gigabit NIC. Which really impresses me since I have to install a driver
on
windows 2003 server enterprise before the card works. Not FreeBSD!!!
Thanks,
Charlie
-DBATCH
For example:
make install -DBATCH [OTHER SWITCHES]
Hope this helps.
Windows 2003 probably has the driver for your NIC, but can't find because
your card is one revision higher, let's say Gigabit 123b, and windows only
has a driver for Gigabit123a or something like that.
Quite often (~90% of the time) this is the case on Windows 2000 and XP
when it can't find a driver.
One (or a few) revisions higher or lower doesn't matter for the driver.
although I don't have any experience with Windows 2003, I think I can
safely assume this is the case for windows 2003 to.
You will have to select the driver manually.
Martin
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: jboss powering down my machine?
i figured it out. i tried again after a fresh reboot and was finally able to get an error message out of it. KDE shut down completely and i got a glimse of the console window before it powered down. it had the message, processor temp 87 degrees C. preforming emergency shutdown. pull my heat sink and find it packed completely full of dust. rinsed it off and it works perfectly again. Steel City Phantom wrote: when i try to launch jboss thru eclipse on my bsd 6.2 machine, it gets about half way thru and then the machine powers down. as i understood bsd, it was not possible for that to happen. is there a log somewhere that i can look at to try to figure this out? i can't find anything very useful on my own. thanks ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Multi Boot Installtion FreeBSd+Fedora+Debian
Hello, I am sorry, actually it was working but taking too much time, and at that time I was unable to go to any tty, to avoid mishap I used knoppix qtparted and formated that partition (incomplete installation of BSD) back to fat32 file system. Now started my beastie installation , in fdisk utility I used T option giving it 165 and partitioned, I have one confusion according to http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/install-steps.html says Table 2-2. Partition Layout for First Disk Partition Filesystem Size Description a / 100 MB This is the root filesystem. Every other filesystem will be mounted somewhere under this one. 100 MB is a reasonable size for this filesystem. You will not be storing too much data on it, as a regular FreeBSD install will put about 40 MB of data here. The remaining space is for temporary data, and also leaves expansion space if future versions of FreeBSD need more space in /. b N/A 2-3 x RAM The system's swap space is kept on this partition. Choosing the right amount of swap space can be a bit of an art. A good rule of thumb is that your swap space should be two or three times as much as the available physical memory (RAM). You should also have at least 64 MB of swap, so if you have less than 32 MB of RAM in your computer then set the swap amount to 64 MB. If you have more than one disk then you can put swap space on each disk. FreeBSD will then use each disk for swap, which effectively speeds up the act of swapping. In this case, calculate the total amount of swap you need (e.g., 128 MB), and then divide this by the number of disks you have (e.g., two disks) to give the amount of swap you should put on each disk, in this example, 64 MB of swap per disk. e /var 50 MB The /var directory contains files that are constantly varying; log files, and other administrative files. Many of these files are read-from or written-to extensively during FreeBSD's day-to-day running. Putting these files on another filesystem allows FreeBSD to optimize the access of these files without affecting other files in other directories that do not have the same access pattern. f /usr Rest of disk All your other files will typically be stored in /usr and its subdirectories. when I followed 100 MB for my root / it said 118MB is minimum requirement. So I gave 120MB for / 1024MB 2x Physical Ram 300MB /var 200MB /tmp and rest is for /usr. ^target is to use X over Freebsd. Problem I facing now is: 1:My debian is showing error dropping me to fsck, running e2fsck on hdc gives can not read superblock, ^I did some mistake with partitions. Fedora is working fine, At the boot manager time I installed Freebsd boot manager I had only 1 option to boot (I will read manual if it recognizes Linux installation same as grub do). again reinstalled grub with fedora core4 (rescue mode) #chroot /mnt/sysimage #grub-install /dev/hdc added following lines in /etc/grub.conf title FreeBSD 6.1 rootnoverify (hd0,a) chainloader +1 I can boot into FreeBSD with this entry. Problem 1:it is taking some extra time same as it was taking at the installation period. (most probably due to many partitions). === New fdisk -l shows Disk /dev/hdc: 40.0 GB, 40060403712 bytes 16 heads, 63 sectors/track, 77622 cylinders Units = cylinders of 1008 * 512 = 516096 bytes Device Boot Start End Blocks Id System /dev/hdc16089 7760036041827+ f W95 Ext'd (LBA) Partition 1 does not end on cylinder boundary. /dev/hdc3 * 295436 2725632 a5 FreeBSD Partition 3 does not end on cylinder boundary. /dev/hdc5 *60896296 104359+ 83 Linux /dev/hdc66296 12384 3068383+ 83 Linux /dev/hdc7 12384 22536 5116671 83 Linux /dev/hdc8 22536 24560 1020096 83 Linux /dev/hdc9 24560 25580 514048+ 83 Linux /dev/hdc10 25580 31668 3068383+ 83 Linux /dev/hdc11 31668 33724 1036161 82 Linux swap / Solaris /dev/hdc12 33724 33931 104391 83 Linux /dev/hdc13 33932 36975 1534176 83 Linux /dev/hdc14 36976 37995 514048+ 83 Linux /dev/hdc15 37996 52212 7164958+ 83 Linux Partition table entries are not in disk order and grub shell output is: GNU GRUB version 0.95 (640K lower / 3072K upper memory) [ Minimal BASH-like line editing is supported. For the first word, TAB lists possible command completions. Anywhere else TAB lists the possible completions of a device/filename.] grub root (hd0, Possible partitions are: Partition num: 2, [BSD sub-partitions immediately follow] BSD Partition num: 'a', Filesystem type is ufs2, partition type 0xa5 BSD Partition num: 'b', Filesystem type unknown, partition type 0xa5 BSD Partition
Re: How to install the 3945ABG Driver on a fresh FreeBSD 6.2 install?
Pietro Cerutti wrote: On 1/18/07, Daniel Tourde [EMAIL PROTECTED] wrote: Hello again, Hi Daniel, I built it. It works but it complains and sometimes it shuts down itself... About the complains, see below.. What do you mean by it shuts down itself? Does the link goes down? Does the module unloads? ... That would be nice to know where to report the error messages The driver was written by Damien Bergamini damiendotbergaminiatfree.fr Just so you know, Damien no longer develops this driver, to quote from an email to the freebsd-net mailing list [http://unix.derkeiler.com/Mailing-Lists/FreeBSD/net/2006-11/msg00076.html] I just don't want to hear complaints from users if it doesn't work. I don't provide any support for the FreeBSD version of wpi(4). A shame but thats why the new driver is being developed. (hope it gets backported to 6.x) Vince Jan 18 20:24:55 guenevere kernel: rx tail flags error 702 I also see dozens of these messages on my logs, but it doesn't seem to affect the normal operation of the wireless card. Daniel ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: How to install the 3945ABG Driver on a fresh FreeBSD 6.2 install?
On 1/19/07, Vince [EMAIL PROTECTED] wrote: Just so you know, Damien no longer develops this driver, to quote from an email to the freebsd-net mailing list [http://unix.derkeiler.com/Mailing-Lists/FreeBSD/net/2006-11/msg00076.html] I just don't want to hear complaints from users if it doesn't work. I don't provide any support for the FreeBSD version of wpi(4). Uh, in that case, apologizes for my wrong information! Vince -- Pietro Cerutti ICQ: 117293691 PGP: 0x9571F78E - ASCII Ribbon Campaign - against HTML e-mail and proprietary attachments www.asciiribbon.org ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
kernel color
hi all dear in FreeBSD project. in NetBSD user can add this line to kernel to change kernel BF and FG color: options WS_DEFAULT_FG=WSCOL_XXX options WS_DEFAULT_BG=WSCOL_XXXhow can use this trit in freebsd? ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: kernel color
On Fri, 19 Jan 2007 11:20:20 -, [EMAIL PROTECTED] wrote: hi all dear in FreeBSD project. in NetBSD user can add this line to kernel to change kernel BF and FG color: options WS_DEFAULT_FG=WSCOL_XXX options WS_DEFAULT_BG=WSCOL_XXXhow can use this trit in freebsd? ___ From /usr/src/sys/conf/NOTES: # The following options will let you change the default colors of syscons. options SC_NORM_ATTR=(FG_GREEN|BG_BLACK) options SC_NORM_REV_ATTR=(FG_YELLOW|BG_GREEN) options SC_KERNEL_CONS_ATTR=(FG_RED|BG_BLACK) options SC_KERNEL_CONS_REV_ATTR=(FG_BLACK|BG_RED) Take a look at /usr/src/sys/conf/NOTES and /usr/src/sys/YOURARCH/conf/NOTES for all kernel options. Hope this help. Regards. Martin ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Mail etiquette (was: What is this mean by this term)
On Thursday January 18, 2007 at 08:33:32 (PM) Jay Chandler wrote: Murray Taylor wrote: -Original Message- From: Greg Albrecht [mailto:[EMAIL PROTECTED] Sent: Friday, 19 January 2007 11:42 AM To: Murray Taylor Cc: freebsd-questions Subject: Re: Mail etiquette (was: What is this mean by this term) On 18/01/07, Murray Taylor [EMAIL PROTECTED] wrote: Top posting is only one issue. Others of great importance are trimming your posts, not breaking the lines into tiny fragments, and not writing one-line paragraphs. Your .sig is a good example of things that people should remove from replies. Greg Exactly! And not only my .sig which I do have control over whether I add it or not, and also the [EMAIL PROTECTED] stupid corporate disclaimer also (over which I have no control) sigh mjt (no .sig) since i seem to be in the mood to muddy the waters today: have you considered using a mail address outside of your corporation? one which doesn't automatically add that disclaimer. i've never been fond of using my work email address for anything outside of work, but that's me. maybe this is an obvious answer but it is one way to please the etiquette overlords. -g -- Greg Albrecht ([EMAIL PROTECTED]) I started using the lists from work years ago when I was establishing the FreeBSD servers and it was easier to get QA stuff done... Since then the weenies have come along and changed out a perfectly servicable Postfix / Cyrus mail system with M$ Exchg(barf), and the beanies wanted the disclaimers .. Well, if they pay the bills then it is their right to do as they please. I guess you could always start your own company and enforce any regulations you desired. sigh Have any of these disclaimers ever proven to be even the slightest bit legally enforceable? I mean, for God's sake, they're at the bottom of the message, essentially telling you not to read the message you just read. I read something in a computer magazine, I am not sure which one, that clearly stated that those disclaimers are not worth the paper they are written on. -- Gerard ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Libcap Installation Question
When I am trying to install 'ngrep' in UNIX by issuing the 'make install clean' command in the ' /usr/ports/ngrep location ', I got an 'Error code 1'. It also states that there is a dependencies for pcap.2 which is not found in ' /usr/ports/net/libcap ' So, I go to '/usr/ports/net/libcap' - with the intention to issue a 'make install clean' command. However, UNIX gave me a message that there is no such file or directory. Any ideas, how I may be able to install libcap for UNIX? Thanks. Regards, Linux Quest - No need to miss a message. Get email on-the-go with Yahoo! Mail for Mobile. Get started. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Mail etiquette
Ted Mittelstaedt writes: For example, you can hold a gun to someone's head and make them sign a contract. The second you walk away they take the contract to a court and bam, it's invalidated because they signed under duress. And if you look at recent court decisions, the definition of signing under duress has been -exceedingly- stretched these days. Nowadays if someone can convince a court that the contract holder didn't completely inform them of every last little condition, they can invalidate the contract. Consent in the legal sense has two usually omitted qualifiers: fully informed and freely given. Duress negates the second; failure to provide adequate information can negate the first. That being said, it may wall be the case the working definition of adequate has expanded over time. How it changed, and why, is no doubt the subject of ongoing enquiry. Robert Huff ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Mail etiquette (was: What is this mean by this term)
On Thu, Jan 18, 2007 at 03:24:44PM -0800, Greg Albrecht wrote: On 18/01/07, Greg 'groggy' Lehey [EMAIL PROTECTED] wrote: Top-posting defined simply ... A: Because it fouls the order in which people normally read text. Q: Why is top-posting such a bad thing? A: Top-posting. Q: What is the most annoying thing on usenet and in e-mail? Unfortunately all Micro$lop 'standard' email clients and a few others put the cursor at the top of the email, so the bad habit has developed across the world both domestically and in businesses, to write there, rather than continuing the email thread at the bottom. Top posting is only one issue. Others of great importance are trimming your posts, not breaking the lines into tiny fragments, and not writing one-line paragraphs. Your .sig is a good example of things that people should remove from replies. i've been wanting to chime in on this. perhaps it should be taken into consideration that a good number of MODERN email clients support automatic threading of messages. this allows me to see each reply to a message after the original message, in succession. i understand that different people configure and use their email clients in different ways, but why is there such a pandering towards one versus the other. my email software (gmail right now but has been mutt and thunderbird in the past) makes it really easy for me to get the context of a message as soon as it arrives. perhaps it's time for the rest of the world to step up and add auto-threading to their mta's? Emails can arrive in a different order than they were sent, and people do not always keep all the emails they receive. There it is often the case that people do not have the original message to get the context from. -- Insert your favourite quote here. Erik Trulsson [EMAIL PROTECTED] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Libcap Installation Question
linux quest wrote: When I am trying to install 'ngrep' in UNIX by issuing the 'make install clean' command in the ' /usr/ports/ngrep location ', I got an 'Error code 1'. It also states that there is a dependencies for pcap.2 which is not found in ' /usr/ports/net/libcap ' Firstly. Do you have the latest ports tree? secondly are you running this as root (or via sudo) secondly, what options did you choose when you ran 'make install clean' ie. i'm guessing you choose ports pcap. Doing 'cd /usr/ports/net/ngrep make ' myself gives snip irrelevent bits--- === ngrep-1.45 depends on file: /usr/local/lib/libpcap.a - not found ===Verifying install for /usr/local/lib/libpcap.a in /usr/ports/net/libpcap = libpcap-0.9.5.tar.gz doesn't seem to exist in /usr/ports/distfiles/. = Attempting to fetch from http://www.tcpdump.org/release/. libpcap-0.9.5.tar.gz 100% of 423 kB 73 kBps ---snip me pressing ctr-c -- so you need /usr/local/lib/libpcap.a and the port for this is /usr/ports/net/libpcap I suggest you update your ports tree (cvsup or portsnap as you prefer) and try again, otherwise choose base libpcap. (copy and paste if you can cause you made a few typos in this email which could have hindered troubleshooting) Vince So, I go to '/usr/ports/net/libcap' - with the intention to issue a 'make install clean' command. However, UNIX gave me a message that there is no such file or directory. Any ideas, how I may be able to install libcap for UNIX? Thanks. Regards, Linux Quest - No need to miss a message. Get email on-the-go with Yahoo! Mail for Mobile. Get started. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: no pv entries: increase vm.pmap.shpgperproc
In response to peter [EMAIL PROTECTED]: Hi, My freebsd box runs the apache httpd2.0 server, postgresql8.1server, Recently, I got the below info in /var/crash. “Dump header from device /dev/da0s1b Architecture: i386 Architecture Version: 2 Dump Length: 1073127424B (1023 MB) Blocksize: 512 Dumptime: Wed Jan 17 16:39:08 2007 Hostname: myhost.mydomain.com Magic: FreeBSD Kernel Dump Version String: FreeBSD 6.0-RELEASE #0: Tue Apr 25 15:07:33 CST 2006 [EMAIL PROTECTED]:/usr/src/sys/i386/compile/MYKNL Panic String: no pv entries: increase vm.pmap.shpgperproc Dump Parity: 2383301964 Bounds: 49 Dump Status: good” I had searched in google, but I didn’t know how to do. You _should_ be able to raise the vm.pmap.shpgperproc sysctl to prevent the problem -- but there doesn't seem to be any such sysctl. I'm not sure what's going on here, but it seems to me that a PR is in order. Failing that, you could set the following in your kernel config: options PMAP_SHPGPERPROC=250 and rebuild/reinstall your kernel. If you're not familiar with kernel building, the docs are here: http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig.html The default value is 200, so I expect 250 will be enough of a bump to fix the problem. If it's not, raise it a little higher and try again. I don't know of any way to tell exactly what this value should be other than trial and error. I've seen warnings that raising this value too high can result in an unbootable kernel, so take care to understand how to recover from the installation of an unbootable kernel. The research I've done seems to indicate that pv exhaustion is very rare, which is why you're having trouble finding reference to it in Google searches. That's the first reference I've seen to a sysctl -- usually the recommendation is to rebuild the kernel. Google for PMAP_SHPGPERPROC and you'll find some other (albeit few) discussions. -- Bill Moran Collaborative Fusion Inc. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Flash 9
What would happen if one used the linux-alsa-libs from ports? Would that help with sound? Does not work also... the library does not recognize the sound hardware besides it crashes some minutes after starting... May be a problem with the thread library... must be reworked. Well as I said... I would bet in the gnash team... Sergio ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: the flash 9 player....
I would love to see that work, but sync'ing the audio and video may be problematical. FWIW ... John I tested the lastest version 0.7.2 it is better than the previous but is missing the ability to play movies about the sync of audio and video once the file is in the flv format, mplayer plays it very well with no problem and very low cpu consume the original mplayer from macromedia crashes because the mozilla calls NP_Shutdown and the macromedia plugin does not get initialized correctly by the mozzila (I am using epiphany)... I think that gnash is a good aproach... it forks a process and so if it crashes, does not crash the browser... Not a good solution now. Sergio ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: FreeBSD challenged by Internet
On Thu, 18 Jan 2007 23:14:33 -0800 Ted Mittelstaedt [EMAIL PROTECTED] wrote: - Original Message - From: RW [EMAIL PROTECTED] To: freebsd-questions@freebsd.org Sent: Thursday, January 18, 2007 7:43 AM Subject: Re: FreeBSD challenged by Internet On Thu, 18 Jan 2007 00:43:02 -0800 Ted Mittelstaedt [EMAIL PROTECTED] wrote: The OP said that there was no problem with linux and windows, and that's consistent with what I saw on my d-link ADSL router. Presumably FreeBSD is doing something slightly different. Yes, it is, it's making IPv6 DNS queries. In my case, compiling-out IPv6 support from the kernel was the first thing I tried, and it didn't make much difference. The DNS proxy worked properly with Windows, but not FreeBSD. These problems is particularly acute in countries where PPPoA is the norm. And the other thing is that just about all the DSL setups I've seen in bridging mode do the PPPoE/PPPoA conversion automagically. There's a history of PPPoE in the US, so people expect to have it, even over ATM. In the UK BT turned-on PPPoEoA a few years ago, but didn't really tell anyone, BT resellers generally don't provide much support for it. LLU operators haven't bothered, because there's no real demand. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: ssh public key authentification
On Thu, Jan 18, 2007 at 05:00:56PM -0600, Kirk Strauser wrote: On Thursday 18 January 2007 16:44, Christian Baer wrote: The problem was not the authorized_keys file itself, it was my home directory. I don't think so. More likely, it was the .ssh directory itself. Why not? Group write is plenty enough for someone else to replace the .ssh directory with another one, so sshd checks for that. Ceri -- That must be wonderful! I don't understand it at all. -- Moliere pgppxF88au6W8.pgp Description: PGP signature
Re: What is this mean by this term
On Thu, Jan 18, 2007 at 04:31:41PM +1100, Murray Taylor wrote: Unfortunately all Micro$lop 'standard' email clients and a few others put the cursor at the top of the email, Actually, Entourage does not. While we're on the subject of etiquette, those insist on having this much crap at the bottom of their mails, might like to include a sig delimiter: --- The information transmitted in this e-mail is for the exclusive use of the intended addressee and may contain confidential and/or privileged material. Any review, re-transmission, dissemination or other use of it, or the taking of any action in reliance upon this information by persons and/or entities other than the intended recipient is prohibited. If you received this in error, please inform the sender and/or addressee immediately and delete the material. E-mails may not be secure, may contain computer viruses and may be corrupted in transmission. Please carefully check this e-mail (and any attachment) accordingly. No warranties are given and no liability is accepted for any loss or damage caused by such matters. --- ### This e-mail message has been scanned for Viruses by Bytecraft ### ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] Ceri -- That must be wonderful! I don't understand it at all. -- Moliere pgpZWW6EOFbpu.pgp Description: PGP signature
Re: Mail etiquette (was: What is this mean by this term)
On Fri, Jan 19, 2007 at 09:42:54AM +1030, Greg 'groggy' Lehey wrote: I think the biggest problem with Microsoft MUAs is not where they position the cursor, but the difficulty they cause in editing the text. My editor also positions the cursor at the very top when I reply to a message. But it also makes it possible to tidy things up. To be fair to Microsoft (or perhaps this makes it even worse), their Mac development team clearly understand this, as Entourage (the Mac equivalent of Outlook) doesn't do any of the tens of stupid things that Outlook does. Top posting is only one issue. Others of great importance are trimming your posts, not breaking the lines into tiny fragments, and not writing one-line paragraphs. Your .sig is a good example of things that people should remove from replies. When they are correctly formatted (line-feed,hyphen,hyphen,space), good MUAs can do this automatically. Ceri -- That must be wonderful! I don't understand it at all. -- Moliere pgpkqYP0AYgtW.pgp Description: PGP signature
Re: Mail etiquette (was: What is this mean by this term)
On Fri, Jan 19, 2007 at 11:32:38AM +1100, Murray Taylor wrote: Exactly! And not only my .sig which I do have control over whether I add it or not, and also the [EMAIL PROTECTED] stupid corporate disclaimer also (over which I have no control) sigh Though you could presumably add an empty .sig which would prevent others from having to delete the rubbish every time they wanted to reply to you :) Ceri -- That must be wonderful! I don't understand it at all. -- Moliere pgp4p88nr0FyI.pgp Description: PGP signature
Re: ssh public key authentification
On Friday 19 January 2007 9:10 am, Ceri Davies wrote: Why not? Group write is plenty enough for someone else to replace the .ssh directory with another one, so sshd checks for that. To replace it with another 700 directory owned by the user, containing a 400 file also owned by the user? -- Kirk Strauser pgpCCD0vRRwLq.pgp Description: PGP signature
Re: Kernel Compiling Problem
Xu-Long Wang [EMAIL PROTECTED] writes: Some problem in my kernal file and it suggests that: one code error devicesbp # SCSI over FireWire (Requires scbus and da) Note the comment: Requires scbus and da ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: no pv entries: increase vm.pmap.shpgperproc
In response to Bill Moran [EMAIL PROTECTED]: In response to peter [EMAIL PROTECTED]: Hi, My freebsd box runs the apache httpd2.0 server, postgresql8.1server, Recently, I got the below info in /var/crash. “Dump header from device /dev/da0s1b Architecture: i386 Architecture Version: 2 Dump Length: 1073127424B (1023 MB) Blocksize: 512 Dumptime: Wed Jan 17 16:39:08 2007 Hostname: myhost.mydomain.com Magic: FreeBSD Kernel Dump Version String: FreeBSD 6.0-RELEASE #0: Tue Apr 25 15:07:33 CST 2006 [EMAIL PROTECTED]:/usr/src/sys/i386/compile/MYKNL Panic String: no pv entries: increase vm.pmap.shpgperproc Dump Parity: 2383301964 Bounds: 49 Dump Status: good” I had searched in google, but I didn’t know how to do. You _should_ be able to raise the vm.pmap.shpgperproc sysctl to prevent the problem -- but there doesn't seem to be any such sysctl. I'm not sure what's going on here, but it seems to me that a PR is in order. http://www.freebsd.org/cgi/query-pr.cgi?pr=108121 -- Bill Moran Collaborative Fusion Inc. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: How to install the 3945ABG Driver on a fresh FreeBSD 6.2 install?
On 1/18/07, Pietro Cerutti [EMAIL PROTECTED] wrote: On 1/18/07, Daniel Tourde [EMAIL PROTECTED] wrote: Hello Pietro, Again... PS: There are many drivers around on the net. That would be nice to indicate where you found that one, coz it seems to work... ;) Figured out, I took it from here: http://people.freebsd.org/~flz/local/wpi/wpi-freebsd-20061109.tgz -- Pietro Cerutti ICQ: 117293691 PGP: 0x9571F78E And does it work for RELENG_6 now? or for HEAD? -- Regards, -Abdullah Ibn Hamad Al-Marri Arab Portal http://www.WeArab.Net/ ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Mail etiquette (was: What is this mean by this term)
On Friday January 19, 2007 at 10:21:24 (AM) Ceri Davies wrote: On Fri, Jan 19, 2007 at 09:42:54AM +1030, Greg 'groggy' Lehey wrote: I think the biggest problem with Microsoft MUAs is not where they position the cursor, but the difficulty they cause in editing the text. My editor also positions the cursor at the very top when I reply to a message. But it also makes it possible to tidy things up. To be fair to Microsoft (or perhaps this makes it even worse), their Mac development team clearly understand this, as Entourage (the Mac equivalent of Outlook) doesn't do any of the tens of stupid things that Outlook does. Actually, the MS Live Beta version can be configured to place the cursor at the end when replying. Top posting is only one issue. Others of great importance are trimming your posts, not breaking the lines into tiny fragments, and not writing one-line paragraphs. Your .sig is a good example of things that people should remove from replies. No one needs a 10+ line signature. Perhaps they are compromising for other shortcomings. When they are correctly formatted (line-feed,hyphen,hyphen,space), good MUAs can do this automatically. I think the problem can be more readily attributed to the theory of PEBKC. -- Gerard ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Mail etiquette (was: What is this mean by this term)
Gerard Seibert wrote: On Friday January 19, 2007 at 10:21:24 (AM) Ceri Davies wrote: On Fri, Jan 19, 2007 at 09:42:54AM +1030, Greg 'groggy' Lehey wrote: I think the biggest problem with Microsoft MUAs is not where they position the cursor, but the difficulty they cause in editing the text. My editor also positions the cursor at the very top when I reply to a message. But it also makes it possible to tidy things up. To be fair to Microsoft (or perhaps this makes it even worse), their Mac development team clearly understand this, as Entourage (the Mac equivalent of Outlook) doesn't do any of the tens of stupid things that Outlook does. Actually, the MS Live Beta version can be configured to place the cursor at the end when replying. Top posting is only one issue. Others of great importance are trimming your posts, not breaking the lines into tiny fragments, and not writing one-line paragraphs. Your .sig is a good example of things that people should remove from replies. No one needs a 10+ line signature. Perhaps they are compromising for other shortcomings. When they are correctly formatted (line-feed,hyphen,hyphen,space), good MUAs can do this automatically. I think the problem can be more readily attributed to the theory of PEBKC. There are also patches for Outlook to implement proper quoting and replying. Ta, Joe ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
How to get best results from FreeBSD-questions
How to get the best results from FreeBSD questions. === Last update $Date: 2005/08/10 02:21:44 $ This is a regular posting to the FreeBSD questions mailing list. If you got it in answer to a message you sent, it means that the sender thinks that at least one of the following things was wrong with your message: - You left out a subject line, or the subject line was not appropriate. - You formatted it in such a way that it was difficult to read. - You asked more than one unrelated question in one message. - You sent out a message with an incorrect date, time or time zone. - You sent out the same message more than once. - You sent an 'unsubscribe' message to FreeBSD-questions. If you have done any of these things, there is a good chance that you will get more than one copy of this message from different people. Read on, and your next message will be more successful. This document is also available on the web at http://www.lemis.com/questions.html. = Contents: I:Introduction II: How to unsubscribe from FreeBSD-questions III: Should I ask -questions or -hackers? IV: How to submit a question to FreeBSD-questions V:How to answer a question to FreeBSD-questions I: Introduction === This is a regular posting aimed to help both those seeking advice from FreeBSD-questions (the newcomers), and also those who answer the questions (the hackers). Note that the term hacker has nothing to do with breaking into other people's computers. The correct term for the latter activity is cracker, but the popular press hasn't found out yet. The FreeBSD hackers disapprove strongly of cracking security, and have nothing to do with it. In the past, there has been some friction which stems from the different viewpoints of the two groups. The newcomers accused the hackers of being arrogant, stuck-up, and unhelpful, while the hackers accused the newcomers of being stupid, unable to read plain English, and expecting everything to be handed to them on a silver platter. Of course, there's an element of truth in both these claims, but for the most part these viewpoints come from a sense of frustration. In this document, I'd like to do something to relieve this frustration and help everybody get better results from FreeBSD-questions. In the following section, I recommend how to submit a question; after that, we'll look at how to answer one. II: How to unsubscribe from FreeBSD-questions == When you subscribed to FreeBSD-questions, you got a welcome message from [EMAIL PROTECTED] In this message, amongst other things, it told you how to unsubscribe. Here's a typical message: Welcome to the freebsd-questions@freebsd.org mailing list! If you ever want to unsubscribe or change your options (eg, switch to or from digest mode, change your password, etc.), visit your subscription page at: http://lists.freebsd.org/mailman/options/freebsd-questions/[EMAIL PROTECTED] (obviously, substitute your mail address for [EMAIL PROTECTED]). You can also make such adjustments via email by sending a message to: [EMAIL PROTECTED] with the word 'help' in the subject or body (don't include the quotes), and you will get back a message with instructions. You must know your password to change your options (including changing the password, itself) or to unsubscribe. Normally, Mailman will remind you of your freebsd.org mailing list passwords once every month, although you can disable this if you prefer. This reminder will also include instructions on how to unsubscribe or change your account options. There is also a button on your options page that will email your current password to you. Here's the general information for the list you've subscribed to, in case you don't already have it: FREEBSD-QUESTIONS User questions This is the mailing list for questions about FreeBSD. You should not send how to questions to the technical lists unless you consider the question to be pretty technical. Normally, unsubscribing is even simpler than the message suggests: you don't need to specify your mail ID unless it is different from the one which you specified when you subscribed. If Majordomo replies and tells you (incorrectly) that you're not on the list, this may mean one of two things: 1. You have changed your mail ID since you subscribed. That's where keeping the original message from majordomo comes in handy. For example, the sample message above shows my mail ID as [EMAIL PROTECTED] Since then, I have changed it to [EMAIL PROTECTED] If I were to try to remove [EMAIL PROTECTED] from the list, it would fail: I would have to specify the name with which I joined. 2. You're subscribed to a mailing list which is subscribed to
The Complete FreeBSD: errata and addenda
The trouble with books is that you can't update them the way you can a web page or any other online documentation. The result is that most leading edge computer books are out of date almost before they are printed. Unfortunately, The Complete FreeBSD, published by O'Reilly, is no exception. Inevitably, a number of bugs and changes have surfaced. The Complete FreeBSD has been through a total of five editions, including its predecessor Installing and Running FreeBSD. Two of these have been reprinted with corrections. I maintain a series of errata pages. Start at http://www.lemis.com/errata-4.html to find out how to get the errata information. Note also that the book has now been released for free download in PDF form. Instead of downloading the changed pages, you may prefer to download the entire book. See http://www.lemis.com/grog/Documentation/CFBSD/ for more information. Have you found a problem with the book, or maybe something confusing? Please let me know: I'm no longer constantly updating it, but I may be able to help Greg ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
php5-session port seems borked
Hi, I was getting the error Fatal error: Call to undefined function session_name() in So, I thought i'd try recompiling session support for php, here is a transcript of how that went :) secure1# make === Building for php5-session-5.2.0 /bin/sh /usr/ports/www/php5-session/work/php-5.2.0/ext/session/libtool --mode=compile cc -I. -I/usr/ports/www/php5-session/work/php-5.2.0/ext/session -DPHP_ATOM_INC -I/usr/ports/www/php5-session/work/php-5.2.0/ext/session/include -I/usr/ports/www/php5-session/work/php-5.2.0/ext/session/main -I/usr/ports/www/php5-session/work/php-5.2.0/ext/session -I/usr/local/include/php -I/usr/local/include/php/main -I/usr/local/include/php/TSRM -I/usr/local/include/php/Zend -I/usr/local/include/php/ext -DHAVE_CONFIG_H -O -pipe -mcpu=pentiumpro -c /usr/ports/www/php5-session/work/php-5.2.0/ext/session/session.c -o session.lo cc -I. -I/usr/ports/www/php5-session/work/php-5.2.0/ext/session -DPHP_ATOM_INC -I/usr/ports/www/php5-session/work/php-5.2.0/ext/session/include -I/usr/ports/www/php5-session/work/php-5.2.0/ext/session/main -I/usr/ports/www/php5-session/work/php-5.2.0/ext/session -I/usr/local/include/php -I/usr/local/include/php/main -I/usr/local/include/php/TSRM -I/usr/local/include/php/Zend -I/usr/local/include/php/ext -DHAVE_CONFIG_H -O -pipe -mcpu=pentiumpro -c /usr/ports/www/php5-session/work/php-5.2.0/ext/session/session.c -fPIC -DPIC -o .libs/session.o /usr/ports/www/php5-session/work/php-5.2.0/ext/session/session.c:85: warning: parameter names (without types) in function declaration /usr/ports/www/php5-session/work/php-5.2.0/ext/session/session.c: In function `OnUpdateSaveDir': /usr/ports/www/php5-session/work/php-5.2.0/ext/session/session.c:156: warning: assignment makes pointer from integer without a cast /usr/ports/www/php5-session/work/php-5.2.0/ext/session/session.c: At top level: /usr/ports/www/php5-session/work/php-5.2.0/ext/session/session.c:285: error: `ps' undeclared here (not in a function) /usr/ports/www/php5-session/work/php-5.2.0/ext/session/session.c:285: error: initializer element is not constant /usr/ports/www/php5-session/work/php-5.2.0/ext/session/session.c:285: error: (near initialization for `session_module_entry.post_deactivate_func') /usr/ports/www/php5-session/work/php-5.2.0/ext/session/session.c:286: error: `ps' undeclared here (not in a function) /usr/ports/www/php5-session/work/php-5.2.0/ext/session/session.c:286: error: initializer element is not constant /usr/ports/www/php5-session/work/php-5.2.0/ext/session/session.c:286: error: (near initialization for `session_module_entry.globals_id') /usr/ports/www/php5-session/work/php-5.2.0/ext/session/session.c:289: warning: excess elements in struct initializer /usr/ports/www/php5-session/work/php-5.2.0/ext/session/session.c:289: warning: (near initialization for `session_module_entry') /usr/ports/www/php5-session/work/php-5.2.0/ext/session/session.c:289: warning: excess elements in struct initializer /usr/ports/www/php5-session/work/php-5.2.0/ext/session/session.c:289: warning: (near initialization for `session_module_entry') /usr/ports/www/php5-session/work/php-5.2.0/ext/session/session.c:290: warning: excess elements in struct initializer /usr/ports/www/php5-session/work/php-5.2.0/ext/session/session.c:290: warning: (near initialization for `session_module_entry') /usr/ports/www/php5-session/work/php-5.2.0/ext/session/session.c: In function `PHP_GINIT_FUNCTION': /usr/ports/www/php5-session/work/php-5.2.0/ext/session/session.c:1892: error: invalid type argument of `-' /usr/ports/www/php5-session/work/php-5.2.0/ext/session/session.c:1893: error: invalid type argument of `-' /usr/ports/www/php5-session/work/php-5.2.0/ext/session/session.c:1894: error: invalid type argument of `-' /usr/ports/www/php5-session/work/php-5.2.0/ext/session/session.c:1895: error: invalid type argument of `-' /usr/ports/www/php5-session/work/php-5.2.0/ext/session/session.c:1896: error: invalid type argument of `-' /usr/ports/www/php5-session/work/php-5.2.0/ext/session/session.c:1897: error: invalid type argument of `-' /usr/ports/www/php5-session/work/php-5.2.0/ext/session/session.c:1898: error: invalid type argument of `-' *** Error code 1 Stop in /usr/ports/www/php5-session/work/php-5.2.0/ext/session. *** Error code 1 Stop in /usr/ports/www/php5-session. Let me know if I need to provide more information on this. Jeff. -- Unless otherwise indicated, anything I write is either garnered from experience or pulled out of my ass, depending on situational needs.. Jeff MacDonald ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: How to install the 3945ABG Driver on a fresh FreeBSD 6.2 install?
On 1/19/07, Abdullah Al-Marrie [EMAIL PROTECTED] wrote: On 1/18/07, Pietro Cerutti [EMAIL PROTECTED] wrote: On 1/18/07, Daniel Tourde [EMAIL PROTECTED] wrote: Hello Pietro, Again... PS: There are many drivers around on the net. That would be nice to indicate where you found that one, coz it seems to work... ;) Figured out, I took it from here: http://people.freebsd.org/~flz/local/wpi/wpi-freebsd-20061109.tgz -- Pietro Cerutti ICQ: 117293691 PGP: 0x9571F78E And does it work for RELENG_6 now? or for HEAD? It works for 6.2-STABLE, and for 6.2-RELEASE too, since I used it on 6.2.-PRERELEASE too.. -- Regards, -Abdullah Ibn Hamad Al-Marri Arab Portal http://www.WeArab.Net/ -- Pietro Cerutti ICQ: 117293691 PGP: 0x9571F78E - ASCII Ribbon Campaign - against HTML e-mail and proprietary attachments www.asciiribbon.org ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
buildworld fails, 6.1 to 6.2
buildworld fails with this msg c++ -fpic -DPIC -O2 -fno-strict-aliasing -pipe -DIN_GLIBCPP_V3 -DHAVE_CONFIG_H -I/usr/src/gnu/lib/libstdc++ -I/usr/src/gnu/lib/libstdc++/../../../contrib/libstdc++/libsupc++ -I/usr/src/gnu/lib/libstdc++/../../../contrib/gcc -I/usr/src/gnu/lib/libstdc++/../../../contrib/libstdc++/include -frandom-seed=RepeatabilityConsideredGood -fno-implicit-templates -ffunction-sections -fdata-sections -Wno-deprecated -c /usr/src/gnu/lib/libstdc++/../../../contrib/libstdc++/src/locale-inst.cc -o locale-inst.So /usr/src/gnu/lib/libstdc++/../../../contrib/libstdc++/include/bits/locale_facets.h: In member function `_InIter std::money_get_CharT, _InIter::get(_InIter, _InIter, bool, std::ios_base, std::_Ios_Iostate, long double) const [with _CharT = char, _InIter = std::istreambuf_iteratorchar, std::char_traitschar ]': /usr/src/gnu/lib/libstdc++/../../../contrib/libstdc++/include/bits/locale_facets.h:4016: internal compiler error: Segmentation fault: 11 Please submit a full bug report, with preprocessed source if appropriate. See URL:http://gcc.gnu.org/bugs.html for instructions. *** Error code 1 Stop in /usr/src/gnu/lib/libstdc++. *** Error code 1 Stop in /usr/src/gnu/lib. *** Error code 1 motown# uname -a FreeBSD motown.xx.com 6.1-RELEASE FreeBSD 6.1-RELEASE #0: Sat Dec 30 22:22:17 CST 2006 [EMAIL PROTECTED]:/usr/src/sys/i386/compile/MOTOWN i386 I've cleaned out /usr/obj as the handbook states and rerun cvsup but still unable to complete a buildworld. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: buildworld fails, 6.1 to 6.2
El viernes 19 de enero a las 18:42:34 CET, Mark Busby escribió: /usr/src/gnu/lib/libstdc++/../../../contrib/libstdc++/include/bits/locale_facets.h: In member function `_InIter std::money_get_CharT, _InIter::get(_InIter, _InIter, bool, std::ios_base, std::_Ios_Iostate, long double) const [with _CharT = char, _InIter = std::istreambuf_iteratorchar, std::char_traitschar ]': /usr/src/gnu/lib/libstdc++/../../../contrib/libstdc++/include/bits/locale_facets.h:4016: internal compiler error: Segmentation fault: 11 Check your memory slots with with memtest: http://www.bitwizard.nl/sig11/ -- http://personales.ya.com/banach pgp3eHxbhoTt9.pgp Description: PGP signature
Default config file for 6.1-Stable Kernel
Is the config file in the ISO for 6.1-stable correct and accurate how the generic kernal that is on the dist is built? It doesn't seem to be setup right to me, so before I build a kernel with just a few minor changes I figured I'd ask. If it doesn't have the right settings, does anyone have the build file for the 6.1-stable generic kernel? Thanks! ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Does Firefox run on the SPARC64 port of FreeBSD?
On 1/18/07, Christian Baer [EMAIL PROTECTED] wrote: Michael Johnson wrote: Firefox only runs on = 601101 sparc64. I am guessing that means a special revision of the UltraSPARC II processor, but I don't really know, because google gets a lot of hits, mainly explaining all sorts of soft that seems to have the same problem, but none of these hits really explain the meaning behind this. So even though this is getting a little OT: In English, please! I upgraded my sparc64 box today (7-CURRENT) and I do see Firefox segfaulting when starting now, I'm not sure what has changed in Firefox or FreeBSD yet, but I'll be looking for a fix in the coming days. Regards Chris ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
How to catch a memory leak?
Dear Mailing List,
The application vlc (found in ports) when run on FBSD 5.x and 6.x
behaves as if there's a memory leak somewhere hidden in it. This is
appearing when starting vlc from shell playing a playlist and streaming
video over udp to LAN like so:
vlc --loop playlist.m3u --sout
'#transcode{acodec=mpga,ab=192}:std{access=udp,mux=,dst=239.255.255.255}'
The memory of the machine slowly gets eaten until the application ends
with the message 'Killed' when the memory has run out.
I have adressed this on the vlc forum and I have begun glancing on the
massive source code of this very complex application.
Kris Kennaway has pointed out that it is most likely an issue with threads.
My question is how do I track down a possible memory leak and would
there be a tool to monitor (from outside the application) what process
that allocates memory and how much?
Running it through gdb breaks it and attaching gdp to it while running
breaks it.
Grateful for any pointers to get me in the right direction. Thanks In
Advance.
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Flash 9
i tested 9,but seems it isn't stable enough ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: How to catch a memory leak?
On Jan 19, 2007, at 12:00 PM, Roger Olofsson wrote: The application vlc (found in ports) when run on FBSD 5.x and 6.x behaves as if there's a memory leak somewhere hidden in it. [ ... ] My question is how do I track down a possible memory leak and would there be a tool to monitor (from outside the application) what process that allocates memory and how much? Consider something like the valgrind port or dlmalloc. -- -Chuck ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Default config file for 6.1-Stable Kernel
On Friday 19 January 2007 19:37, Don O'Neil wrote: Is the config file in the ISO for 6.1-stable correct and accurate how the generic kernal that is on the dist is built? You're speaking of the 6.1-RELEASE ISO I presume. Yes, the kernel that comes with the CD is GENERIC. It doesn't seem to be setup right to me, so before I build a kernel with just a few minor changes I figured I'd ask. If it doesn't have the right settings, does anyone have the build file for the 6.1-stable generic kernel? You can find it in /usr/src/sys/your architecture/conf/GENERIC. Thanks! You're welcome. Regards, Pieter de Goeje ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: php5-session port seems borked
On Friday 19 January 2007 18:13, Jeff MacDonald wrote: Hi, I was getting the error Fatal error: Call to undefined function session_name() in So, I thought i'd try recompiling session support for php, here is a transcript of how that went :) secure1# make === Building for php5-session-5.2.0 /bin/sh /usr/ports/www/php5-session/work/php-5.2.0/ext/session/libtool --mode=compile cc -I. -I/usr/ports/www/php5-session/work/php-5.2.0/ext/session -DPHP_ATOM_INC -I/usr/ports/www/php5-session/work/php-5.2.0/ext/session/include -I/usr/ports/www/php5-session/work/php-5.2.0/ext/session/main -I/usr/ports/www/php5-session/work/php-5.2.0/ext/session -I/usr/local/include/php -I/usr/local/include/php/main -I/usr/local/include/php/TSRM -I/usr/local/include/php/Zend -I/usr/local/include/php/ext -DHAVE_CONFIG_H -O -pipe snip My output differs significantly from your output, I guess you have removed the first 100 lines of output here; if not you should probably do a 'make clean' before 'make'. If that is not the case then I would try recompiling all php related ports. - Pieter ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Hide ports make options/config
On Fri, 19 Jan 2007 03:21:07 -0500 Charlie Hynson III [EMAIL PROTECTED] wrote: I am making myself an easy install sh shell script that configures my own basic setup on FreeBSD 6.2 Release. Wondering how I tell make when installing a port not to ask me make options/config (silent install). For all ports and or individual ports. Since I have my make options set in pkgtools config for sysutils/portupgrade. Unless the behaviour of portupgrade has changed recently, this is a bad idea. The options in pkgtools.conf only apply to ports that portupgrade builds directly. During an initial installation most of the ports get built as missing dependencies, so miss the options set in pkgtools.conf. A better way is to set the options in make.conf either directly or by using sysutils/portconf. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Mail etiquette
Greg 'groggy' Lehey wrote: Top posting is only one issue. Others of great importance are trimming your posts, not breaking the lines into tiny fragments, and not writing one-line paragraphs. Your .sig is a good example of things that people should remove from replies. Hmmm. While I can agree with the other points, I don't see much wrong with one-line paragraphs. I can think of several situations where one-line paragraphs are perfectly okay. You may have some special cases in mind. -- Tore ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
gsfonts in X ?
Hello everyone ! My problem is that fonts look really horrible in most websites (see screenshot at the end of this message). The same problem occured in various Linux distros and was solved by installing the gsfonts-x11 package. How would I do the same in FBSD ? The print/gsfonts port is installed but I guess I need to do something else. Any ideas ? Firas P.S. : screenshot available here : http://fkraiem.free.fr/gsfonts.png ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Mail etiquette
In response to Tore Lund [EMAIL PROTECTED]: Greg 'groggy' Lehey wrote: Top posting is only one issue. Others of great importance are trimming your posts, not breaking the lines into tiny fragments, and not writing one-line paragraphs. Your .sig is a good example of things that people should remove from replies. Hmmm. While I can agree with the other points, I don't see much wrong with one-line paragraphs. I can think of several situations where one-line paragraphs are perfectly okay. You may have some special cases in mind. I think there's a miscommunication here. I'm fairly certain that Greg is specifically referring to paragraphs that are one _long_ line ... as in scrolling off the right side of the screen, out the window and down the street. If you're referring to short paragraphs, like this one, you're OK (IMHO). -- Bill Moran Collaborative Fusion Inc. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
startup script with non-root user
Hello, I have an application I'd like to startup at boot, however, the script needs to be started by a non-user account. If I put the startup script in /usr/local/etc/rc.d/hobbit.sh How do I get it to start using the user account 'hobbit' Thanks ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Problems with custom kernel fbsd 6.2
Hello, My kernel for freebsd 6.2 is not compiling but only with my custom config. I was able to compile it with the GENERIC kernel included, but my modified one will not compile. All I see at the end of my compilation is: awk -f /usr/home/ncvs/src/sys/modules/zlib/../../conf/kmod_syms.awk zlib.kld export_syms | xargs -J% objcopy % zlib.kld ld -Bshareable -d -warn-common -o zlib.ko.debug zlib.kld objcopy --strip-debug zlib.ko.debug zlib.ko 1 error *** Error code 2 1 error *** Error code 2 1 error It compiles ok with the generic kernel, but for whatever reason, my custom one will not compile. My process was that I cvsupped the src files(for fbsd 6.2 upgrade, from 6.1 p5), then cleaned out the /usr/obj stuff, then went back to my cvsup src directory and did a make buildworld, then I copied the GENERIC kernel file in sys/i386/conf to MAINSERVER, edited the ident option of the kernel config to reflect the name, copied MAINSERVER to /root/kernels then deleted the one in the conf directory and recreated it as a symlink to the one in the kernels directory.(lrwxr-xr-x 1 root wheel 24 Jan 18 19:42 MAINSERVER - /root/kernels/MAINSERVER ls from conf directory.) Then, I went back to the top level of src, and did a make -j4 buildkernel KERNCONF=MAINSERVER I did manage to get the generic config working as is reflected by my uname: FreeBSD 6.2-RELEASE FreeBSD 6.2-RELEASE #0: Fri Jan 19 01:48:20 CST 2007 james@:/usr/obj/usr/home/ncvs/src/sys/GENERIC i386 Included is my hardware information from dmsg and my kernel config. If you see something in my kernel config that doesn't look right, please let me know. Thanks very much. James Hein# # GENERIC -- Generic kernel configuration file for FreeBSD/i386 # # For more information on this file, please read the handbook section on # Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD: src/sys/i386/conf/GENERIC,v 1.429.2.13 2006/10/09 18:41:36 simon Exp $ machine i386 cpu I686_CPU ident MAINSERVER # To statically compile in device wiring instead of /boot/device.hints #hints GENERIC.hints # Default places to look for devices. makeoptions DEBUG=-g# Build kernel with gdb(1) debug symbols options SCHED_4BSD # 4BSD scheduler options PREEMPTION # Enable kernel thread preemption options INET# InterNETworking #options INET6 # IPv6 communications protocols options FFS # Berkeley Fast Filesystem options SOFTUPDATES # Enable FFS soft updates support options UFS_ACL # Support for access control lists options UFS_DIRHASH # Improve performance on big directories options MD_ROOT # MD is a potential root device #options NFSCLIENT # Network Filesystem Client #options NFSSERVER # Network Filesystem Server #options NFS_ROOT# NFS usable as /, requires NFSCLIENT #optionsPROCFS # Process filesystem (requires PSEUDOFS) options PSEUDOFS# Pseudo-filesystem framework options GEOM_GPT# GUID Partition Tables. options COMPAT_43 # Compatible with BSD 4.3 [KEEP THIS!] options COMPAT_FREEBSD4 # Compatible with FreeBSD4 options COMPAT_FREEBSD5 # Compatible with FreeBSD5 #optionsSCSI_DELAY=5000 # Delay (in ms) before probing SCSI options KTRACE # ktrace(1) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions options KBD_INSTALL_CDEV# install a CDEV entry in /dev #optionsADAPTIVE_GIANT # Giant mutex is adaptive. device apic# I/O APIC # Bus support. device eisa device pci # Floppy drives device fdc # ATA and ATAPI devices device ata device atadisk # ATA disk drives #device ataraid # ATA RAID drives device atapicd # ATAPI CDROM drives #device
Re: Problems with custom kernel fbsd 6.2
On Friday 19 January 2007 23:18, James Hein wrote: Hello, My kernel for freebsd 6.2 is not compiling but only with my custom config. I was able to compile it with the GENERIC kernel included, but my modified one will not compile. All I see at the end of my compilation is: awk -f /usr/home/ncvs/src/sys/modules/zlib/../../conf/kmod_syms.awk zlib.kld export_syms | xargs -J% objcopy % zlib.kld ld -Bshareable -d -warn-common -o zlib.ko.debug zlib.kld objcopy --strip-debug zlib.ko.debug zlib.ko 1 error *** Error code 2 1 error *** Error code 2 1 error It compiles ok with the generic kernel, but for whatever reason, my custom one will not compile. My process was that I cvsupped the src files(for fbsd 6.2 upgrade, from 6.1 p5), then cleaned out the /usr/obj stuff, then went back to my cvsup src directory and did a make buildworld, then I copied the GENERIC kernel file in sys/i386/conf to MAINSERVER, edited the ident option of the kernel config to reflect the name, copied MAINSERVER to /root/kernels then deleted the one in the conf directory and recreated it as a symlink to the one in the kernels directory.(lrwxr-xr-x 1 root wheel 24 Jan 18 19:42 MAINSERVER - /root/kernels/MAINSERVER ls from conf directory.) Then, I went back to the top level of src, and did a make -j4 buildkernel KERNCONF=MAINSERVER I did manage to get the generic config working as is reflected by my uname: FreeBSD 6.2-RELEASE FreeBSD 6.2-RELEASE #0: Fri Jan 19 01:48:20 CST 2007 james@:/usr/obj/usr/home/ncvs/src/sys/GENERIC i386 Included is my hardware information from dmsg and my kernel config. If you see something in my kernel config that doesn't look right, please let me know. Thanks very much. James Hein Since you disabled inet6, you should also disable the ipv6 to ipv4 tunneling (device gif). Hope that helps. Firas ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: startup script with non-root user
according to rc.subr(8):
${name}_user
User to run command as, using chroot(8). if
${name}_chroot is set, otherwise uses su(1). Only
supported after /usr is mounted.
so in your /etc/rc.conf you could put:
hobbit_enable=YES
hobbit_user=hobbit
-g
On 19/01/07, Don Munyak [EMAIL PROTECTED] wrote:
Hello,
I have an application I'd like to startup at boot, however, the script
needs to be started by a non-user account.
If I put the startup script in /usr/local/etc/rc.d/hobbit.sh
How do I get it to start using the user account 'hobbit'
Thanks
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
--
Greg Albrecht ([EMAIL PROTECTED])
An Indie, Hip Hop and IDM Podcast: The Letter G
http://theletterg.org
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: startup script with non-root user
On Fri, Jan 19, 2007 at 05:30:00PM -0500, Don Munyak wrote: Hello, I have an application I'd like to startup at boot, however, the script needs to be started by a non-user account. If I put the startup script in /usr/local/etc/rc.d/hobbit.sh How do I get it to start using the user account 'hobbit' Thanks ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] -- But like the Good Book says... There's BIGGER DEALS to come! You can use su, a very simple example: script.sh: su carpetsmoker startup.sh startup.sh: echo Hello, I am now running as user carpetsmoker set See the su man page for more information Hope this helps. Martin ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Daylight savings time / 6.1 and 4.11
On Jan 18, 2007, at Thursday, Jan18, 2007 5:36 PM, Murray Taylor wrote: This is an issue here at work. We have very many FreeBSD 4.x machines and a growing number of FreeBSD 6.x. The change when daylight saving time starts and ends is an issue for machines in the United States and, we think, those in Canada. The way to check if your zone file is correct is to do zdump -v /etc/localtime | more Look for the following /etc/localtime Sun Mar 11 09:59:59 2007 UTC = Sun Mar 11 01:59:59 2007 PST isdst=0 gmtoff=-28800 /etc/localtime Sun Mar 11 10:00:00 2007 UTC = Sun Mar 11 03:00:00 2007 PDT isdst=1 gmtoff=-25200 /etc/localtime Sun Nov 4 08:59:59 2007 UTC = Sun Nov 4 01:59:59 2007 PDT isdst=1 gmtoff=-25200 /etc/localtime Sun Nov 4 09:00:00 2007 UTC = Sun Nov 4 01:00:00 2007 PST isdst=0 gmtoff=-28800 If you see this, your zone file will handle the change correctly. The 6.x series has the corrected zone files. 4.x does not have this. The best way to handle this is to copy the zone file from /usr/share/zoneinfo on a 6.x machine to your 4.x. Josef Interesting: Just did an upgrade to 6.2-STABLE from 6.1-RELEASE-p10 and here is what I see. uname -r 6.2-STABLE zdump -v -c 2008 MST7MDT MST7MDT Sun Mar 11 08:59:59 2007 UTC = Sun Mar 11 01:59:59 2007 MST isdst=0 gmtoff=-25200 MST7MDT Sun Mar 11 09:00:00 2007 UTC = Sun Mar 11 03:00:00 2007 MDT isdst=1 gmtoff=-21600 MST7MDT Sun Nov 4 07:59:59 2007 UTC = Sun Nov 4 01:59:59 2007 MDT isdst=1 gmtoff=-21600 MST7MDT Sun Nov 4 08:00:00 2007 UTC = Sun Nov 4 01:00:00 2007 MST isdst=0 gmtoff=-25200 Shows the new MST - MDT and MDT - MST dates zdump -v -c 2008 /etc/localtime /etc/localtime Sun Apr 1 08:59:59 2007 UTC = Sun Apr 1 01:59:59 2007 MST isdst=0 gmtoff=-25200 /etc/localtime Sun Apr 1 09:00:00 2007 UTC = Sun Apr 1 03:00:00 2007 MDT isdst=1 gmtoff=-21600 /etc/localtime Sun Oct 28 07:59:59 2007 UTC = Sun Oct 28 01:59:59 2007 MDT isdst=1 gmtoff=-21600 /etc/localtime Sun Oct 28 08:00:00 2007 UTC = Sun Oct 28 01:00:00 2007 MST isdst=0 gmtoff=-25200 Shows the old MST - MDT and MDT - MST dates What did I miss? What do I do next? hal ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: gsfonts in X ?
Firas Kraiem wrote: Hello everyone ! My problem is that fonts look really horrible in most websites (see screenshot at the end of this message). The same problem occured in various Linux distros and was solved by installing the gsfonts-x11 package. How would I do the same in FBSD ? The print/gsfonts port is installed but I guess I need to do something else. Any ideas ? For my own part I simply turn off anti-aliasing: ?xml version=1.0? !DOCTYPE fontconfig SYSTEM fonts.dtd fontconfig match target=font edit mode=assign name=antialias boolfalse/bool /edit /match /fontconfig However, one person wrote to me and said that it worked better for him to turn off the use of color for sub-pixel anti-aliasing, like this: ?xml version=1.0? !DOCTYPE fontconfig SYSTEM fonts.dtd fontconfig match target=font edit mode=assign name=rgba constnone/const /edit /match /fontconfig Maybe one of these will work for you if you put it in ~/.fonts.conf. -- Tore ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
bash or bash2
Hi...just that questionwhich one is better for an open server enviroment? are there big diferences?? thanxsss ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: bash or bash2
On 1/20/07, Agus [EMAIL PROTECTED] wrote: Hi...just that questionwhich one is better for an open server enviroment? are there big diferences?? bash is actually bash3, so go with it. It's newer. zsh is better :-) ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Problem upgrading from 6.1-RELEASE to 6.2-RELEASE
Amarendra Godbole wrote: Fetching metadata index... done. Fetching 1 metadata patches. done. Applying metadata patches... done. Fetching 1 metadata files... failed. Is this because of a connectivity issue on my end, or some issue with update1.freebsd.org? I don't see any connectivity issues from my side though. Thanks in advance. The server has rebooted a couple of times in the past week (I needed to upgrade it, too!) so it's possible that you were just happened to hit the window when it was inaccessible. Aside from that, I haven't seen any connectivity problems -- but the internet being as unreliable as it is, it's entirely possible. FWIW, no files are installed until after everything is fetched, so if the downloading fails, you can always try again. Colin Percival ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: startup script with non-root user
Thanks so much Martin Greg. I give these a try. Don ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Nautilus fails to burn DVD
When right clicking on an .ISO file to burn to my DVD player I get the error: Error writing to disk There was an error writing to disk: Unhandled error, aborting The correct permissions are set, the user can burn a DVD from the command line by growisofs -dvd-compat -Z /dev/cd0=image.iso I have not tried burning anything other than ISOs with nautilus. The user can mount and view DVDs from inside nautilus. If I try and burn the ISO without a blank DVD inside, nautilus warns me about that, and prompts me to insert a blank disc. I have Gnome 2.16.2 installed from packages, installed on 1/19/07 by pkg_add -r gnome2. uname -a FreeBSD fozzy.ucsc.edu 6.2-STABLE FreeBSD 6.2-STABLE #2: Fri Jan 19 14:40:35 PST 2007 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/FOZZY i386 ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
test
Sorry ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Problems with custom kernel fbsd 6.2
Hi, Thanks for trying to help, but that didn't seem to be it. It did the same thing, with the same error. Can you think of anything else that may be wrong? I'm considering rebuilding it again with debugging on, and using script to output it to a log. It has to be something in my config though, simply because the only thing different between my generic and custom compiles is the config file. I don't know how to make it not compile certain things with make, which makes my compile take awhile on it because of its specs. I've read something on how to do that, I just don't 'know' how to do it yet. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
handbook section 25.9.2.3 appears dated (Samba3)
Just installed latest ports/net/samba3 and the smb.conf file disagrees with section 25.9.2.3 Security Settings (Samba) of the handbook with respect to the default authentication mode so far as I can tell - look like smbpasswd has been replaced with something newer? Steve -- Steve Franks, KE7BTE Staff Engineer La Palma Devices, LLC http://www.lapalmadevices.com (520) 312-0089 ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: handbook section 25.9.2.3 appears dated (Samba3)
On Fri, Jan 19, 2007 at 08:23:23PM -0700, Steve Franks wrote: Just installed latest ports/net/samba3 and the smb.conf file disagrees with section 25.9.2.3 Security Settings (Samba) of the handbook with respect to the default authentication mode so far as I can tell - look like smbpasswd has been replaced with something newer? Check the samba documentation (and then consider submitting an update once you've found the answer). kris pgpQYR8fbZvj0.pgp Description: PGP signature
haldaemon User Not Created
I just did a fresh install of FreeBSD 6.2 booting directly from CD 1 and when asked to see the packages collection on disc, I said yes and proceeded to install gnome2. After rebooting into the new install, I edited my rc.conf to turn on dbus, hald, polkitd, and avahi-daemon. After rebooting again I received an error message that the haldaemon user did not exist. I checked the install script for hald, and it does indeed include a command to create this user, but apparently it doesn't work when installing off the CD before rebooting into the new install. It is considered incorrect to install gnome2 in this manner? Or is this a bug? I worked around this by force deleting and reinstalling the hald package. This successfully created the user. A second question: the FAQ at http://www.freebsd.org/gnome/docs/faq2.html#full-gnome says to add gnome_enable=YES to take care of dbus, hald, etc in one configuration line. This doesn't seem to work. It seems like you need a separate enable for dbus, hald, polkitd, and avahi-daemon. What am I missing? Sincerely, Jason ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: [SOLVED] re(4) incorrect checksum
On Thu, Jan 11, 2007 at 05:34:19PM +0100, Pietro Cerutti wrote: On 1/11/07, Pyun YongHyeon [EMAIL PROTECTED] wrote: In if_re.c, rev 1.46.2.18 wpaul@ fixed a long standing checksum offload issue by padding. Does re(4) work when you disable only Tx checksum offload?(i.e. ifconfig re0 -txcsum) yes, because -txcsum also disables Rx checksum on my NIC. # ifconfig re0 options=1bRXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING # ifconfig re0 -txcsum options=18VLAN_MTU,VLAN_HWTAGGING How about attached one? Please make sure to test 'ping -s 1473 ipaddr_of_gateway'. -- Regards, Pyun YongHyeon Index: if_rlreg.h === RCS file: /home/ncvs/src/sys/pci/if_rlreg.h,v retrieving revision 1.64 diff -u -r1.64 if_rlreg.h --- if_rlreg.h 16 Jan 2007 20:35:23 - 1.64 +++ if_rlreg.h 20 Jan 2007 05:05:21 - @@ -443,7 +443,12 @@ #define RL_RX_BUF_SZ RL_RXBUF_64 #define RL_RXBUFLEN(1 ((RL_RX_BUF_SZ 11) + 13)) #define RL_TX_LIST_CNT 4 -#define RL_MIN_FRAMELEN60 +/* + * re(4) hardware IPv4 Tx checksum offload could be mangled with 28 bytes + * or less IP packets. + */ +#define RL_TXCSUM_MINLEN 28 +#define RL_MIN_FRAMELEN(ETHER_HDR_LEN + RL_TXCSUM_MINLEN) #define RL_TXTHRESH(x) ((x) 11) #define RL_TX_THRESH_INIT 96 #define RL_RX_FIFOTHRESH RL_RXFIFO_NOTHRESH ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: FreeBSD challenged by Internet
RW wrote: On Thu, 18 Jan 2007 23:14:33 -0800 Ted Mittelstaedt [EMAIL PROTECTED] wrote: - Original Message - From: RW [EMAIL PROTECTED] To: freebsd-questions@freebsd.org Sent: Thursday, January 18, 2007 7:43 AM Subject: Re: FreeBSD challenged by Internet On Thu, 18 Jan 2007 00:43:02 -0800 Ted Mittelstaedt [EMAIL PROTECTED] wrote: The OP said that there was no problem with linux and windows, and that's consistent with what I saw on my d-link ADSL router. Presumably FreeBSD is doing something slightly different. Yes, it is, it's making IPv6 DNS queries. In my case, compiling-out IPv6 support from the kernel was the first thing I tried, and it didn't make much difference. The DNS proxy worked properly with Windows, but not FreeBSD. These problems is particularly acute in countries where PPPoA is the norm. And the other thing is that just about all the DSL setups I've seen in bridging mode do the PPPoE/PPPoA conversion automagically. There's a history of PPPoE in the US, so people expect to have it, even over ATM. In the UK BT turned-on PPPoEoA a few years ago, but didn't really tell anyone, BT resellers generally don't provide much support for it. LLU operators haven't bothered, because there's no real demand. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] Careful if you say no to IPv6 in make.conf, my sendmail server wouldnt start after I did that until I commented out the IPv6 stuff from sendmail.cf. Bri ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Password on command line with SCP
Is there any way to pass the password for an SCP command via the command line as a switch? I'd like to embed SCP in a script and pass the password once through a command line input from the master script... By defauly any time I use the -B mode it says passwords are required, and without -B it asks for the password after the command starts to execute. Thanks! ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Password on command line with SCP
Don O'Neil wrote: Is there any way to pass the password for an SCP command via the command line as a switch? I'd like to embed SCP in a script and pass the password once through a command line input from the master script... By defauly any time I use the -B mode it says passwords are required, and without -B it asks for the password after the command starts to execute. Thanks! ___ The only way I know of is to use keys for your authentication. You then can use 'scp -B -i somekeyfile file1 file2 ... example.com:.' Hope that helps. Cheers, Jeff ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
SSH2 question?
Hello I have two questions, please comment... 1. Can one user have more than one public_keys i.e. multiple public_keys? If yes to above, would all be stored at users path like /home/username/.ssh If yes, to above, would all public keys be written at the same line for option in ssh_config file AuthorizedKeysFile? AuthorizedKeysFile .ssh/user_authorized_keys 2. What about other users who also have SSH account, How to indentify in ssh_config file that which public_key belongs to which user? -- Thanks! BR / vj ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
SATA II drives
I have a Promise Tx4 SATA II card with a 1/4 terabyte SATA II Western digital drive. This drive has some free space, a windows partition and a Mepis 6.0 Linux partition. Will BSD work with a SATA II drive? Will it see the other operating systems? ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Password on command line with SCP
In the last episode (Jan 20), Jeff Royle said: Don O'Neil wrote: Is there any way to pass the password for an SCP command via the command line as a switch? I'd like to embed SCP in a script and pass the password once through a command line input from the master script... By defauly any time I use the -B mode it says passwords are required, and without -B it asks for the password after the command starts to execute. The only way I know of is to use keys for your authentication. You then can use 'scp -B -i somekeyfile file1 file2 ... example.com:.' You can also use ports/lang/expect to script entering the password, but it's more fragile than using keys. -- Dan Nelson [EMAIL PROTECTED] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
