The fdisk -I da1 failed with SCSI parity error, so I took another look at the
manual for the 9GB drives and noticed that the J-4 pin block (12 pairs of pins
where SCSI Device ID's are set) on these drives says Pin 11 is a Disable SCSI
Parity Check jumper. I added a jumper on pin 11 on both 9GB
Adam J Richardson wrote:
[EMAIL PROTECTED] wrote:
On Fri, 20 Apr 2007, Milan Knizek wrote:
Hello,
is there an emulator or virtual machine, which would run MS Windows
on FreeBSD
as a host system and support USB devices? (I do not mean USB Mass
Storage,
but e.g. Garmin GPS device with
From: Grant Peel [EMAIL PROTECTED]
Hi all,
I am posting this question here because I know there are alot of ISPs using
FreeBSD (including me) and am hoping to get feedback, either directly to me
or to the list.
We are wrestling (as I am sure many are), with spam. Up until now we have
been
Hi,
I have a Marvell Yukon 88E8050 Gigabit Ethernet which came with my
motherboard. When looking for it's driver I found that RELENG_6
supports it, and the driver is located at sys/dev/msk/ But I am using
RELENG_6_2.
Is it advisable to take this driver from RELENG_6 to RELENG_6_2? Is
there some
Grant Peel wrote:
Hi all,
I am posting this question here because I know there are alot of ISPs using
FreeBSD (including me) and am hoping to get feedback, either directly to me or
to the list.
We are wrestling (as I am sure many are), with spam. Up until now we have been
employing
Eric,
I think that Easyantispam is a reseller for mailfoundry.
Have you some expierience with mailfoundry? If so, I would like to hear you
feedback.
-Grant
- Original Message -
From: Eric Crist [EMAIL PROTECTED]
To: Grant Peel [EMAIL PROTECTED]
Cc: freebsd-questions@freebsd.org
Thnx to everyone for your replies,
A colleague has provided me with his hand notes of an older crash screen,
it has the following(however i cant guarantee it is accurate, it is
handnotes).
Fatal trap 12: page fault while in kernel mode
cpuid=0; apicid=00
fault virtual address=0xac
On Thu, Apr 19, 2007 at 01:06:18PM -0700, [EMAIL PROTECTED] wrote:
Hello Everyone!
Hi dude,
A FreeBSD Grasshopper needs help.
Working with
PIII 1Ghz.
1/2 gig ram
two 80 gig drives
One 4 port D-link NIC.
Freebsd 6.2 stable +Gnome Xorg, webmin installed
I have comcast with a
I have wireless hotspot device (Handlink WG-601) which I need to replace with
FreeBSD machine.
The device has following functionality I need to replicate:
1. It has dhcp server (that's easy)
2. It makes NAT between it's internal interfaces and wan interface (easy
too, but look at 3).
3. It
Angelin Lalev wrote:
I have wireless hotspot device (Handlink WG-601) which I need to replace with FreeBSD machine.
The device has following functionality I need to replicate:
1. It has dhcp server (that's easy)
2. It makes NAT between it's internal interfaces and wan interface (easy too, but
Chris Slothouber wrote:
Angelin Lalev wrote:
I have wireless hotspot device (Handlink WG-601) which I need to
replace with FreeBSD machine. The device has following functionality I
need to replicate:
1. It has dhcp server (that's easy) 2. It makes NAT between it's
internal interfaces and wan
Hi, I've run into some problems installing FreeBSD 6.2 on my Core 2
Duo machine equipped with a MSI P965 Neo motherboard with a Jmicron
361 RAID PATA/SATA controller, and an Intel ICH8 SATA controller. The
PATA cdrom is connected to the Jmicron controller.
It seems like all the disks are
Grant
I'd look at your SA setup, make sure you're running v 3.1.8 abd have
saupdate-ed recently.
Also make sure you're running the URI-RBLs, dcc and razor2.
Third party rules from www.rulesemporium.com are a must are as is the the
imageinfo plugin.
You could always ask on the spamassassin
On Sat, 21 Apr 2007 09:38:36 -0400, Chris Slothouber [EMAIL PROTECTED] wrote:
Chris Slothouber wrote:
Angelin Lalev wrote:
I have wireless hotspot device (Handlink WG-601) which I need to
replace with FreeBSD machine. The device has following functionality I
need to replicate:
1. It has
Following the doc below, I am trying to mirror an existing disk, ad0,
which holds the root and /usr partitions (a second disk holds /var). I
have an exact same disk in as ad2 in the system and did everything in
this document top section through dumping the data and setting up
/etc/fstab and
On Apr 21, 2007, at 7:54 AM, Angelin Lalev wrote:
I have wireless hotspot device (Handlink WG-601) which I need to
replace with FreeBSD machine.
The device has following functionality I need to replicate:
1. It has dhcp server (that's easy)
2. It makes NAT between it's internal interfaces
On Saturday 21 of April 2007, Adam J Richardson wrote:
[EMAIL PROTECTED] wrote:
On Fri, 20 Apr 2007, Milan Knizek wrote:
is there an emulator or virtual machine, which would run MS Windows on
FreeBSD
as a host system and support USB devices? (I do not mean USB Mass
Storage,
but e.g.
On Fri, 20 Apr 2007, Derek Ragona spaketh thusly:
-}
-}If your volume of mail is 5 per day don't use the baracuda. It won't
-}keep up.
I think this greatly depends on the model. I've not used the 200 but it
certainly is a small box. My experience shows the 600 could easily handle
this per
Adam J Richardson wrote:
Hi all,
Firstly, apologies for the length of this. It's my first mailing list
posting, so I hope I'm not breaching any etiquette codes. Also I've only
been using FreeBSD for a couple of years, so I'm still very new to the
system.
I have recently become the proud
Hi,
I'm doing a project involving IPv6 extension headers. I want to know
if FreeBSD provides access to APIs that are set or extract IPv6 header
fields
_
Love Games? Gamesville is Waiting for You...
Free Online
Angelin Lalev wrote:
I have wireless hotspot device (Handlink WG-601) which I need to replace with FreeBSD machine.
The device has following functionality I need to replicate:
1. It has dhcp server (that's easy)
2. It makes NAT between it's internal interfaces and wan interface (easy too, but
Hi Grant,
I'm using postfix and a very good sets of pcre rules which takes care of
more than 90% of all spam.
Spamassassin will do the rest. The only spam I receive is on my postmaster
account.
Postfix uses greylisting, a set of rbl lists and a pcre rule set op the helo
check and
On Sat, 2007-04-21 at 11:39 -0400, Robert Fitzpatrick wrote:
Following the doc below, I am trying to mirror an existing disk, ad0,
which holds the root and /usr partitions (a second disk holds /var). I
have an exact same disk in as ad2 in the system and did everything in
this document top
I want to dedicate the entire disk to a single FreeBSD partition (da1s1a), and
am a little confused about editing partitions via bsdlabel -e slicename.
Prior to editing, it looks like this:
# /dev/da1s1:
8
Hi,
I am running FreeBSD 6.2 RELEASE and I have the above card in my DELL's
latitude c810 cardbus.
I followed the instructions on the page below and configure the kernel
accordingly:
http://www.freebsdmall.com/~loader/en_US.ISO8859-1/articles/wireless/article.html
i get the message about:
On Sat, Apr 21, 2007 at 02:54:54PM +0530, Rajkumar S wrote:
Hi,
I have a Marvell Yukon 88E8050 Gigabit Ethernet which came with my
motherboard. When looking for it's driver I found that RELENG_6
supports it, and the driver is located at sys/dev/msk/ But I am using
RELENG_6_2.
Is it
On 21/04/07, L Goodwin [EMAIL PROTECTED] wrote:
I want to dedicate the entire disk to a single FreeBSD partition (da1s1a), and
am a little confused about editing partitions via bsdlabel -e slicename.
Prior to editing, it looks like this:
The FreeBSD Diary contains a large number of practical
examples and how-to guides. This message is posted weekly
to freebsd-questions@freebsd.org with the aim of letting people
know what's available on the website. Before you post a question
here it might be a good idea to first search the
Oliver, the error is due to incorrect syntax (-e flag omitted). Try this:
grep -R /usr -e any2dvd
L Goodwin
Oliver Iberien [EMAIL PROTECTED] wrote: I need to find a reference to an
obscure delete port that is in some file
somewhere (in /usr/ports/? somewhere in /usr?) as it is messing up make
On Sat, Apr 21, 2007, L Goodwin wrote:
Oliver, the error is due to incorrect syntax (-e flag omitted). Try this:
grep -R /usr -e any2dvd
L Goodwin
Oliver Iberien [EMAIL PROTECTED] wrote: I need to find a reference to an
obscure delete port that is in some file
somewhere (in /usr/ports/?
30 matches
Mail list logo
