On Mon, 20 Aug 2007 10:11:54 -0400 (EDT)
Michael S [EMAIL PROTECTED] wrote:
Thank you all for the suggestions. I am going to take
into consideration everything everyone wrote.
Michael
--- P.U.Kruppa [EMAIL PROTECTED] wrote:
On Sun, 19 Aug 2007, Michael S wrote:
Good day all,
On Wed, Aug 22, 2007 at 06:51:18AM +0200, Martin Schweizer wrote:
Hello Kris
Am Wed, Aug 22, 2007 at 12:37:25AM -0400 Kris Kennaway schrieb:
On Wed, Aug 22, 2007 at 06:22:46AM +0200, Martin Schweizer wrote:
After I updated my 4.11 to an 5.5 system (following /usr/src/UPDATING), I
get
On Wed, Aug 22, 2007 at 07:06:19AM +0200, Martin Schweizer wrote:
Hello Kris
Am Wed, Aug 22, 2007 at 06:51:18AM +0200 Martin Schweizer schrieb:
Am Wed, Aug 22, 2007 at 12:37:25AM -0400 Kris Kennaway schrieb:
On Wed, Aug 22, 2007 at 06:22:46AM +0200, Martin Schweizer wrote:
After I
Hello Kris
Am Wed, Aug 22, 2007 at 02:31:04AM -0400 Kris Kennaway schrieb:
Am Wed, Aug 22, 2007 at 12:37:25AM -0400 Kris Kennaway schrieb:
On Wed, Aug 22, 2007 at 06:22:46AM +0200, Martin Schweizer wrote:
After I updated my 4.11 to an 5.5 system (following /usr/src/UPDATING),
I
Affordable, High-Quality CEUs!
--
If you do not want to receive any more special offers or newsletters,
http://allceus.com/mail_list/?p=unsubscribeuid=4499e5ff375326efdcd9e044bebad6f3
To update your preferences and to unsubscribe visit
Guys,
If this is a re-post, sorry. I thought I mailed this to -questions.
Anyway, where are the pdf and pd and other ghostscript converters?
I thought these utilities were in the default distribution, but I
can't find them. pdfps, pdftoascii, and so
On Wed, Aug 22, 2007 at 12:35:47AM -0700, Gary Kline wrote:
Guys,
If this is a re-post, sorry. I thought I mailed this to -questions.
Anyway, where are the pdf and pd and other ghostscript converters?
I thought these utilities were in the default distribution, but
Hello,
During the build of the graphical portion of my new FreeBSD-powered
laptop I noticed that some knobs are not listed in /usr/ports/KNOBS and
so, I can't add them to make.conf before building the packages.
When I run make fetch-recursive for fluxbox, I get :
WITH_DEBUG=yes Build
Gary Kline wrote:
Guys,
If this is a re-post, sorry. I thought I mailed this to -questions.
Anyway, where are the pdf and pd and other ghostscript converters?
I thought these utilities were in the default distribution, but I
can't find them. pdfps,
Rakhesh Sasidharan wrote:
Another (related) question: both gvinum and the geom utilities like
gmirror and gstripe etc provide for RAID0, RAID1, and RAID3. Any
advantages/ disadvantages of using one instead of the other?
There has been a polemic between Greg Lehey and PJ Dawidek about the
Hello,
Recently we got some trouble on some FreeBSD 6.2-STABLE servers
(GENERIC kernel). Some python scripts are working on these servers and
after a day or two we get 0% idle in the CPU states. After sometime,
the operating system will unable to do even simple task like resolving
DNS name and
Dear Both,
Could you help me to check IBM x3250 server Ethernet controllers which can
support FreeBSD? And the Server Ethernet is Broadcom NetXtreme.
THX!
Best Regards,
King Wong
___
freebsd-questions@freebsd.org mailing list
Chuck Swiger [EMAIL PROTECTED] writes:
You should configure squid to use no more than about 60 - 70% of the
available physical RAM-- ie, set the cache_mem parameter to about 2.5
or 3GB.
Better yet, don't run Squid at all. It was designed for a computer
architecture that was already obsolete
Dag-Erling Smørgrav wrote:
Chuck Swiger [EMAIL PROTECTED] writes:
You should configure squid to use no more than about 60 - 70% of the
available physical RAM-- ie, set the cache_mem parameter to about 2.5
or 3GB.
Better yet, don't run Squid at all.
Ok, then what do you recommend
On Wed, Aug 22, 2007 at 09:54:08AM +0200, Gabriel Linder wrote:
Hello,
During the build of the graphical portion of my new FreeBSD-powered
laptop I noticed that some knobs are not listed in /usr/ports/KNOBS and
so, I can't add them to make.conf before building the packages.
I don't see why
Hello,
I've a machine with 3 SATA drives. The first (ad8) with a standard
FreeBSD install in a single slice with /boot/boot0 MBR. The remaining
two drives (ad10, ad12) are in a RAID1 mirror with 3 slices, and used
for storing data. They have the /boot/mbr MBR.
After booting off various USB
You should configure squid to use no more than about 60 - 70% of the
available physical RAM-- ie, set the cache_mem parameter to about 2.5
or 3GB.
Better yet, don't run Squid at all.
Ok, then what do you recommend instead of Squid?
Varnish.
http://varnish.projects.linpro.no/
--
Ganbold [EMAIL PROTECTED] writes:
Dag-Erling Smørgrav [EMAIL PROTECTED] writes:
Better yet, don't run Squid at all.
Ok, then what do you recommend instead of Squid?
That depends on what you use it for...
DES
--
Dag-Erling Smørgrav - [EMAIL PROTECTED]
One other question -a bit silly:
If I use that configuration as the gateway, can it be left on and
working 24x7? I mean, regarding the _hardware_, how often does it need
to be powered off: once a day, once a week, ... to prevent hardware
failures such as HDD crash?
Bahman
On 8/21/07, Bahman M.
On Wed, 22 Aug 2007 13:17:17 +0200
Roland Smith [EMAIL PROTECTED] wrote:
On Wed, Aug 22, 2007 at 09:54:08AM +0200, Gabriel Linder wrote:
Hello,
During the build of the graphical portion of my new FreeBSD-powered
laptop I noticed that some knobs are not listed in /usr/ports/KNOBS
and
From: Bahman M. [EMAIL PROTECTED]
To: freebsd-questions@freebsd.org
Subject: SATA to PCI cards
Date: Tue, 21 Aug 2007 13:39:01 +0330
Hi all,
I'm running FreeBSD 6.2.
$ uname -a
FreeBSD attila 6.2-RELEASE FreeBSD 6.2-RELEASE #0: Fri Jan 12 10:40:27
UTC 2007 [EMAIL
Michael S skrev:
Good day all,
I decided to add GUI to my GUI-less FreeBSD machine. I
am considering installing Gnome, which I haven't used
for long while and the last time was on Linux anyway.
The reason is that most of my favorite applications
use gtk libraries, like Firefox, GAIM (can't get
Hi All,
I have a general question.
We have access to some new AMD64 based Dell Servers with 2 Core Duo
Xeons. We are currently using i386 Dell Servers with a core duo
processor. I recall from my MS Windows days that when there was the
shift from 16-bit to 32-bit processors it did take a
Bahman M. wrote:
One other question -a bit silly:
If I use that configuration as the gateway, can it be left on and
working 24x7? I mean, regarding the _hardware_, how often does it need
to be powered off: once a day, once a week, ... to prevent hardware
failures such as HDD crash?
Bahman
xorg.conf at bottom of email.. I Followed these instructions,
http://www.bsdforums.org/forums/archive/index.php/t-47986.html
except without nvidia driver
cause i have intel 855i or somthing chipset.
ps. i dont have compat5 enabled in rc.conf
I try to start emerald... i receive no errors, just
On Wed, Aug 22, 2007 at 04:07:42PM +0330, Bahman M. wrote:
One other question -a bit silly:
If I use that configuration as the gateway, can it be left on and
working 24x7? I mean, regarding the _hardware_, how often does it need
to be powered off: once a day, once a week, ... to prevent
On Wed, Aug 22, 2007 at 08:44:31AM +0200, Martin Schweizer wrote:
Hello Kris
Am Wed, Aug 22, 2007 at 02:31:04AM -0400 Kris Kennaway schrieb:
Am Wed, Aug 22, 2007 at 12:37:25AM -0400 Kris Kennaway schrieb:
On Wed, Aug 22, 2007 at 06:22:46AM +0200, Martin Schweizer wrote:
After I
On Wed, Aug 22, 2007 at 08:58:34AM -0400, Arend P. van der Veen wrote:
Hi All,
I have a general question.
We have access to some new AMD64 based Dell Servers with 2 Core Duo
Xeons. We are currently using i386 Dell Servers with a core duo
processor. I recall from my MS Windows days
Hi all,
I have been trying to get openLDAP up and running before I decide to integrated
into a number of aplications.
The port currently install are:
openldap-sasl-client-2.4.3.aopenldap-server-2.4.3.a
db4-4.0.14_1,1
After restarting the service and looking at the logs,
On 8/22/07, Gabriel Linder [EMAIL PROTECTED] wrote:
Hello,
During the build of the graphical portion of my new FreeBSD-powered
laptop I noticed that some knobs are not listed in /usr/ports/KNOBS and
so, I can't add them to make.conf before building the packages.
When I run make
-questions/attachments/20070822/a6
044428/attachment-0001.pgp
--
Message: 8
Date: Wed, 22 Aug 2007 00:37:25 -0400
From: Kris Kennaway [EMAIL PROTECTED]
Subject: Re: ldconfig problem after upgrade 4.11 to 5.5
To: freebsd-questions@freebsd.org
Message-ID: [EMAIL PROTECTED
Alexandre Biancalana [EMAIL PROTECTED] writes:
Dag-Erling Smørgrav [EMAIL PROTECTED] writes:
Ganbold [EMAIL PROTECTED] writes:
Ok, then what do you recommend instead of Squid?
That depends on what you use it for...
What the options for forward proxy/cache with user authentication and
On 8/22/07, Dag-Erling Smørgrav [EMAIL PROTECTED] wrote:
Ganbold [EMAIL PROTECTED] writes:
Dag-Erling Smørgrav [EMAIL PROTECTED] writes:
Better yet, don't run Squid at all.
Ok, then what do you recommend instead of Squid?
That depends on what you use it for...
What the options for
Hi!
After installing (in the jail) mysql-server-5.0.45 from ports,
I can`t get up and running my mysql server.
I have to point out that this problem is only inside the jail.
All I have is:
1) clean mysql-server install
2) default my.cnf (small systems)
3) mysql_enable=YES
After this server
On Wed, Aug 22, 2007 at 09:06:50PM +0800, amin wrote:
Hi,
I have six servers running FreeBSD 6.2 and all of them have the same config.
My servers are configured to run as a socks5 proxy server.
Lately the servers are going down without any good reasons. How do I check
what are the errors or
Greetings to all,
I'm trying to set up an automated system wherein snapshots of the file
system are taken prior to a backup run. The problem I'm running into
can best be described by the following bug report:
http://www.freebsd.org/cgi/query-pr.cgi?pr=100365cat=
I get this same problem
On Wed, 22 Aug 2007 09:32:34 -0400
Maxim Khitrov [EMAIL PROTECTED] wrote:
On 8/22/07, Gabriel Linder [EMAIL PROTECTED] wrote:
Hello,
During the build of the graphical portion of my new FreeBSD-powered
laptop I noticed that some knobs are not listed in /usr/ports/KNOBS
and so, I can't
On Wed, Aug 22, 2007 at 10:01:35AM -0400, Chris Morris wrote:
Greetings to all,
I'm trying to set up an automated system wherein snapshots of the file
system are taken prior to a backup run. The problem I'm running into
can best be described by the following bug report:
On Tuesday 21 August 2007 20:54:36 N. Harrington wrote:
Hello
I feel stupid, but I am confused about kern.maxdsiz (or datasize via
limits command) on FreeBSD amd64.
I have seen many posts and suggestions to raise it to 1G. However it seems
this only applies to i386. By default, on servers
On Wed, Aug 22, 2007 at 08:58:34AM -0400, Arend P. van der Veen wrote:
- Will the AMD64 based FreeBSD 6.2 distribution with applications such as
Postgresql, Apache, Python, Tomcat and SBCL be able to take advantage of
the 64-bit quad processor?
Yes, if you compile them natively on AMD64.
Hello Kris
Am Wed, Aug 22, 2007 at 09:20:51AM -0400 Kris Kennaway schrieb:
After I updated my 4.11 to an 5.5 system (following
/usr/src/UPDATING), I get
around 63 error messages while the system boot up:
ldconfig: /var/run/ld.so.hints: No such file or directory
Hello everyone :)
I'm trying to get some natd stats such as
number of active connections
List of active connections and originating IP
Destination ports
Destination IPs...
I would grab those informations from 5 to 5 minutes or so...
Even better would be to be able to grab those through snmp...
On 20/08/07, Ian Smith [EMAIL PROTECTED] wrote:
Sorry for the repeat post folks, but I goofed last time, leaving out the
subject line while replying to the digest. Still curious .. Ian
===
On Sat, 18 Aug 2007 21:32:28 +0200 Erik Trulsson [EMAIL PROTECTED] wrote:
On Sat, Aug 18, 2007
On Wed, Aug 22, 2007 at 09:06:50PM +0800, amin wrote:
Hi,
I have six servers running FreeBSD 6.2 and all of them have the same config.
My servers are configured to run as a socks5 proxy server.
Lately the servers are going down without any good reasons. How do I check
what are the errors or
On Tue, Aug 21, 2007 at 04:04:47PM -0700, Philip Hallstrom wrote:
fetch -avrpAFU ftp://loginid:[EMAIL PROTECTED]/IDX/ActivePhotos/*/*.*
The /*/ directory is 2 positions in size and
contains 00 through 99 as directory names.
The *.* means all files in this directory.
When I execute this I
Grant Peel [EMAIL PROTECTED] writes:
I was wondering what the concensus is on using dynamic rules in IPFW. Every
once in a while, I suppose there is a DoS attaclk that causes me to see
hundreds of:
+ipfw: install_state: Too many dynamic rules
in my security log.
I am sure i read
On Mon, Jun 11, 2007 at 08:40:05AM -0400, Tuc at T-B-O-H.NET wrote:
Hi,
Having a problem installing 5.5 on a Toshiba 2805-S301 laptop.
(I *HAVE* to load 5.5 on it for various reasons). I can load 5.4
perfectly, but as soon as I go to 5.5, the kernel won't boot. If
I boot in 5.4 with
On Wed, Aug 22, 2007 at 12:27:51PM +0100, Christopher Key wrote:
Hello,
I've a machine with 3 SATA drives. The first (ad8) with a standard
FreeBSD install in a single slice with /boot/boot0 MBR. The remaining
two drives (ad10, ad12) are in a RAID1 mirror with 3 slices, and used
for
On Wed, Aug 22, 2007 at 04:07:42PM +0330, Bahman M. wrote:
One other question -a bit silly:
If I use that configuration as the gateway, can it be left on and
working 24x7? I mean, regarding the _hardware_, how often does it need
to be powered off: once a day, once a week, ... to prevent
On Wednesday 22 August 2007 08:32:05 Claus Guttesen wrote:
You should configure squid to use no more than about 60 - 70% of the
available physical RAM-- ie, set the cache_mem parameter to about 2.5
or 3GB.
Better yet, don't run Squid at all.
Ok, then what do you recommend
On Aug 22, 2007, at 3:53 AM, Dag-Erling Smørgrav wrote:
Chuck Swiger [EMAIL PROTECTED] writes:
You should configure squid to use no more than about 60 - 70% of the
available physical RAM-- ie, set the cache_mem parameter to about 2.5
or 3GB.
Better yet, don't run Squid at all. It was
On Aug 22, 2007, at 2:34 AM, Nguyen Tam Chinh wrote:
Please advice how to debug this overload problem.
Thank you very much!
--
%top
last pid: 12901; load averages: 8.68, 8.65, 8.65up 1
+20:44:06 04:15:12
1438 processes:9 running, 1429 sleeping
Look at the
Thanks.
But the servers are dedicated servers rented from a datacenter. I'm not sure
if it hangs or panic. The provider just keep rebooting when we said servers
not responding.
Will try to use mbmon. Is there any ports I can use to log what actually
happened before it hangs or crashes?
Hi all,
I was playing around with rc.conf under /etc and accidentally didn't quote
properly one of my YES entries, now the system won't boot. I tried booting
into single user and re-editing the file, yet the time I tried saving it it
tells me that the root files systm is read only. Is ther a
Lisandro Grullon escribió:
Hi all,
I was playing around with rc.conf under /etc and accidentally didn't quote properly one of my YES entries, now the system won't boot. I tried booting into single user and re-editing the file, yet the time I tried saving it it tells me that the root files systm
Hi all
I have desktop computer to our user access to use eg:
web browser. office
ls there any way to limit the server resource per
user?
thank you
Take the Internet to Go: Yahoo!Go puts the Internet
Date: Wed, 22 Aug 2007 19:36:02 +0200 From: [EMAIL PROTECTED] To: [EMAIL
PROTECTED] CC: freebsd-questions@freebsd.org Subject: Re: Need to edit
rc.conf, but FS won't allow. Lisandro Grullon escribió: Hi all, I
was playing around with rc.conf under /etc and accidentally didn't quote
ann kok wrote:
Hi all
I have desktop computer to our user access to use eg:
web browser. office
ls there any way to limit the server resource per
user?
Have a look a login.conf (man 5 login.conf)
Peter
--
http://www.boosten.org
___
On Tue, 21 Aug 2007, Dan Mahoney, System Admin wrote:
Hello,
I am encountering a bug with named-9.4.1-P1 that I am attempting to work with
ISC on, that I have built from ports (dns/bind94).
That's great, every little bit helps. :) You might also be interested to
know that they have a new
Christopher Key [EMAIL PROTECTED] writes:
I've a machine with 3 SATA drives. The first (ad8) with a standard
FreeBSD install in a single slice with /boot/boot0 MBR. The remaining
two drives (ad10, ad12) are in a RAID1 mirror with 3 slices, and used
for storing data. They have the /boot/mbr
Can syslogd provide failover redundancy to another box?
Should I configure my devices to send to two different syslogd servers?
(if the devices allow more then one syslogd box to log to. If not I
would like to know if the first option is available.)
On Aug 22, 2007, at 1:29 PMAug 22, 2007, Sean Murphy wrote:
Can syslogd provide failover redundancy to another box?
Should I configure my devices to send to two different syslogd
servers? (if the devices allow more then one syslogd box to log
to. If not I would like to know if the first
On Thu, Aug 23, 2007 at 01:19:10AM +0800, Aminuddin wrote:
Thanks.
But the servers are dedicated servers rented from a datacenter.
Then get their tech support involved. See if they can log in on the console.
I'm not sure if it hangs or panic. The provider just keep rebooting
when we said
Kris Kennaway wrote:
On Wed, Aug 22, 2007 at 09:06:50PM +0800, amin wrote:
Hi,
I have six servers running FreeBSD 6.2 and all of them have the same config.
My servers are configured to run as a socks5 proxy server.
Lately the servers are going down without any good reasons. How do I check
On Wed, Aug 22, 2007 at 01:32:30PM -0400, Lisandro Grullon wrote:
Hi all,
I was playing around with rc.conf under /etc and accidentally didn't quote
properly one of my YES entries, now the system won't boot. I tried
booting into single user and re-editing the file, yet the time I tried
I just rebooted my DNS server and now X fails. I'm pretty sure I
did everything re the xorg instructions in UPDATING. The error
message in /var/lob/Xorg.0.log says exactly::
(II) Loader running on freebsd
(II) LoadModule: pcidata
(WW) Warning, couldn't open module
thank you
Can I limit the bandwidth by user what they use any
program to download and upload?
thank you
--- Peter Boosten [EMAIL PROTECTED] wrote:
ann kok wrote:
Hi all
I have desktop computer to our user access to use
eg:
web browser. office
ls there any way to limit the
On Wed, Aug 22, 2007 at 12:11:47PM -0700, Gary Kline wrote:
I just rebooted my DNS server and now X fails. I'm pretty sure I
did everything re the xorg instructions in UPDATING. The error
message in /var/lob/Xorg.0.log says exactly::
(II) Loader running on freebsd
(II)
On Wed, 22 Aug 2007 12:11:47 -0700 Gary Kline wrote:
I just rebooted my DNS server and now X fails. I'm pretty sure I
did everything re the xorg instructions in UPDATING. The error
message in /var/lob/Xorg.0.log says exactly::
(II) Loader running on freebsd
(II)
On Wed, Aug 22, 2007 at 11:47:15AM +0400, Yuri Pankov wrote:
On Wed, Aug 22, 2007 at 12:35:47AM -0700, Gary Kline wrote:
Guys,
If this is a re-post, sorry. I thought I mailed this to -questions.
Anyway, where are the pdf and pd and other ghostscript converters?
I
On Wed, Aug 22, 2007 at 12:34:22PM -0700, ann kok wrote:
thank you
Can I limit the bandwidth by user what they use any
program to download and upload?
The pf firewall can do this. Filter packets by user, then assign them to
an appropriate queue. Read pf.conf(5). You'll have to rebuild the
On Wed, Aug 22, 2007 at 01:12:06AM -0700, Predrag Punosevac wrote:
Gary Kline wrote:
Guys,
If this is a re-post, sorry. I thought I mailed this to -questions.
Anyway, where are the pdf and pd and other ghostscript converters?
I thought these utilities were in the
I'm running FreeBSD 6.2 on a new (i.e. Core 2 Duo) Mac mini. It was
generally remarkably painless, except for getting up-to-date with Xorg.
I used Boot Camp Assistant to partition the disk, but I didn't install
rEFIt so I have to select windows' to boot FreeBSD. I got a double
fault when
It would appear that the proper allocation of filesystems on FreeBSD is
to put all data in /usr. I'm used to this and have been doing it for
years.
However, there's a few issues that keep coming up. A lot of the ports use
/var for data dirs. MySQL, Qmail, dspam are a few that I've had issues
On 8/22/07, Brad Waite [EMAIL PROTECTED] wrote:
It would appear that the proper allocation of filesystems on FreeBSD is
to put all data in /usr. I'm used to this and have been doing it for
years.
However, there's a few issues that keep coming up. A lot of the ports use
/var for data dirs.
I am experiencing a very strange issue when I sync up my FreeBSD file
server with my windows box using rsync. It seems as though the windows
files end up read only in a way that I can't change back to read write
using the standard windows tools, even if I delete it and create it
again, very
Dag-Erling Smørgrav wrote:
Ganbold [EMAIL PROTECTED] writes:
Dag-Erling Smørgrav [EMAIL PROTECTED] writes:
Better yet, don't run Squid at all.
Ok, then what do you recommend instead of Squid?
That depends on what you use it for...
DES
We are using several squid
Hi, not 100% sure where this is coming from, but in the past 7-10 days
(my port update times) something has triggered the following.
mplayer foo.flv results in it crashing with:
X11 error: BadAccess (attempt to access private resource denied)
MPlayer interrupted by signal 6 in module:
I think it may be a problem there, do you have any how to for that configur=
ation, in case I can double check. Off course besides the info provide at o=
penldap.org. Thanks in advance.
Sorry, I am pretty new with LDAP too :) I have no documentation beside
the one I found from Googling around.
mplayer foo.flv results in it crashing with:
X11 error: BadAccess (attempt to access private resource denied)
MPlayer interrupted by signal 6 in module: decode_video
Hey, I started getting that too. The only thing *I* linked
it to was I had installed nsplayer. Weird that they'd be
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
On 8/22/07, Brad Waite [EMAIL PROTECTED] wrote:
It would appear that the proper allocation of filesystems on FreeBSD is
to put all data in /usr. I'm used to this and have been doing it for
years.
However, there's a few issues that keep coming up. A lot of the ports use
/var for data dirs.
Michel Talon wrote:
Rakhesh Sasidharan wrote:
Another (related) question: both gvinum and the geom utilities like
gmirror and gstripe etc provide for RAID0, RAID1, and RAID3. Any
advantages/ disadvantages of using one instead of the other?
There has been a polemic between Greg Lehey and PJ
Yes, I've had good luck with the Promise brand PCI-SATA cards on 6.x. We are
using this method to evolve older machines to SATA.
Thanks for the hint. Would you tell me why did you choose Promise
brand as it's expensive compared to the other brands?
Bahman
Hi all,
I'm running FreeBSD 6.2.
Thank you all! Very surprising! I didn't know that.
Bahman
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
Hi,
I built it by doing:
cd /usr/ports/net/isc-dhcp3-server make install
the version = isc-dhcp3-server-3.0.5_2 for both, could their be code changes
if the _2 did not change?
There should not be any change BUT... I imagine the aplied patches
could be different depending on FreeBSD
On Wed, 22 Aug 2007, Chris wrote:
On 20/08/07, Ian Smith [EMAIL PROTECTED] wrote:
Sorry for the repeat post folks, but I goofed last time, leaving out the
subject line while replying to the digest. Still curious .. Ian
===
On Sat, 18 Aug 2007 21:32:28 +0200 Erik Trulsson
How can I upgrate source code to 7.0-CURRENT with cvsup?
Currently I'm using 6.2p5.
Btw could anyone post here your cvsup-file to update your source code to
7.0 CURRENT?
Tnx you very much
___
freebsd-questions@freebsd.org mailing list
Please read the sample cvsup-file (in /usr/share). A detail
instruction is already there in that sample file.
On 8/23/07, Truong Minh Hanh - FPT Software [EMAIL PROTECTED] wrote:
How can I upgrate source code to 7.0-CURRENT with cvsup?
Currently I'm using 6.2p5.
Btw could anyone post here
On 8/23/07, Chuck Swiger [EMAIL PROTECTED] wrote:
On Aug 22, 2007, at 2:34 AM, Nguyen Tam Chinh wrote:
Please advice how to debug this overload problem.
Thank you very much!
--
%top
last pid: 12901; load averages: 8.68, 8.65, 8.65up 1
+20:44:06
On Wednesday 22 August 2007, Truong Minh Hanh - FPT Software said:
How can I upgrate source code to 7.0-CURRENT with cvsup?
Currently I'm using 6.2p5.
Btw could anyone post here your cvsup-file to update your source
code to 7.0 CURRENT?
Tnx you very much
*default tag=.
*default
On Thu, August 23, 2007 07:19, Truong Minh Hanh - FPT Software wrote:
How can I upgrate source code to 7.0-CURRENT with cvsup?
Currently I'm using 6.2p5.
Btw could anyone post here your cvsup-file to update your source code to
7.0 CURRENT?
Tnx you very much
On 8/23/07, Martin Tournoij [EMAIL PROTECTED] wrote:
On Thu, August 23, 2007 07:19, Truong Minh Hanh - FPT Software wrote:
How can I upgrate source code to 7.0-CURRENT with cvsup?
Currently I'm using 6.2p5.
Btw could anyone post here your cvsup-file to update your source code to
7.0
93 matches
Mail list logo
