[Ted Mittelstaedt's words, heavily edited for brevity. Ted, please shout if I
haven't caught the sense of what you're saying]
Well, I know it's been a week since this came up but I'll toss in my
$0.02 here. I've been against this project since I heard about it.
Fortunately, it appears to be
On Sun, Nov 18, 2007 at 10:12:04PM -0800, Viktor Penkov wrote:
Hello.I want to install flash and using it with firefox.I used this
guide -
http://freebsdgirl.com/2005/06/freebsd_firefox_flash.html
That guide is almost 3 yrs old. Totally useless.
When i rebooted my system i got this message
Hi Viktor,
Looking at that page, you don't need to mount your partitions. You
should be able to edit /etc/libmap.conf directly.
Apologies for the error.
--
Frank
Contact info: http://www.esperance-linux.co.uk/misc/contact.html
___
Hi there
I have a 600mhz PIII computer with an older BIOS that will not recognize
my 160GB new HD that I installed for use with FreeBSD.
I can install FBSD if I limit the drive to 32GB, but before I settle with
that, is there a way I can access the entire drive ... perhabs by using a
smaller
I have set up a simple unattended installation system for FreeBSD, so
that I can manually configure a group of computers to boot with PXE, and
when they boot they will automatically install FreeBSD.
The final step would be to configure the BIOS to boot from the first
hard drive. So far I can
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Olivier Nicole
Sent: Tuesday, November 13, 2007 6:05 PM
To: freebsd-questions@freebsd.org
Subject: What server for a mail server
Hi,
I have a project where I should set-up a mail server for
i want a link to download the free BSD 6.1 os through http
can u help me in this
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
Get some help before you botch it.
I love Teds replies, classic !!!
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
Hi All,
Does anyone remmeber from ages ago there was a theme
pack tarball knocking about for Fluxbox - must have had
about 20 themes in it, some with backgrounds.
I have Googled about and looked at the ones in ports
but thats not them.
Anyone know where I might find this now such along
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of hari krishna
Sent: 19 November 2007 12:01
To: freebsd-questions@FreeBSD.org
Subject: fromharikrishna
i want a link to download the free BSD 6.1 os through http
can u help me in this
The
On Mon, 19 Nov 2007 02:27:58 -0700 (MST)
Christoper Tucker [EMAIL PROTECTED] wrote:
Hi there
I have a 600mhz PIII computer with an older BIOS that will not
recognize my 160GB new HD that I installed for use with FreeBSD.
I can install FBSD if I limit the drive to 32GB, but before I settle
Is there a reliable way to store ACLs in tar archives? I've tried
to create with tar cpf and extract with tar xpf with no luck.
Only flags are extracted correctly. Should I use another format
(I've tried pax as per default and ustar)? Is it possible at all?
I'll be glad to hear about any solution
In response to Dinesh Nair [EMAIL PROTECTED]:
On Sun, 18 Nov 2007 12:29:32 +0200, Manolis Kiagias wrote:
Wojciech Puchar wrote:
i have machune with intel's CPU with hyperthreading.
it is detected right, but only first thread is ever used.
top shows at least 50% idle no matter
Hi, All.
Dell Inspiron 1300, BIOS revision A10
Then I try to boot from ntloader, I got this messages:
Invalid slice
Invalid slice
No /boot/loader
FreeBSD/i386 boot
Default: 0:ad(0,a)/boot/kernel/kernel
boot:
Invalid slice
No /boot/kernel/kernel
FreeBSD/i386 boot
Default:
Andrew Pantyukhin wrote:
On Fri, Nov 16, 2007 at 12:48:52PM -0500, Steve Bertrand wrote:
Does anyone know of a way to configure WCCP redirect support into a
FreeBSD based router without having to install squid?
I've only used FreeBSD as a WCCPv1/v2 sink (receiver), but you
can try sending
On Mon, Nov 19, 2007 at 08:58:34AM -0500, Steve Bertrand wrote:
Andrew Pantyukhin wrote:
On Fri, Nov 16, 2007 at 12:48:52PM -0500, Steve Bertrand wrote:
Does anyone know of a way to configure WCCP redirect support into a
FreeBSD based router without having to install squid?
I've only
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Due to an error I made the following file
- -rw-r--r-- 1 jos jos0 Nov 19 15:34 -
- -rw-r--r-- 1 jos jos 767 Nov 19 15:39 .cshrc
drwx-- 3 jos jos 512 Nov 19 15:40 .imap
How to delete the - file
rm - doesnot work (even with
Jack Raats writes:
- -rw-r--r-- 1 jos jos0 Nov 19 15:34 -
- -rw-r--r-- 1 jos jos 767 Nov 19 15:39 .cshrc
drwx-- 3 jos jos 512 Nov 19 15:40 .imap
How to delete the - file
rm - doesnot work (even with root access)
man rm, section NOTES
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Jack Raats
Due to an error I made the following file
- -rw-r--r-- 1 jos jos0 Nov 19 15:34 -
- -rw-r--r-- 1 jos jos 767 Nov 19 15:39 .cshrc
drwx-- 3 jos jos 512 Nov 19 15:40
ipfw forwarding is a very easy way to redirect traffic without
changing it. PF has similar functionality. It all depends on what
the appliance supports. If wccp is the only way it can eat
packets, try playing with gre(4). But maybe it'll consume just
plain packets with wrong IP destinations
On Mon, 19 Nov 2007 17:30:58 +0530, hari krishna
[EMAIL PROTECTED] wrote:
i want a link to download the free BSD 6.1 os through http
can u help me in this
Check the handbook for a list of mirrors
(http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/).
Also, I'd suggest you always try
- -rw-r--r-- 1 jos jos0 Nov 19 15:34 -
- -rw-r--r-- 1 jos jos 767 Nov 19 15:39 .cshrc
drwx-- 3 jos jos 512 Nov 19 15:40 .imap
How to delete the - file
rm - doesnot work (even with root access)
rm -- -
will work. everything after -- is forced to be used as
On Mon, Nov 19, 2007 at 10:10:43AM -0500, Steve Bertrand wrote:
ipfw forwarding is a very easy way to redirect traffic without
changing it. PF has similar functionality. It all depends on what
the appliance supports. If wccp is the only way it can eat
packets, try playing with gre(4).
I have a project where I should set-up a mail server for approximately
12000 users, 4000 virtual domains, 15000 messages per day, 700 MB
traffic per day.
200 mails*users/day is safe assumption. maybe 1-2 of them won't be spams
means about 2.5 million mails a day, assume 5 millions because
I am familiar with IPFW, but I'd like to know all options in order to
choose the best one.
I would very much prefer to do this in a way without having to have
Squid running on the box, but will if I have to.
If filtering is all you want, you don't have to set up squid as a
caching proxy.
Hi:
The EMC Networker is supported in freebsd ?
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
On Mon, Nov 19, 2007 at 03:45:14PM +0100, Jack Raats wrote:
Due to an error I made the following file
- -rw-r--r-- 1 jos jos0 Nov 19 15:34 -
- -rw-r--r-- 1 jos jos 767 Nov 19 15:39 .cshrc
drwx-- 3 jos jos 512 Nov 19 15:40 .imap
How to delete the - file
rm -
On Sun, Nov 18, 2007 at 10:40:27AM -0600, Chris wrote:
On Sun, 18 Nov 2007 16:34:56 +
Frank Shute [EMAIL PROTECTED] wrote:
On Sun, Nov 18, 2007 at 09:41:51AM -0600, Chris wrote:
... seems to be going bonkers?!
--
Best regards,
Chris
Your post is a little
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 11/18/07 11:30 PM, Ted Mittelstaedt wrote:
Hi David, apologies to Jerry for jumping in.
Compaq uses several RAID cards most are under the so-called
SmartArray using the ida driver. If this is yours, you can
use a utility called idacontrol
Has anybody had any recent problems exec'ing evo? Say, in
just the past several days? Here is output to the screen when I
involve it from the cmd line:
p0 9:17 tao2 [164] evolution
CalDAV Eplugin starting up ...
Loading Spamassasin as the default junk plugin
**
Hi All,
I have a system where a diskless FreeBSD 6.3 i386 machine boots with pxeboot
from a FreeBSD 6.3 amd64 machine. I have lines in /etc/fstab for the diskless
machine like:
# DeviceMountPoint FsType Options DumpPass
172.16.0.1:/usr /usrnfs rw 0 0
Dear FreeBSD,
I have tried to install 6.2 and 7.1beta onto a new computer. The
installs seem to start up fine, whether via FTP or from an install disc1
CD, but during the loading of the binaries, the installs reliably
encounter a Signal 10 caught! That's bad! or the Checksum fails on
the
Few weeks ago, I installed apache22. Just wanted to put up some
family photos. Whenever I tried to connect, got a apache doesn't
have permisson to acess ~/. on this system or somesuch. The only way
to get around it appeared to be a chmod 777 on my pic folder (no luck
with 775!). Now I restored
Yupp as soon as Beta3 arrived i see problems even getting it to load,
takes 5 minutes to just start it, though i dont know if i can say its
the OS
On Mon, 2007-11-19 at 09:30 -0800, Gary Kline wrote:
Has anybody had any recent problems exec'ing evo? Say, in
just the past several
---
The following files are affected by updates, but no changes have
been downloaded because the files have been modified locally:
/etc/rc.d/jail
---
how could i look at this update manually?
___
freebsd-questions@freebsd.org mailing list
On Mon, November 19, 2007 18:35, Steve Franks wrote:
Few weeks ago, I installed apache22. Just wanted to put up some
family photos. Whenever I tried to connect, got a apache doesn't have
permisson to acess ~/. on this system or somesuch. The only way to get
around it appeared to be a chmod
Steve Franks wrote:
Few weeks ago, I installed apache22. Just wanted to put up some
family photos. Whenever I tried to connect, got a apache doesn't
have permisson to acess ~/. on this system or somesuch. The only way
to get around it appeared to be a chmod 777 on my pic folder (no luck
with
Hi All,
I've many times successfully gone to 7.0 or 8.0 current.
cat EOF /etc/make.conf
NO_ATM=true # do not build ATM related programs and libraries
NO_AUTHPF=true # do not build and install authpf (setuid/gid)
NO_FORTRAN=true # do not build g77 and related libraries
NO_GAMES=true
On Mon, November 19, 2007 18:42, Peter Boosten wrote:
I suppose ~/ is your html_public in your homedir, right?
Make that public_html (it has been a long time since I did something with
userdirs).
Peter
--
http://www.boosten.org
___
On Tue, 2007-11-20 at 01:34 +0800, OutbackDingo wrote:
Yupp as soon as Beta3 arrived i see problems even getting it to load,
takes 5 minutes to just start it, though i dont know if i can say its
the OS
That is *exactly* the same problem I started reporting with Beta 1.5.
I'm thinking I need
On Mon, 2007-11-19 at 18:33 +0100, Laszlo Nagy wrote:
Hi All,
I have a system where a diskless FreeBSD 6.3 i386 machine boots with pxeboot
from a FreeBSD 6.3 amd64 machine. I have lines in /etc/fstab for the diskless
machine like:
# DeviceMountPoint FsType Options Dump
Is there a way to log in from ssh and pop up a program on the local
xterminal? I tried, and got complaints that there was no x, so I
presume they are locked in tty0, which is a good thing, usually...
Steve
___
freebsd-questions@freebsd.org mailing list
On Nov 19, 2007 3:11 PM, Steve Franks [EMAIL PROTECTED] wrote:
Is there a way to log in from ssh and pop up a program on the local
xterminal? I tried, and got complaints that there was no x, so I
presume they are locked in tty0, which is a good thing, usually...
Give a look at -X option of
On Nov 19, 2007 12:39 PM, Wojciech Puchar
[EMAIL PROTECTED] wrote:
---
The following files are affected by updates, but no changes have
been downloaded because the files have been modified locally:
/etc/rc.d/jail
---
how could i look at this update manually?
I believe the security patch
diskless101#mkdir /aaa
mkdir aaa: Read-only file system
Question: if the remount did not succeed, why didn't it throw an error? If
succeeded, why can't I write on the filesystem?
The answer to the second portion is that you're mounted as a read only
file system, so there's no write
On Nov 19, 2007 12:39 PM, Wojciech Puchar
[EMAIL PROTECTED] wrote:
---
The following files are affected by updates, but no changes have
been downloaded because the files have been modified locally:
/etc/rc.d/jail
---
how could i look at this update manually?
Also, check out:
On Nov 19, 2007 5:11 PM, Jerry McAllister [EMAIL PROTECTED] wrote:
On Sun, Nov 18, 2007 at 10:40:27AM -0600, Chris wrote:
On Sun, 18 Nov 2007 16:34:56 +
Frank Shute [EMAIL PROTECTED] wrote:
On Sun, Nov 18, 2007 at 09:41:51AM -0600, Chris wrote:
... seems to be going
On Nov 16, 2007 5:05 PM, Douglas Rodriguez [EMAIL PROTECTED] wrote:
I've been getting the following message repeating continuously:
ad1:FAILURE - READ_DMA status=51READY, DSC, ERROR
error=1ILLEGAL_LENGTH LBA=216026367
g_vfs_done():ad1s1[READ(offset = 110605467648, length =
Hi, All.
I'm add to /sys/boot/i386/boot2/boot2.c
in function dskread(...) some `debug' output
when it search for needle slice in loop if dsk.slice==0
printf(Found %u\n, dp[i].dp_typ);
then FreeBSD loadsup by pressing key F2 in boot0 menu
F1. dos
F2. FreeBSD
\key pres
boot: 0:ad(0,0,a)Found: 7
On Mon, Nov 19, 2007 at 03:55:42AM +0100, n j wrote:
Hello Randy, Roland, Gary,
UPS drivers can shut the system down, but you seemed to have ruled
that out?
The UPS is present, but I never set up and configured anything (no
snmp or any other agents) that would give the UPS the
Saturday,, following the adviice of this group plus things I
found of the web, I put together this list of mods to make to
/boot/loader.con, /etc/rc.conf, and /etc/devfs.conf Still,
after rebooting/doing-hard-resets 5 or 6times, things hung if or
if I
Fernando Apesteguía wrote:
On Nov 19, 2007 5:11 PM, Jerry McAllister [EMAIL PROTECTED] wrote:
On Sun, Nov 18, 2007 at 10:40:27AM -0600, Chris wrote:
On Sun, 18 Nov 2007 16:34:56 +
Frank Shute [EMAIL PROTECTED] wrote:
On Sun, Nov 18, 2007 at 09:41:51AM -0600, Chris wrote:
... seems to
On Mon, Nov 19, 2007 at 11:04:20AM -0800, Gary Kline wrote:
Saturday,, following the adviice of this group plus things I
found of the web, I put together this list of mods to make to
/boot/loader.con, /etc/rc.conf, and /etc/devfs.conf Still,
after
Gary Kline wrote:
On Sat, Nov 17, 2007 at 02:40:18PM -0800, Garrett Cooper wrote:
Even though audio CDs use the ISO-9660 standard, they aren't really
mountable (depends on how you look at the problem, i.e. what OS you use,
and what audio playing app you use).
Specifying the /dev node
Javier Martín Rueda wrote:
I have set up a simple unattended installation system for FreeBSD, so
that I can manually configure a group of computers to boot with PXE,
and when they boot they will automatically install FreeBSD.
The final step would be to configure the BIOS to boot from the first
We have a box doing routing and NAT using IPNAT that freezes up after a couple
days. We have swapped out the Box with a different model and continue to
see the same problem. Symptoms are that the machine no longer passes
traffic and the console is unresponsive to any keyboard input (not
On Mon, 19 Nov 2007, Steve Franks wrote:
Few weeks ago, I installed apache22. Just wanted to put up some
family photos. Whenever I tried to connect, got a apache doesn't
have permisson to acess ~/. on this system or somesuch. The only way
to get around it appeared to be a chmod 777 on my pic
check freebsd site for this.
On Mon, 19 Nov 2007, Paul Urdanivia wrote:
Hi:
The EMC Networker is supported in freebsd ?
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe,
Hello,
I was wondering if there is a port (that I can't seem to find), or one
in the making of Xephyr (Xnest next generation?).
If not... has anyone tried and had any luck with grabbing the sources
from git and building it? Care to comment on pitfalls?
--
Regards,
Eric
signature.asc
Is there a way to log in from ssh and pop up a program on the local
xterminal? I tried, and got complaints that there was no x, so I
you mean local local display (local X server).
simply you have to
export DISPLAY=:0
before running.
must be the same user as logged locally.
Gee, I thought that this had gone away. PLEASE send this off to
FreeBSD-chat, it has no business on FreeBSD-questions whatever.
Jonathan McKeown wrote:
[Ted Mittelstaedt's words, heavily edited for brevity. Ted, please shout if I
haven't caught the sense of what you're saying]
On Nov 19, 2007 8:31 PM, [LoN]Kamikaze [EMAIL PROTECTED] wrote:
Fernando Apesteguía wrote:
On Nov 19, 2007 5:11 PM, Jerry McAllister [EMAIL PROTECTED] wrote:
On Sun, Nov 18, 2007 at 10:40:27AM -0600, Chris wrote:
On Sun, 18 Nov 2007 16:34:56 +
Frank Shute [EMAIL PROTECTED] wrote:
Hello Everyone,
I'm trying to get an old 3Com 3c515-TX Fast Ethernet ISA Card to
work with FreeBSD 7.0-BETA3. So far, the only operating systems I can
use this card on are OpenBSD, NetBSD, Linux, and (ugh) Windows.
Is there a way to port the OpenBSD (or NetBSD) driver to FreeBSD so
we can
On Mon, 19 Nov 2007, James Shaw wrote:
I'm trying to get an old 3Com 3c515-TX Fast Ethernet ISA Card to
work with FreeBSD 7.0-BETA3. So far, the only operating systems I can
use this card on are OpenBSD, NetBSD, Linux, and (ugh) Windows.
Is there a way to port the OpenBSD (or NetBSD) driver
On Mon, 2007-11-19 at 15:45 +0100, Jack Raats wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Due to an error I made the following file
- -rw-r--r-- 1 jos jos0 Nov 19 15:34 -
- -rw-r--r-- 1 jos jos 767 Nov 19 15:39 .cshrc
drwx-- 3 jos jos 512 Nov 19 15:40 .imap
On Mon, Nov 19, 2007 at 08:35:15PM +0100, Roland Smith wrote:
On Mon, Nov 19, 2007 at 11:04:20AM -0800, Gary Kline wrote:
Saturday,, following the adviice of this group plus things I
found of the web, I put together this list of mods to make to
/boot/loader.con, /etc/rc.conf,
Hi:
I got a VIA EPIA-EK board which has some advanced settings for graphics,
you can toggle how much shared memory to allocate for graphics. Nice,
but my device won't have a display so I'd like not to allocate any.
There is an option for disabling shared memory, but then the system
won't
3. The issues with nvidia kernel module on amd64 (alternativelly
does anyone know how hard it would be to get bettern 1024x768 with nv?)
I used to be able to get nv to do 1280x1024, with my 6600LE
graphics card. I could never convince it to do 1600x1200, the
native resolution of my LCD
All,
I'm of the realization that FreeBSD is a volunteer project, but there's a
recent issue I've hit, and I've contacted nearly EVERYONE I can think of
about it to try and fix, and the response I've gotten has been a deafening
silence.
I'm having trouble building apache2.2.6, it relates I
Hi there,
I'm wondering if the FreeBSD 6.2 Production Release ISO images get
updated periodically when there are important patches, or is it better
to download the latest snapshot to save the trouble of updating
everything after installing?
Patrick
___
This may help:
http://lists.freebsd.org/pipermail/freebsd-stable/2004-December/010425.h
tml
Cheers,
Brent
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Dan Mahoney,
System Admin
Sent: Tuesday, 20 November 2007 1:20 p.m.
To: [EMAIL PROTECTED]
On Mon, Nov 19, 2007 at 07:19:34PM -0500, Dan Mahoney, System Admin wrote:
All,
I'm of the realization that FreeBSD is a volunteer project, but there's a
recent issue I've hit, and I've contacted nearly EVERYONE I can think of
about it to try and fix, and the response I've gotten has been
I just upgraded my system, with 7.0-BETA2 CD.
After this I updated the sources from CVS and tried to make buildworld.
But I am getting the following compilation error.
What may be wrong?
Seems like some incompatibility between asembler and compiler?
Yuri
../../../crypto/openssl/crypto
On Mon, 19 Nov 2007, Jerry McAllister wrote:
On Mon, Nov 19, 2007 at 07:19:34PM -0500, Dan Mahoney, System Admin wrote:
All,
I'm of the realization that FreeBSD is a volunteer project, but there's a
recent issue I've hit, and I've contacted nearly EVERYONE I can think of
about it to try and
On Tuesday 20 November 2007 06:24:36 Yuri wrote:
I just upgraded my system, with 7.0-BETA2 CD.
After this I updated the sources from CVS and tried to make
buildworld. But I am getting the following compilation error.
What may be wrong?
Seems like some incompatibility between asembler and
I'm wondering if the FreeBSD 6.2 Production Release ISO images get
updated periodically when there are important patches, or is it better
to download the latest snapshot to save the trouble of updating
everything after installing?
No, the ISOs remain the same as when the release happens. You
On Mon, 19 Nov 2007, Jerry McAllister wrote:
You can tell ports where to install something. We used to install
all of Apache in its own directory to make it easy to manipulate
in a system we were installing in a lot of places. Check the ports
doc and such.
Actually, I just tried this.
I was attempting to do an NFS mount from a FreeBSD server to a FreeBSD
client over IPv6 and received the error NFSPROC_NULL: RPC: Timed out.
After doing a packet trace, I noticed that the FreeBSD server was
indeed responding to both a Portmap GATADDR call and a NFS NULL call,
but in both cases it
More like incompatibility with your CFLAGS. Are you using CFLAGS with no
optimizations (can't guess from pasted log)?
I didn't specify any special CFLAGS. And my /etc/make.conf is empty.
Yuri
___
freebsd-questions@freebsd.org mailing list
Your mail to 'Core' with the subject
Is being held until the list moderator can review it for approval.
The reason it is being held:
Post by non-member to a members-only list
Either the message will get posted to the list, or you will receive
notification of the moderator's decision.
On 10:47:37 Nov 19, Steve Bertrand wrote:
Essentially, I simply need a method to redirect layer 3/4 traffic
destined for anything:80 from the router to the appliance.
I've got a few options now, so I'll be testing all of them in the coming
days.
Including this one?
rdr all port 80 to
Hello,
I have the same problem and you need to add this options in your
kernel options file:
device crypto
device cryptodev
device enc
For me, now everything it's ok.
Sébastien.
Yuri Pankov [EMAIL PROTECTED] a écrit :
On Tuesday 20 November 2007 06:24:36 Yuri wrote:
I
--- security [EMAIL PROTECTED] wrote:
Its me, kev. Sorry, I misunderstood the request. I
redid the test on a separate computer and it didnt
broadcast the dhcprequest.
The router's log shows no dhcp activities.
I tried by passing the router and using my isp's
dhcp
server but
On Tuesday 20 November 2007 06:40:53 Yuri wrote:
More like incompatibility with your CFLAGS. Are you using CFLAGS
with no optimizations (can't guess from pasted log)?
I didn't specify any special CFLAGS. And my /etc/make.conf is empty.
Yuri
What about /etc/src.conf and more complete build
Running several FreeBSD 7.0-BETA2/3 boxes with OpenLDAP 2.3.39-backend
drove me into a problem:
No local user is capable of neither changing his password nor shell or
GECOS although this is allowed by users to do in LDAP ACLs.
Looking for a solution in mailing lists I found only one - patching
Hello,
I'm trying to update my ports and need to still port_upgrade kdevelop but
during the
upgrade fails with the following error
checking for Berkeley DB = 4.1... configure: error: no - please install
Berkeley DB = 4.1
=== Script configure failed unexpectedly.
Please report the problem to
What about /etc/src.conf and more complete build log (at least whole
compiler line)?
I don't have /etc/src.conf file. Please see last few build commands below.
Versions of relevant commands:
cc (GCC) 4.2.1 20070719 [FreeBSD]
GNU assembler 2.15 [FreeBSD] 2004-05-23
Yuri
cc -fpic -DPIC
When 6.0 was in BETA kernel had many options like WITNESS/INVARIANTS. User-land
also has some special options. Those options made FreeBSD-BETA much slower.
Are any similar options on now in 7.0-BETA2? What is the complete list?
I can only find an option makeoptions DEBUG=-g in
=== apache-worker-2.2.6_2 depends on file:
/usr/local/bin/autoconf-2.61 - not found
===Verifying install for /usr/local/bin/autoconf-2.61 in
/usr/ports/devel/autoconf261
=== Returning to build of apache-worker-2.2.6_2
...
buildconf: checking installation...
buildconf: autoconf not
On Tuesday 20 November 2007 09:30:40 Yuri wrote:
What about /etc/src.conf and more complete build log (at least
whole compiler line)?
I don't have /etc/src.conf file. Please see last few build commands
below.
Versions of relevant commands:
cc (GCC) 4.2.1 20070719 [FreeBSD]
GNU
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Who do I report the following issue to (it falls into at least 3 camps)?
If I am downloading a torrent in deluge 0.5.6.2_1 *AND* am logged into
gmail (*WITH* a chat open) my network connection looses about 90% of
it's capacity (for all applications),
--On November 19, 2007 11:00:44 PM -0500 Dan Mahoney, System Admin
[EMAIL PROTECTED] wrote:
On Mon, 19 Nov 2007, Jerry McAllister wrote:
You can tell ports where to install something. We used to install
all of Apache in its own directory to make it easy to manipulate
in a system we were
--On November 19, 2007 10:17:18 PM -0500 Dan Mahoney, System Admin
[EMAIL PROTECTED] wrote:
*headdesk, repeatedly*
Apache2 is a complete piece of crap. Portable Runtime my ass. Was
there something so wrong with APACI? Apache1.3 built out of the box on
every system in the world.
I
93 matches
Mail list logo
