system.
My son helped me set up the xwindows (KDE) on this system. It has worked OK
what is xwindows?
for quite a while and then yesterday I was trying to install a printer.
Evidently I messed something up and now I get the following:
hostname: not found
dd: not found
deleted too much?
first of all, you used that bad letter. Just call it X. Never add an s at the
end of the other word. Some people are real allergic to this.
no allergic, just matter of proper naming. X Window System is not a kind
of windows.
KDE is not a kind of X Window System too..
Robert Falanga wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA256
Righard van Roy wrote:
Hello,
I was planning stepping over from Linux to BSD. I trying to install FreeBSD
using the minimal boot cd over FTP. In the installation menu I select that I
do not wish to use IPv6, and that I do wish to use DHCP. I
Hello,
I was planning stepping over from Linux to BSD. I trying to install FreeBSD
using the minimal boot cd over FTP. In the installation menu I select that I
do not wish to use IPv6, and that I do wish to use DHCP. I sure I have
selected the correct Network card. Although after this my DHCP
Date: Sun, 17 Feb 2008 12:02:36 +0200
From: [EMAIL PROTECTED]
To: freebsd-questions@freebsd.org
Subject: FTP installation problem.
Hello,
I was planning stepping over from Linux to BSD. I trying to install FreeBSD
using the minimal boot cd over
Should newfs_msdos be able to work on whole cdX/acdX device ?
[ufs/ffs] newfs can do it.
But with newfs_msdos I had to run disklabel first and then I could
create a filesystem on cdXa, but I couldn't do it on the whole disk.
--
Andriy Gapon
___
Wojciech Puchar wrote:
first of all, you used that bad letter. Just call it X. Never add an s
at the end of the other word. Some people are real allergic to this.
no allergic, just matter of proper naming. X Window System is not a kind
of windows.
KDE is not a kind of X Window System too..
Hi
when i add into /etc/rc.conf line
gdm_enable=YES (freebsd6.3)
and my system start I see line
Unkown username haldaemon in message bus configuration file.
I think that's little problem (for newbies big problem)
because I have to myself add haldaemon user (I did it accidentally and
it's now
Hello,
For the past few days, I've been migrating a bunch of apache-1.3.41
vhosts to apache-2.2.8 (on the same machine, 6.3-RELEASE i386). Many of
directories are protected with AuthType directives and I want to reuse the
existing .dat files.
After working successfully for more than a day
On Sat, 2008-02-16 at 12:04 -0500, Bill Moran wrote:
James [EMAIL PROTECTED] wrote:
On Sat, 2008-02-16 at 09:11 +0100, Lubomir Matousek wrote:
Dear list,
I have the following problem when using rmuser (freebsd 6.2)
--
rmuser -v hana
Hi,
Alphons Fonz van Werven wrote:
Wojciech Puchar wrote:
first of all, you used that bad letter. Just call it X. Never add an
s at the end of the other word. Some people are real allergic to this.
no allergic, just matter of proper naming. X Window System is not a
kind of windows.
KDE
On Sat, 2008-02-16 at 10:41 -0700, Andrew Falanga wrote:
HI,
On my father's computer there isn't an IPv4 loopback address being assigned
to
the lo0 interface. What would cause this? I've looked at his configs and
they're the same as on my system (obviously something is different, but
On Sun, Feb 17, 2008 at 07:23:17AM -0600, Doug Poland wrote:
Hello,
You're likely suffering from this:
http://www.freebsd.org/cgi/query-pr.cgi?pr=119711
There were some recent changes to www/apache22 which specifically
addressed the above:
On Sat, Feb 16, 2008 at 10:17:49PM -0500, Robert Falanga wrote:
First let me say that I am quite new at freebsd or any other unix type
system.
My son helped me set up the xwindows (KDE) on this system. It has worked
OK for quite a while and then yesterday I was trying to install a
Command line programs for php seem to segfault on a 7.0RC1 box (yes, I
know, I should update to RC2) - for example:
[EMAIL PROTECTED](~/bin)$ php -v
PHP 5.2.5 with Suhosin-Patch 0.9.6.2 (cli) (built: Feb 9 2008 13:03:20)
Copyright (c) 1997-2007 The PHP Group
Zend Engine v2.2.0, Copyright (c)
Hi list,
a friend visited my place yesterday bringing his HP netserver LH3 with
him, 3 9GB's scsi discs in it. Dual pentium II 450. 512 RAM. No hardware
raid though.
Given the fact 7.0 is near including ZFS. Given the fact, as I understand,
freebsd can boot of ZFS I wanna make raid1 on/with
Hi list,
I'm trying to install a FreeBSD system on a remote server I can only
access via a serial console with 57600 baud.
There is a Linux rescue system that I use for copying a FreeBSD HDD
image via dd to the harddisk.
To access the FreeBSD installation via remote serial console I've done
the
Erich Dollansky wrote:
Just check his original post, you might can help him.
Actually, I've read the post. But just like the person who's trying to help
now, I can only guess because I don't use KDE and don't know much about it.
I just found it kinda disturbing how some people were being
Trying to upgrade my FreeBSD-6.1-R to 6.3-R, I followed the schema
of Colin Percival at FreeBSD site. The matter is that when I type sh
freebsd-update.sh -f freebsd-update.conf -r 6.3-RELEASE upgrade, as
root I got freebsd-update.sh: Directory does not exist or it is not
writable:
On Sun, 17 Feb 2008, [EMAIL PROTECTED] wrote:
Trying to upgrade my FreeBSD-6.1-R to 6.3-R, I followed the schema
of Colin Percival at FreeBSD site. The matter is that when I type sh
freebsd-update.sh -f freebsd-update.conf -r 6.3-RELEASE upgrade, as
root I got freebsd-update.sh:
On Sun, February 17, 2008 08:19, Jeremy Chadwick wrote:
On Sun, Feb 17, 2008 at 07:23:17AM -0600, Doug Poland wrote:
Hello,
You're likely suffering from this:
http://www.freebsd.org/cgi/query-pr.cgi?pr=119711
There were some recent changes to www/apache22 which specifically
addressed the
Hello to all.
I'm not sure whether to have posted this here or on a VMware list; apologies if
I'm in
the wrong place.
The other day, I did a fresh install of v. 7RC2 from the minimal CD on a CentOS
5.1 box
running VMware server 1.0.4. I had previously successfully installed v. 6.2,
and
As part of our disaster recovery planning, I'm working up a bare-metal
recovery sequence that can be followed by someone who's used Linux (easier to
find here than a FreeBSD admin).
My initial outline sequence was along the lines of:
Boot install CD and choose Fixit
fdisk -BI
extract saved
Wojciech Puchar wrote:
Boot install CD and choose Fixit
get live CD, it's better for this.
fdisk -BI
extract saved disklabel from tape and install with bsdlabel
Initialise filesystems using stored output of dumpfs -m (from tape)
Restore filesystems from tape
good you have such i plan.
Boot install CD and choose Fixit
get live CD, it's better for this.
fdisk -BI
extract saved disklabel from tape and install with bsdlabel
Initialise filesystems using stored output of dumpfs -m (from tape)
Restore filesystems from tape
good you have such i plan. this is rare case today;)
Hi,
On Feb 16, 2008 6:41 PM, Andrew Falanga [EMAIL PROTECTED] wrote:
HI,
On my father's computer there isn't an IPv4 loopback address being assigned to
the lo0 interface. What would cause this? I've looked at his configs and
they're the same as on my system (obviously something is
I'm getting xdm on the other remote machine, I'm running gnome and
that's what I want to get? I see an option for desktop on the Xvnc
manpage but how do I find out the name of my desktop?
___
freebsd-questions@freebsd.org mailing list
On Sun, 2008-02-17 at 22:53 +0200, Deian Popov wrote:
I have tested numerous times both 6.3 and
7 and the ata driver would not detect my hdd. Here is output of dmesg
on 6.2system:
File a bug for sure!
Here are the relevant lines from the working 6.2 system:
atapci0: Intel ICH5 SATA150
During my struggle to get my machine up and running without loosing
files/settings I made the stupid mistake to rebuild kernel twice without
rebooting, which completely made my system unbootable, and couldn't go to
loader prompt to boot kernel.old. I have tested numerous times both 6.3 and
7 and
On Sunday 17 February 2008 21:51, Wojciech Puchar wrote:
Boot install CD and choose Fixit
get live CD, it's better for this.
To be honest, if I'm not using an install CD (which will do the job) I may as
well look at making a custom recovery disk which just needs to be booted -
but see
I will most definitely do, but this would happen after few days (don't have
time to fix the system before that). The output of 6.3 and 7 is the same, so
I will provide one from 6.3. Should I use
http://www.freebsd.org/send-pr.html to file the report ?
On Feb 17, 2008 11:09 PM, Brian A. Seklecki
Is it possible to recover a audio CD with a corrupt TOC (table of
contents) with cdparanoia? I have a little proprietary window app that
does this, but in my quest for open source solutions, I was wondering if
cdparanoia could handle this job.
Any ideas?
Thanks,
Chris
is slice actually created?
Yes.
so it's all right. just ignore it.
as far as i remember i've got this message with bsdlabel -B, but i ignored
it as everything worked fine.
I'd still rather there wasn't an ``error'' message at all unless there's a
genuine error: I'm planning for the case
On Sun, 2008-02-17 at 23:45 +0200, Deian Popov wrote:
I will most definitely do, but this would happen after few days (don't
have time to fix the system before that). The output of 6.3 and 7 is
the same, so I will provide one from 6.3. Should I use
http://www.freebsd.org/send-pr.html to file
Doug C wrote:
I am trying to build FreeBSD 5.5 or 6.3 to run on a board that uses the DMP
Vortex86sx SOC. This chip looks like a 486sx, no FPU. Is there a way to make
a build that uses software emulation for the FPU, like the old days? I do
not see anything in the .cong file that helps. I am
I am trying to build FreeBSD 5.5 or 6.3 to run on a board that uses the DMP
Vortex86sx SOC. This chip looks like a 486sx, no FPU. Is there a way to make
a build that uses software emulation for the FPU, like the old days? I do
not see anything in the .cong file that helps. I am trying to end up
Jon Theil Nielsen wrote:
I have googled for a very long time, but I haven't found any useful
howto on this issue. Well, there is
http://www.cultdeadsheep.org/FreeBSD/docs/Quick_and_dirty_FreeBSD_5_x_and_nss_ldap_mini-HOWTO.html
but that seems to be a bit confusing an not up-to-date. I guess it
Hi,
you might look for older version which have had support for a plain 386.
4.x and maybe 5.2 still have had it.
Erich
Doug C wrote:
I am trying to build FreeBSD 5.5 or 6.3 to run on a board that uses the DMP
Vortex86sx SOC. This chip looks like a 486sx, no FPU. Is there a way to make
a
On Sun, Feb 17, 2008 at 05:45:33PM -0500, Darek M. wrote:
Jon Theil Nielsen wrote:
I have googled for a very long time, but I haven't found any useful
howto on this issue. Well, there is
http://www.cultdeadsheep.org/FreeBSD/docs/Quick_and_dirty_FreeBSD_5_x_and_nss_ldap_mini-HOWTO.html
but
I've brought this up before, I know, but I need a caldav server that will work
with evolution. I've checked out Darwin Calendar Server, but they are not going
to solve an issue (as of 2006) that means evolution can't use it, and evolution
won't budge either- so a mexican stand-off and I'm
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Matthias Kellermann wrote:
| Hi list,
|
| I'm trying to install a FreeBSD system on a remote server I can only
| access via a serial console with 57600 baud.
|
| There is a Linux rescue system that I use for copying a FreeBSD HDD
| image via dd to
On Mon, Feb 18, 2008 at 02:21:44AM +, Da Rock wrote:
I've brought this up before, I know, but I need a caldav server that will
work with evolution. I've checked out Darwin Calendar Server, but they are
not going to solve an issue (as of 2006) that means evolution can't use it,
and
Hello I'm running FreeBSD and gnome and when I noticed that when I try
to run System-administration-Network, Services, Shared Folders, Time
and Date or User and Groups I get this error window:
The configuration could not be loaded
You are not allowed to access the system configuration.
If I
On Sunday 17 February 2008 01:06:28 pm Dimitri Yioulos wrote:
I'm not sure whether to have posted this here or on a VMware list;
apologies if I'm in the wrong place.
The other day, I did a fresh install of v. 7RC2 from the minimal CD on
a CentOS 5.1 box running VMware server 1.0.4. I had
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Drew Sanford wrote:
| Command line programs for php seem to segfault on a 7.0RC1 box (yes, I
| know, I should update to RC2) - for example:
|
| [EMAIL PROTECTED](~/bin)$ php -v
| PHP 5.2.5 with Suhosin-Patch 0.9.6.2 (cli) (built: Feb 9 2008
People: i have a strange issue with named services in my freeBSD-6.2-Release Box
(I have installed the OS from the ISO image from which I installed another box
there named is running fine , but unfortunately in this box its not running ),
I can't trace it what went wrong ?
Named is not
I'm trying to mount an ext2fs image (in a file), following sec.
17.13.2 of the Handbook and the mdconfig(8) manpage. Since I don't
want to change the image, just examine it, I specified -o readonly
to mdconfig and the equivalent to mount. Is there some reason why
this should not work? The
47 matches
Mail list logo
