On June 8, 2009, Daniel Underwood wrote:
Further suppose that after running the command, I decide I want to
save the output to a text file, so I can analyze the results outside
of the terminal. What can I do? Well, I can do a traditional
copy-and-paste, or I could re-enter the previous
We have three SuperMicro blade servers. One's worked like a champ, and
the other two died. The vendor we used tanked, so no warranty support.
I got two IBM X3400 boxes to replace the SuperMicros; the drives were
OK, so I got empty enclosures plus some rails, stuffed the drives in, and
What UFS-like filesystem has unlimited inodes, but is a drop-in
replacement for ext3, and is fairly easy to configure?
Is UFS2 no longer considered the best general-use filesystem?
at least for be it's the best. High performance, minimal hardware resource
usage, perfect recovery from
At this point you're sort of out of the general-use category :) You want
ZFS. Or rather, you don't want to try and fsck a UFS filesystem with 200M
inodes. The three drawbacks I can think of to ZFS are it's hard to boot
ZFS is very trendy now, but isn't it allocating space in 4KB chunks?
On Mon, Jun 08, 2009 at 05:17:29PM -0400, Daniel Underwood wrote:
I'm looking for a way to manage my personal collection of research
articles. Ideally I'd like some way to keep records on authors,
keywords, journals, and publication years of articles (PDF files)
downloaded onto my local
On Monday 08 June 2009 17:37:14 Jerry McAllister wrote:
On Mon, Jun 08, 2009 at 06:31:57PM +0400, Peter Andreev wrote:
may be this solution will help you:
[snip]
* * 31 1/2 *
* * 30 4/2 *
* * 28 2 *
This isn't right, surely? It goes wrong in August and stays wrong for the rest
of the
yes, you're right, thank you/ the right version will be:
* * 31 1,3,5,7,8,10,12 *
* * 30 4,6,9,11 *
* * 28,29 2 *
2009/6/9 Jonathan McKeown j.mcke...@ru.ac.za
On Monday 08 June 2009 17:37:14 Jerry McAllister wrote:
On Mon, Jun 08, 2009 at 06:31:57PM +0400, Peter Andreev wrote:
may be this
On Tue, Jun 09, 2009 at 08:43:08AM +0200, Wojciech Puchar typed:
Buy second hand branded hardware from ebay (allegro in poland). It's
usually hardware that was used in offices and replaced by more modern
ones. It's already tested!!!
You could get high-end PIII with 512MB RAM for $30 at
Dan Nelson wrote:
In the last episode (Jun 08), Kelly Jones said:
What UFS-like filesystem has unlimited inodes, but is a drop-in
replacement for ext3, and is fairly easy to configure?
Is UFS2 no longer considered the best general-use filesystem?
Reason I ask: I'm going to create many small
Hiya all
I am trying to compile 7.2 on a box currently running 7.1 which was
compiled from 7.0 (in fact way back to 5.2.1)
make buildworld
and
make kernel-toolchain
both produce this error
mkdep -f .depend -a-I/usr/obj/usr/src/tmp/legacy/usr/include
config.c
Hi,
On linux I can change ring parameters like:
/sbin/ethtool -G eth1 rx 4096
-G --set-ring
change the rx/tx ring parameters of the specified ethernet device.
how can I do that in FreeBSD so I can get a better performance from my interface
Regards.
On Mon, Jun 08, 2009 at 01:58:57PM -0400, Chuck Robey typed:
Lars Eighner wrote:
I have some sources which may or may not exist. My target should be
rebuilt
if a source exists that is younger than the target. But sources that do
not exist should be ignored and make should not be
On Mon, 8 Jun 2009 22:37:01 -0400 (EDT), vogelke+u...@pobox.com (Karl Vogel)
wrote:
Are these PDF files generated by scanning journal pages, or do they
contain text? If the latter, you could use something like xapian or
hyperestraier to make a full-text index of your files.
On a
On Mon, 8 Jun 2009 23:11:50 -0400, Daniel Underwood djuatde...@gmail.com
wrote:
Since all the PDFs contain text (none are scanned images), can I
simply use some command like grep to search for text within the
collection? If so, how would I do this? Can grep read text from
within PDFs?
I
man em
hw.em.rxd
Number of receive descriptors allocated by the driver. The
default value is 256. The 82542 and 82543-based adapters can
handle up to 256 descriptors, while others can have up to
4096.
hw.em.txd
Number of transmit
Or store your data in a RDBMS rather than in the filesystem.
sounds like the best solution.
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to
task that even Pentium 100 will do.
I'm hosting websites on 5-10 years old SUN hardware. V100/120 with ultrasparc II
400-650 Mhz. Just put in some new disks and memory, no sweat. They allmost
normal. 400MHz SUNs are available here for 100$ or less. they usually have
quite a lot of RAM even
so people do not be afraid to think outside the the box
Finally, out of my experience with Linux and FreeBSD is that once a
setup is working, it stays working, sometimes the initial setup takes
longer , I ll be honest, there have been times when I spent days
trying to get something working on
I use portmaster. What shall I use instead of pkg_which?
PORTUPGRADE_CMD?= ${LOCALBASE}/sbin/portmaster
^ changed to portmaster
PKG_WHICH_CMD?=${LOCALBASE}/sbin/pkg_which
^ this I
Hi guys,
I just installed spamassassin and dcc form ports. It seems to be working, no
errors from spamassassin --lint. Later I found out there are no any DCC header
in a mail.
local.cf
bayes_file_mode 0770
dns_available yes
razor_config /var/spool/spamd/.razor/razor-agent.conf
add_header all
Hi Mel,
Thanks for responding.
In 200906081647.15069.mel.flynn+fbsd.questi...@mailing.thruhere.net, Mel
Flynn wrote:
[...]
Nothing points to the sound module specifically. The first trace is unusable
(frames missing) and the second trace panics in sleep, which maybe points to
the sound
On Monday 08 June 2009 03:05:20 pm Stefan Miklosovic wrote:
title says it, i downloaded mp4 file by youtube-dl,
but it downloaded video and audio as well. I would
like to separate audio from that file.
i try to find some port in /usr/ports/audio but nothing
reasonable occudred.
For things
Le 8 juin 09 à 23:20, Polytropon a écrit :
On Mon, 8 Jun 2009 22:12:17 +0200, Roland Smith rsm...@xs4all.nl
wrote:
On Sun, Jun 07, 2009 at 11:52:17PM -0500, Lars Eighner wrote:
What I need most is to find (a) make tutorial(s) that do not
suppose make is
being used for compling c/c++
Le 8 juin 09 à 23:17, Daniel Underwood a écrit :
I'm looking for a way to manage my personal collection of research
articles. Ideally I'd like some way to keep records on authors,
keywords, journals, and publication years of articles (PDF files)
downloaded onto my local drive.
Hi Daniel,
I
Le 7 juin 09 à 06:48, Daniel Underwood a écrit :
Installed texlive from ISO, and it all works perfectly now. Thanks
folks!
However, you may realize that ports installing LaTeX style files (or
other things) usually do it in a directory that TeXlive is not aware
of. You have to play a bit
On Sunday 07 June 2009 20:40:44 David M. Patronis wrote:
I suspect, unlike cdrecord and
growisofs, that burncd is no longer a modern utility, and is in serious
need of an overhaul.
And sos@ retired :/
--
Mel
___
freebsd-questions@freebsd.org mailing
On Sunday 07 June 2009 13:42:36 Dave wrote:
I'm trying to get dhcp and dns going ddns on FreeBSD 7.2. In my
dhcpd.leases file i see the forward and reverse information given on the
lease. A host fqdn and a host IP address both return correct dns
information on this host. My issue is if
On 6/9/09, Ashish SHUKLA wahjava...@gmail.com wrote:
Hi Mel,
Thanks for responding.
In 200906081647.15069.mel.flynn+fbsd.questi...@mailing.thruhere.net, Mel
Flynn wrote:
[...]
Nothing points to the sound module specifically. The first trace is
unusable
(frames missing) and the second
On Tuesday 09 June 2009 04:18:10 Grünewald Michaël wrote:
Le 8 juin 09 à 23:20, Polytropon a écrit :
On Mon, 8 Jun 2009 22:12:17 +0200, Roland Smith rsm...@xs4all.nl
wrote:
On Sun, Jun 07, 2009 at 11:52:17PM -0500, Lars Eighner wrote:
What I need most is to find (a) make tutorial(s)
On Monday 08 June 2009 08:59:30 Tim Judd wrote:
What make.conf was to world+ports, is now
src.conf = world, make.conf = ports
Nope. src.conf = world, make.conf = world+ports. Important distinction, which
you'll notice when putting shared variables in make.conf (WITH_DEBUG,
WITH_OPENLDAP
On Monday 08 June 2009 18:36:39 Jeffrey Goldberg wrote:
On Jun 8, 2009, at 11:59 AM, Tim Judd wrote:
If that's related to 'world', all world-related build options should
be placed in src.conf now. What make.conf was to world+ports, is now
src.conf = world, make.conf = ports
What is the
Maybe some of you have already heard about Intels product change and
early EOL of various newly introduced Core-i7 CPUs like i7-940 and
i7-965. I was wondering if Intel isn't also changing XEON products to
adjust clock speed and replace XEON W3540 with XEON W3550 and XEON W3570
with, say, XEON
Correct. I do the same here.
I also do use make to produce LaTeX documents. I even `published' my
collection of makefiles at https://gna.org/projects/bsdmakepscripts/
make is universal too, as many other unix tools. for example i use make
and cpp (C preprocessor) for making HTML pages :)
On Tuesday 09 June 2009 03:10:46 am Matthew Seaman wrote:
Or store your data in a RDBMS rather than in the filesystem.
Hear, hear. I'm hard pressed to imagine why you'd need 100M 1KB files.
--
Kirk Strauser
___
freebsd-questions@freebsd.org mailing
Mike Jeays wrote:
Isn't that a linuxism? Looking at the man pages for the date command for
FreeBSD, it looks as if 'date -v+1d' will return tomorrow's date (and it does,
I checked). The -d option is to do with daylight saving time.
- eot-
I see; will have that incorporated in the script.
Hiya
trying to build kernel for 7.2 and get this
(my earlier problem was my having CFLAGS=... in /etc/src.conf)
MAKE=make sh /usr/src/sys/conf/newvers.sh LERGY72
cc -c -O -pipe -std=c99 -g -Wall -Wredundant-decls -Wnested-externs -
Wstrict-prototypes -Wmissing-prototypes -Wpointer-arith
Hello,
I'm basically a novice at the whole configure/make process. I've hacked
my way through some errors in the past, but I can't get past this one.
It used the GNU auto tools and the configure script has a bunch of
shell, c, sed, awk, etc. stuff that's k1lling me!
Anyway, I can't get
On Tuesday 09 June 2009 08:00:20 am DA Forsyth wrote:
Hiya
trying to build kernel for 7.2 and get this
(my earlier problem was my having CFLAGS=... in /etc/src.conf)
MAKE=make sh /usr/src/sys/conf/newvers.sh LERGY72
cc -c -O -pipe -std=c99 -g -Wall -Wredundant-decls -Wnested-externs -
Hello!
I use skype on 3 computers.
1. FreeBSD 6.4-STABLE, port skype12-1.2.0.18
2. FreeBSD 7.2-STABLE, port skype 2.x
3. Windows XP, skype 3.8
Suddenly, starting a couple of weeks ago, I'm no longer able to log in
to Skype on computer 1 (Skype just says Invalid password). I can
still log
On Tue, 9 Jun 2009 10:38:23 -0500, Gary Gatten ggat...@waddell.com wrote:
Hello,
I'm basically a novice at the whole configure/make process. I've
hacked my way through some errors in the past, but I can't get past
this one. It used the GNU auto tools and the configure script has a
bunch of
On Tue, Jun 9, 2009 at 7:42 PM, Kent Stewart kstew...@owt.com wrote:
On Tuesday 09 June 2009 08:00:20 am DA Forsyth wrote:
Hiya
trying to build kernel for 7.2 and get this
(my earlier problem was my having CFLAGS=... in /etc/src.conf)
MAKE=make sh /usr/src/sys/conf/newvers.sh LERGY72
On Tue, Jun 09, 2009 at 10:38:23AM -0500, Gary Gatten wrote:
Anyway, I can't get past this error and the app developers/users aren't
offering timely help, so if anyone here is interested in debugging a
configure script and helping me get this (nTop 3.3.10) compiled would be
GREATLY
On Tue, Jun 9, 2009 at 7:42 PM, Giorgos Keramidas
keram...@ceid.upatras.grwrote:
On Tue, 9 Jun 2009 10:38:23 -0500, Gary Gatten ggat...@waddell.com
wrote:
Hello,
I'm basically a novice at the whole configure/make process. I've
hacked my way through some errors in the past, but I can't
Yep, one reason I thought OT would be best is I'm trying to move this
app to a Solaris 10 x86 system (don't ask). Got all the GNU tools from
csw.org.
Anyway, the autoconf/make/configure scripts are basic code so figured
anyone that's done this stuff could help. I don't feel like joining
YAUG
With all the recent what's appropriate for this list and wha's not
issues, I didn't know if this was the appropriate forum or not since
it's not really a FBSD issue. ESPECIALLY since I'm trying to get it to
configure/make on Solaris 10 x86. See my recent post, but I though I
could get some help
so this could be a reference to all of them.
I know (and agree) that everybody should RTFM but there are times
when the fine manual is just not enough and real world examples
provide a thorough understanding.
just few months and this will be general unix support list for everybody.
how about
On Tue, Jun 9, 2009 at 8:12 PM, Wojciech Puchar
woj...@wojtek.tensor.gdynia.pl wrote:
so this could be a reference to all of them.
I know (and agree) that everybody should RTFM but there are times
when the fine manual is just not enough and real world examples
provide a thorough
I'm trying to convert all PDF files in a directory to text using
pdftotext. I tried the following command:
$ find *.pdf | xargs -0 pdftotext
Error: Couldn't open file 'Ross-JAMA-2007 (Prostate Screening Strategies).pdf
Sanda-JAMA-2009 (Prostate Cancer Treatment).pdf
'
Why is this not working?
just few months and this will be general unix support list for everybody. how
about name
change?
and here we go again ...
yes. Into general mess of everything off topic being ok because you/others
only want to help people
___
On Tuesday 09 June 2009 09:54:41 am Valentin Bud wrote:
On Tue, Jun 9, 2009 at 7:42 PM, Kent Stewart kstew...@owt.com wrote:
On Tuesday 09 June 2009 08:00:20 am DA Forsyth wrote:
Hiya
trying to build kernel for 7.2 and get this
(my earlier problem was my having CFLAGS=... in
On Jun 8, 2009, at 5:17 PM, Daniel Underwood wrote:
I'm looking for a way to manage my personal collection of research
articles. Ideally I'd like some way to keep records on authors,
keywords, journals, and publication years of articles (PDF files)
downloaded onto my local drive.
In the
On Tue, Jun 09, 2009 at 07:12:57PM +0200, Wojciech Puchar wrote:
so this could be a reference to all of them.
I know (and agree) that everybody should RTFM but there are times
when the fine manual is just not enough and real world examples
provide a thorough understanding.
just few
On Tue, Jun 09, 2009 at 07:25:10PM +0200, Wojciech Puchar wrote:
just few months and this will be general unix support list for everybody.
how about name
change?
and here we go again ...
yes. Into general mess of everything off topic being ok because you/others
only want to help
On Tue, 9 Jun 2009 19:12:57 +0200 (CEST), Wojciech Puchar
woj...@wojtek.tensor.gdynia.pl wrote:
so this could be a reference to all of them.
I know (and agree) that everybody should RTFM but there are times
when the fine manual is just not enough and real world examples
provide a thorough
2009/6/9 Daniel Underwood djuatde...@gmail.com:
I'm trying to convert all PDF files in a directory to text using
pdftotext. I tried the following command:
$ find *.pdf | xargs -0 pdftotext
Error: Couldn't open file 'Ross-JAMA-2007 (Prostate Screening Strategies).pdf
Sanda-JAMA-2009
On Tue, Jun 9, 2009 at 8:30 PM, Kent Stewart kstew...@owt.com wrote:
On Tuesday 09 June 2009 09:54:41 am Valentin Bud wrote:
On Tue, Jun 9, 2009 at 7:42 PM, Kent Stewart kstew...@owt.com wrote:
On Tuesday 09 June 2009 08:00:20 am DA Forsyth wrote:
Hiya
trying to build kernel for
just few months and this will be general unix support list for
everybody. how about name change?
Stop the whining already, will you? If you have no useful content to
contribute to a thread, please consider ignoring it.
could you precisely define useful content. I just point out that this
only want to help people
The most off-topic stuff on this list lately has been your
complaining about stuff being off-topic.
Not most, but certainly off topic.
But well - with no moderation or other execution of on-topic rule, what
you expect?
On the other hand, using make to grow
I this thread dies right now, I PROMISE I'll just figure it out
myself...
-Original Message-
From: Wojciech Puchar [mailto:woj...@wojtek.tensor.gdynia.pl]
Sent: Tuesday, June 09, 2009 12:49 PM
To: Jerry McAllister
Cc: Giorgos Keramidas; Gary Gatten; freebsd-questions@freebsd.org;
On Tue, 9 Jun 2009 19:47:49 +0200 (CEST), Wojciech Puchar
woj...@wojtek.tensor.gdynia.pl wrote:
just few months and this will be general unix support list for
everybody. how about name change?
Stop the whining already, will you? If you have no useful content to
contribute to a thread,
ill...@gmail.com wrote:
2009/6/9 Daniel Underwood djuatde...@gmail.com:
I'm trying to convert all PDF files in a directory to text using
pdftotext. I tried the following command:
$ find *.pdf | xargs -0 pdftotext
Error: Couldn't open file 'Ross-JAMA-2007 (Prostate Screening Strategies).pdf
I this thread dies right now, I PROMISE I'll just figure it out
myself...
what exactly do you want to figure?
-Original Message-
From: Wojciech Puchar [mailto:woj...@wojtek.tensor.gdynia.pl]
Sent: Tuesday, June 09, 2009 12:49 PM
To: Jerry McAllister
Cc: Giorgos Keramidas; Gary
On Tue, Jun 9, 2009 at 9:43 PM, Wojciech Puchar
woj...@wojtek.tensor.gdynia.pl wrote:
I this thread dies right now, I PROMISE I'll just figure it out
myself...
what exactly do you want to figure?
With all due respect Mr. Puchar I guess you haven't read
the OP's problem which he posted in
On Tue 09 Jun 2009 at 10:09:17 PDT Gary Gatten wrote:
With all the recent what's appropriate for this list and wha's not
issues, I didn't know if this was the appropriate forum or not since
it's not really a FBSD issue.
The attempt to restrict this mailing list to appropriate questions
seems
On Tue 09 Jun 2009 at 10:35:28 PDT Jerry McAllister wrote:
The most off-topic stuff on this list lately has been your complaining
about stuff being off-topic.
...and people complaining about Woj's complaints.
...and my own complaining about the people complaining about Woj's
complaints.
Hello list
I've got a CD-R from a friend, (who runs windows) that I cannot mount on
my 7.2-RELEASE system. It's readable in another windows machine.
Other CD and DVD's is no problem but this one is.
The error I get is:
mount -t cd9660 /dev/acd0 /cdrom
mount_cd9660: /dev/acd0: Invalid
On Tue, Jun 09, 2009 at 08:53:12PM +0200, Leslie Jensen wrote:
Hello list
I've got a CD-R from a friend, (who runs windows) that I cannot mount on
my 7.2-RELEASE system. It's readable in another windows machine.
Other CD and DVD's is no problem but this one is.
The error I get is:
$ find *.pdf -exec pdftotext {} \;
Error: Document has not the mandatory ending %EOF
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to
Roland Smith skrev:
On Tue, Jun 09, 2009 at 08:53:12PM +0200, Leslie Jensen wrote:
Hello list
I've got a CD-R from a friend, (who runs windows) that I cannot mount on
my 7.2-RELEASE system. It's readable in another windows machine.
Other CD and DVD's is no problem but this one is.
The
Daniel Underwood wrote:
$ find *.pdf -exec pdftotext {} \;
Error: Document has not the mandatory ending %EOF
Have you run pdftotext on a single file in your archive as a test?
--Joseph Lenox
___
freebsd-questions@freebsd.org mailing list
Hmm.. The command
find *.pdf -exec pdftotext {} \;
works in directories in which no PDF file returns the Document has
not the mandatory ending %EOF error. When a directory contains one
of these files, none of the files get converted. Is there some way to
ignore or skip over this %EOF problem
On Tue, 9 Jun 2009, Leslie Jensen wrote:
I've got a CD-R from a friend, (who runs windows) that I cannot mount on my
7.2-RELEASE system. It's readable in another windows machine.
Other CD and DVD's is no problem but this one is.
The error I get is:
mount -t cd9660 /dev/acd0 /cdrom
Warren Block skrev:
On Tue, 9 Jun 2009, Leslie Jensen wrote:
I've got a CD-R from a friend, (who runs windows) that I cannot mount
on my 7.2-RELEASE system. It's readable in another windows machine.
Other CD and DVD's is no problem but this one is.
The error I get is:
mount -t cd9660
Leslie Jensen wrote:
[snip]
I tried that as well, same error unfortunately
mount -t udf /dev/acd0 /cdrom
mount_udf: /dev/acd0: Invalid argument
So is this a new MS filesystem that no one but Vista users can read? I'm
afraid we'll properly see more of these problems unless support is
The error I get is:
mount -t cd9660 /dev/acd0 /cdrom
mount_cd9660: /dev/acd0: Invalid argument
I've Googled and read the handbook but I think my settings are ok.
Any suggestions?
ask your friend what filesystem he use. what is filesystem? ;)
With windoze user there are only two options -
The most off-topic stuff on this list lately has been your complaining
about stuff being off-topic.
...and people complaining about Woj's complaints.
...and my own complaining about the people complaining about Woj's
complaints. :)
and the circle goes on. Who is right - doesn't matter
what exactly do you want to figure?
With all due respect Mr. Puchar I guess you haven't read
the OP's problem which he posted in the first message.
i read, but THEN it got completely off topic and THEN i started to
complain.
___
Because that version by default now uses an UDF-based live file system
[http://en.wikipedia.org/wiki/Live_File_System].
Try mount_udf
Does it actually work now?
I tried once in FBSD 6.1 with one made under windoze and mastered DVD
(which by standard requirements are UDF, and may be UDF+ISO).
Michael Powell skrev:
Leslie Jensen wrote:
[snip]
I tried that as well, same error unfortunately
mount -t udf /dev/acd0 /cdrom
mount_udf: /dev/acd0: Invalid argument
So is this a new MS filesystem that no one but Vista users can read? I'm
afraid we'll properly see more of these problems
I just installed FreeBSD-7.2. I attempted to burn a CD; however,
when the burn completes, I receive this message:
burncd: ioctl(CDRIOCFIXATE); Input/output error.
This is the command line:
# burncd -ev -s max fixate data notes.txt
Now, if I do not use the 'fixate' command, no error message is
Try kldload udf.ko prior to the mount attempt. Check and see if it auto-
loaded udf_iconv.ko as it should. If that one isn't present in kldstat load
it too.
Don't really know if the particular UDF spec/format that FreeBSD supports
is the same as Vista. No Vista here to try.
-Mike
burncd: ioctl(CDRIOCFIXATE); Input/output error.
This is the command line:
# burncd -ev -s max fixate data notes.txt
are notes.txt your CD image? at least should be multiple of 2kB, and
probably some minimal size. i don't know what is minimal track size but in
order of 100K.
Leslie Jensen wrote:
Michael Powell skrev:
Leslie Jensen wrote:
[snip]
I tried that as well, same error unfortunately
mount -t udf /dev/acd0 /cdrom
mount_udf: /dev/acd0: Invalid argument
So is this a new MS filesystem that no one but Vista users can read? I'm
afraid we'll properly
Carmel carmel...@hotmail.com writes:
I just installed FreeBSD-7.2. I attempted to burn a CD; however,
when the burn completes, I receive this message:
burncd: ioctl(CDRIOCFIXATE); Input/output error.
This is the command line:
# burncd -ev -s max fixate data notes.txt
Now, if I do not
Michael Powell skrev:
A long time ago I tried a Nero add-on of some form or fashion (don't recall
the exact name) for Windows that essentially allowed a CD disk to be mounted
and used as a disk drive, which allowed for drag and drop in Explorer. It
was buggy and crashed regularly so I
Daniel Underwood wrote:
Yes, it works fine on most PDFs. There are a couple that give me:
$ pdftotext Sanda-JAMA-2009\ \(Prostate\ Cancer\ Treatment\).pdf
Error: Document has not the mandatory ending %EOF
It's probably an issue with the PDF itself, not with the program.
--Joseph Lenox
On 6/9/09, Carmel carmel...@hotmail.com wrote:
I just installed FreeBSD-7.2. I attempted to burn a CD; however,
when the burn completes, I receive this message:
burncd: ioctl(CDRIOCFIXATE); Input/output error.
This is the command line:
# burncd -ev -s max fixate data notes.txt
Now, if I
On Tue, 9 Jun 2009 16:31:42 +0200 (CEST) Wojciech Puchar said:
Correct. I do the same here.
I also do use make to produce LaTeX documents. I even `published' my
collection of makefiles at https://gna.org/projects/bsdmakepscripts/
make is universal too, as many other unix tools. for
On Tue, 9 Jun 2009 16:31:10 -0400, Carmel carmel...@hotmail.com wrote:
I just installed FreeBSD-7.2. I attempted to burn a CD; however,
when the burn completes, I receive this message:
burncd: ioctl(CDRIOCFIXATE); Input/output error.
This is the command line:
# burncd -ev -s max fixate
On Tue, 09 Jun 2009 16:07:03 -0500, LoH lordofhyph...@gmail.com wrote:
Daniel Underwood wrote:
Yes, it works fine on most PDFs. There are a couple that give me:
$ pdftotext Sanda-JAMA-2009\ \(Prostate\ Cancer\ Treatment\).pdf
Error: Document has not the mandatory ending %EOF
Which signal is sent to a process when one types ^z or
Control-z? It appears to be SIGSTOP and according to signal's
man page, this is one signal you can't catch.
I have an application with a signal handler I wrote and
I am trying to discourage folks typing CTRL-Z if it hangs
because that
On Tue, 09 Jun 2009 16:30:30 -0500, Martin McCormick
mar...@dc.cis.okstate.edu wrote:
Which signal is sent to a process when one types ^z or
Control-z? It appears to be SIGSTOP and according to signal's
man page, this is one signal you can't catch.
You can check the setting with this command:
On 6/9/09, Carmel carmel...@hotmail.com wrote:
I just installed FreeBSD-7.2. I attempted to burn a CD; however,
when the burn completes, I receive this message:
burncd: ioctl(CDRIOCFIXATE); Input/output error.
I have been getting that error message on and off for some time
(years) now. The
I retrieved a fresh copy of the error-causing PDF, and now all is
well. Thanks for all the excellent help!
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to
In the last episode (Jun 09), Polytropon said:
On Tue, 09 Jun 2009 16:30:30 -0500, Martin McCormick
mar...@dc.cis.okstate.edu wrote:
Which signal is sent to a process when one types ^z or Control-z? It
appears to be SIGSTOP and according to signal's man page, this is one
signal you can't
On Tue, Jun 09, 2009 at 11:42:15PM +0200, Polytropon wrote:
On Tue, 09 Jun 2009 16:30:30 -0500, Martin McCormick
mar...@dc.cis.okstate.edu wrote:
Which signal is sent to a process when one types ^z or
Control-z? It appears to be SIGSTOP and according to signal's
man page, this is one
On Tue, 9 Jun 2009 17:07:30 -0500, Dan Nelson dnel...@allantgroup.com wrote:
^Z sends a SIGTSTP, which can be caught (or ignored, in your case).
18SIGTSTP stop process stop signal generated from
keyboard
What is the way to get
On Wed, 10 Jun 2009 00:15:27 +0200, Erik Trulsson ertr1...@student.uu.se
wrote:
Not quite. It indicates (according to stty(1)) that ^Z generates the
SUSP character.
The termios(4) manpage (referenced by stty(1)) says that
SUSPIf the ISIG flag is enabled, receipt of the SUSP character
On Mon, Jun 08, 2009 at 05:31:12PM -0400, Jerry wrote:
On Mon, 8 Jun 2009 14:55:49 -0600
Chad Perrin per...@apotheon.com wrote:
I try to learn from others' mistakes to reduce the likelihood that I
will be forced to learn from my own. If you really want to learn from
your own mistakes,
On Jun 8, 2009, at 7:15 PM, Gary Kline wrote:
not surprisingly, i found a fla w in my getc(fp) program that
tried to read past ? and ? ... the example i added to my
test file was simply the 2 bytes and ?. so if you have a
stray
?
with a
1 - 100 of 108 matches
Mail list logo
