Re: No keyboard after ports update, 2x moused_enable=YES culprit

2011-05-16 Thread Polytropon
On Sun, 15 May 2011 12:18:28 -0700, Chip Camden sterl...@camdensoftware.com wrote: I wish I could figure out what dependency wanted HAL to be installed so I could remove it. I would assume that the HAL dependency may be required by some deeper-inside Gnome part that is used by Gimp, maybe a

Re: CD Boot to install hangs

2011-05-16 Thread Polytropon
On Sun, 15 May 2011 17:28:18 -0700, Alexander Lardner linuxtu...@gmail.com wrote: Hello, I am re-asking as it's rather urgent. I have burned a CD of PowerPC 8.2 to install on my old iMac G3. It boots, but it stops at the line that reads: acd0: DVDROM MATSHITADVD-ROM SR-8184/AA32 at

Re: VIMAGE in fbsd 9.0

2011-05-16 Thread Nikos Vassiliadis
On 5/15/2011 7:49 PM, Fbsd8 wrote: What is the current status of VIMAGE in Freebsd 9.0? I *think* all VIMAGE related code in 9.0 has been merged to 8-STABLE. It is still tagged experimental. Most things work. Is there something that doesn't work for you? Is VIMAGE going to be included in the

adding new disk 2TB, gpt?

2011-05-16 Thread n dhert
I have a running FreeBSD-8.2-amd system, FreeBSD was installed in jan 2009 (then FreeBSD 7.0), which a fisk disk of 200 GB for /, swap /usr /var /tmp. Later that month, I added a 9 TB disk using /sbin/gpt (since sysinstall uses bsdlabel/fdisk, it can't create disks larger than 2 TB) I want to add

Re: No keyboard after ports update, 2x moused_enable=YES culprit

2011-05-16 Thread Daniel Staal
--As of May 16, 2011 10:00:38 AM +0200, Polytropon is alleged to have said: On Sun, 15 May 2011 12:18:28 -0700, Chip Camden sterl...@camdensoftware.com wrote: I wish I could figure out what dependency wanted HAL to be installed so I could remove it. I would assume that the HAL dependency may

Re: CD Boot to install hangs

2011-05-16 Thread Warren Block
On Mon, 16 May 2011, Polytropon wrote: On Sun, 15 May 2011 17:28:18 -0700, Alexander Lardner linuxtu...@gmail.com wrote: Hello, I am re-asking as it's rather urgent. I have burned a CD of PowerPC 8.2 to install on my old iMac G3. It boots, but it stops at the line that reads: acd0: DVDROM

Re: No keyboard after ports update, 2x moused_enable=YES culprit

2011-05-16 Thread Warren Block
On Mon, 16 May 2011, Daniel Staal wrote: --As of May 16, 2011 10:00:38 AM +0200, Polytropon is alleged to have said: On Sun, 15 May 2011 12:18:28 -0700, Chip Camden sterl...@camdensoftware.com wrote: I wish I could figure out what dependency wanted HAL to be installed so I could remove it.

Re: No keyboard after ports update, 2x moused_enable=YES culprit

2011-05-16 Thread Chip Camden
Quoth Daniel Staal on Monday, 16 May 2011: --As of May 16, 2011 10:00:38 AM +0200, Polytropon is alleged to have said: On Sun, 15 May 2011 12:18:28 -0700, Chip Camden sterl...@camdensoftware.com wrote: I wish I could figure out what dependency wanted HAL to be installed so I could remove

GL811e usb chipset

2011-05-16 Thread Chris Whitehouse
Hi, does anyone know if the GL811e chipset is supported in 8.2R? It's supposed to be common in external usb hard disk and optical disk drives. It's not mentioned in the hardware notes and google didn't turn up much. thanks Chris ___

Re: No keyboard after ports update, 2x moused_enable=YES culprit

2011-05-16 Thread Eitan Adler
On Mon, May 16, 2011 at 4:00 AM, Polytropon free...@edvax.de wrote: On Sun, 15 May 2011 12:18:28 -0700, Chip Camden sterl...@camdensoftware.com wrote: I wish I could figure out what dependency wanted HAL to be installed so I could remove it. I would assume that the HAL dependency may be

Re: No keyboard after ports update, 2x moused_enable=YES culprit

2011-05-16 Thread Chip Camden
Quoth Warren Block on Monday, 16 May 2011: On Mon, 16 May 2011, Daniel Staal wrote: --As of May 16, 2011 10:00:38 AM +0200, Polytropon is alleged to have said: On Sun, 15 May 2011 12:18:28 -0700, Chip Camden sterl...@camdensoftware.com wrote: I wish I could figure out what dependency

Slightly OT: Hardware For FreeNAS

2011-05-16 Thread Tim Daneliuk
Slightly OT, but since it's based on FreeBSD, I thought I'd start here... Can anyone recommend a good hardware platform (components) around which to build a FreeNAS server? The important non-functional requirements are: 1) Quiet to the point of silent. 2) Reliable/redundant TIA, --

Re: No keyboard after ports update, 2x moused_enable=YES culprit

2011-05-16 Thread Polytropon
On Mon, 16 May 2011 11:14:49 -0700, Chip Camden sterl...@camdensoftware.com wrote: Quoth Warren Block on Monday, 16 May 2011: One problem with getting rid of hal entirely is libgnomeui, which depends on gvfs, which depends on gnome-mount, which depends on hal. That's what I did assume.

Re: No keyboard after ports update, 2x moused_enable=YES culprit

2011-05-16 Thread Warren Block
On Mon, 16 May 2011, Polytropon wrote: Maybe, just MAYBE, the gnome-mount dependency can be installed without requiring HAL. I don't know much about the details, but HAL has been said to be the means for automounting local media, and maybe is in conjuction with Samba. If you can disable such

Re: adding new disk 2TB, gpt?

2011-05-16 Thread Robert Simmons
On Mon, May 16, 2011 at 10:27 AM, n dhert ndhert...@gmail.com wrote: I have a running FreeBSD-8.2-amd system, FreeBSD was installed in jan 2009 (then FreeBSD 7.0), which a fisk disk of 200 GB for /, swap /usr /var /tmp. Later that month, I added a 9 TB disk using /sbin/gpt (since sysinstall

Re: No keyboard after ports update, 2x moused_enable=YES culprit

2011-05-16 Thread Chad Perrin
On Mon, May 16, 2011 at 11:14:49AM -0700, Chip Camden wrote: Yes, that seems to be the sticking point. The only option appears to be doing without gimp, gnumeric, and dia, which all depend upon libgnomeui. Any Gnome-free alternatives out there? I don't use anything like gnumeric or dia,

Re: No keyboard after ports update, 2x moused_enable=YES culprit

2011-05-16 Thread Chip Camden
Quoth Chad Perrin on Monday, 16 May 2011: On Mon, May 16, 2011 at 11:14:49AM -0700, Chip Camden wrote: Yes, that seems to be the sticking point. The only option appears to be doing without gimp, gnumeric, and dia, which all depend upon libgnomeui. Any Gnome-free alternatives out there?

Re: No keyboard after ports update, 2x moused_enable=YES culprit

2011-05-16 Thread Chip Camden
Quoth Chad Perrin on Monday, 16 May 2011: On Mon, May 16, 2011 at 11:14:49AM -0700, Chip Camden wrote: Yes, that seems to be the sticking point. The only option appears to be doing without gimp, gnumeric, and dia, which all depend upon libgnomeui. Any Gnome-free alternatives out there?

Input file for shutdown warning?

2011-05-16 Thread Alexander Lardner
Hello, Is it possible to do something like this: shutdown -p now /root/somefile How would I do that, or is it even possible? Thanks, Alex ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To

Re: Input file for shutdown warning?

2011-05-16 Thread RW
On Mon, 16 May 2011 17:38:21 -0700 Alexander Lardner linuxtu...@gmail.com wrote: Hello, Is it possible to do something like this: shutdown -p now /root/somefile How would I do that, or is it even possible? According to the man page it is. ___

Re: Input file for shutdown warning?

2011-05-16 Thread RW
On 17 May 2011 01:24:56 - John Levine jo...@iecc.com wrote: In article 20110517021633.26b47...@gumby.homeunix.com you write: On Mon, 16 May 2011 17:38:21 -0700 Alexander Lardner linuxtu...@gmail.com wrote: Hello, Is it possible to do something like this: shutdown -p now

Re: Input file for shutdown warning?

2011-05-16 Thread John Levine
In article 20110517021633.26b47...@gumby.homeunix.com you write: On Mon, 16 May 2011 17:38:21 -0700 Alexander Lardner linuxtu...@gmail.com wrote: Hello, Is it possible to do something like this: shutdown -p now /root/somefile # shutdown - -p now /root/somefile If you had read the man

Re: No keyboard after ports update, 2x moused_enable=YES culprit

2011-05-16 Thread Warren Block
On Mon, 16 May 2011, Chip Camden wrote: Looks like cinepaint doesn't have any GNOME dependencies, and also no HAL dependency. Now if I can just learn how to do everything I know how to do in GIMP, I'll be set for that piece. I don't use dia very often (it's for diagrams). Gnumeric I use more