Ok. I found the reason for the throughput drop in case of IPv6.
Reason is that the "tcp check sum" calculation is mandated in case of IPv6
irrespective of whether the card is doing it or not (checksum offload). Is
there a reason why freebsd is doing it that way?
/Venkat
On Tue, May 22, 2012 at 11
> From owner-freebsd-questi...@freebsd.org Tue May 22 23:03:03 2012
> Date: Tue, 22 May 2012 22:58:39 -0500 (CDT)
> From: Lars Eighner
> To: freebsd-questions@freebsd.org
> Subject: Connect to Clear hub modem
>
>
> This is NOT a wireless question.
>
> I am running FreeBSD 8.3-p1.
>
> I want to co
On May 22, 2012, at 8:58 PM, Lars Eighner wrote:
> But I don't have a clue what to do from here.
Try running 'dhclient'. If that works, add this to /etc/rc.conf:
ifconfig_re0="DHCP"
> The hub is supposed to have a web page at (imaginary address) 192.168.15.1,
> but I haven't been able to rais
On 05/22/12 19:53, Robert Bonomi wrote:
I implemented a RPC system at SLAC - actually got RPC numbers from Sun!
But, it is slow. Unless it is located far away (two miles at SLAC), it
is much faster to do it with a driver, etc.
Tom Dean
___
freebsd-qu
This is NOT a wireless question.
I am running FreeBSD 8.3-p1.
I want to connect to Clear Wireless Internet. I know I cannot do this with
a Clear dongle, because Clear uses WiMax which is not supported.
Instead I have a Clear hub modem. I want to connect by ethernet to it by
wire.
I get this
> From owner-freebsd-questi...@freebsd.org Tue May 22 21:30:21 2012
> Date: Tue, 22 May 2012 19:27:44 -0700
> From: "Thomas D. Dean"
> To: freebsd-questions@freebsd.org
> Subject: Re: Using inb() and outb()
>
> On 05/22/12 17:09, Eitan Adler wrote:
> > On 22 May 2012 14:25, Thomas D. Dean wrote:
On 05/22/12 17:09, Eitan Adler wrote:
On 22 May 2012 14:25, Thomas D. Dean wrote:
On 05/22/12 14:08, Robert Bonomi wrote:
That is what I thought.
The entire operation will have to run as root. Nothing will be non-root.
Can you make a SUID helper which only does the inb/outb operations as r
- Original Message -
From: Gary Aitken
To: freebsd-questions@freebsd.org
Sent: Tue, 22 May 2012 19:02:30 -0400 (EDT)
Subject: portsnap update won't update original /usr/ports
According to the handbook, one can do
portsnap fetch
portsnap update
and the update will work with a previou
On 21/05/2012 00:11, Chris Brennan (lists) wrote:
Greetings!
I have a FreeBSD 9 system with 3 different ZFS pools on it. I am
booting from a ro CF Card w/o any major issues, the problem I am
encountering is that zroot needs to be mounted at boot first, because
it contains /usr, zhome and tank co
> Dear folks,
>
> I have an acer-aspire 1 netbook running FreeBSD 9.0 i386. It was
> working beautifully, but after todays updates, X no longer works.
>
> On screen I have
>
> drm0: on vgapci0
> info: [drm] AGP at 0x2000 256MB
> info: [drm] Initialized i915 1.6.0 20080730
>
> I have also:
>
On 23/05/2012 08:32, Gary Aitken wrote:
According to the handbook, one can do portsnap fetch portsnap update
and the update will work with a previously created ports tree; I
presume this includes one created during system install.
However, when I attempted this, portsnap complained: /usr/ports w
On 22 May 2012 14:25, Thomas D. Dean wrote:
> On 05/22/12 14:08, Robert Bonomi wrote:
>
> That is what I thought.
>
> The entire operation will have to run as root. Nothing will be non-root.
Can you make a SUID helper which only does the inb/outb operations as root?
--
Eitan Adler
Hello Sales,
1
I will like to have your newly updated site,so that i can give you the
list of what i really want from your website. Also i need you to confirm if you
accept credit card orders and you can use FedEx or Ups to ship within United
State
Kindly reply back asap today.
Thanks
According to the handbook, one can do
portsnap fetch
portsnap update
and the update will work with a previously created ports tree;
I presume this includes one created during system install.
However, when I attempted this, portsnap complained:
/usr/ports was not created by portsnap.
You m
Hello Sales,
I will like to have your newly updated site,so that i can give you the
list of what i really want from your website. Also i need you to confirm if you
accept credit card orders and you can use FedEx or Ups to ship within United
State
Kindly reply back asap today.
Thanks
I need to get away from sys.mk - no usr/share/mk.
This is normally done with 'make -r'
Is there a way to do it from within a Makefile?
Tom Dean
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
On 05/22/12 14:08, Robert Bonomi wrote:
That is what I thought.
The entire operation will have to run as root. Nothing will be non-root.
Don't like that, but, it is nanoBSD and hardware control
Tom Dean
___
freebsd-questions@freebsd.org mailing
wrote;
>
> For directories, the link-count is quite obviously the number of filesystem
> entities contained within.
That is *INCORRECT*. The link-count on a directory is the number of dir-
ectory entries (file names) tht resolve to it, just as with any other file.
The count starts at *TWO* -- o
> From owner-freebsd-questi...@freebsd.org Tue May 22 15:18:43 2012
> Date: Tue, 22 May 2012 13:13:35 -0700
> From: "Thomas D. Dean"
> To: freebsd-questions@freebsd.org
> Subject: Using inb() and outb()
>
> I have nanoBSD running a hardware control application.
>
> To do this, I need inb() and ou
On 05/22/12 10:46, Thomas D. Dean wrote:
I rebuilt the kernel with the new NFS options and it works.
Tom Dean
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail t
> -Original Message-
> From: owner-freebsd-questi...@freebsd.org [mailto:owner-freebsd-
> questi...@freebsd.org] On Behalf Of Gary Aitken
> Sent: Tuesday, May 22, 2012 1:06 PM
> To: freebsd-questions@freebsd.org
> Subject: hard link identification
>
> Is there any way to tell if something
Hello Gary Aitken,
>
> 1. I'm assuming that since pkg_add looks for the tarball, it is
> supposed to exist. Is that a valid assumption?
>
It is sort of. Have look at
http://ftp.freebsd.org/pub/FreeBSD/ports/amd64/packages-9-stable/All/
>
> 2. Anyone know why the tarball isn't there? Should
Am 22.05.2012, 21:59 Uhr, schrieb Michael Ross :
Am 22.05.2012, 21:43 Uhr, schrieb Jos Chrispijn :
I want to compile my kernel and I read that for this I need to have the
complete /SRC tree installed.
If I do this via sysinstall, I get either a display that the chosen
server is not availabl
I have nanoBSD running a hardware control application.
To do this, I need inb() and outb() functions.
I an do this as root. However, it is better if none of the control
system is run as root.
How do I allow these functions to one specific user?
Tom Dean
___
On 22 May 2012 13:06, Gary Aitken wrote:
> Is there any way to tell if something is a hard link, other than
> ls -i of relevant files and seeing that the inode is the same?
> or a better way?
Hard links are not special. You can't tell something is a "hard link"
because normal files are exactly t
I was trying to pkg_add openoffice and it fails (file not found) when
trying to fetch the openoffice.org tarball.
1. I'm assuming that since pkg_add looks for the tarball, it is
supposed to exist. Is that a valid assumption?
2. Anyone know why the tarball isn't there? Should I be trying t
Is there any way to tell if something is a hard link, other than
ls -i
of relevant files and seeing that the inode is the same?
or a better way?
I was a bit confused when looking at /root/.cshrc and then discovering a
.cshrc in / as well.
Thanks,
Gary
___
Am 22.05.2012, 21:43 Uhr, schrieb Jos Chrispijn :
I want to compile my kernel and I read that for this I need to have the
complete /SRC tree installed.
If I do this via sysinstall, I get either a display that the chosen
server is not available or these are not available for FreeBSD 9.
Is the
I want to compile my kernel and I read that for this I need to have the
complete /SRC tree installed.
If I do this via sysinstall, I get either a display that the chosen
server is not available or these are not available for FreeBSD 9.
Is there a way to update /src by CVSUP or otherwise?
thanks
Hello Sales,
I will like to have your newly updated site,so that i can give you the
list of what i really want from your website. Also i need you to confirm if you
accept credit card orders and you can use FedEx or Ups to ship within United
State
Kindly reply back asap today.
Thanks
I built nanoBSD on
> uname -a
FreeBSD P9X79.tddhome 9.0-STABLE FreeBSD 9.0-STABLE #2: Fri May 11
20:41:54 PDT 2012 tomdean@P9X79.tddhome:/usr/src/sys/GENERIC amd64
for a TS5700 with a ELAN SC520. The trick was to override some
variables in the .cfg file.
The image will boot and all seems
LRO is a huge win for 10G (as is TSO on the TX side), so odds are good its
behind the drop,
in any case you'll be able to test that soon :)
Jack
On Tue, May 22, 2012 at 10:35 AM, Venkat Duvvuru wrote:
> Thanks for the response.
>
> I observed that there is a significant performance drop in cas
Can anyone tell me the status of gimp 2.8 for FreeBSD? I just assumed
it would be in the ports tree but I don't see it.
Thanks,
Gary
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubsc
Thanks for the response.
I observed that there is a significant performance drop in case of IPv6 on
the "rx" side.
While I'm able to hit line rate ~9.5 Gbps on a 10gb NIC for IPv4..I could
only get ~6 Gbps on the "rx" front for IPv6...However "tx" for IPv6 is on
par with IPv4 hitting almost line r
Thank you (all) for your information; I followed your suggestions and it
all works flawless!
best regards,
Jos Chrispijn
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any
In my crontab I define script 'do_daily.run':
30 23 * * * root
/root/cronjobs/do_daily.run
The content of this script (amongst others) is:
rsync -avpog /etc /backup/$DATE/
Funny thing now is that in the output of the script, the follow
On 22. May 2012, at 17:04 , Jack Vogel wrote:
> Oh, that's right, distracted with other projects and I forgot, now we just
> need
> to have an LRO that works with forwarding eh :)
That's a 6 line bainaid commit afterwards, basically returning form the LRO
queuing
function in case forwarding is
Thanks for the pointers and hints, I'm over that hurdle.
On 5/19/2012 5:28 PM, Warren Block wrote:
On Sat, 19 May 2012, Polytropon wrote:
3. The Xorg man page notes that should cause it to
exit. However, it doesn't, and I had to use kill -TERM. Any hints on
why doesn't cause it to exit?
Th
Oh, that's right, distracted with other projects and I forgot, now we just
need
to have an LRO that works with forwarding eh :)
You ROCK bz :)
Jack
On Tue, May 22, 2012 at 10:01 AM, Bjoern A. Zeeb wrote:
>
> On 22. May 2012, at 16:50 , Jack Vogel wrote:
>
> > The LRO code as it stands right n
On 22. May 2012, at 16:50 , Jack Vogel wrote:
> The LRO code as it stands right now is IPV4 specific, it would be nice to
> extend it, one of
> many improvements that may get done at some point.
I am about to commit it to HEAD. Bear another few days with me; I know
I am running late but committ
The LRO code as it stands right now is IPV4 specific, it would be nice to
extend it, one of
many improvements that may get done at some point.
Jack
On Tue, May 22, 2012 at 1:43 AM, Venkat Duvvuru
wrote:
> Folks,
> Could somebody please tell about the base Freebsd version which has LRO
> support
On Tue, May 22, 2012 at 6:31 PM, Chuck Swiger wrote:
> On May 22, 2012, at 6:05 AM, Odhiambo Washington wrote:
> > Can someone please tell me how to resolve the following multiplicity of
> > libraries, to ensure I only compile applications against a particular
> > library. I believe this emanates
On May 22, 2012, at 6:05 AM, Odhiambo Washington wrote:
> Can someone please tell me how to resolve the following multiplicity of
> libraries, to ensure I only compile applications against a particular
> library. I believe this emanates from my installing of openssl from the
> ports.
You could run
This doesn't answer your question but let me be the first to congratulate
you on your wisdom of not posting this to m...@openbsd.org ;-)
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubsc
Hi,
Can someone please tell me how to resolve the following multiplicity of
libraries, to ensure I only compile applications against a particular
library. I believe this emanates from my installing of openssl from the
ports.
FreeBSD 8.3-STABLE i386:
(15:58:10 <~>) 0 $ ls -al /usr/lib/libcrypt*
Jos Chrispijn writes:
> The content of this script (amongst others) is:
> rsync -avpog /etc /backup/$DATE/
>
> Funny thing now is that in the output of the script, the following appears:
> /root/cronjobs/do_daily.run: rsync: not found
>
> file credentials of the scr
On Tue, 22 May 2012 13:50:10 +0200
Jos Chrispijn wrote:
> I have this issue with running commands from a script:
>
> In my crontab I define script 'do_daily.run':
> 30 23 * * * root
> /root/cronjobs/do_daily.run
>
> The content of this script (amongst othe
I have this issue with running commands from a script:
In my crontab I define script 'do_daily.run':
30 23 * * * root
/root/cronjobs/do_daily.run
The content of this script (amongst others) is:
rsync -avpog /etc /backup/$DATE/
Funny
On Tue, 22 May 2012 13:42:56 +0900, JAEHO LEE wrote:
> Dear Sir,
>
> I would be a FreeBSD open source committer.
> But I don't know how to do.
> Could you teach me ?
Check out the FreeBSD home page, especially the article about
contributing to FreeBSD:
http://www.freebsd.org/doc/en_US.ISO8859-1/
Dear Sir,
I would be a FreeBSD open source committer.
But I don't know how to do.
Could you teach me ?
Best regards.
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail
2012-05-22 10:44, Polytropon skrev:
On Tue, 22 May 2012 10:17:16 +0200, Bernt Hansson wrote:
There is a second way of doing this stunt.
Start X
When X is up and running press CTRL+ALT+F3 or any F* frpm F3 up to F8
then you get to the console
Su to root in the console and type in
/usr/local/etc
On Tue, 22 May 2012 10:17:16 +0200, Bernt Hansson wrote:
> There is a second way of doing this stunt.
>
> Start X
> When X is up and running press CTRL+ALT+F3 or any F* frpm F3 up to F8
> then you get to the console
> Su to root in the console and type in
>
> /usr/local/etc/rc.d/dbus restart&&
Folks,
Could somebody please tell about the base Freebsd version which has LRO
support for IPv6?
I'm using 9.0-RELEASE and I see that tcp_lro_rx is failing.
Please confirm.
/Venkat
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/
012-05-20 14:17, C. P. Ghost skrev:
On Fri, May 18, 2012 at 2:27 PM, Bernt Hansson wrote:
2012-05-18 13:49, J. W. Ballantine skrev:
Hi,
Before the update of x11 on 4/21/2012, X was working fine, but now
when I startx, my usb and touchpad mouse are no longer found. The
mouse works in termina
54 matches
Mail list logo