Le 31/05/2012 ? 11:32:33-0400, Oscar Hodgson a écrit
> The subject is pretty much the question. Perhaps there's a better
> place to be asking this question ...
>
> We have (very briefly) discussed the possibility of using FreeBSD
> pizza boxes as a storage heads direct attached to external JBOD
2012-05-31 19:35, Jens Jahnke skrev:
Hi,
On Fri, 04 May 2012 14:12:17 +0200
"Hartmann, O." wrote:
HO> I found myself incapable of rebuilding/updating editors/libreoffice
HO> on ALL FreeBSD 9-STABLE and FreeBSD 10-CURRENT (amd64) platforms
HO> with the very same error message as shown belo
On 29 May 2012 20:06, wrote:
>
> Hello,
> I am moving away from MS products due to security a nd stability
> concerns. Below are the machines I use and would like to know which
> version of FreeBSD will work best with each. The computer s are used
> at home and away, for e-mail, prep
I built FrfeeBSD 9 with
WITHOUT_CLANG="Yes"
When I try to build the net/bwn-firmware-kmod/
I get an error that MK_CLANG_IS_CC is mis-formed.
If I define this in make.conf, I get an error that the user may not set
this.
If I use 'make MK_CLANG_IS_CC="no"' the port compiles.
How do I fix this
On Thu, 31 May 2012, Jens Schweikhardt wrote:
so I decided to try two HW technology advancements in one go.
I have a brand new shiny 1TB USB3.0 external disk, that when plugged
to an USB2(two!) reports
da5 at umass-sim2 bus 2 scbus6 target 0 lun 0
da5: Fixed Direct Access SCSI-2 device
On Fri, 1 Jun 2012, Victor Sudakov wrote:
Warren Block wrote:
I have installed 9.0-RELEASE on a SSD drive with the following
tweaking so far:
1. tmpmfs="YES" (WRKDIRPREFIX etc will go there too).
2. mount -o noatime
3. tunefs -t enable
I have not done any tricky partition alignment, do I r
On Thu, 2012-05-31 at 19:27 -0400, Daniel Staal wrote:
> --As of May 31, 2012 11:24:41 AM -0700, Dennis Glatting is alleged to have
> said:
>
> > 2) Under heavy I/O my systems freeze for a few seconds. I haven't looked
> > into why but they are completely unresponsive. Note I am also using
> > co
> From Gary Aitken :
> I've got an HP printer directly connected to the local network.
> hp-probe finds it:
> #hp-probe -bnet
> HP Linux Imaging and Printing System (ver. 3.12.2)
> Printer Discovery Utility ver. 4.1
> ...
> Device URI Model
--As of May 31, 2012 11:24:41 AM -0700, Dennis Glatting is alleged to have
said:
2) Under heavy I/O my systems freeze for a few seconds. I haven't looked
into why but they are completely unresponsive. Note I am also using
compressed volumes (gzip), which puts a substantual load on the kernel.
On Wed, 30 May 2012 18:18:25 +0100, Matthew Seaman wrote
> On 30/05/2012 17:57, Gene wrote:
> > I've been trying to install the port databases/mysql55-server, updating
from
> > the older 5.4 version. mysql55-client installed just fine. However, when
I
> > "make" the '-server' port I get the e
I've got an HP printer directly connected to the local network.
hp-probe finds it:
#hp-probe -bnet
HP Linux Imaging and Printing System (ver. 3.12.2)
Printer Discovery Utility ver. 4.1
...
Device URI Model
Name
--
On Thu, 31 May 2012 14:43:27 -0600, Gary Aitken wrote:
> On 05/31/12 12:56, Polytropon wrote:
> > Still, there _is_ a way of a workaround which is so ugly and
> > partially stupid that I fear to mention it.
> >
> > You need a cable, 2 x 3.5mm stereo jack, which you connect
> > from the front conne
On 05/31/12 09:57, Jens Schweikhardt wrote:
> so I decided to try two HW technology advancements in one go.
> I have a brand new shiny 1TB USB3.0 external disk, that when plugged
> to an USB2(two!) reports
> da5 at umass-sim2 bus 2 scbus6 target 0 lun 0
> da5: Fixed Direct Access SCSI-
On 05/31/12 12:56, Polytropon wrote:
> This functionality is not present on modern boards anymore.
> Also note it's not digital. It's analog. GND plus two
> channels. Audio transmission using the 40/80 pin (P)ATA
> cable would have been digital.
Thanks for the correction, I thought I knew that.
The thought never crossed my mind.
On Thu, May 31, 2012 at 1:28 PM, Damien Fleuriot wrote:
> As a side note and in case you were considering, I strongly advise against
> Linux + fuse ZFS.
___
freebsd-questions@freebsd.org mailing list
http://lists.free
On Thu, 31 May 2012 12:26:21 -0600, Gary Aitken wrote:
> On 05/31/12 05:54, Polytropon wrote:
> > On Thu, 31 May 2012 00:38:46 -0600, Gary Aitken wrote:
> >> The cd mounts a regular file system ok and audio generally works
> >> ok -- playing from a file works.
> >
> > You're sure it's a normal aud
On 05/31/12 09:57, Jens Schweikhardt wrote:
> so I decided to try two HW technology advancements in one go.
> I have a brand new shiny 1TB USB3.0 external disk, that when plugged
> to an USB2(two!) reports
>
> da5 at umass-sim2 bus 2 scbus6 target 0 lun 0
> da5: Fixed Direct Access SCS
On Thu, 31 May 2012, Kaya Saman wrote:
On Thu, May 31, 2012 at 5:05 PM, Oscar Hodgson wrote:
That helps. Thank you.
This is an academic departmental instructional / research environment.
We had a great relationship with Sun, they provided great
opportunities to put Solaris in front of stu
On Thu, 31 May 2012, Oscar Hodgson wrote:
That helps. Thank you.
This is an academic departmental instructional / research environment.
We had a great relationship with Sun, they provided great
opportunities to put Solaris in front of students. Oracle, not so
much, and the Oracle single-tie
On 05/31/12 05:54, Polytropon wrote:
> On Thu, 31 May 2012 00:38:46 -0600, Gary Aitken wrote:
>> The cd mounts a regular file system ok and audio generally works
>> ok -- playing from a file works.
>
> You're sure it's a normal audio CD? How actually is one supposed
> to mount audio CDs? They're _
On 31 May 2012, at 17:57, Jens Schweikhardt wrote:
> hello, world\n
>
> so I decided to try two HW technology advancements in one go.
> I have a brand new shiny 1TB USB3.0 external disk, that when plugged
> to an USB2(two!) reports
>
>da5 at umass-sim2 bus 2 scbus6 target 0 lun 0
>da5:
On Thu, 31 May 2012, Oscar Hodgson wrote:
The subject is pretty much the question. Perhaps there's a better
place to be asking this question ...
We have (very briefly) discussed the possibility of using FreeBSD
pizza boxes as a storage heads direct attached to external JBOD arrays
with ZFS.
I'm doing this with HP heads, LSI SAS adapters, and
http://www.dataonstorage.com/ JBODs.
Note: the DataOn JBODs are very, very hard to get right now because these
are really rebadged LSI devices and LSI sold this division to NetApp, who
promptly shut it down to prevent people like us from m
Hi,
On Fri, 04 May 2012 14:12:17 +0200
"Hartmann, O." wrote:
HO> I found myself incapable of rebuilding/updating editors/libreoffice
HO> on ALL FreeBSD 9-STABLE and FreeBSD 10-CURRENT (amd64) platforms
HO> with the very same error message as shown below.
I ran into the same issue on my 9-STABLE
On Thu, May 31, 2012 at 6:28 PM, Damien Fleuriot wrote:
> As a side note and in case you were considering, I strongly advise against
> Linux + fuse ZFS.
>
Yes I agree; as far as I understand ZFS in Linux is still in testing
and in any case not part of the Linux kernel which means dramatic
perfor
As a side note and in case you were considering, I strongly advise against
Linux + fuse ZFS.
On 31 May 2012, at 18:05, Oscar Hodgson wrote:
> That helps. Thank you.
>
> This is an academic departmental instructional / research environment.
> We had a great relationship with Sun, they provide
Warren Block wrote:
> >
> > I have installed 9.0-RELEASE on a SSD drive with the following
> > tweaking so far:
> >
> > 1. tmpmfs="YES" (WRKDIRPREFIX etc will go there too).
> >
> > 2. mount -o noatime
> >
> > 3. tunefs -t enable
> >
> > I have not done any tricky partition alignment, do I really n
On Thu, May 31, 2012 at 5:05 PM, Oscar Hodgson wrote:
> That helps. Thank you.
>
> This is an academic departmental instructional / research environment.
> We had a great relationship with Sun, they provided great
> opportunities to put Solaris in front of students. Oracle, not so
> much, and t
That helps. Thank you.
This is an academic departmental instructional / research environment.
We had a great relationship with Sun, they provided great
opportunities to put Solaris in front of students. Oracle, not so
much, and the Oracle single-tier support model simply isn't affordable
for th
On Thursday, May 31, 2012 11:11:11 am Mark Felder wrote:
> So when this hang happens, there never is a real panic. It just sits in a
> state which I describe as like being in a deadlock. How would I go about
> getting a crashdump if it never panics? Is it possible to do the dump over
> a netw
hello, world\n
so I decided to try two HW technology advancements in one go.
I have a brand new shiny 1TB USB3.0 external disk, that when plugged
to an USB2(two!) reports
da5 at umass-sim2 bus 2 scbus6 target 0 lun 0
da5: Fixed Direct Access SCSI-2 device
da5: 40.000MB/s transfers
If this is any consellation I run a 36TB cluster using a self built
server with a Promise DAS (VessJBOD 1840) using ZFS at home! to
support my OpenSource projects and personal files.
As for OS take your pick: NexentaStor, FreeBSD, Solaris 11
All capable, of course Solaris has latest version of Z
The subject is pretty much the question. Perhaps there's a better
place to be asking this question ...
We have (very briefly) discussed the possibility of using FreeBSD
pizza boxes as a storage heads direct attached to external JBOD arrays
with ZFS. In perusing the list, I haven't stumbled acros
So when this hang happens, there never is a real panic. It just sits in a
state which I describe as like being in a deadlock. How would I go about
getting a crashdump if it never panics? Is it possible to do the dump over
a network or something because I don't believe it can write through the
Hi,
it's not really about the machines but more the hardware.
FreeBSD is quite diverse in what it can run on so best bet check the
HCL's off the www.freebsd.org website as that would give you the best
idea!
Otherwise just install and see what works and doesn't. FreeBSD is
pretty comprehensive of
On Wednesday, May 30, 2012 3:56:02 pm Mark Felder wrote:
> On Wed, 30 May 2012 12:17:07 -0500, John Baldwin wrote:
>
> >
> > Humm, can you test it with 2 CPUs?
> >
>
> We primarily only run with 1 CPU. We have seen it crash on multiple CPU
> VMs. Also, Dane Foster appeared to have been using m
Hi,
I'm trying to install FreeBSD9 (64bit) on a HP Proliant server
(ProLiant DL385 G1). Installation is done via remote-management
("iLO") basically by mounting the Installation-ISO.
However a couple of seconds after booting the box crashes.
Here's what I tried already:
o) Re-download the ins
On Thu, 31 May 2012, Polytropon wrote:
On Thu, 31 May 2012 14:19:33 +0400, dmi...@zhigulinet.ru wrote:
Good afternoon.
Could not tell whether you can run fsck on checking mounted
file system as read-only, if prior to that with which the parameters
ftp # mount
...
/ dev/aacd0 on / var / ftp (u
On Thu, 31 May 2012, Victor Sudakov wrote:
Colleagues,
I have installed 9.0-RELEASE on a SSD drive with the following
tweaking so far:
1. tmpmfs="YES" (WRKDIRPREFIX etc will go there too).
2. mount -o noatime
3. tunefs -t enable
I have not done any tricky partition alignment, do I really ne
On 5/31/2012 12:19 PM, dmi...@zhigulinet.ru wrote:
Good afternoon.
Could not tell whether you can run fsck on checking mounted file system as
read-only, if prior to that with which the parameters
ftp # mount
...
/ dev/aacd0 on / var / ftp (ufs, NFS exported, local, read-only)
Could you copy
On Thu, 31 May 2012 00:38:46 -0600, Gary Aitken wrote:
> The cd mounts a regular file system ok and audio generally works
> ok -- playing from a file works.
You're sure it's a normal audio CD? How actually is one supposed
to mount audio CDs? They're _audio_ CD format, no ISO-9660 file
system on th
On Thu, 31 May 2012 14:19:33 +0400, dmi...@zhigulinet.ru wrote:
> Good afternoon.
> Could not tell whether you can run fsck on checking mounted
> file system as read-only, if prior to that with which the parameters
>
>
> ftp # mount
> ...
> / dev/aacd0 on / var / ftp (ufs, NFS exported, local, re
Good afternoon.
Could not tell whether you can run fsck on checking mounted file system as
read-only, if prior to that with which the parameters
ftp # mount
...
/ dev/aacd0 on / var / ftp (ufs, NFS exported, local, read-only)
Launched with these parameters and this is what gives
ftp # fsck -yf
> freebsd-questions-owner@... is correct, except that to my knowledge
> there isn't really a moderator for freebsd-questions (it's an open list
> that anyone can post to without having to be a member) and that address
> ultimately gets dealt with by postmas...@freebsd.org.
> The message you got ab
On Thu, May 31, 2012 at 09:47:06AM +0100, Anton Shterenlikht wrote:
> On Wed, May 30, 2012 at 01:40:00PM +0100, Anton Shterenlikht wrote:
> > On Wed, May 30, 2012 at 01:08:07PM +0200, uki wrote:
> > > Did you try to hg clone -U and than update?
> > >
> > > Mozilla repo is quite big, and that _migh
On Wed, May 30, 2012 at 01:40:00PM +0100, Anton Shterenlikht wrote:
> On Wed, May 30, 2012 at 01:08:07PM +0200, uki wrote:
> > Did you try to hg clone -U and than update?
> >
> > Mozilla repo is quite big, and that _might_ be the reason, splitting
> > the work in 2 parts will help if that was the
On Thu, May 31, 2012 at 8:43 AM, Waitman Gobble wrote:
> On Wed, May 30, 2012 at 11:26 PM, Waitman Gobble wrote:
>
>>
>>
>> On Mon, May 28, 2012 at 10:25 AM, Waitman Gobble wrote:
>>
>>>
>>>
>>> On Mon, May 28, 2012 at 7:42 AM, Warren Block wrote:
>>>
On Sun, 27 May 2012, Waitman Gobble wrot
47 matches
Mail list logo
