On 14/06/2012 08:40, Matthew Seaman wrote:
Really? If I said the bandwidth usage was 10Mb/s would you immediately
understand that was 10,000,000,000 bits per second?
Err... of course you wouldn't. 10,000,000 bits per second. That's what
I meant to type.
Matthew
--
Dr Matthew J
On Tue, Jun 5, 2012 at 8:19 PM, Kurt Buff kurt.b...@gmail.com wrote:
UEFI considerations drive Fedora to pay MSFT to sign their kernel binaries
http://cwonline.computerworld.com/t/8035515/1292406/565573/0/
This would seem to make compiling from source difficult.
Kurt
I'm not sure I
On Sun, Jun 10, 2012 at 7:04 AM, Subhro Sankha Kar sub...@80386.org wrote:
Hello,
Looks like you have missed out something related to ATA in the kernel
configuration file. Can you post your complete kernel config?
Hi,
I'm just using the GENERIC config on amd64, as of r235604. Nothing
On Thu, 14 Jun 2012 08:40:27 +0100, Matthew Seaman wrote:
On 14/06/2012 07:11, Polytropon wrote:
Even school taught that in the 80's: When dealing with
computers, 1 kB != 1000 B, but 1 kB = 1024 B. That is
considered basic knowledge.
Schools teach a lot of things that are so glossed over
On 13/06/2012 19:34, Simon wrote:
Hi,
I upgrade to FreeBSD 8.3-p3 and installed MySQL 5.0.95 from ports.
It runs fine until it dies silently. Does anyone run a heavy loaded MySQL
under such setup? how can I troubleshoot this?
I could never compile a stable MySQL server from the ports and
Hi is there any update on this? I would like to be able to run FreeBSD MIPS
and I don't have a MIPS box!
You wrote:
On Tue, May 15, 2012 at 10:06 AM, Adrian Chadd adr...@freebsd.org wrote:
The short answer is yes - I've seen this. I've not done it myself
though, I've just acquired cheap
When one recives the
FreeBSD Errata Notice or
FreeBSD Security Advisory
The instruction is to do:
# freebsd-update fetch
# freebsd-update install
From earlier discussions on this list about the -px number not
changing, I usually rebuild and install the kernel.
My question is:
Do I
When I do
freebsd-update install
I get this error:
Installing updates...install: ///usr/src/lib/libc/gen/libc_dlopen.c: No
such file or directory
I think it's because I do not have all sources installed. So I just want
to confirm that it's the case.
Also, should I care and install the
On 14/06/2012 10:41, Leslie Jensen wrote:
When one recives the
FreeBSD Errata Notice or
FreeBSD Security Advisory
The instruction is to do:
# freebsd-update fetch
# freebsd-update install
From earlier discussions on this list about the -px number not changing,
I usually
On 14/06/2012 10:45, Leslie Jensen wrote:
When I do
freebsd-update install
I get this error:
Installing updates...install: ///usr/src/lib/libc/gen/libc_dlopen.c: No
such file or directory
I think it's because I do not have all sources installed. So I just want
to confirm that it's
2012-06-14 12:18, Matthew Seaman skrev:
On 14/06/2012 10:45, Leslie Jensen wrote:
When I do
freebsd-update install
I get this error:
Installing updates...install: ///usr/src/lib/libc/gen/libc_dlopen.c: No
such file or directory
I think it's because I do not have all sources installed. So
Hello,
I need to order a few more servers for an internal project, and instead
of the usual DL360G7 we now use without any problem with FreeBSD, there
would now be the next generation, called Gen8.
Intel® C600 Series Chipset
Intel® E5-2600 Processor Family
Storage Controller : HP Smart Array
Polytropon wrote:
On Wed, 13 Jun 2012 22:26:16 -0600, Gary Aitken wrote:
I can understand why I would see activity on a USB device
when it's first plugged in. But why do I see continued
activity (i.e. the light blinks on a usb disk or memory stick)?
When I umount one of these, they keep
Reply inline...
On Thu, Jun 14, 2012 at 6:41 AM, Olivier Mueller om-lists-...@omx.ch wrote:
Hello,
I need to order a few more servers for an internal project, and instead
of the usual DL360G7 we now use without any problem with FreeBSD, there
would now be the next generation, called Gen8.
Should I install the libc souces?
I had this error when upgrading 8.x (8.1 to 8.2?), and solved it by creating
the directory only (actual sources not required). I recall someone had
posted this solution to the list at the time.
Regards,
Dale
___
On Thursday 14 June 2012 07:05:11 Polytropon wrote:
I don't think that's a problem. I've got a USB stick here
that has a blinkenlight as soon as it's powered on (plugged
in), even if there is no reading / writing / mounting activity.
After you've successfully performed umount, the USB stick
On 06/13/2012 11:49 PM, Wojciech Puchar wrote:
trying to start openoffice shows:
[wojtek@wojtek ~]$ openoffice-3.4.0-swriter
XDM authorization key matches an existing
client!/usr/local/openoffice-3.4.0/openoffice.org3/program/soffice.bin
X11 error: Can't open display:
Set DISPLAY
On Thu, 14 Jun 2012, Mike Clarke wrote:
On Thursday 14 June 2012 07:05:11 Polytropon wrote:
I don't think that's a problem. I've got a USB stick here
that has a blinkenlight as soon as it's powered on (plugged
in), even if there is no reading / writing / mounting activity.
After you've
On Thu, 14 Jun 2012 09:04:26 +0100, Paul Macdonald wrote:
On 13/06/2012 19:34, Simon wrote:
Hi,
I upgrade to FreeBSD 8.3-p3 and installed MySQL 5.0.95 from ports.
It runs fine until it dies silently. Does anyone run a heavy loaded MySQL
under such setup? how can I troubleshoot this?
I
On Thu, 14 Jun 2012 09:49:00 -0400 (EDT), Daniel Feenberg wrote:
Is it possible that there is volitile memory buffering in the stick that
may not have been written to flash when umount thinks it is complete, and
the flashing light is an indication that power is still required to
complete
Thanks, it looks like I had a copy from May in there that was fairly
accurate!
On Jun 13, 2012 5:03 PM, Warren Block wbl...@wonkity.com wrote:
On Wed, 13 Jun 2012, Eitan Adler wrote:
On 12 June 2012 18:03, William Orr w...@worrbase.com wrote:
Hello,
I had a hard disk failure some time
On Thursday 14 June 2012 15:45:46 Polytropon wrote:
However, as you said
it might be possible that _inside_ the USB stick there is
still an action that needs to be performed and therefore
requires power.
That's a possibility.
But I doubt this takes several seconds to
complete...
I've
Hi,
Reference:
From: C. P. Ghost cpgh...@cordula.ws
Date: Thu, 14 Jun 2012 09:51:46 +0200
Message-id:
CADGWnjW2LnrtOiXFzWFk9btMaeJhmOTxdZ7ScymY=qgme_c...@mail.gmail.com
C. P. Ghost wrote:
On Tue, Jun 5, 2012 at 8:19 PM, Kurt Buff kurt.b...@gmail.com wrote:
UEFI
Hello,
I have an old SB Live! card with a 5.1 speaker set, but i can't get
sound from center and rear speakers with mplayer.
I'm using the snd_emu10kx driver and when I try to play a DVD I get
sound only through the front speakers (and LFE) like a 2.1
Adding -channels 6 to the mplayer args
In freebsd-questions Digest, Vol 419, Issue 9, Message: 2
On Wed, 13 Jun 2012 10:33:49 -0400
Lynn Steven Killingsworth blue.seahorse.syndic...@gmail.com wrote:
This is the fourth time I have installed FreeBSD while learning the in's and
out's. I have a new mainboard this time (ASUS M5A97 EVO
grarpamp writes:
Plenty of millionaires
out there now who are in tune with opensource who could startup,
buy the same ARM/ATOM/etc chips, the same support chips, load
Android and sell it to the masses.
Would you please post a list of these millionaire FLOSS entrepreneurs?
Thank you.
If you read Fedora's page they were planning to tighten their boot
sequence to then only boot their approved binary kernels.
Save your old copies of lilo and grub. You're gonna need them if you want to
stay on Intel Mafioso hardware.
Risk of key revocation later
If hardware
Hello.
2012/06/14 00:23:25 +0400 Peter Vereshagin pe...@vereshagin.org = To
freebsd-questions@freebsd.org:
PV ot the least how could I see the 'real' size of each of those files, both
~150M
PV actulally, with a system command?
also, 'du' works that way for regular files. But implicitly I
On Thu, 14 Jun 2012, David Demelier wrote:
I have an old SB Live! card with a 5.1 speaker set, but i can't get
sound from center and rear speakers with mplayer.
I'm using the snd_emu10kx driver and when I try to play a DVD I get
sound only through the front speakers (and LFE) like a 2.1
On Thu, Jun 14, 2012 at 12:37 PM, Peter Vereshagin pe...@vereshagin.org wrote:
Hello.
2012/06/14 00:23:25 +0400 Peter Vereshagin pe...@vereshagin.org = To
freebsd-questions@freebsd.org:
PV ot the least how could I see the 'real' size of each of those files, both
~150M
PV actulally, with
Pour afficher correctem= ent la page [1]Cliquez-ici
Pour = Devenir Partenaire [2]Cliq= uez-ici
[3]3DPV4_NEWSLETTER_SOLAIRE_PV4_CAVAILLON_CN2i_DEVELOPPEMENT_MARS_20
Pour Dev= enir Partenaire [4]Cliq= uez-ici
Michael FRAYSSE ?n= bsp;Direction ? CN2i DEVELOPPEMENT
Site Web
On Sat, Jun 9, 2012 at 12:17 AM, grarpamp grarp...@gmail.com wrote:
I did say effectively. If people would actually read that chapter
in the spec (minimally 27.5) they would find that they can:
- Load a new PK without asking if in default SetupMode
- If not in SetupMode, chainload a new PK
I still have non-root access to a box from my old job... it is
non-available and doing nothing, so updates are irrelevant:
%uptime
9:01PM up 1142 days, 5:29, 1 user, load averages: 0.00, 0.00, 0.00
Steve
___
freebsd-questions@freebsd.org mailing
In production and survived many area-wide power outages:
% uptime
10:34PM up 2021 days, 18:02, 1 user, load averages: 0.00, 0.00, 0.00
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To
On 14/06/2012 9:20 PM, Steve Bertrand wrote:
I still have non-root access to a box from my old job... it is
non-available and doing nothing, so updates are irrelevant:
%uptime
9:01PM up 1142 days, 5:29, 1 user, load averages: 0.00, 0.00, 0.00
fwiw:
%uname -a
FreeBSD ..xxx
On 14/06/2012 9:35 PM, Mark Felder wrote:
In production and survived many area-wide power outages:
% uptime
10:34PM up 2021 days, 18:02, 1 user, load averages: 0.00, 0.00, 0.00
That's hardcore homie... wow!
What does this box survive to do?
Steve
On 06/14/2012 09:03 AM, David Demelier wrote:
I have an old SB Live! card with a 5.1 speaker set, but i can't get
sound from center and rear speakers with mplayer.
I'm using the snd_emu10kx driver and when I try to play a DVD I get
sound only through the front speakers (and LFE) like a 2.1
On Thu, 14 Jun 2012 22:37:59 -0500, Steve Bertrand
steve.bertr...@gmail.com wrote:
That's hardcore homie... wow!
What does this box survive to do?
Transparent traffic shaping/firewalling via IPFW; it's not actually
visible to the internet. There isn't much load at all, but the hardware
FreeBSD REDACTED 6.0-RELEASE FreeBSD 6.0-RELEASE #0: Wed Nov 15 16:29:10
CST 2006 root@REDACTED:/usr/src/sys/i386/compile/IPFW-POLING-ALTQ i386
Theres no way I'm giving out the organization name or hostname haha. We're
slowly moving customers away from this device, but not forcing anyone.
On 14/06/2012 9:43 PM, Mark Felder wrote:
On Thu, 14 Jun 2012 22:37:59 -0500, Steve Bertrand
steve.bertr...@gmail.com wrote:
That's hardcore homie... wow!
What does this box survive to do?
Transparent traffic shaping/firewalling via IPFW; it's not actually
visible to the internet. There
The following creates a file with a size of 102402 (a gig)
fseek(stdout, 100*1024, SEEK_END);
Nope :) What you have there is not actually called (anything).
It would maybe be called a MKiB. :-)
I'll buy that, if someone chips in the deuce :)
In SI units it is called a gigabyte.
41 matches
Mail list logo