Pardon if this is a bit off topic, but here it goes...
I have a couier-mta system that is running nicely on my 4.9 box, and I
wanted to add some server side mailfilter for some of my email (like put
mail from this list into a specific folder automatically).
I enabled maildrop in courierd, but I
I was finally able to upgrade to gnome 2.6 on my 5.2 system.
When finished, I fired up Evolution and it came up, but with
no fonts. I tried a basic portupgrade of evo to accomodate
the changes, but afterwards, evo wouldn't even load. Trying
the old fashioned method, I did a make
I was finally able to upgrade to gnome 2.6 on my 5.2 system.
When finished, I fired up Evolution and it came up, but with no fonts. I
tried a basic portupgrade of evo to accomodate the changes, but afterwards,
evo wouldn't even load. Trying the old fashioned method, I did a make
deinstall
/usr/libexec/ld-elf.so.1: Shared object libc_r.so.4 not found
/usr/libexec/ld-elf.so.1: Shared object libc_r.so.4 not found
which leads me to believe I am missing a dependant install.
I looked
at the dependancies and I thought I saw them all listed under
pkg_info, so I would
/usr/libexec/ld-elf.so.1: Shared object libc_r.so.4 not found
/usr/libexec/ld-elf.so.1: Shared object libc_r.so.4 not found
this sounds like your openoffice package was built on freebsd 4.x.
on freebsd 5.2 libc_r version is 5 (libc_r.so.5). you might
try to install the compat4x
Hi all,
I installed Apache 2 from the ports collection. Does apache2
come with php support? Probably not, but not sure. I want to
install php on the system. I'm not sure what port I need to
install?? All the pre recks..
are for 1.* versions of Apache. What's the deal?
I recommend
snip
FWIW, none of my new systems have floppies and the smallest
has 3 x 40GB HDs. The new HDs all run ATA-133 and have 8MB of
cache. I have about 40GB of mp3 and wma that I have created
from CDs that I own and backup on one of the 2400's. It isn't
the one with the 3-40's :). None of
I'm finished the config section; but now am pointing lynx
at the html docs. This is probably a case where I need to
be patient and RTFM. --Or really, print out the docs and
go in a quiet corner since reading online gives me problems.
One thing you can help me
I have an XP/FreeBSD 5.x dual boot machine that has been running fine for
6mos which I had to power down last week. It had been booted to XP and I
did a normal clean shutdown, but now my XP system is hosed. After using BSD
to backup data, I tried a normal install to redo the partition, but
I am looking for a way to further secure a mail server. It isn't an open
rely, but when others try to use it as such with bad return addresses, a
small flood of rejection mail end up on the bad addressed server.
Ex.
To: [EMAIL PROTECTED]
From: [EMAIL PROTECTED]
hotmail ends up with a ton of
D Ex.
D To: [EMAIL PROTECTED]
D From: [EMAIL PROTECTED]
D hotmail ends up with a ton of bounce msgs
Bounces are a normal part of email life.
D and thinks the server is a relay.
No they don't. Email admims look at the last sender IP
address in the headers, which is the only
I think I figured it out. The qmail-smtpd.c patch for SMTP AUTH had an
exploit. It did require authentications, but it didn't care what
credentials you threw at it, so long as you sent something.
On that note, does anyone know of a way to get SMTP AUTH working with
qmail without being an
I really need to know if my HP Deskjet 5150 works with
freebsd, if not, i have to change it in 3 days, please help me!
I've configured cups like it said in www.freebsddiary.org,
with a difference, i dont have a compatible browser to
What browser are you trying? I have had success
while recently cvsup'ing my box here at home, i had a weird
thing happen...
i had already built world, built and installed the kernel,
installed world (including all
appropriate reboots), and when i brought it back up, but
prior to running mergemaster, i
popped the jumper on the
I don't know. I've never had to change away from Auto to
get any other OS
to install or boot from any of my hard drives, though, so I
really doubt
that is the problem. I'm quite confident the problem must
lie with FreeBSD
itself, in the form of a bug or a lack of hardware
I searched your site, but my burning question is, How
do I start the Graphical Interfaces, KDE and Gnome? I
did a Custom Installation following the directions of
the website. I installed all the packages and Ports. I
want to learn everything.
I don't know about gnome but for
I am trying to install the openoffice 1.1 port and i fails
because I have gettext 0.13 insaltted due to dependencies.
OpenOffice tells me that it needs gettext 0.12 iin order to
install. What is the best way for me to deal with this?
Install the prebuild binary instead (saves a ton
I have just finished installing FreeBSD v 4.9. I have
searched numerous
archives but still have not found the answers on how to configure my
server to work with Verizon DSL. Could somebody please help
or push me
in the right direction. Your help is greatly appreciated.
When I was
Hi,
I'm in the process of buying a new pc and was wondering what
would be a good sound card and a video card that i could use
with FreeBSD.Do the RivaTNT or GEForce chipsets work well
with freebsd.I ask this question 'cos i want both the cards
to be as compatible and as easy to install
I have a 4.9 router that I decided I want to have a meaningful firewall
with, so I have modified a copy of rc.firewall and would like someone to
point out if I am doing something monumentally stupid.
I want to allow all from within my network, but only let in a few from
the internet:
DNS
Greetings,
I am running 5.1-release. I created the file
/var/cron/tabs/root . It is owner root, group wheel.
permissions are -rw---
I have the following entry in the file root
0 22 2-31 * * /usr/local/bin/rsync -av /dept2/Marketing/
/data/Marketing
21 /r
oot/rsync.log
Of
Greetings,
I have a box with 5.1-release on it. I had it configured and
connected to my lan. The connection was to a switch.
ifconfig -a showed it as autosense. All was well with the
world. Relocated this box to another building (same lan).
It is connected to a 10/100 hub.
I'm having a hell of a time getting XP Pro and 4.9 on the
same drive. I've tried various ways to get them to co-exist
to no avail. Here's what I'm trying to accomplish;
30 GB HD total
First 24 GB = XP
Last 6 GB = 4.9
Installed XP first, then 4.9, said NONE at the boot menu
I have been trying to get a working mysql daemon that allows connections
from remote hosts. I can connect via local host just fine, but any time
I try from my XP desktop via command center (or another remote client),
I get this error immediately:
ERROR 2013: Lost connection to MySQL server
I upgraded my server from FreeBSD 4.6.2 to version 4.8. After
this, my passwd file was empty and my master.passwd was gone!
I have a backup of these files and now I need to rebuild my
users database. Is there a way to do this from my old files?
I also need them for my SMB network.
When I login, I get a UNIX tip by Dru, printed on the screen.
I'd like
to turn that off, but haven't located where to do that ... TIA.
-ste
Check the .xxxrc file for your shell. I bet that one of the last lines
fires off the program that gives you that output. For a bash shell,
I have a port redirect, public port 5001 to an internal machine port 3389,
for Remote Desktop that works well in natd as long as I don't fire up my
custom firewall:
0005023427286 divert 8668 ip from any to any via sis0
00100 24 6080 allow ip from any to any via lo0
00200 0
Hi all,
I searched the archives and documents on bash, but I can't figure out
how to put the hostname of the workstation I am on before the
$ of the
shell/command line. Does anyone know how to add the hostname
(preferably the first part - i.e. www, db1, etc) to the
command line for
Curious how FreeBSD ffs performs in Enterprise-level
environments (ie:
email stores that send 100's of thousands of messages per
day) versus
other filesystems like XFS (I heard thre's a port going on for
FreeBSD..?), ReiserFS, et al. Is there a FAQ that covers
some of this
and
Hi,
I have followed the install from freebsd.qmailrocks.org,
and everything appears to be going OK, I'm almost done with
the guy's walk-thru...but I found something of interest on
the qmail.org website - patches to do smtp-auth so I can have
my clients be able to 'roam' while being
I've tried lynx, but it did not display the files.
I tried emacs, but I was only able to rename two of the
directories to other names I could delete; the other two gave
me an error of illegal character. I tried 'rm -i -- ?*' but
it didn't find the files. I tried 'find . -inum 146
On Tue, 16 Mar 2004 13:59:24 +
Matthew Seaman [EMAIL PROTECTED] wrote:
On Tue, Mar 16, 2004 at 09:39:07AM +0500, Asghar Ali wrote:
Anyone have the complete list of freebsd 5.2 commands. I
need it so
please send to me on my mail address [EMAIL PROTECTED]
What you ask
Robert Storey wrote:
Dear all,
Having looked at the mind-boggling amount of configuration
information
that is in the Handbook, I decided to just install CUPS. I'm very
familiar with CUPS, having configured it many times in Linux.
So I installed the CUPS daemon, and started it
I am trying to write a little program that will talk to my existing mysql db
server (4.1.1), but am having compile issues.
The code is:
#include stdio.h
#include mysql.h
#define HOST localhost
#define USERNAME test
#define PASSWORD test
#define DB pollphp
MYSQL *conn;
int main()
{
In the last episode (Apr 20), Derrick Ryalls said:
I am trying to write a little program that will talk to my existing
mysql db server (4.1.1), but am having compile issues.
You need -I/usr/local/include/mysql on your compile line, and
-L/usr/local/lib/mysql on your link line
I have been using FreeBSD as a server via console for a while now, but I
wanted to see what the GUI was like. My only spare machine right now is
a P-300 w/ about 16meg ram, so I won't be screaming along, but I wanted
to start the process anyway. I was looking through the ports, and I see
a ton
Unless your friend encrypted his data, he shouldn't need a password
cracker. By encrypt, I mean the XP built in encrypt per user method
under advanced properties. In that case, then only the password will
save the data. If the data is just sitting there on the NTFS drive,
recovery can be easy:
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]] On Behalf Of Brian Astill
Sent: Thursday, January 02, 2003 4:29 PM
To: [EMAIL PROTECTED]
Subject: Sendmail waiting?
My silly system ... Using 4.6 RELEASE, 1.1G Athlon ABit KT7A VIA
chipset - running
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]] On Behalf Of mike
Sent: Thursday, January 02, 2003 5:04 PM
To: [EMAIL PROTECTED]
Subject: Shell guru needed.
Hey guys. heres the skinny. I have a huge library and i want
to organize it. I want find to go
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]] On Behalf Of
[EMAIL PROTECTED]
Sent: Sunday, January 05, 2003 3:55 PM
To: [EMAIL PROTECTED]
Subject: Internal mail server
Here is my problem:
I have a lab with students that is going to be taught
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]] On Behalf Of
Wiroth Didier
Sent: Monday, January 06, 2003 2:21 PM
To: [EMAIL PROTECTED]
Subject: how to make bind listen only to 127.0.0.1
Hey,
I would like to run bind as a caching only server (v 8.3.3
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]] On Behalf Of G D McKee
Sent: Saturday, January 18, 2003 4:51 AM
To: Freebsd-Questions@Freebsd. Org (E-mail)
Subject: DHCPD 3 R11 Config Errors
Hi
recompiled dhcpd r11 today and thought my old config file
Shell: /usr/local/cpanel/bin/noshell not executable!
Enter username [a-z0-9_-]:
%man vipw
look for the lines starting with the applicable usernames, change the
last part from (presumably) /usr/local/cpanel/bin/noshell to /bin/csh
btw, it looks like you didn't fully delete cpanel, otherwise
I played with Cups about a month ago, here are my thoughts
I've done a fresh cvsup of the ports system this morning to
get the latest parts of the CUPS system.
make and make install went fine and I have launched the cupsd
via /usr/local/etc/rc.d/cups.sh start
Problems start occurring
Just about everything woking in cups now except I'm unable to
configure a printer via web interface. The browswer reports:
Admin
Error:
server-error-service-unavailable
The error log says:
I [03/Feb/2003:22:33:23 -0600] Started
can somebody explain to me how to create a .htpasswd
password? I dont want to use online password generators.
http://httpd.apache.org/docs-2.0/howto/auth.html
___
[EMAIL PROTECTED] mailing list
On Sun, 13 Jul 2003 23:18:36 -0700, Derrick Ryalls wrote
can somebody explain to me how to create a .htpasswd
password? I dont want to use online password generators.
http://httpd.apache.org/docs-2.0/howto/auth.html
okay thanks,
OS: FreeBSD 4.8
Apache: 1.3.27
but I
I hope this isn't to broad of a question, but I just
installed Apache13 on my box (FreeBSD 5.1) the build went
like butter... but can't start the server? #
/usr/local/sbin/apachectl start: httpd could not be started
Is the error I get. The httpd.conf file is all set I think,
as far
I can't get FreeBSD to print to the the network PrintServer
W2K machines do fine. FreeBSD sends the jobs, but they just
... disappear ?
Printing to a W2K machine with a printer on its LP1 port work fine,
under printcap control, but not to the PrintServer?
I recommend using apsfilter.
On Sat, 19 Jul 2003 at 07:58:05 +0200, P. U. Kruppa wrote:
Hi!
I am trying to set up a printer server
(SAMBA 2.2.8 package on 4.8 -RELEASE, printer is a Kyocera
FS-3700+ laser printer) which should be accessible from Win2000
and WinNT4 workstations _without_ any
I bought a domain for my gaming clan and installed bind9 specifically
for the views feature. The DNS machine is my home router and our gaming
machine is on another network and physically 60 miles away and is nat'ed
on a lan. The lan the game server is on has it's own DNS machine, but
is located
On Thu, Jul 24, 2003 at 03:02:15PM -0700, Derrick Ryalls wrote:
I bought a domain for my gaming clan and installed bind9
specifically
for the views feature. The DNS machine is my home router and our
gaming machine is on another network and physically 60
miles away and
is nat'ed
I updated the mod_php4 port, but it only has the files:
Makefile
pkg-message
I can´t install it... where are the other files from this
port? The mod_php3 port is fine, but I need mod_php4!
What should I do?
Oddly enough, I recently installed mod_php4 and looking back, the
directory
Hi there,
Using nat on my gateway to forward traffic on many ports the same
internal machine, what is the correct syntax?
redirect_port x.x.x.x zz zz
redirect_port x.x.x.x yy yy
redirect_port x x x x nn nn
Copied from my natd.conf
redirect_port tcp 192.168.0.20:22 5520
Hi,
I am running freebsd 4.8 stable, and have cups installed.
# pkg_info | grep cups
cups-1.1.19.0 The Common UNIX Printing System: Metaport
to install
comple
cups-base-1.1.19.0 The Common UNIX Printing System: headers,
libs, daemons
cups-lpr-1.1.19.0 The CUPS BSD and
should it be in the ports directory when running
pkg_add? like usr/ports/security/packge
say the package is in the security category
or its ok to run in in my home directory or should it
be in ports directory?
pkg_add can be run from anywhere, and the file.tgz can reside
Hi everybody.
Got a problem with my desktop running FreeBSD 5.1, hanging on
boot. Connected to Internet via adsl and a FreeBSD 4.8 NAT
Gateway-box.
uname -a
FreeBSD thor.swedehost.com 5.1-RELEASE FreeBSD 5.1-RELEASE
#0: Sat Jul 26 16:35:38 CEST 2003
[EMAIL
What I need to change on a PC with FreeBSD4.8 with 2 NICs, so
that for Win computers must see each other on different
subnets - 192.168.1/24 and 192.168.2/24? I want Win clients
to be just like they are on a Win network? Or maybe i must do
anything on those Win machines?
Need more info.
Does anyone know of any utility to discover the hardware specs of a
freebsd host?
dmesg has lost the initial boot information and the box was booted
ages ago so the startup messages have been lost with messages file
rotation it seems.
%more /usr/var/run/dmesg.boot
i'm running FreeBSD 4.8 on one of my machines. i'm having a
really frustrating problem. i cannot connec to anything
outside of the interface.
Is it giving any error msg?
If it says no route to host, you need to setup a default route, but I
doubt this is the issue.
i've quarduple
On Wed, 2003-08-06 at 10:06, Darryl Hoar wrote:
Greetings,
I want to setup a personal email server for my domain
on my frebsd 4.7S box. I've heard great things about
qmail. This lead me to wonder about smtp authentication
with qmail as I think that would eliminate the open relay
problem.
On Thu, 2003-08-07 at 13:00, mess-mate wrote:
Hi list,
how can I configure cups as my favorite printer system ?
thanks
mess-mate
www.freebsddiary.org has a lot of good step by step resources, cups is
one of them.
http://www.freebsddiary.org/cups.php
Hi (again)
I recently bought a brother 5050 laser (postscript level 3).
Connected it via
usb, configured cups to use it. And it worked like a charm.
However, now I
discover that It doesnt work unless the printer is powered on (not in
standby) when the computer boots. If I power it on
If I have a user that has a nologin shell and they forget thier
password, is there a way to give them a new password?
Right now I am resetting their password to nil, then
giving them a shell like /bin/sh, logging in on their
behalf, setting
up a password, and then changing their
I am seeing a lot of the following in my logs on a freshly installed
system:
Sep 2 09:01:39 bridge /kernel: usb0: scheduling overrun
I am running 4.9-PRERELEASE. The really strange this is I
have the following in my rc.conf so I should never even be
getting these errors:
Differences -
Old Architecture:
Shuttle AI61 motherboard
AMD K7 CPU Processor 900 Mhz
AMD751 Chipset
3 DIMM Sockets
New Architecture:
Shuttle AK32A motherboard
AMD Athlon CPU 1.5 GHz
Chipset(s) - 2: VIA VT8366A VIA VT8233
I run 4.8, but here are my suggestions:
The final question I have is one that's probably obscure. I
remember a switch used to tell the dhcp client to send the
host name of the laptop to a dhcp server. While it gets a
man dhclient.conf
lease perfectly fine, opening up my linksys dhcp
put this minimal snmpd.conf in /usr/local/share/snmpd.conf:
***
syslocation your localtion
syscontact [EMAIL PROTECTED]
sysname your.system.name.tld
rwcommunity password
rocommunity otherpassword
agentaddressudp:[EMAIL
Alfonso Romero wrote:
I´m using natd on a FreeBSD 4.8 box as a gateway, so my
internal LAN
can access Internet. I´ve configured a web server, but
the local LAN
machines
can´t access the server by it´s domain name. If I setup my FreeBSD
gateway to
also act as a DNS server, are
Greetings fellow B.S.D. enthusiasts. Recently, I requested
installation
of a television cable at my home in Sacramento, California.
The cable operator is Comcast. I requested connection of the
television cable to my computer, which is a service that the
operator advertises profusely.
seeking recommendation for a good system resource monitoring
app that works well with window maker or blackbox. I have
looked through the ports and the ones i found say the port/s
is broken. I would like one that shows cpu, ram , swap, file
system ...such as / 90% /tmp 30% and network
[2003/06/18 16:12:08, 0] smbd/server.c:main(791)
smbd version 2.2.8a started.
Copyright Andrew Tridgell and the Samba Team 1992-2002
[2003/06/18 16:12:08, 0] lib/util_sock.c:open_socket_in(804)
bind failed on port 139 socket_addr = 0.0.0.0.
Error = Address already in use
I cvsup'ed at some point yesturday and portupgraded most everything
(except printing stuff) today. After all that, I am still having a
problem installing gnome2. It consistently breaks at the following
location in gstreamer. Any ideas?
# uname -a
FreeBSD homer 4.7-RELEASE FreeBSD 4.7-RELEASE
Following this:
http://lists.freebsd.org/pipermail/freebsd-gnome/2003-May/001034.html
It built cleanly.
# uname -a
FreeBSD homer 4.7-RELEASE FreeBSD 4.7-RELEASE #0: Wed Oct 16 23:18:32
PDT 2002 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/HOMER i386
lgthread-2.0 -lglib-2.0 -liconv
Okay, I have gnome compiled and running and for the most part, things
seem to function okay. However, on startup, there are several dialogs
telling me it cannot load certain applets (clock, tasklist, etc). They
all reference the same missing file of:
/usr/X11R6/lib/libgen_util_applet-2.so
and
On Sat, 2003-06-21 at 22:26, Derrick Ryalls wrote:
Okay, I have gnome compiled and running and for the most
part, things
seem to function okay. However, on startup, there are
several dialogs
telling me it cannot load certain applets (clock, tasklist, etc).
They all reference
optionPNPBIOS
devicepcm
rain# grep pcm /var/run/dmesg.boot
pcm0: ESS 18xx DSP on sbc0
For my ESS audio (1936 or something), I needed the pcm and:
device sbc
not sure if it will make a difference since your card is being detected
on boot, but it might
I've installed Majordomo from the ports and it runs using
sendmail. I got an error message saying that resend couldn't
write in /usr/local/majordomo/lists because it was 'wold
writable'. When I restrict write privileges then I get
'permission denied' when it tries to create a temporary
In the last episode (Jul 01), david said:
I found no information on setting or installing a mysql
server in the
freeBSD handbook online or the hardcopy version which I have.
This is pretty much it:
cd /usr/ports/databases/mysql40-server
make install
Hello all,
I have forwarded a message that's about two weeks old from
the -newbies list.
As you'll see, the problem is related to kernel compilation.
One bit of update to this old message:
I got wise to it (slightly), and decided that despite the
fact that I didn't
have an ISA
Normally when building a port, I just type make install clean and let it
run. However, I need to modify a source file before the build starts.
Since many patches are included in the port, I am looking for it to stop
after everything is downloaded extracted and patched, just before the
build
* Derrick Ryalls [EMAIL PROTECTED] [2003-07-06 14.54 -0700]:
Normally when building a port, I just type make install
clean and let
it run. However, I need to modify a source file before the build
starts. Since many patches are included in the port, I am
looking for
it to stop
I've got a machine that's been running fine for years with one NIC. I
want to experiment with setting it up as a gateway and have
installed a
second NIC in it. I can't seem to get the second NIC working fully.
Here's the dmesg output on the two NICs:
dc0: 82c169 PNIC 10/100BaseTX port
FreeBSD team,
I am having problems mounting my filesystem after moving the
drive from slave to master, the old location was,
'/dev/ad1s1a', and the device is now called 'ad0'.
I can tell you what the problem is, I just don't know exactly how to fix
it. I believe it is your
I'm looking to build a little FreeBSD box that doesn't have any (or
many) moving parts. Just a flashdrive, 2-3 ethernet ports, serial
console, etc.
Can anyone recommend vendors that make such hardware?
http://www.openaccess.org/
I haven't used them, but a small company that I
I have been trying to run the Lynx web browser it tells me
Command not found, is Lynx not part of the base
installation for Free BSD?
===[root] /usr/ports # make search name=lynx
Port: ja-lynx-2.8.4.rel1
Path: /usr/ports/japanese/lynx
Info: A terminal-based World-Wide Web Client with
PROTECTED]] On Behalf Of Giorgos
Keramidas
Sent: Monday, September 30, 2002 4:49 PM
To: Derrick Ryalls
Cc: [EMAIL PROTECTED]
Subject: Re: 4.7 RC problem
On 2002-09-30 00:06, Derrick Ryalls [EMAIL PROTECTED] wrote:
After some hardware issues were resolved, I did a cvsup to get
everything up to date
comments below
Subject: Re: mailing list software
At 01:07 PM 10.22.2002 -0400, Anthony Abby wrote:
But does a list subscriber need to find/remember and use his list
password
to unsubscribe?
That stupid requirement pretty much kills mailman for the non-geek,
mass-market crowd.
Hi guys, me again :)
well I've been reading up on compiling a kernel for nat and
ipfw. I'm running a d-link 704 router now. I want some input here...
I have an extra box (p200 - 128ram) for a router firewall..
I was thinking about it being my Gateway/Router/Firewall for
my other 3
I am thinking about doing this at home for *cough* fun, but I have XP as
a desktop. Could you post the link to the IBM article in question, I
think it would be good for the archives.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:owner-freebsd-questions;FreeBSD.ORG] On Behalf Of
-Original Message-
From: [EMAIL PROTECTED]
[mailto:owner-freebsd-questions;FreeBSD.ORG] On Behalf Of
Charles Pelletier
Sent: Wednesday, November 06, 2002 3:47 PM
To: [EMAIL PROTECTED]
Subject: ftp servers and sysinstall
anyone else have problems accessing the ftp servers
-Original Message-
From: [EMAIL PROTECTED]
[mailto:owner-freebsd-questions;FreeBSD.ORG] On Behalf Of
Kirk Strauser
Sent: Wednesday, November 06, 2002 7:05 PM
To: [EMAIL PROTECTED]
Subject: Re: FreeBSD filesystem 1TB Limit
At 2002-11-07T02:31:38Z, Marco Radzinschi
[EMAIL
-Original Message-
From: [EMAIL PROTECTED]
[mailto:owner-freebsd-questions;FreeBSD.ORG] On Behalf Of Warren Block
Sent: Sunday, November 10, 2002 10:50 AM
To: W. D.
Cc: [EMAIL PROTECTED]
Subject: Re: How to stop SPAMMER??!
On Sat, 9 Nov 2002, W. D. wrote:
At 19:49
Hello!
I have installed FreeBSD 4.7 recently, and it seems it does
not want to
work as a gateway. I have two network cards in my FreeBSD
computer, fxp0
for LAN and sis0 for the cable modem. I am new to FreeBSD, so I am
confused what the difference between gateways and routers is (I was
Hi,
I'm trying to get NAT up and running on my FreeBSD
4.7R gateway machine and have hit a bit of a wall.
Have looked around online for FAQs and other help and
haven't really been able to isolate the problem this
way. If anyone can offer advice, I would be most
appreciative.
I have a
I cannot seem to delete a soft link (ln -s) that is pointing
to a directory without renaming the directory first. If I try
to delete the link it complains that the link is a directory
(which it is pointing to). If I delete using rm -rf, it
deletes the directory that is pointed to but not
Evenin' folks,
I have an old Pentium 120Hz machine that is acting as a
firewall/gateway for my network.
Recently, the 4GB hard drive started to make strange noises
and drive errors started popping up. So I replaced the hard
drive with the smallest new hard drive I could get hold of
I started to use samba with freebsd and I cant say that I am
satisfied with the performance of it. Specifically on my
local 100Mbits network the samba read speed on the server
(athlon 1700) is 1Mbit/sec, while the write speed is much
much worse.
I have samba set up on multiple machines.
Hi All,
Thanks to all of you that replied so promptly to my question.
However I think I failed to outline the situation clearly
enough so with the responses so far in mind...
Question was: Is it possible for FreeBSD to shut itself down
and restart for no reason?
- The new server
I am running FreeBSD 5.3 Release on a AMD Athlon 2800+ with Linux
compatibility installed. I have just installed Linux-EnemyTerritory
from ports and I tried to run it: ./et in
/usr/compat/linux/usr/games/et .
I then get this error message:
...loading libGL.so.1: QGL_Init: dlopen
1 - 100 of 195 matches
Mail list logo
