Re: film-printer
ingo wrote: hi. i want to know where to search for people, who are knowing about film-printer and raster technology. i have a polaroid CI5000S and want to know, if theres a driver for freebsd, and how the device can work under freebsd. I don't know anything about it, however, I think that model has both scsi and parallel interface. You can only use the parallel interface under freebsd. If you have a .ppd file you may be able to use the printer properly under the CUPS printing system. --- Mark atkin901 at NOSPAM yahoo dot com (!wired)?(coffee++):(wired); ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: arp messages: Why is this happening?
This is probably a DHCP network? This would happen if a client gets a new DHCP assigned IP address, instead of it's old one, and before the freebsd boxes' ARP cache expired for that machine. Usually this only happens with: - broken DHCP clients (not requesting it's old ip back upon reboot). - broken DHCP servers (not maintaining lease state properly to assign clients their old addresses) - tight DHCP address spaces (ie. the DHCP server must reuse previously leased IP addresses to accomodate new DISCOVERS). or a combination of the above. Either that or you have a whole bunch of machines that use gratuitous ARP to advertise the new interfaces in a failover situation. ODHIAMBO Washington wrote: My log files (and console) fill up with these messages. arp: 62.8.64.172 moved from 00:c0:05:11:01:f1 to 00:c0:05:10:01:f1 on bge1 arp: 62.8.64.201 moved from 00:c0:05:10:01:f1 to 00:c0:05:11:01:f1 on bge1 arp: 62.8.64.201 moved from 00:c0:05:11:01:f1 to 00:c0:05:10:01:f1 on bge1 arp: 62.8.64.145 moved from 00:c0:05:11:01:f1 to 00:c0:05:10:01:f1 on bge1 arp: 62.8.64.212 moved from 00:c0:05:11:01:f1 to 00:c0:05:10:01:f1 on bge1 arp: 62.8.64.188 moved from 00:c0:05:11:01:f1 to 00:c0:05:10:01:f1 on bge1 ... Googling doesn't seem to give me a good answer as to why. This is 4.8-STABLE -Wash --- Mark atkin901 at NOSPAM yahoo dot com (!wired)?(coffee++):(wired); ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Reading an unknown DAT Tape
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On 03/15/2012 14:02, Jerry McAllister wrote: On Thu, Mar 15, 2012 at 03:17:05PM -0500, Martin McCormick wrote: This is a case of idle curiosity and not an urgent need to recover a valuable backup. I found an old DAT tape and attempted to read it on the very drive that probably once wrote it and it appears to read the tape properly in that I can use dd to copy it to a file and mt fsf 5, for example, takes the tape to the fifth file marker so there is sanity. Tar, however, does not recognize the format of the archive so it is either something proprietary or I am not using the correct utility on it. I opened it with dd files=2 if=/dev/sa0 of=testfile and then did the strings utility on testfile and got: TAPE SSET VOLB DIRB NACL Setting security iles SPAD DIRB NACL Setting security on system files... SPAD DIRB NACL SPAD DIRB NACL SPAD FILE NACL STAN Jun 23 2003 12:00AM Jan 1 1900 8:45AM Jan 1 1900 9:00AM I wondered about it being a dump(8) file, but just tried one and strings output looked a little different. How about a db of some sort or a log from some lab test? jerry Note that we are obviously able to read data from the tape as the top few lines are readible as words. The time stamps at the bottom are possibly not time stamps as some of them are not plausible. The dd command never faltered with errors although I did finally stop it manually. Is there any FreeBSD utility that can tell more about what created the original archive? Thank you. Martin McCormick A quick check of Google with the strings you dumped points at Microsoft Tape format. Possibly from the win2k utility. -BEGIN PGP SIGNATURE- Version: GnuPG v2.0.18 (FreeBSD) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ iEYEARECAAYFAk9iW/QACgkQrDN5kXnx8yYRawCePDzWmtZaHrvB1jq3gY3BS96f dvUAnRvBdclM3E0+WDus0dNlPVuN1ELD =p5oa -END PGP SIGNATURE- ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: Please help me diagnose this crazy VMWare/FreeBSD 8.x crash
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On 03/29/2012 07:03, Mark Felder wrote: Alright, new data. It happened to crash about 10 minutes after I came in this morning and I ran some stuff in the DDB. I have no idea what information is useful, but perhaps someone will see something out of the ordinary? http://feld.me/freebsd/esx_crash/ If this is an interrupt problem with disk i/o, then you might want to look into (DDB(4)) show intr show intrcount maybe show allrman -BEGIN PGP SIGNATURE- Version: GnuPG v2.0.19 (FreeBSD) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ iEYEARECAAYFAk90lloACgkQrDN5kXnx8yaCZACbBamQksNyWC26PUsOn5N9LJLV ql0AoJwYCFDfXhCpZIN735V9qg0VepFf =fCLN -END PGP SIGNATURE- ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: Android usb tethering
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On 11/01/2010 03:54, freebsd-questi...@herveybayaustralia.com.au wrote: Anyone tried the data tethering feature on the Android phones? I have, it works. Attaching via usb in the proper mode should attach the umodem device which you can then use the published serial device with the userland ppp(8). Defining the correct section name for tethering can be a little daunting however. Google for things like 'telstra GSM ppp.conf' or such and then you just have to convert any linux scripts you find into freebsd ppp.conf. If you're lucky you may find freebsd specific configurations. Or, someone on the list may have one to share. - -Mark -BEGIN PGP SIGNATURE- Version: GnuPG v2.0.16 (FreeBSD) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ iEYEARECAAYFAkzO0fEACgkQrDN5kXnx8ybfHwCffDLttNzAL8g1kUxhYbYv1/Z+ 9fEAnjqr0IT7BU1+T2zSvQR82LnLp+js =8Res -END PGP SIGNATURE- ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: Tyan K8WE (S2895) Status
Carlos Linares wrote: Hello all. Can anyone with the afore-mentioned motherboard relate their experiences? I'm particularly interested in how it runs FreeBSD amd64 with two Opteron dual-core 2xx chips (it seems you need both chips in order to see all mobo devices since buses are connected to one or the other cpu socket via hypertransport link), and whether recent releases or -current can see all ethernet ports and PCI (incl. -X and e) slots with ACPI enabled/disabled. Has anyone tried the new BIOS update? S2895's not EOL'd yet - though availability is getting sketchy... I'm running two single core 252's on it, and I haven't run amd64 on it, but it should be fine. I've running 32bit kernels/world on it just great on the 105 (not E) bios. nfe0 and 1 work great, even the on-board raid works: ar0: 238475MB nVidia MediaShield RAID1 status: READY ar0: disk0 READY (master) using ad6 at ata3-master ar0: disk1 READY (mirror) using ad4 at ata2-master tracking 8-current on it presently. However, I don't use any video in it at all, only the serial console. So I can't attest to that. -- Mark Atkinson [EMAIL PROTECTED] (!wired)?(coffee++):(wired); ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Spontaneous Reboots (I thought it was Virtualbox Kernel Modules)
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On 08/24/10 10:29, Chris Maness wrote: I have commented out the lines that load kernel modules for virtualbox, and made sure they were gone with kldstat. However I am still getting VERY infrequent spontaneous reboots. So it is not the modules. I am thinking hardware. It has a temperature alarm that sounds when it is hot, but since I have cleaned it out I have not had any issues with heat. I am thinking bad processor/ram. It is behaving the same way before/after the upgraded to the latest release. What do you guys think? You can try the following ( I believe this is in 8-STABLE ) echo 'hw.mca.enabled=1' /boot/loader.conf and reboot. If it's hardware supported machine check exception, then you may see which component has an issue on the console in the machine check output. - -Mark -BEGIN PGP SIGNATURE- Version: GnuPG v2.0.16 (FreeBSD) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ iEYEARECAAYFAkx0N74ACgkQrDN5kXnx8yZfSgCeIrd2qXmatERuOhPwW2W6cqY0 FtEAnj3154huE/8aVl5W3zA22YjNw2UL =p002 -END PGP SIGNATURE- ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
