On 12/7/11, Polytropon free...@edvax.de wrote:
On Tue, 06 Dec 2011 16:02:24 -0800, Ronald F. Guilmette wrote:
I've been trying to look at California Dept. of Transportation webcams
using Firefox on FreeBSD and so far it simply ain't workin'. Somebody
please tell me what I'm doing wrong.
On 12/7/11, Ronald F. Guilmette r...@tristatelogic.com wrote:
In message
CAPYw7P7g=FZDOXc2PGqMHm=C2q5KxgxrvO3=zeirntkzwf9...@mail.gmail.com
, Paul B. Mahol one...@gmail.com wrote:
On 12/7/11, Polytropon free...@edvax.de wrote:
On Tue, 06 Dec 2011 16:02:24 -0800, Ronald F. Guilmette wrote
On 11/20/11, Rob Clark rpcl...@tds.net wrote:
Running fbsd 8.2R on a Dell C640 laptop.
Using a pcmcia card with atheros.
My 2wire wireless router comes setup default with
wep open with wireless security enabled, i.e., needs
the default passkey from the router. I cannot get the
ifconfig
On 10/25/11, Michael D. Norwick mnorw...@centurytel.net wrote:
Setting these environment variables had no effect on my machine.
$cdcontrol play 1 still produces drive activity but no sound. The
graphical apps I am trying such as Abraca, or MPlayer, still do not seem
to recognize an audio CD.
On 7/3/11, _ pancakekin...@gmail.com wrote:
Hi List,
I can't get my WLAN (WPA) to work and I am somewhat at a loss, as to what
else to try...
The /etc/rc.conf portion looks like this:
ifconfig_wi0=WPA DHCP
My /etc/wpa_supplicant.conf looks like this:
network={
ssid=my_ssid
On 4/16/11, Ricardo Gomez ricardo.gomez...@gmail.com wrote:
I am attempting to run freebsd on a macbook 5, 1. I installed using dvd1 and
everithing went fine. The only problem is that my
builtin wireless is a bcm432b which is PITA to make work in any
non-propietary system.I know for other
On Mon, Feb 28, 2011 at 8:31 PM, David Demelier
demelier.da...@gmail.com wrote:
Hello,
My bios can be set to use IDE emulation or ahci mode, I prefere the ahci
mode because it's a bit faster.
It's probably stupid to stay with ata(4) driver with the ahci mode, isn't
it? But with ahci(4)
On Mon, Feb 14, 2011 at 5:31 AM, Gautham Ganapathy
Would these changes be available in 8.2-release?
They should be already in 8.2 RC3 (dunno about loader bug).
Anyway you always can track FreeBSD STABLE and stable branch of
https://github.com/richardpl/NDISulator .
On 1/25/11, Eitan Adler li...@eitanadler.com wrote:
Recently I tried to connect to the same AP described in the following
thread:
http://www.mail-archive.com/freebsd-questions@freebsd.org/msg238799.html
It worked relatively well until now.
Whenever I try to use ifconfig, wpa_supplicant,
On Tue, Jan 25, 2011 at 7:28 PM, Yuri y...@rawbw.com wrote:
Does reverting:
http://www.freebsd.org/cgi/cvsweb.cgi/src/sys/dev/if_ndis/if_ndis_usb.c.diff?r1=1.19.2.3;r2=1.19.2.4;f=h
fixed problem?
Hi Paul,
So did the find that this particular checkin caused the problem led to some
On Sun, Jan 23, 2011 at 3:47 PM, John R. Levine jo...@iecc.com wrote:
Is this a known problem? As far as I know, it's supposed to work.
How you change MAC address? With ether command?
# ifconfig em0 ether 01:17:a4:8f:04:5d
Well, if it does not work it can be driver bug.
In iwn case try to
On Sun, Jan 23, 2011 at 3:38 AM, John Levine jo...@iecc.com wrote:
My Lenovo laptop running 8.1 has two ordinary Intel network adapters,
a wired PRO/1000 with the em driver and a WiFi PRO/Wireless 5300 with
the iwn driver. They work fine, but for either one if I use ifconfig
to change the MAC
On Mon, Jan 17, 2011 at 5:12 PM, Yuri y...@rawbw.com wrote:
Do you load ndis and if_ndis via loader.conf too?
Yes, presense of if_ndis and ndis in loader.conf doesn't change anything.
Does reverting:
On Sat, Jan 15, 2011 at 1:19 AM, Yuri y...@rawbw.com wrote:
I have the old module that always worked.
Begining from some update (~8.1-STABLE), it stopped loading at boot time
with the messages:
...skipped...
module ndis already present
KLD file bcmwl5_sys.ko is missing dependencies
On Sat, Jan 8, 2011 at 8:18 PM, Chris Brennan xa...@xaerolimit.net wrote:
Greetings!
I got bwn to recognize my wireless card, I think there is still something
missing tho and it's left me scratching my head.
[r...@blackdragon ~]# dmesg | grep -e bwn -e wlan0
module_register: module
On 1/8/11, Chris Brennan xa...@xaerolimit.net wrote:
On Sat, Jan 8, 2011 at 3:57 PM, Paul B Mahol one...@gmail.com wrote:
Try to load lp firmware instead of non-lp.
Paul thanks for getting back to me so quickly. That did the trick. Once I
loaded the lp driver, it powered up correctly
On Thu, Dec 16, 2010 at 7:28 PM, Justin V. v...@yeaguy.com wrote:
interesting.. do you know of a better adapter to use??
ive done a search on wlan0 and bmiss.. alot of threads regarding that issue,
but all the threads show bmiss 7 ?? does that seem odd??
FYI, you can change bmiss value with
On 12/11/10 17:16, xinyou yan wrote:
2. anybody who know how to listen the music like .ape or flac
Any player which use libavcodec.
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To
On 12/10/10, Chris Brennan xa...@xaerolimit.net wrote:
Umm... what's the dea w/ this? More spam?
Not my spam.
If you still think that I actually really send this to you I can not help you.
___
freebsd-questions@freebsd.org mailing list
On 12/9/10, Michael mlmichae...@gmail.com wrote:
On 09/12/2010 02:51, Adam Vande More wrote:
On Wed, Dec 8, 2010 at 5:01 PM, Michaelmlmichae...@gmail.com wrote:
Again, other systems doesn't seem to have any trouble with getting IP
from
this DHCP server and wired interface (em0) works fine
On 12/1/10, David Demelier demelier.da...@gmail.com wrote:
On 30/11/2010 23:29, Paul B Mahol wrote:
On 11/30/10, David DEMELIERdemelier.da...@gmail.com wrote:
2010/11/30 Paul B Maholone...@gmail.com:
On 11/30/10, David DEMELIERdemelier.da...@gmail.com wrote:
2010/11/30 Patrick
On 12/1/10, David DEMELIER demelier.da...@gmail.com wrote:
2010/12/1 Paul B Mahol one...@gmail.com:
On 12/1/10, David Demelier demelier.da...@gmail.com wrote:
On 30/11/2010 23:29, Paul B Mahol wrote:
On 11/30/10, David DEMELIERdemelier.da...@gmail.com wrote:
2010/11/30 Paul B Maholone
On 11/30/10, David Demelier demelier.da...@gmail.com wrote:
Hello,
We all know that we can only have 8 ufs partitions in one freebsd slice.
Since OpenBSD and NetBSD can support at most 32 partitions iirc.
I wonder why FreeBSD still lacks more ufs partitions in one slice?
Actually FreeBSD
On 11/30/10, David DEMELIER demelier.da...@gmail.com wrote:
2010/11/30 Patrick Lamaiziere patf...@davenulle.org:
Le Tue, 30 Nov 2010 21:45:03 +0100,
David Demelier demelier.da...@gmail.com a ecrit :
Hello,
Hello,
We all know that we can only have 8 ufs partitions in one freebsd
slice.
On 11/30/10, David DEMELIER demelier.da...@gmail.com wrote:
2010/11/30 Paul B Mahol one...@gmail.com:
On 11/30/10, David DEMELIER demelier.da...@gmail.com wrote:
2010/11/30 Patrick Lamaiziere patf...@davenulle.org:
Le Tue, 30 Nov 2010 21:45:03 +0100,
David Demelier demelier.da...@gmail.com
On 11/7/10, Chris Brennan xa...@xaerolimit.net wrote:
On Thu, Nov 4, 2010 at 9:45 AM, Chris Brennan xa...@xaerolimit.net wrote:
It is faster/easier to fix NDISulator than to port ndiswrapper to FreeBSD.
No doubt it would be faster and easier to fix NDISulator then to port
ndiswrapper. This
On 11/3/10, Chris Brennan xa...@xaerolimit.net wrote:
On Wed, Nov 3, 2010 at 4:41 PM, Mark redt...@sbcglobal.net wrote:
I've got a dell mini with the same card, it works with 8.0 and 8.1 32 bit
but I had to use the 32bit XP files with NDISwrapper to get the driver to
build. HTH
Not
On 11/3/10, Chris Brennan xa...@xaerolimit.net wrote:
I figured the general users list was a good place to start. I'm somewhat new
to FreeBSD still, I have one fbsd7.3 home server and it serves it's purposes
quite nicely. I decided to installed FreeBSD64 on my laptop. For the most
part, things
On 10/13/10, Mark Moellering m...@msen.com wrote:
I created a driver for my rtl8187 SE in my MSI Wind netbook using ndisgen.
I placed the driver , rtl8187Se_sys.ko in /boot/modules
I added rtl8187Se_sys_load=YES in /boot/loader.conf
I can kldload rtl8187Se_sys and everything seems OK.
If
On 10/13/10, Mark Moellering m...@msen.com wrote:
On 13-Oct-10 12:47 PM, Paul B Mahol wrote:
On 10/13/10, Mark Moelleringm...@msen.com wrote:
I created a driver for my rtl8187 SE in my MSI Wind netbook using
ndisgen.
I placed the driver , rtl8187Se_sys.ko in /boot/modules
I added
On Thu, Sep 30, 2010 at 3:24 PM, Anton Shterenlikht me...@bristol.ac.uk wrote:
I've this wireless cardbus card:
no...@pci0:3:0:0: class=0x028000 card=0x1260 chip=0x38901260
rev=0x01
hdr=0x00
vendor = 'Intersil Americas Inc (Was: Harris Semiconductor)'
device =
On 10/8/10, Eitan Adler li...@eitanadler.com wrote:
Finally, thank to Freenode's ##freebsd I tried wpa_supplicant which worked.
I can now connect to the internet.
I'd still like to know why I must use the program and I can't use the
raw commands though.
So OPEN authmode is broken somehow?
On 10/7/10, Eitan Adler li...@eitanadler.com wrote:
On a fresh 8.1-RELEASE install
ifconfig wlan0 scan results in no output and takes forever (ie - it hangs)
If you set wlan0 for manual roaming it will not hang.
Use 'ifconfig wlan0 list scan' instead.
ifconfig wlan0 ssid my_ssid
dhclient
On 10/7/10, Eitan Adler li...@eitanadler.com wrote:
ifconfig wlan0 scan results in no output and takes forever (ie - it
hangs)
If you set wlan0 for manual roaming it will not hang.
Use 'ifconfig wlan0 list scan' instead.
That worked, thanks.
dhclient still results in no link being found.
On 10/7/10, Eitan Adler li...@eitanadler.com wrote:
On Thu, Oct 7, 2010 at 2:31 PM, Paul B Mahol one...@gmail.com wrote:
On 10/7/10, Eitan Adler li...@eitanadler.com wrote:
ifconfig wlan0 scan results in no output and takes forever (ie - it
hangs)
If you set wlan0 for manual roaming
On 10/7/10, Eitan Adler li...@eitanadler.com wrote:
Looks like you cant associate at all.
Also signal power is too low.
Why is INT (beacon interval of AP) 102 ?
These are the defaults - I have no idea what these numbers mean. What
should/could I be changing?
I doubt that AP have
On 10/7/10, Eitan Adler li...@eitanadler.com wrote:
On Thu, Oct 7, 2010 at 5:22 PM, Paul B Mahol one...@gmail.com wrote:
On 10/7/10, Eitan Adler li...@eitanadler.com wrote:
Looks like you cant associate at all.
Also signal power is too low.
Why is INT (beacon interval of AP) 102
On 9/26/10, Carmel carmel...@hotmail.com wrote:
On Sun, 26 Sep 2010 02:03:28 +0200
Polytropon free...@edvax.de articulated:
On Sat, 25 Sep 2010 19:46:08 -0400, Carmel carmel...@hotmail.com
wrote:
On Sun, 26 Sep 2010 00:49:16 +0200
Polytropon free...@edvax.de articulated:
Have you
On 10/5/10, Mark Stosberg m...@summersault.com wrote:
Hello,
We've been satisfied FreeBSD users for several years at our hosting
company.
Recently we ran into into a problem where a long running cron script was
dying early because it is hitting FreeBSD's data segment size limit of
512
On 10/1/10, Chetan Shukla chetan.shu...@aricent.com wrote:
Hi All,
I am working on some code porting activity that wants
Some code to be ported on FreeBSD.
I need to check the version of Make installed in FreeBSD.
make -v does not help here.
What is the similar command in FreeBSD ?
On 10/1/10, Devin Teske dte...@vicor.com wrote:
On 10/1/10, Chetan Shukla chetan.shu...@aricent.com wrote:
I need to check the version of Make installed in FreeBSD.
make -v does not help here.
What is the similar command in FreeBSD ?
On Fri, 2010-10-01 at 18:33 +, Paul B Mahol wrote
On 9/28/10, Anton Shterenlikht me...@bristol.ac.uk wrote:
I'm trying to learn the very basics of the
compile - assemble - link process on FreeBSD.
Please don't shoot me.
I've this c code:
% cat tmp.c
int main() {
int a;
int b;
int c;
a = 2;
b =
On 9/25/10, Carmel carmel...@hotmail.com wrote:
I am using FreeBSD 8.1 / amd64 with Platform Version 4.5.1 (KDE 4.5.1)
if that matters.Before updating my system to FreeBSD 8.1 / amd64, I had
the 7.3 /32 bit version installed. I completely erased the HD prior to
installed the newer version so
On 9/25/10, Jon Otterholm jon.otterh...@ide.resurscentrum.se wrote:
Hi.
I am going to upgrade my CPU on a system that I compiled both world and
kernel on. The current CPU is Core i5-670 and I'm changing to Xeon
X3470. Will I be able to boot my system or has GCC specific flags for i5
that
On Fri, Jul 23, 2010 at 8:33 PM, Gautham Ganapathy gauth...@gmail.com wrote:
Hi
I have an Alienware m11x with a Dell 1520 wireless minicard (Broadcom
BCM4353 chipset). It comes with only Windows 7 drivers, but I was able to
download Windows XP drivers seperately. However, after I generate the
On 7/24/10, Jerry freebsd.u...@seibercom.net wrote:
On Sat, 24 Jul 2010 12:01:24 +
Paul B Mahol one...@gmail.com articulated:
Such symbols are completly irrelevant for normal operation, because
NDISulator crash on amd64 during driver initialization.
I fixed this in my own git repo
On Mon, Jul 19, 2010 at 11:12 PM, Leonardo M. Ramé martinr...@yahoo.com wrote:
I have noted that my wlan stops responding when the O.S. does not use the
network for a while (10 minutes aprox), and I have to do ifconfig wlan0 down
ifconfig wlan0 up dhclient wlan0 to reconnect.
The network
On Fri, Jul 16, 2010 at 4:43 PM, Chris Maness ch...@chrismaness.com wrote:
What ever happened to xchess the gnu-chess engine client? Did it
merge into something else?
xboard?
___
freebsd-questions@freebsd.org mailing list
On Wed, Jul 14, 2010 at 12:46 PM, Alexander Best
alexbes...@uni-muenster.de wrote:
2010/7/14 Alexander Best alexbes...@uni-muenster.de:
hi there,
my dvdr drive supports recording DVDs (both DVD-Rs and DVD+Rs) at a
maximum speed of 16x. however at speeds of more than ~12x the burner's
buffer
On Thu, Jul 8, 2010 at 9:18 AM, Anton Shterenlikht me...@bristol.ac.uk wrote:
I'd like to set up wireless on amd64 laptop.
Can somebody recommend a mini pci (pci-e) or
pcimcia device, that is proven to work?
Look into ath(4) manual page.
Just dont buy newest stuff from atheros because there
On Mon, Jul 5, 2010 at 11:54 AM, Anton Shterenlikht me...@bristol.ac.uk wrote:
I've HP Compaq 6715s laptop.
Looking at pciconf -lv output, the
wireless (and ethernet) device is:
b...@pci0:16:0:0: class=0x02 card=0x30c2103c chip=0x171314e4
rev=0x02 hdr=0x00
vendor =
On Thu, Apr 29, 2010 at 11:00 AM, Jerry freebsd.u...@seibercom.net wrote:
Apparently, FreeBSD does not have a driver for a Linksys WUSB600N
network adapter. I was thinking of using the ndisgen utility to create
a driver via the WinXP version. I have three questions.
1) The WinXP driver was
On Thu, Apr 29, 2010 at 12:13 PM, Jerry freebsd.u...@seibercom.net wrote:
On Thu, 29 Apr 2010 11:36:35 +
Paul one...@gmail.com articulated:
On Thu, Apr 29, 2010 at 11:00 AM, Jerry freebsd.u...@seibercom.net
wrote:
Apparently, FreeBSD does not have a driver for a Linksys WUSB600N
On 4/23/10, xyz harvey.two.face.k...@gmail.com wrote:
Those numbers mean the size in mo, of linux kernel (3.2mo), and freebsd
kernel (33,9mo) for the same hardware configuration.
My kernel is 2.8 MB and ~30 MB are modules (all of them).
Is it difficult to update the patch?
Is it difficult to
On 4/22/10, xyz harvey.two.face.k...@gmail.com wrote:
Hi
Thank you for your answer
But I can't believe that lighten the kernel of useless drivers, saves
only few bytes, by removing whole useless modules (sound, ata/sata, agp...).
Furthermore, I think about free space that could be save too,
On 4/21/10, xyz harvey.two.face.k...@gmail.com wrote:
Thank you for your answer.
But how I can only choose the intel agp driver, without all others by
puting agp in the kernel configuration file?
Currently you can not pick only intel agp code, agp module have
support for other vendors too.
I
On 4/1/10, Peter Steele pste...@maxiscale.com wrote:
We clone systems from specially prepared USB flash sticks and this all works
well, except that occasionally the flash stick fails to boot. It fails at
the mount root step, saying that it cannot mount the specified root
partition. We use a
On 3/31/10, Anoop Kumar Narayanan anoop...@gmail.com wrote:
On Wed, Mar 31, 2010 at 2:33 AM, Paul B Mahol one...@gmail.com wrote:
On 3/30/10, Anoop Kumar Narayanan anoop...@gmail.com wrote:
On Sun, Mar 28, 2010 at 5:33 PM, Gary Jennejohn
gary.jennej...@freenet.de wrote:
On Sun, 28 Mar 2010 11
On 3/30/10, Anoop Kumar Narayanan anoop...@gmail.com wrote:
On Sun, Mar 28, 2010 at 5:33 PM, Gary Jennejohn
gary.jennej...@freenet.de wrote:
On Sun, 28 Mar 2010 11:18:59 +
Masoom Shaikh masoom.sha...@gmail.com wrote:
On Sun, Mar 28, 2010 at 10:32 AM, Ivan Voras ivo...@freebsd.org wrote:
Make use of google.
You need to create wlanX first.
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
On 3/12/10, Chuck Swiger cswi...@mac.com wrote:
Hi, Elmar--
On Mar 12, 2010, at 9:54 AM, Elmar Stellnberger wrote:
I am looking forward to engage in FreeBSD by implementing ext3-support
and a suspend to disk facility.
mount_ext2fs or fusefs ought to work with ext3 filesystems.
zzz or
On 3/6/10, C. P. Ghost cpgh...@cordula.ws wrote:
On Sat, Mar 6, 2010 at 9:25 AM, Polytropon free...@edvax.de wrote:
On Sat, 6 Mar 2010 09:03:58 +0100, Sabine Baer bae...@t-online.de wrote:
Well, it is, indeed. Me I am very glad beeing able to do eg
linux-opera -display :0
On 2/28/10, Aaron Lewis aaron.lewis1...@gmail.com wrote:
Hi,
I gonna recompile kernel for my core2 CPU , so i'd like to pass some
flags to gcc.
Kinds of -march=core2 , i tried to modify /etc/make.conf
e.gCFLAGS += -march=core2 -O20 -ffast-math -mfpmath=sse
But it fails
Do not top post.
On 2/28/10, Aaron Lewis aaron.lewis1...@gmail.com wrote:
Really ? It's bad to use custom flags to compile kernel , why do you
think so ?
I'd like to know more about this : )
Use google.
So setting optimize compiler flags is only useful for userland stuff ?
Paul B Mahol
On 2/18/10, Anselm Strauss amsiba...@gmail.com wrote:
On Feb 17, 2010, at 23:36 , Paul B Mahol wrote:
On 2/17/10, Anselm Strauss amsiba...@gmail.com wrote:
On Feb 17, 2010, at 13:54 , Paul B Mahol wrote:
I use 8.0. Here is the script of what I did to manually setup the card:
Script started
On 2/17/10, Anselm Strauss amsiba...@gmail.com wrote:
On Tue, Feb 16, 2010 at 11:28 PM, Paul B Mahol one...@gmail.com wrote:
On 2/16/10, Anselm Strauss amsiba...@gmail.com wrote:
Hey,
anybody got the RTL8192SE wireless chip to work with FreeBSD? I bought a
Asus 1201N laptop. I
On Wed, Feb 17, 2010 at 6:20 PM, Jeff Mo mo0...@gmail.com wrote:
Hello,
I found the solution about why this bug occurs.
http://www.freebsd.org/cgi/query-pr.cgi?pr=125239cat=
Make use of Submit Followup link.
I would like to contribute my knowledge to FreeBSD website but do not
know where to
On 2/17/10, Anselm Strauss amsiba...@gmail.com wrote:
On Feb 17, 2010, at 13:54 , Paul B Mahol wrote:
On 2/17/10, Anselm Strauss amsiba...@gmail.com wrote:
On Tue, Feb 16, 2010 at 11:28 PM, Paul B Mahol one...@gmail.com wrote:
On 2/16/10, Anselm Strauss amsiba...@gmail.com wrote:
Hey
On 2/17/10, Anselm Strauss amsiba...@gmail.com wrote:
I just noticed I forgot to load the wlan_xauth module. Did so now, but it
doesn't change anything.
ndis(4) cant use that one. Maybe one day whan NDIS api get usable
hostap support.
___
On 2/16/10, Anselm Strauss amsiba...@gmail.com wrote:
Hey,
anybody got the RTL8192SE wireless chip to work with FreeBSD? I bought a
Asus 1201N laptop. I successfully compiled the Windows XP driver with
ndisgen(8). The driver loads and the device is there. On the FreeBSD EeePC
wiki it says
On Sun, Feb 14, 2010 at 8:35 AM, Eitan Adler eitanadlerl...@gmail.com wrote:
On Sun, Feb 14, 2010 at 2:53 AM, Paul B Mahol one...@gmail.com wrote:
On 2/13/10, Eitan Adler eitanadlerl...@gmail.com wrote:
On Sun, Feb 14, 2010 at 12:31 AM, Paul B Mahol one...@gmail.com wrote:
On 2/13/10, Eitan
On 2/13/10, Eitan Adler eitanadlerl...@gmail.com wrote:
On Fri, Feb 12, 2010 at 1:12 PM, Paul B Mahol one...@gmail.com wrote:
On 2/11/10, Eitan Adler eitanadlerl...@gmail.com wrote:
What miniport driver, what arch, how to reproduce it?
a) no idea
b) Sorry for leaving that out: 8.0-RELEASE-p2
On 2/13/10, Eitan Adler eitanadlerl...@gmail.com wrote:
On Sun, Feb 14, 2010 at 12:31 AM, Paul B Mahol one...@gmail.com wrote:
On 2/13/10, Eitan Adler eitanadlerl...@gmail.com wrote:
On Fri, Feb 12, 2010 at 1:12 PM, Paul B Mahol one...@gmail.com wrote:
On 2/11/10, Eitan Adler eitanadlerl
On 2/11/10, Eitan Adler eitanadlerl...@gmail.com wrote:
What miniport driver, what arch, how to reproduce it?
a) no idea
b) Sorry for leaving that out: 8.0-RELEASE-p2 i386
c) Boot the computer and watch tty0
Does it happens also if you load module (bcmwl5_sys.ko) after boot via
kldload
On 2/11/10, Eitan Adler eitanadlerl...@gmail.com wrote:
Running freeBSD 8.0-RELEASE I got
NTOS: timer 0xc4817a08 timer fired even though canceled
from
http://fxr.watson.org/fxr/source/compat/ndis/subr_ntoskrnl.c?v=FREEBSD8
/*
* This should never happen, but complain
On 1/16/10, Paul B Mahol one...@gmail.com wrote:
On 1/11/10, Paul B Mahol one...@gmail.com wrote:
On 1/11/10, Bob Johnson fbsdli...@gmail.com wrote:
On 1/9/10, Paul B Mahol one...@gmail.com wrote:
On 12/16/09, Bob Johnson fbsdli...@gmail.com wrote:
I'm using an ExpressCard for wireless
On 2/1/10, Eitan Adler eitanadlerl...@gmail.com wrote:
It is a Broadcom card and I need ndis to use it. I do not know if the light
is attached to the wireless card though (it appears next to the power and
charging lights)
ndis0: Broadcom 802.11g Network Adapter mem 0xf470-0xf4703fff irq 18
On Sat, Jan 23, 2010 at 2:04 PM, Gautham Ganapathy
gaut...@lisphacker.org wrote:
Hi
After I bring all n/w interfaces down (/etc/rc.d/netif stop) and then
create an virtual interface over wpi0 in monitor mode (ifconfig wlan0
create wlandev wpi0 wlanmode monitor), the system crashes. Is there
On 1/18/10, Christoph Kukulies k...@kukulies.org wrote:
Paul B Mahol schrieb:
On 1/15/10, Christoph Kukulies k...@kukulies.org wrote:
I'm not sure wether syntax has changed but I wanted to cretae an wlan
acess point
and tried various things. Under 7.0 I got it working with the following
.
Maybe nobody knows ...
Xorg.conf(5)
On Mon, Jan 18, 2010 at 3:43 PM, Christoph Kukulies
k...@kukulies.orgwrote:
Paul B Mahol schrieb:
On 1/15/10, Christoph Kukulies k...@kukulies.org wrote:
I'm not sure wether syntax has changed but I wanted to cretae an wlan
acess
On 1/18/10, Christoph Kukulies k...@kukulies.org wrote:
Paul B Mahol schrieb:
On 1/18/10, Christoph Kukulies k...@kukulies.org wrote:
Craig Butler schrieb:
On Mon, 2010-01-18 at 16:25 +0100, Samuel Martin Moro wrote:
in my rc.conf:
ifconfig_rum0=DHCP wepmode on weptxkey 1 wepkey 1
On 1/11/10, Paul B Mahol one...@gmail.com wrote:
On 1/11/10, Bob Johnson fbsdli...@gmail.com wrote:
On 1/9/10, Paul B Mahol one...@gmail.com wrote:
On 12/16/09, Bob Johnson fbsdli...@gmail.com wrote:
I'm using an ExpressCard for wireless networking because there seems
to be no driver
in?
--
Christoph
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
--
Paul B Mahol
On 1/15/10, Anton Shterenlikht me...@bristol.ac.uk wrote:
This is my first wireless attempt. Please don't shoot
me for asking obvious questions.
Did you read ath(4) manual?
Ignore first two examples.
You need to create wlanX first.
--
Paul B Mahol
On 1/11/10, Bob Johnson fbsdli...@gmail.com wrote:
On 1/9/10, Paul B Mahol one...@gmail.com wrote:
On 12/16/09, Bob Johnson fbsdli...@gmail.com wrote:
I'm using an ExpressCard for wireless networking because there seems
to be no driver for the internal card in my laptop (and NDIS panics
not work fine with this PC card.
Then it could be bug in hardware(and in FreeBSD because it should
not hang) or id ed(4) or in anything else, so report is as a bug.
--
Paul B Mahol
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org
) at port
ed(4) appears to be driver for that card
--
Paul B Mahol
aaa
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
option.
--
Paul B Mahol
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
On 12/26/09, Roland Smith rsm...@xs4all.nl wrote:
On Fri, Dec 25, 2009 at 05:24:32PM +0100, Paul B Mahol wrote:
On 12/25/09, Carmel carmel...@hotmail.com wrote:
On Fri, 25 Dec 2009 15:29:20 +0100
Paul B Mahol one...@gmail.com replied:
Argh, sorry but 7.2 doesnt have NDIS usb support. You
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
--
Paul B Mahol
___
freebsd-questions
On 12/25/09, Paul B Mahol one...@gmail.com wrote:
On 12/24/09, Carmel carmel...@hotmail.com wrote:
FreeBSD-7.2
Argh, sorry but 7.2 doesnt have NDIS usb support. You need FreeBSD 8.0
___
freebsd-questions@freebsd.org mailing list
http
On 12/25/09, Carmel carmel...@hotmail.com wrote:
On Fri, 25 Dec 2009 15:29:20 +0100
Paul B Mahol one...@gmail.com replied:
Argh, sorry but 7.2 doesnt have NDIS usb support. You need FreeBSD 8.0
I have been reading up on this. So I assume that it is not possible to
get this adapter working
it ?
Ignore it, if_ndis.c just forgot to set IEEE80211_F_PRIVACY flag.
It set that flag mistakenly only when WEP is enabled.
--
Paul B Mahol
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe
On 11/30/09, Yuri y...@rawbw.com wrote:
After upgrading to 8.0 I am getting a new message: wlan0:
/ieee80211_new_state_locked: pending SCAN/ - RUN transition lost.
I use ndis driver with Broadcom WiFi card BCM94312MCGSG.
That is debug message temporarely enabled unconditionally and then
On 11/23/09, Samuel Martín Moro faus...@gmail.com wrote:
that may help:
my uname:
FreeBSD devel.axis.fr 7.2-RELEASE FreeBSD 7.2-RELEASE #0: Wed Oct 14
15:26:50 CEST 2009 r...@h2g2.axis.fr:/usr/obj/usr/src/sys/GENERIC i386
in rc.conf:
hostapd/dhcpd/ifconfig_rum0 are commented
On 11/23/09, Samuel Martín Moro faus...@gmail.com wrote:
OK...
ifconfig $itf -mediaopt hostap
removes hostap from options
scan/list scan are back...
sorry for wasting your time...
but it still doesn't answer to my other question:
how can you reset an interface configuration ?
On 8.0,
On 11/23/09, Samuel Martín Moro faus...@gmail.com wrote:
It is up
in my script, I do the following:
ifconfig $itf down
ifconfig $itf delete
ifconfig $itf up scan
var=$!
#some loop waiting ifconfig to stop, or killing it after 30 seconds
eval `ifconfig -v $itf list scan | sed
On 11/2/09, Chad Perrin per...@apotheon.com wrote:
If I want to start wpa_supplicant directly, and specify a particular
configuration file, I can do something like this:
wpa_supplicant -i iwi0 -c /path/to/wpa_alternate.conf
How would I specify the use of /path/to/wpa_alternate.conf in my
On 10/23/09, Yuri y...@rawbw.com wrote:
I tried to make system hybernate with 'acpiconf -s4' on my laptop.
It quickly turned off, but when I press the power button it boots like
no hybernate and begins to check disks.
What can be wrong?
OS S4 is not implemented, but BIOS S4 is possible on
On 10/9/09, Alex R a...@mailinglist.ahhyes.net wrote:
Hi Guys,
Is there any news on when the version of binutils that ships as part of
the base system will be updated? The version that ships with 7.x etc is
about 5 years old now.
It creates problems on amd64 when compiling mplayer (assembly
1 - 100 of 239 matches
Mail list logo
