Re: FreeBSD 9.1 fails to boot from CD on Notebook

2013-07-12 Thread Erich Dollansky
Hi On Fri, 12 Jul 2013 14:56:12 +0200 Martin Siebel msie...@gmx.de wrote: Any ideas about BIOS settings I may change? find out how how the CD drive is connected and then play with the settings fir this interface Erich I burnt the CD twice by the way, with different burning software

Re: routing issues to freebsd.org

2013-07-08 Thread Erich Dollansky
/ports/INDEX-9.bz2: No route to host www.freebsd.org.513 IN CNAME wfe0.ysv.freebsd.org. wfe0.ysv.freebsd.org. 1690IN A 8.8.178.110 Perhaps an issue on your end (probably on the reverse route)? it was the same story in Indonesia. Erich Traces look

Re: swap partition leads to instability?

2013-05-26 Thread Erich Dollansky
of the swap space. Erich ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org

Re: swap partition leads to instability?

2013-05-26 Thread Erich Dollansky
Hi, sorry for my English. Here is what I wanted to say. On Sun, 26 May 2013 16:09:06 +0700 Erich Dollansky erichsfreebsdl...@alogt.com wrote: Hi, On Sun, 26 May 2013 01:58:32 -0700 (PDT) M. V. bored_to_deat...@yahoo.com wrote: I have a 24/7 network server/gateway with FreeBSD-8.2

Re: Case sensitive usernames and sendmail - mystic voodoo

2013-05-26 Thread Erich Dollansky
this? http://www.linuxquestions.org/questions/linux-software-2/sendmail-unable-to-find-users-22290/ Erich ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd

Re: HP 2570p installation

2013-05-23 Thread Erich Dollansky
Hi, it might be a good idea to tell us from where you booted. The internal disk, an USB stick, a USB drive ... And of course, what was on that media. Erich On Thu, 23 May 2013 13:02:37 +0200 (CEST) Ludovit Koren ludovit.ko...@gmail.com wrote: Hi, I bought HP Elitebook 2570p(B6Q08EA). I

Re: List Spam Filtering

2013-05-16 Thread Erich Dollansky
of volunteers in different time zones to handle this and off we go. Of course, I could be one of them in the Eastern World. Erich ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any

Re: List Spam Filtering

2013-05-08 Thread Erich Dollansky
address. Erich ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org

Re: Witness on FreeBSD 10.*

2013-04-29 Thread Erich Dollansky
WITNESS # Enable checks to detect deadlocks and cycles options WITNESS_SKIPSPIN# Don't run witness on spinlocks for speed Ok, the formatting is different in the configuration file. Erich Thanks for any help. ~Al Plant - Honolulu, Hawaii - Phone: 808-284

Re: SMP boot differences between 8.4 and 9.1?

2013-04-27 Thread Erich Dollansky
are recognized but four under 9.1. Is this expected behavior? they are recognised but disabled. Is this the generic kernel? Erich ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe

Re: Upgrading from 7.4 to 9.1

2013-04-27 Thread Erich Dollansky
anymore. I have had to keep the machine on 7 until it got hit by a lightning. Has anyone tried that with success ? I plan to use the freebsd-update method. I never did this. I always use custom kernels. Erich ___ freebsd-questions@freebsd.org

Re: RSync exclusion

2013-04-19 Thread Erich Dollansky
is rooted in the directory I want to copy. Erich ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org

Re: Availability of downloads

2013-04-06 Thread Erich Dollansky
to the switch from CVS to SVN? Erich ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org

Re: gpart

2013-04-01 Thread Erich Dollansky
Hi, On Sun, 31 Mar 2013 21:06:24 -0500 Joshua Isom jri...@gmail.com wrote: On 3/31/2013 8:54 PM, Erich Dollansky wrote: I have had only one problem with this description. I could not boot from a GPT setup on my machine done as described there. But I have a disk done with PCBSD based

Re: gpart

2013-04-01 Thread Erich Dollansky
will always get the current port version. erich ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org

Re: use of the kernel and licensing

2013-04-01 Thread Erich Dollansky
as their base. Just where is the line drawn between a fork and a rewrite? just go back in history and find out why the ATT code in BSD was rewritten. Erich ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd

Re: gpart

2013-03-31 Thread Erich Dollansky
have is booting. The rest is all working perfectly. I am yet to use 9.1 to do so, so any tips would be appreciated. If you want this for serious servers, you might even consider 8.3, if your hardware is supported. Nothing beats the robustness of the older FreeBSD versions. Erich

Re: EOL

2013-03-29 Thread Erich Dollansky
, I would say that FreeBSD has the smoothest update and upgrade path. If you want something better, you would have to move to AIX or Solaris. Erich ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions

Re: line lengths in /etc/hosts

2013-03-27 Thread Erich Dollansky
line in /etc/hosts, like this: 127.0.0.1localhost localhost.my.domain bad1.com bad2.com ... My version of that line has gotten rather long :) AFAIK you can have multiple lines. yes, I have hundreds or even thousands of lines and never ran into any problems. Erich

Re: can not use intel GPU, no /dev/dri/card0

2013-03-24 Thread Erich Dollansky
device radeondrm you should not need the last line. Delete it and see what happens. Erich ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd

Re: can not use intel GPU, no /dev/dri/card0

2013-03-24 Thread Erich Dollansky
. Erich Cheers, Łukasz Gruner 2013/3/24 Erich Dollansky erichsfreebsdl...@alogt.com: Hi, On Sun, 24 Mar 2013 14:14:28 + uki uka...@gmail.com wrote: Hi, I'm getting the folowing error when I try to start X using intel drivers: [ 8669.844] (II) Loading /usr/local/lib

Re: Installing 9.1 without re-partitioning hard drive

2013-03-15 Thread Erich Dollansky
should have some kind of boot manager which will give you the choice between them. Of course, you can use whatever boot manager you want. The one which comes with FreeBSD is a bit simple but does its job. Erich ___ freebsd-questions@freebsd.org mailing list

Re: Using bsdinstall to create MBR

2013-03-12 Thread Erich Dollansky
tried gives an error message. I wanted one for / and one for swap. How do I create the two slices? I would recommend gpart. You can find out more here: http://www.wonkity.com/~wblock/docs/html/disksetup.html Erich ___ freebsd-questions@freebsd.org

Re: bsd lost partition recovery

2013-02-17 Thread Erich Dollansky
the Windows installation really went. Erich ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org

Re: bsd lost partition recovery

2013-02-17 Thread Erich Dollansky
Hi, On Sun, 17 Feb 2013 14:50:57 +0330 takCoder tak.offic...@gmail.com wrote: Thank you for your reply.. you are welcome. On Sun, Feb 17, 2013 at 2:31 PM, Erich Dollansky erichsfreebsdl...@alogt.com wrote: On Sun, 17 Feb 2013 12:56:54 +0330 takCoder tak.offic...@gmail.com wrote

Re: Cannot resolve localhost

2013-02-14 Thread Erich Dollansky
: NXDOMAIN What am I missing? nslookup queries a name server. It does not check your /etc/hosts. Erich ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd

Re: How to fix a broken owner for files from world build from ports?

2013-01-29 Thread Erich Dollansky
of failures. Erich ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org

Re: How to fix a broken owner for files from world build from ports?

2013-01-29 Thread Erich Dollansky
Hi, On Tue, 29 Jan 2013 12:57:30 +0100 Ralf Mardorf ralf.mard...@alice-dsl.net wrote: On Tue, 29 Jan 2013 12:44:55 +0100, Erich Dollansky erichsfreebsdl...@alogt.com wrote: It cannot get worse. His experience will show also others how robust FreeBSD is in case of failures. Indeed

creating bootable disk with gpart

2013-01-28 Thread Erich Dollansky
has an idea what is wrong or what I am doing wrong, please tell me. Erich ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org

Re: creating bootable disk with gpart

2013-01-28 Thread Erich Dollansky
Hi, On Mon, 28 Jan 2013 08:41:10 -0700 (MST) Warren Block wbl...@wonkity.com wrote: On Mon, 28 Jan 2013, Erich Dollansky wrote: Hi, I followed http://www.wonkity.com/~wblock/docs/html/disksetup.html to create bootable disks with GPT. As you know from my former post, I tried

Re: how do I restart lagg0 properly?

2013-01-28 Thread Erich Dollansky
of this sort at all. Erich ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org

Re: creating bootable disk with gpart

2013-01-28 Thread Erich Dollansky
Hi Warren, On Mon, 28 Jan 2013 08:41:10 -0700 (MST) Warren Block wbl...@wonkity.com wrote: On Mon, 28 Jan 2013, Erich Dollansky wrote: Hi, I followed http://www.wonkity.com/~wblock/docs/html/disksetup.html to create bootable disks with GPT. As you know from my former post, I tried

Re: creating bootable disk with gpart

2013-01-28 Thread Erich Dollansky
Hi, On Tue, 29 Jan 2013 08:08:19 +0700 Erich Dollansky erichsfreebsdl...@alogt.com wrote: Hi Warren, On Mon, 28 Jan 2013 08:41:10 -0700 (MST) Warren Block wbl...@wonkity.com wrote: On Mon, 28 Jan 2013, Erich Dollansky wrote: Hi, I followed http://www.wonkity.com/~wblock/docs

Re: Sharing a mail folder between Linux and FreeBSD

2013-01-27 Thread Erich Dollansky
run it as root. It should work afterword except for currently running programs. Erich ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr

Re: Sharing a mail folder between Linux and FreeBSD

2013-01-27 Thread Erich Dollansky
Hi, On Sun, 27 Jan 2013 13:58:06 +0100 Polytropon free...@edvax.de wrote: On Sun, 27 Jan 2013 15:38:38 +0700, Erich Dollansky wrote: Hi, On Sun, 27 Jan 2013 09:15:09 +0100 Ralf Mardorf ralf.mard...@rocketmail.com wrote: Good morning, ood morning? The sun is settling soon

Re: Sharing a mail folder between Linux and FreeBSD

2013-01-27 Thread Erich Dollansky
, but since I don't know where my source tree is, I can't continue. I think that you simply do not have one. At least not a current one. Read the handbook how you can get the source tree and then download and compile it. I believe that all other options will end in a re-installation. Erich

Re: Sharing a mail folder between Linux and FreeBSD

2013-01-25 Thread Erich Dollansky
'# find / -gid 1001 -exec chown :1000 '{}' \;' no messages Ctrl + Alt + F9 Without success I again read some important messages of this thread in the archive and googled regarding to the suid issue. Der Wald und die Baeume ... Erich ___ freebsd

Re: Sharing a mail folder between Linux and FreeBSD

2013-01-25 Thread Erich Dollansky
Hi Ralf, On Fri, 25 Jan 2013 13:39:07 +0100 Ralf Mardorf ralf.mard...@rocketmail.com wrote: On Fri, 25 Jan 2013 13:25:07 +0100, Erich Dollansky erichsfreebsdl...@alogt.com wrote: What happens on a normal TTY? Ctrl + Alt + F2 So, you can switch to them. Can you try a su here

Re: lagg problems (or lack of understanding?)

2013-01-25 Thread Erich Dollansky
instead of bge0. The lagg module is loaded during boot using an appropriate entry in /boot/loader.conf. if you could post your settings here? Erich ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd

Re: 9.0 9.1-RELEASE and HP Proliant DL 360 G3

2013-01-24 Thread Erich Dollansky
the settings for USB in the BIOS and I would take the CD drive out. Erich ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org

Re: Sharing a mail folder between Linux and FreeBSD

2013-01-24 Thread Erich Dollansky
/rocketmouse:/bin/sh musicpd:*LOCKED**:1002:1002:daemon:0:0:Music Player Daemon:/home/musicpd:/usr/sbin/nologin I repeated both find-chown several times and rebooted, nothing changed, it doesn't list any files anymore. did you run something like? /usr/sbin/pwd_mkdb -d/etc /etc/master.passwd erich

Re: Sharing a mail folder between Linux and FreeBSD

2013-01-21 Thread Erich Dollansky
with the id 1000 on this machine. Create one and that user will be able to access it. Erich ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr

Re: Sharing a mail folder between Linux and FreeBSD

2013-01-21 Thread Erich Dollansky
Hallo Ralf, On Tue, 22 Jan 2013 01:53:52 +0100 Ralf Mardorf ralf.mard...@rocketmail.com wrote: On Tue, 2013-01-22 at 07:31 +0700, Erich Dollansky wrote: On Tue, 22 Jan 2013 00:33:49 +0100 Ralf Mardorf ralf.mard...@rocketmail.com wrote: root@freebsd:/usr/home/rocketmouse # ls -l

Re: Sharing a mail folder between Linux and FreeBSD

2013-01-21 Thread Erich Dollansky
Hi, On Tue, 22 Jan 2013 02:31:11 +0100 Ralf Mardorf ralf.mard...@rocketmail.com wrote: On Tue, 2013-01-22 at 08:18 +0700, Erich Dollansky wrote: I guess it would be possible to change the id for the existing FreeBSD user and then to chown /home/user_name to fit to 1000? Of course

Re: Safe way to repair corrupted GPT partition table?

2013-01-19 Thread Erich Dollansky
Hi, On Sat, 19 Jan 2013 08:59:07 -0600 Bob Willcox b...@immure.com wrote: On Sat, Jan 19, 2013 at 07:25:09AM +0700, Erich Dollansky wrote: Hi, On Fri, 18 Jan 2013 14:08:25 -0600 Bob Willcox b...@immure.com wrote: Is there a way to repair a GPT partition table that has gotten

Re: Safe way to repair corrupted GPT partition table?

2013-01-18 Thread Erich Dollansky
on that disk. You can even copy the data with dd from the other disk after you are sure it will work. Of course, the size must match or must be made matching. Ok, it is not a safe way but it is a working way. Erich ___ freebsd-questions@freebsd.org

Re: SSH on FreeBSD

2013-01-15 Thread Erich Dollansky
? Looking forward to hear from you soon. Thank you you must enable ssh in /etc/inetd.conf and then read man ssh If you could tell us more what you really want, we could give you a better answer. Erich ___ freebsd-questions@freebsd.org mailing list http

Re: gpart, glabel and newfs -- what am I doing wrong

2013-01-13 Thread Erich Dollansky
Hi, On Sun, 13 Jan 2013 01:36:21 -0500 kpn...@pobox.com wrote: On Sun, Jan 13, 2013 at 08:09:00AM +0700, Erich Dollansky wrote: For what is glabel then still good? It is still useful for partition schemes that don't have labels (eg, MBR) AND the filesystem used doesn't support labels

gpart, glabel and newfs -- what am I doing wrong

2013-01-12 Thread Erich Dollansky
/label/Toshiba16GB2tmp # newfs /dev/label/Toshiba16GB2usr But newfs on the first partition results in this: Filesystem size 15 minimum size of 48 When I ran the newfs directly on the device, I get this: [X220]/home/erich (root) newfs /dev/da0p2 /dev/da0p2: 512.0MB (1048576 sectors) block size

Re: gpart, glabel and newfs -- what am I doing wrong

2013-01-12 Thread Erich Dollansky
Hi, On Sat, 12 Jan 2013 09:56:39 -0700 (MST) Warren Block wbl...@wonkity.com wrote: On Sat, 12 Jan 2013, Erich Dollansky wrote: in general, I try to create the partitions with gpart, add a label with glabel and put a filesystem. I think that I am doing something very simple the wrong

Re: BWN WLAN wpa_supplicant ssid mismatch no carrier

2013-01-12 Thread Erich Dollansky
is seeing the correct router ifconfig -v wlan0 list scan ... SSIDtddhome ... WPAv1 mc:AES-CCMP uc:AES-CCMP km:8021X-PSK ... What am I doing wrong? You must tell ifconfig which ssid to use. Erich ___ freebsd-questions@freebsd.org mailing list

Re: BWN WLAN wpa_supplicant ssid mismatch no carrier

2013-01-12 Thread Erich Dollansky
. But, this does not seem to have changed anything. leave the mode away. It should then use a mode which both bwn and the device will support. Erich ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd

Re: sound issue: play interrupt timeout, channel dead

2013-01-11 Thread Erich Dollansky
for other reasons. I got stuck with 10 after I saw that it solved my problem on that machine. Erich ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions

Re: suggestions wanted.... {OT}

2013-01-11 Thread Erich Dollansky
have this function built-in. My daughter has one I would still call a hand phone. She is very happy with it. The keyboard has to be an external one in all cases. I do not know it this works on all models. Erich ___ freebsd-questions@freebsd.org mailing

Re: 9.0 vs 9.1

2013-01-10 Thread Erich Dollansky
. Erich ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org ___ freebsd

Re: which version of FBSD should i install?

2013-01-09 Thread Erich Dollansky
Hi, On Tue, 8 Jan 2013 23:16:58 -0800 Gary Kline kl...@thought.org wrote: On Wed, Jan 09, 2013 at 12:55:49PM +0700, Erich Dollansky wrote: Hi, On Tue, 8 Jan 2013 18:55:04 -0800 Gary Kline kl...@thought.org wrote: ms well use my 2005 Thinkpad. it is reasonably fast

Re: keyboard and mouse problem

2013-01-09 Thread Erich Dollansky
an update? What should I do ? Can you test without mouse? To be honest, I was not able to get a system up with a PS/2 mouse or keyboard since years. I blamed it on the old hardware and got me a new keyboard and a new mouse with USB. Erich ___ freebsd

Re: which version of FBSD should i install?

2013-01-08 Thread Erich Dollansky
not arrive there yet. Erich ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org

Re: Trying to update from 9.0 to 9.1 via svn

2013-01-04 Thread Erich Dollansky
automatically deletes all object files automatically? Either a process is automated 100% or not at all is what I would say. Erich ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe

Re: utility to compare 2 dir trees

2012-12-31 Thread Erich Dollansky
compares the file hierarchy rooted in the current directory against a specification read from the standard input. Messages are written to the standard output for any files whose characteristics do not match the specifications, or which are missing from either the file hierarchy or the specification. Erich

Re: Upgrading FreeBSD 8.3 amd64

2012-12-20 Thread Erich Dollansky
hardware, source is the only route. I suspect if it's impossible or at least less good to mix binaries and from source build software for FreeBSD, I should chose to build from source. You can mix. If it works, it works. If not, it is most likely an option not compiled in you would need. Erich

Re: Upgrading FreeBSD 8.3 amd64

2012-12-19 Thread Erich Dollansky
immediately and this makes broken English not better ;). Do not worry about this here. I think, while you have been pretty clear on the rest, the last line does not make real sense to me. Erich ___ freebsd-questions@freebsd.org mailing list http

Re: i386 vs. amd64

2012-12-17 Thread Erich Dollansky
and start from there. 3. In general is amd64 now as capable of handling ports and such as well as i386 does? I saw that some ports I used to use on i386 went 100% smooth on amd64. I believe that this has improved even further. Just make the jump. Erich

Re: switching from i386 to amd64

2012-12-16 Thread Erich Dollansky
. Ok, flash is not realy working for me but I also do not miss it. Erich ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org

Re: FreeBSD Release Date Challenge, plus other stuff the project needs

2012-12-13 Thread Erich Dollansky
. Erich ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org ___ freebsd

Re: Questions not working again?

2012-12-07 Thread Erich Dollansky
? You could not post to it? You did not get any messages from it anymore? Erich Any way to fix this? ~Al Plant - Honolulu, Hawaii - Phone: 808-284-2740 + http://hawaiidakine.com + http://freebsdinfo.org + + http://aloha50.net - Supporting - FreeBSD 7.2 - 8.0 - 9* + email: n

Re: i am new with this

2012-12-03 Thread Erich Dollansky
/ timedirectory 123.023.02 localhost www.freebsd20.12.02 12h 23m www/videos At least my webserver does something like this. But I get a bit of more information. i hope you understand I hope so too. Erich

Re: Is FreeBSD 9 Production Ready?

2012-11-24 Thread Erich Dollansky
the 10.y branch. I retired my 7.4 only because of lightning strike this spring. Robustness is my main goal here. Any change which brings only the risk is avoided. Irony is now that I am writing you this on a 10.0 machine. Only 10 has had the support I needed for my new toy. Erich

Re: /usr/sbin/ppp doubling connections on tun0

2012-11-19 Thread Erich Dollansky
am running 10.0. Erich ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org

Re: Freebsd 9 Startx

2012-11-18 Thread Erich Dollansky
Intel KMS. Erich ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org

Re: well, try here first...

2012-11-14 Thread Erich Dollansky
Hi, On Wed, 14 Nov 2012 03:58:14 +0100 Polytropon free...@edvax.de wrote: On Wed, 14 Nov 2012 08:26:00 +0700, Erich Dollansky wrote: Hi, On Tue, 13 Nov 2012 17:07:38 -0800 Gary Kline kl...@thought.org wrote: On Wed, Nov 14, 2012 at 04:47:48AM +0700, Erich Dollansky wrote: Hi

Re: well, try here first...

2012-11-13 Thread Erich Dollansky
stuff is from OpenBSD.} Have you checked that tao is actually running a SSH server? ja vohl. futher dhclient is there. I'll go back to you wanted to say 'jawohl'? Erich ___ freebsd-questions@freebsd.org mailing list http

Re: high performance server design approach

2012-11-13 Thread Erich Dollansky
for handling the tasks of the OS. If I remember right, I took 10% of the cores plus one which I did not use and I took at least one core. This is all from memory. So, please consider that I could have missed something out. Erich ___ freebsd-questions

Re: Some thoughts about upgrading from 8.3 to 9.1

2012-11-13 Thread Erich Dollansky
always via source but I am prepared to hit a wall between. The number of walls are very low meanwhile. The advantage of a normal upgrade via sources are so many that I always risk it. But I make sure that I have the option of re-installation at hand. Erich

Re: well, try here first...

2012-11-13 Thread Erich Dollansky
Hi, On Tue, 13 Nov 2012 11:00:07 -0800 Gary Kline kl...@thought.org wrote: On Tue, Nov 13, 2012 at 09:12:55AM +0100, Polytropon wrote: On Tue, 13 Nov 2012 15:10:33 +0700, Erich Dollansky wrote: Hi, On Mon, 12 Nov 2012 23:57:21 -0800 Gary Kline kl...@thought.org wrote

Re: well, try here first...

2012-11-13 Thread Erich Dollansky
Hi, On Tue, 13 Nov 2012 17:07:38 -0800 Gary Kline kl...@thought.org wrote: On Wed, Nov 14, 2012 at 04:47:48AM +0700, Erich Dollansky wrote: Hi, On Tue, 13 Nov 2012 11:00:07 -0800 Gary Kline kl...@thought.org wrote: On Tue, Nov 13, 2012 at 09:12:55AM +0100, Polytropon wrote

Re: well, try here first...

2012-11-12 Thread Erich Dollansky
, very obvious. But I know how it feels if one cannot see the tiny thing. Erich ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr

Re: ata controller problem

2012-10-27 Thread Erich Dollansky
seems to fit most scenarios. Labels came up to solve your problem. Erich ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org

Re: ata controller problem

2012-10-27 Thread Erich Dollansky
of current media. Erich ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org

Re: FreeBSD help require for DellpowerEdge R620

2012-10-26 Thread Erich Dollansky
this and you should be able to get some FreeBSD running. Erich ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org

Re: FreeBSD help require for DellpowerEdge R620

2012-10-26 Thread Erich Dollansky
that I have forgotten the links in my former e-mail. As they would have been the same, I do not have to repeat them here. Erich ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe

Re: ata controller problem

2012-10-26 Thread Erich Dollansky
this help when media is moved between machines? Erich ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org

Re: kernel config

2012-10-25 Thread Erich Dollansky
is build. You can then build three versions of it. One with nothing, one with the modules you want and one with the non-conflicting modules build-in. Just read the handbook regarding custom kernels. Erich ___ freebsd-questions@freebsd.org mailing list

Re: kernel config

2012-10-25 Thread Erich Dollansky
Hi, On Thu, 25 Oct 2012 07:26:27 + (UTC) jb jb.1234a...@gmail.com wrote: Erich Dollansky erichfreebsdlist at ovitrap.com writes: ... Just check how a custom kernel is build. You can then build three versions of it. One with nothing, one with the modules you want and one

Re: rc.conf and loader.conf

2012-10-25 Thread Erich Dollansky
you need to get the best solution for your needs. Erich Best regards, Ashkan ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr

Re: way way off topic

2012-10-24 Thread Erich Dollansky
Hi, On Wed, 24 Oct 2012 10:23:17 +0200 Polytropon free...@edvax.de wrote: On Wed, 24 Oct 2012 08:39:55 +0700, Erich Dollansky wrote: Hi, On Tue, 23 Oct 2012 18:13:05 -0700 Gary Kline kl...@thought.org wrote: On Tue, Oct 23, 2012 at 05:52:02PM -0700, Gezeala M. Bacuño II wrote

Re: way way off topic

2012-10-23 Thread Erich Dollansky
programs are not self-explanatory? Erich ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org

Re: license

2012-10-22 Thread Erich Dollansky
a permission for using Beastie or it is free or I cannot use. you can find out more here: http://en.wikipedia.org/wiki/BSD_Daemon Marshall Kirk McKusick is the copyright holder. Just address him directly. Erich Thank you. Mitja http://www.redbubble.com/people/lumiwa

Re: Question regarding a server with an unsupported old version

2012-10-22 Thread Erich Dollansky
Hi, On Tue, 23 Oct 2012 11:32:15 +0900 Rei Okamoto okam...@mix-net.co.jp wrote: Hi Adam, Olivier, Erich, and the rest, Thank you for your replies. It sounds like the best thing to do is to migrate the contents to a server with new versions of all softwares. this is the ideal solution

Re: way way off topic

2012-10-22 Thread Erich Dollansky
? I would multiply the age of john and the difference with 100 and then divide the result to get the percentage. Or did I get lost here? if this seems dumb, I plead guilty! im asking here because -questions is the sharpest list on the net. Are you sure? Erich

Re: Question regarding a server with an unsupported old version

2012-10-21 Thread Erich Dollansky
be perfect. But I do not know if you can get the client's web sites running on a current PHP version. Erich ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd

Spam and more spam

2012-10-20 Thread Erich Dollansky
, it worked. Should we move to a list where only registered users can write just to avoid the spam problem and not forcing a human to approve all e-mails from addresses which are not registered? Erich ___ freebsd-questions@freebsd.org mailing list http

Re: Spam and more spam.

2012-10-12 Thread Erich Dollansky
Hi Gary, On Thu, 11 Oct 2012 22:03:49 -0700 Gary Kline kl...@thought.org wrote: On Fri, Oct 12, 2012 at 10:49:34AM +0700, Erich Dollansky wrote: On Thu, 11 Oct 2012 13:43:13 -0700 Gary Kline kl...@thought.org wrote: On Thu, Oct 11, 2012 at 01:27:30PM +0700, Erich Dollansky wrote

Re: Spam and more spam.

2012-10-11 Thread Erich Dollansky
Hi, On Wed, 10 Oct 2012 23:04:48 -0700 Gary Kline kl...@thought.org wrote: On Wed, Oct 10, 2012 at 05:06:11PM -1000, Al Plant wrote: Erich Dollansky wrote: Hi, On Wed, 10 Oct 2012 19:39:12 +1100 andrew clarke m...@ozzmosis.com wrote: On Wed 2012-10-10 10:16:35 UTC+0200, René

Re: Spam and more spam.

2012-10-11 Thread Erich Dollansky
Hi Gary, On Thu, 11 Oct 2012 13:43:13 -0700 Gary Kline kl...@thought.org wrote: On Thu, Oct 11, 2012 at 01:27:30PM +0700, Erich Dollansky wrote: Hi, hello erich and everyone, im getting too aged [and achy and cranky:)] to sleep well, oh, do you have a Windows machine

Re: Info 2 Release

2012-10-10 Thread Erich Dollansky
did an classified this as spam. Erich ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org

Re: Info 2 Release

2012-10-10 Thread Erich Dollansky
? I think that the original poster is the one who suffers most. Erich ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org

Re: Spam and more spam.

2012-10-10 Thread Erich Dollansky
Hi Al, On Wed, 10 Oct 2012 17:06:11 -1000 Al Plant n...@hdk5.net wrote: Erich Dollansky wrote: I wonder how many people did what I did an classified this as spam. Aloha Erich, my wife loves you. This is for sure. Why? She loves your place. I'm getting SPAM on the FreeBSD list

Re: suggest pdf viewer for pdf version 1.6 with annotations

2012-10-03 Thread Erich Dollansky
it installed at the moment, so I am not able to tell you. Erich ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org

Re: Port update hosed entire system

2012-10-01 Thread Erich Dollansky
not find any space even just for a restart? Erich ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org

  1   2   3   4   5   >