Hornet wrote:
Ahh, but awkwardness and upgrading is almost always synonymous.
Awkwardness was one of the words I used, there have been some others ;-).
Maybe you can get a USB floppy drive and try to console that way? You
may want to also look at the BIOS and see if there is an update or
Jim Mozley wrote:
I'm trying to install 5.4 on a system that currently has 4.10 on it. My
problem is that when the system boots from the install disk 1 I cannot
see the initial menu due to a display problem.
I see the initial boot information then the box that should have the
selection
Hornet wrote:
Can you swap out the video card as a temp solution?
Thanks for the response.
This would not really be practical, I have several servers that may need
upgrading on different sites. They are 1U rack mount servers in
different data centres and it would make upgrading very
I'm trying to install 5.4 on a system that currently has 4.10 on it. My
problem is that when the system boots from the install disk 1 I cannot
see the initial menu due to a display problem.
I see the initial boot information then the box that should have the
selection options in, but without
Steve Bertrand wrote:
I have a box with the same chipset. I have 2 160GB SATA drives in a
RAID1 config, which FBSD 5.4 sees 2 disks, as opposed to the single RAID
subsystem. I install on one of the disks.
However, when I reboot the box, I get a flashing cursor in the top left
corner of the
I have asked this on freebsd-hardware but didn't hear anything so I
hoped someone here could help...
I am potentially buying a server with a Tyan Tomcat i7221 motherboard. I
am unsure of the support in FreeBSD for the following:
- ICH6R disk controller
- Broadcom BCM5721 ethernet
Ideally I
I have asked this on freebsd-hardware but didn't hear anything so I
hoped someone here could help...
I am potentially buying a server with a Tyan Tomcat i7221 motherboard. I
am unsure of the support in FreeBSD for the following:
- ICH6R disk controller
- Broadcom BCM5721 ethernet
Ideally I
[EMAIL PROTECTED] wrote:
Hi Jim,
I think it's not a answer to you but here is my recent experience.
I've installed FBSD 5.4 in a box with Intel ICH5R chipset.
It's working, no hangs, no panics, but the disk performance on the
second IDE disk (I'm not using RAID, just
not be better? Any password would still
be guessable.
Jim Mozley
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
documentation but am
getting buried under a wealth of new information. Any clues would be
helpful.
Thanks,
Jim Mozley
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
10 matches
Mail list logo
