9.1-release bridge config at startup not working

Hello list After pretty much of googling I was able to make this bridge setup up and running: cloned_interfaces=bridge0 ifconfig_bridge0=addm igb6 addm igb7 ifconfig_bridge0_alias0=inet x.x.x.x netmask x.x.x.x ifconfig_igb6=up ifconfig_igb7=up however I'm running xorp pim multicast router on

FreeBSD 9.1 igb flow controll

Hello How can I enable/disable flow control on igb NIC? Thanks igb7: flags=8c02BROADCAST,OACTIVE,SIMPLEX,MULTICAST metric 0 mtu 1500 options=401bbRXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,VLAN_HWTSO

9.0 9.1-RELEASE and HP Proliant DL 360 G3

Hello Is there anybody runnign 9.0 and newer on HP Proliant DL 360 G3? I'm not able to install anything newer than 8.3 on any of my Proliant G3 boxes. Binary upgrade process from 8.3-RELEASE to 9.0-RELEASE after kernel upgrade hangs at boot at the same place: (8.3-RELEASE dmesg is at the bottom

Re: A quality operating system

+10 I really like ppl thinking, that someone will create/develop/maitain an OS just for them. There are hundreds of chocices: OpenBSD, FreeBSD, NetBSD, + forks, Windoze, hundreds (and growing) of different linux distros, Solaris, Minix, vxworks, even MSDOS :) Feel free to choose. If there will be

ZFSRoot on ProLiant DL360 G3

Hello list I have by a change a couple of currently unused old ProLiant DL360 G3 1U servers. With default 8.2-RELEASE the box works nicely. But I was wondering if I would be able to boot it from ZFSRoot, as I did with other boxes and after following:

ProLiant DL360 G3 and ZFSRoot

Hello list I have by a change a couple of currently unused old ProLiant DL360 G3 1U servers. With default 8.2-RELEASE the box works nicely. But I was wondering if I would be able to boot it from ZFSRoot, as I did with other boxes and after following: