thai keyboard and blackbox
hi sirs, am using blackbox version 0.70.1 with my box %uname -a FreeBSD siting.oaep.go.th 6.1-RELEASE FreeBSD 6.1-RELEASE #0: Thu Jun 22 10:32:26 ICT 2006 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/GENERIC i386 % since i have thai language keyboard and i want to using thai for some time, thai can be displayed correctly and clearly with blackbox, but i do not know what key (or keys) combination to switch from english to thai and vise versa ? thanks in advance for any helps and hints. -- with best regards, psr http://www.thai-aec.org This message was sent using Inet-Webmail. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
(etherape:1583): Gtk-WARNING **: cannot open display:
hi sirs, yesterday, i launched etherape to em0 nic, etherape -i em0, and got that message. before that there was no error. worse is that root can not launch any x applications except xterm, it get the same error messages. here is uname of my r51 thinkpad %uname -a FreeBSD siting.oaep.go.th 6.1-RELEASE FreeBSD 6.1-RELEASE #0: Sun May 14 18:00:24 ICT 2006 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/SITING i386 % and ifconfig %ifconfig -a fwe0: flags=108902BROADCAST,PROMISC,SIMPLEX,MULTICAST,NEEDSGIANT mtu 1500 options=8VLAN_MTU inet6 fe80::6:1bff:fe02:b8fb%fwe0 prefixlen 64 scopeid 0x1 ether 02:06:1b:02:b8:fb ch 1 dma -1 em0: flags=8843UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST mtu 1500 options=bRXCSUM,TXCSUM,VLAN_MTU inet6 fe80::211:25ff:feb2:23be%em0 prefixlen 64 scopeid 0x2 inet 10.3.2.25 netmask 0xff00 broadcast 10.3.2.255 ether 00:11:25:b2:23:be media: Ethernet autoselect (100baseTX full-duplex) status: active ath0: flags=8843UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST mtu 1500 inet6 fe80::20e:9bff:fea3:d91a%ath0 prefixlen 64 scopeid 0x3 ether 00:0e:9b:a3:d9:1a media: IEEE 802.11 Wireless Ethernet autoselect (OFDM/36Mbps) status: associated ssid Reactor channel 6 bssid 00:15:e9:40:17:98 authmode OPEN privacy OFF txpowmax 34 protmode CTS burst bintval 100 plip0: flags=108810POINTOPOINT,SIMPLEX,MULTICAST,NEEDSGIANT mtu 1500 lo0: flags=8049UP,LOOPBACK,RUNNING,MULTICAST mtu 16384 inet6 ::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5 inet 127.0.0.1 netmask 0xff00 % and below is dmesg %dmesg Copyright (c) 1992-2006 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 6.1-RELEASE #0: Sun May 14 18:00:24 ICT 2006 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/SITING Timecounter i8254 frequency 1193182 Hz quality 0 CPU: Intel(R) Pentium(R) M processor 1.60GHz (1594.83-MHz 686-class CPU) Origin = GenuineIntel Id = 0x6d6 Stepping = 6 Features=0xafe9f9bfFPU,VME,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE Features2=0x180EST,TM2 real memory = 1064173568 (1014 MB) avail memory = 1032421376 (984 MB) kbd1 at kbdmux0 ath_hal: 0.9.16.16 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) acpi0: IBM TP-1V on motherboard acpi_ec0: Embedded Controller: GPE 0x1c, ECDT port 0x62,0x66 on acpi0 acpi0: Power Button (fixed) Timecounter ACPI-fast frequency 3579545 Hz quality 1000 acpi_timer0: 24-bit timer at 3.579545MHz port 0x1008-0x100b on acpi0 cpu0: ACPI CPU on acpi0 acpi_perf0: ACPI CPU Frequency Control on cpu0 acpi_throttle0: ACPI CPU Throttling on cpu0 acpi_lid0: Control Method Lid Switch on acpi0 acpi_button0: Sleep Button on acpi0 pcib0: ACPI Host-PCI bridge port 0xcf8-0xcff on acpi0 pci0: ACPI PCI bus on pcib0 pci0: base peripheral at device 0.1 (no driver attached) pci0: base peripheral at device 0.3 (no driver attached) agp0: Intel 82855GME (855GME GMCH) SVGA controller port 0x1800-0x1807 mem 0xe000-0xe7ff,0xd000-0xd007 irq 11 at device 2.0 on pci0 agp0: detected 8060k stolen memory agp0: aperture size is 128M pci0: display at device 2.1 (no driver attached) uhci0: Intel 82801DB (ICH4) USB controller USB-A port 0x1820-0x183f irq 11 at device 29.0 on pci0 uhci0: [GIANT-LOCKED] usb0: Intel 82801DB (ICH4) USB controller USB-A on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: Intel 82801DB (ICH4) USB controller USB-B port 0x1840-0x185f irq 11 at device 29.1 on pci0 uhci1: [GIANT-LOCKED] usb1: Intel 82801DB (ICH4) USB controller USB-B on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: Intel 82801DB (ICH4) USB controller USB-C port 0x1860-0x187f irq 11 at device 29.2 on pci0 uhci2: [GIANT-LOCKED] usb2: Intel 82801DB (ICH4) USB controller USB-C on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered ehci0: Intel 82801DB/L/M (ICH4) USB 2.0 controller mem 0xd010-0xd01003ff irq 11 at device 29.7 on pci0 ehci0: [GIANT-LOCKED] usb3: EHCI version 1.0 usb3: companion controllers, 2 ports each: usb0 usb1 usb2 usb3: Intel 82801DB/L/M (ICH4) USB 2.0 controller on ehci0 usb3: USB revision 2.0 uhub3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub3: 6 ports with 6 removable, self powered umass0: vendor 0x05e3 USB TO IDE, rev 2.00/0.33, addr 2 pcib1: ACPI PCI-PCI bridge at device 30.0 on pci0 pci2: ACPI PCI bus on pcib1 cbb0: TI4510 PCI-CardBus Bridge mem 0xb000-0xbfff irq 11 at device 0.0 on pci2 cardbus0: CardBus bus on cbb0 pccard0: 16-bit PCCard bus on cbb0 fwohci0: 1394 Open
GENERIC kernel for 6.0
hi sirs, i have just found that GENERIC kernel for 6.0 does not have isa and npx. that resulted in ps/2 mouse can not be enable. the machine is del inspiron-1100 and when using it's system software to test for ps/2 mouse, it is working properly. would you please give me some hints on this problem ? thanks in advance for your times. with best regards, psr ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
shutdown failed
hi sirs, my machine is thinkpad r51 with FreeBSD siting.thai-aec.org 6.0-STABLE FreeBSD 6.0-STABLE #0: Tue Nov 15 11:38:48 ICT 2005 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/SITING i386 which is now attached to r51 via usb port as da0. i can start freebsd from this device but upon shutdown i got errors that say synchronize cahce failed, status == 0xb, scsi status == 0x0 panic: umass_cam_cb func-code -481711512 and die and i need to power down manually. here is dmesg for your information %dmesg Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 6.0-STABLE #0: Tue Nov 15 11:38:48 ICT 2005 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/SITING Timecounter i8254 frequency 1193182 Hz quality 0 CPU: Intel(R) Pentium(R) M processor 1.60GHz (1594.83-MHz 686-class CPU) Origin = GenuineIntel Id = 0x6d6 Stepping = 6 Features=0xafe9f9bfFPU,VME,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE Features2=0x180EST,TM2 real memory = 1064173568 (1014 MB) avail memory = 1032466432 (984 MB) npx0: [FAST] npx0: math processor on motherboard npx0: INT 16 interface acpi0: IBM TP-1V on motherboard acpi_ec0: Embedded Controller: GPE 0x1c, ECDT port 0x62,0x66 on acpi0 acpi0: Power Button (fixed) pci_link0: ACPI PCI Link LNKA irq 11 on acpi0 pci_link1: ACPI PCI Link LNKB irq 11 on acpi0 pci_link2: ACPI PCI Link LNKC irq 11 on acpi0 pci_link3: ACPI PCI Link LNKD irq 11 on acpi0 pci_link4: ACPI PCI Link LNKE irq 11 on acpi0 pci_link5: ACPI PCI Link LNKF irq 11 on acpi0 pci_link6: ACPI PCI Link LNKG on acpi0 pci_link7: ACPI PCI Link LNKH irq 11 on acpi0 Timecounter ACPI-fast frequency 3579545 Hz quality 1000 acpi_timer0: 24-bit timer at 3.579545MHz port 0x1008-0x100b on acpi0 cpu0: ACPI CPU on acpi0 acpi_perf0: ACPI CPU Frequency Control on cpu0 acpi_throttle0: ACPI CPU Throttling on cpu0 acpi_lid0: Control Method Lid Switch on acpi0 acpi_button0: Sleep Button on acpi0 pcib0: ACPI Host-PCI bridge port 0xcf8-0xcff on acpi0 pci0: ACPI PCI bus on pcib0 pci0: base peripheral at device 0.1 (no driver attached) pci0: base peripheral at device 0.3 (no driver attached) agp0: Intel 82855GME (855GME GMCH) SVGA controller port 0x1800-0x1807 mem 0xe000-0xe7ff,0xd000-0xd007 irq 11 at device 2.0 on pci0 agp0: detected 8060k stolen memory agp0: aperture size is 128M pci0: display at device 2.1 (no driver attached) uhci0: Intel 82801DB (ICH4) USB controller USB-A port 0x1820-0x183f irq 11 at device 29.0 on pci0 uhci0: [GIANT-LOCKED] usb0: Intel 82801DB (ICH4) USB controller USB-A on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: Intel 82801DB (ICH4) USB controller USB-B port 0x1840-0x185f irq 11 at device 29.1 on pci0 uhci1: [GIANT-LOCKED] usb1: Intel 82801DB (ICH4) USB controller USB-B on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: Intel 82801DB (ICH4) USB controller USB-C port 0x1860-0x187f irq 11 at device 29.2 on pci0 uhci2: [GIANT-LOCKED] usb2: Intel 82801DB (ICH4) USB controller USB-C on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered pci0: serial bus, USB at device 29.7 (no driver attached) pcib1: ACPI PCI-PCI bridge at device 30.0 on pci0 pci2: ACPI PCI bus on pcib1 cbb0: TI4510 PCI-CardBus Bridge mem 0xb000-0xbfff irq 11 at device 0.0 on pci2 cardbus0: CardBus bus on cbb0 pccard0: 16-bit PCCard bus on cbb0 fwohci0: 1394 Open Host Controller Interface mem 0xb100-0xb10007ff,0xd021-0xd0213fff irq 11 at device 0.1 on pci2 fwohci0: OHCI version 1.10 (ROM=0) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:06:1b:03:24:02:b8:fb fwohci0: Phy 1394a available S400, 2 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: IEEE1394(FireWire) bus on fwohci0 fwe0: Ethernet over FireWire on firewire0 if_fwe0: Fake Ethernet address: 02:06:1b:02:b8:fb fwe0: Ethernet address: 02:06:1b:02:b8:fb fwe0: if_start running deferred for Giant sbp0: SBP-2/SCSI over FireWire on firewire0 fwohci0: Initiate bus reset fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode firewire0: 1 nodes, maxhop = 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) em0: Intel(R) PRO/1000 Network Connection, Version - 2.1.7 port 0x7000-0x703f mem 0xd022-0xd023 irq 11 at device 1.0 on pci2 em0: Ethernet address: 00:11:25:b2:23:be em0: Speed:N/A Duplex:N/A pci2: network, ethernet at device 2.0 (no driver attached) isab0: PCI-ISA bridge at device 31.0 on pci0 isa0: ISA bus on isab0 atapci0: Intel ICH4 UDMA100 controller port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1810-0x181f at device 31.1 on pci0 ata0: ATA channel 0 on atapci0 ata1: ATA
Re: sos: boot fail
Mike Tancsa wrote: On Fri, 17 Feb 2006 10:11:15 +0700, in sentex.lists.freebsd.questions you wrote: i can not boot into single user mode or safe mode. please help me. and cc to me too. Try and boot to your previous kernel. If that is broken for some reason as well, boot with something like Fresbie and install a generic kernel on your disk and boot with it. i use this way but have to pay for lossing /etc/rc.con file, old one. furthermore, my mouse does not move and get this message during boot unable to open /dev/psm0: No such file or directory. anyway, thanks so much indeed for your helps and hints. To boot an older kernel, in the boot menu, escape to the loader prompt type unload load /boot/kernel.old/kernel load /boot/kernel.old/acpi.ko boot ---Mike Mike Tancsa, Sentex communications http://www.sentex.net Providing Internet Access since 1994 [EMAIL PROTECTED], (http://www.tancsa.com) with best regards, psr ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
sos: boot fail
hi sirs,
i have many problem with gnome2 2.12 once i upgraded to 6.0. i finally
re cvsup to 5.4 release and did a sery of make {build,install}world and
make kernel to 5.4 generic kernel.
while in 5.4 generic kernel i did pkg_delete -fa and start from nill
making xorg, teTeX, docproj-jade, xemacs, gnome2 without any problem at
the same time i did a customized kernel with many problem. i had to
disable sio, parallel port and so on. after finished making gnome2, i
startx i got a black text screen in a few second.
so my instink told me that may be because of kernel so that i did reboot
to a new kernel and i got this staring at me
instruction poiter = 0x0:0xa00
stack poiter =0x0:0xffe
frame pointer= 0x0:0x0
code segment= base 0x0, limit 0x0, type 0x0
= DPL 0, pres 0, def32 0, gran 0
processor eflags= interrup enable, vm86, IOPL = 0
current process = 0 ()
trap number = 30
panic: unknown/reserved trap
Uptime: 1s
i can not boot into single user mode or safe mode.
please help me. and cc to me too.
thanks in advance for any helps and hints
with best regards,
psr
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: ports : make index failed
Duane Whitty wrote: Pirat SRIYOTHA wrote: hi sirs, after cvsup the ports tree , i make index but get errors. it said inspiron# cat /usr/ports/make-index Script started on Mon Jan 30 07:10:38 2006 You have mail. inspiron# uname -a FreeBSD inspiron.thai-aec.org 6.0-STABLE FreeBSD 6.0-STABLE #3: Tue Jan 24 18:17:06 ICT 2006 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/INSPIRON i386 inspiron# make index Generating INDEX-6 - please wait../usr/local/bin/php-config: not found grep: /usr/local/include/php/main/php_config.h: No such file or directory make: don't know how to make describe. Stop === mail/thunderbird-devel failed *** Error code 1 1 error Before reporting this error, verify that you are running a supported version of FreeBSD (see http://www.FreeBSD.org/ports/) and that you have a complete and up-to-date ports collection. (INDEX builds are not supported with partial or out-of-date ports collections -- in particular, if you are using cvsup, you must cvsup the ports-all collection, and have no refuse files.) If that is the case, then report the failure to [EMAIL PROTECTED] together with relevant details of your ports configuration (including FreeBSD version, your architecture, your environment, and your /etc/make.conf settings, especially compiler flags and WITH/WITHOUT settings). Note: the latest pre-generated version of INDEX may be fetched automatically with make fetchindex. *** Error code 1 Stop in /usr/ports. *** Error code 1 Stop in /usr/ports. inspiron# exit exit Script done on Mon Jan 30 07:37:55 2006 /etc/make.conf X_WINDOW_SYSTEM=xorg DOC_LANG=en_US.ISO8859-1 # added by use.perl 2006-01-13 14:51:17 PERL_VER=5.8.7 PERL_VERSION=5.8.7 FORCR_PKG_REGISTER=yes setenv USER=root HOME=/root SHELL=/bin/csh PATH=/sbin:/bin:/usr/sbin:/usr/bin:/usr/games:/usr/local/sbin:/usr/local/bin:/usr/X11R6/bin:/root/bin MAIL=/var/mail/root BLOCKSIZE=K FTP_PASSIVE_MODE=YES TERM=xterm HOSTTYPE=FreeBSD VENDOR=intel OSTYPE=FreeBSD MACHTYPE=i386 SHLVL=1 PWD=/usr LOGNAME=root GROUP=wheel HOST=inspiron.thai-aec.org REMOTEHOST=siting.thai-aec.org EDITOR=vi PAGER=more inspiron# i have no 'refuse' file at all. and as far as i know, php has nothing to do with port tree at the very beginning. would you please clarify this issue for me? thanks in advance for any comments and please cc to me since i do not subscribe to this list. with best regards, psr ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] Hello everyone, I am curious about the CVS refuse files. I could find no mention of refuse files in the Cederqvist, but does it perhaps refer to the ..cvsignore files which tells CVS which items to ignore (i.e. not fetch when updating the ports tree) Thanks for your help and patience with us newbies. --Best Regards Duane Whitty -- [EMAIL PROTECTED] thanks indeed Duane Whitty. up to today, i have no idea what happen to my box ? will this affect to any ports that will be built ? with best regards, psr ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
ports : make index failed
hi sirs, after cvsup the ports tree , i make index but get errors. it said inspiron# cat /usr/ports/make-index Script started on Mon Jan 30 07:10:38 2006 You have mail. inspiron# uname -a FreeBSD inspiron.thai-aec.org 6.0-STABLE FreeBSD 6.0-STABLE #3: Tue Jan 24 18:17:06 ICT 2006 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/INSPIRON i386 inspiron# make index Generating INDEX-6 - please wait../usr/local/bin/php-config: not found grep: /usr/local/include/php/main/php_config.h: No such file or directory make: don't know how to make describe. Stop === mail/thunderbird-devel failed *** Error code 1 1 error Before reporting this error, verify that you are running a supported version of FreeBSD (see http://www.FreeBSD.org/ports/) and that you have a complete and up-to-date ports collection. (INDEX builds are not supported with partial or out-of-date ports collections -- in particular, if you are using cvsup, you must cvsup the ports-all collection, and have no refuse files.) If that is the case, then report the failure to [EMAIL PROTECTED] together with relevant details of your ports configuration (including FreeBSD version, your architecture, your environment, and your /etc/make.conf settings, especially compiler flags and WITH/WITHOUT settings). Note: the latest pre-generated version of INDEX may be fetched automatically with make fetchindex. *** Error code 1 Stop in /usr/ports. *** Error code 1 Stop in /usr/ports. inspiron# exit exit Script done on Mon Jan 30 07:37:55 2006 /etc/make.conf X_WINDOW_SYSTEM=xorg DOC_LANG=en_US.ISO8859-1 # added by use.perl 2006-01-13 14:51:17 PERL_VER=5.8.7 PERL_VERSION=5.8.7 FORCR_PKG_REGISTER=yes setenv USER=root HOME=/root SHELL=/bin/csh PATH=/sbin:/bin:/usr/sbin:/usr/bin:/usr/games:/usr/local/sbin:/usr/local/bin:/usr/X11R6/bin:/root/bin MAIL=/var/mail/root BLOCKSIZE=K FTP_PASSIVE_MODE=YES TERM=xterm HOSTTYPE=FreeBSD VENDOR=intel OSTYPE=FreeBSD MACHTYPE=i386 SHLVL=1 PWD=/usr LOGNAME=root GROUP=wheel HOST=inspiron.thai-aec.org REMOTEHOST=siting.thai-aec.org EDITOR=vi PAGER=more inspiron# i have no 'refuse' file at all. and as far as i know, php has nothing to do with port tree at the very beginning. would you please clarify this issue for me? thanks in advance for any comments and please cc to me since i do not subscribe to this list. with best regards, psr ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
libgdk_pixbuf-2.0.so.600
hi sirs, while doing make in gnome2, i face this error /libexec/ld-elf.so.1: Shared object libgdk_pixbuf-2.0.so.600 not found required by gdk-pixbuf-qurey-loaders it stopped at librsvg2. in my machine i found only libgdk_pixbuf-2.0.so.400. my machine is inspiron# uname -a FreeBSD inspiron.thai-aec.org 6.0-STABLE FreeBSD 6.0-STABLE #2: Fri Jan 13 13:52:56 ICT 2006 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/INSPIRON i386 inspiron# i tried to install gnome 2.12 so many time since december 2005. please cc to me since i do not a member of this list. TIA with best regards, psr ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
make release
hi sirs, am trying to make my own release by `make release -DNOGAME' at /usr/src/release with 5.4 notebook. i want to have packages that have been built included into disc1.iso too but i get only 198mb of src and ports and some others instead. would you please give me some hints on doing this ? please cc to me since i do not subscripe to the list. thanks in advance for any helps and hints. -- with best regards, psr http://www.thai-aec.org This message was sent using Inet-Webmail. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: chflags uid 0 exited on signal 12 (core dump) Bad system call
Quoting Kris Kennaway [EMAIL PROTECTED]: On Mon, Oct 03, 2005 at 01:55:22PM +0700, pirat sriyotha wrote: hi sirs, i am upgrading my other machine from 4.9 to 4.11 and it produced the above message during make installkernel. so what is the solution to this error ? it appears to many places unexpectedly. and when i reboot once again, still 4.9, i get that same error message hightlighted durinh the boot sequences before login: prompt. thanks in advance for any helps and hints to this problem. and please cc to me since i do not subscribe to this mailing list. I'm guessing you really updated your machine to 5.x or later by mistake (e.g. used the wrong cvsupfile), and you have also tried to installworld before installkernel, which is an incorrect way to do the update anyway. thanks to all. you are right kris, i did what you expected. worse was that any command produced core dump in single user mode. the last one was sh exited on signal 12 (cored dump) i simply responded with install 5.4 to that machine anew. i took 25 hours 50 minutes in building world and now begin buildkernel. that is a very old 90MHz machine from bb though. anyway, thanks so much for all of your response and your times. Kris -- with best regards, psr http://www.thai-aec.org/forum This message was sent using Inet-Webmail. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
chflags uid 0 exited on signal 12 (core dump) Bad system call
hi sirs, i am upgrading my other machine from 4.9 to 4.11 and it produced the above message during make installkernel. so what is the solution to this error ? it appears to many places unexpectedly. and when i reboot once again, still 4.9, i get that same error message hightlighted durinh the boot sequences before login: prompt. thanks in advance for any helps and hints to this problem. and please cc to me since i do not subscribe to this mailing list. -- with best regards, psr http://www.thai-aec.org This message was sent using Inet-Webmail. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
sugarcrm: XML Parser not available
hi sirs, am installing sugarcrm from port. installation ends smoothly. but when i launch mozilla http://localhost/suharcrm/, i get error messages instead. looking at /usr/local/www/data, there is no sugarcrm in there but /usr/local/www. so i need to move /usr/local/www/sugarcrm/* to /usr/local/www/data/sugarcrm and re-launch mozilla. i stuck at step 1, system checking error (in red) and the one that i can not recover from is 'XML Parser Not Available.' could any one here please give mo some hints to overcome this kind of errors ? thanks for your time. with best regards, psr ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
