RE: adjkerntz in a jail

Just remove it from the crontab. You don't need it in the jail. Regards, Ruben -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Joshua Groboski Sent: August 04, 2006 3:51 PM To: freebsd-questions@freebsd.org Subject: adjkerntz in a jail Hello, I found

RE: HELP! Filesystem EMPTY after upgrade from 4.11 to 6.1

Hi Sven, How was the disk labeled originally? Is it possible that /usr/home did not reside on a dedicated slice and when you newfs'd /usr you wiped /usr/home ? Regards, Ruben -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Sven Hazejager Sent: June

RE: hi

Have you configured sendmail yet? Take a look in /var/log/maillog and see what it says. Just as a wild guess I'm assuming you're not running a mailserver on the local machine which means you have to tell sendmail where to submit the messages, you can do this in /etc/mail. Good luck, Ruben

RE: hi

2006 12:25:43 +0200 Ruben Bloemgarten [EMAIL PROTECTED] wrote: Have you configured sendmail yet? Take a look in /var/log/maillog and see what it says. Just as a wild guess I'm assuming you're not running a mailserver on the local machine which means you have to tell sendmail where to submit

RE: stupid question - disk mirroring

http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/raid.html -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Wojciech Puchar Sent: March 22, 2006 3:50 PM To: freebsd-questions@freebsd.org Subject: stupid question - disk mirroring what is

panic on 5.4 SMP kernel when jailed apache is used heavily

Hi all, I upgraded a 5.3 system to 5.4 both with SMP kernels, I'm running 6 jails on a dual xeon 1.26 hp rackmount. When apache (both 1.3 and 2.0) is being used heavily the system panics. With a 5.4 GENERIC kernel or a 5.3 SMP kernel this behaviour does not happen and the system is stable.

RE: panic on 5.4 SMP kernel when jailed apache is used heavily

Hi Tamouh, As I said, thanks for the reply, I will try this. I am slightly apprehensive though as this is supposed to address a bug in PAE, not SMP per se. Do you or anyone have any ideas about this ? Regards, Ruben -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL

RE: Can't mount existing data disk after upgrade (disklabel gone)

Joe, If you did not touch ad4 the disklabel it should still have been there, but I presume that you have destroyed it by now. Did you make any kind of backup ? such as a dump of the filesystem ? How did you try to mount ad4s1a ? ( I am assuming you tried to mount the 'partition' and not the

RE: Multiple IP in jail?

If you use nat in conjuction with jails there is no need to add multiple ip's to the jails to be able to reach apache on multiple ip's, although I agree that it would be nice to be able to assign multiple ip's to a jail. Anyone ? Regards, Ruben -Original Message- From: [EMAIL

RE: Setting up a FreeBSD gateway

1. I assume you are running some kind of NAT ? 2. allow udp/tcp traffic out on port 53 to the dns servers you want to use. This will pass the dns requests through the gateway. If you want to use the gateway as a dns forwarder, you need to install something to do this. A third alternative is to

RE: Users unknown in jail, what to do?

follow the steps in jail(8) exactly and that was the problem. I should have done a make distribution DESTDIR=/path/to/jail from /usr/src/etc. Thanks, Gabor Ruben Bloemgarten wrote: Hi Gabor, Did you install the jail following the instructions of the man page ? Which version of FBSD are you

RE: sendmail-submit and envelope-from

-Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Ruben Bloemgarten Sent: December 28, 2005 4:35 PM To: [EMAIL PROTECTED] Subject: sendmail-submit and envelope-from Hi all, I hope someone could help me out with the following : On 5.4 I'm running a few

RE: syslog in jail on 6.0

Hi Dave, Could you send your rc.conf from your mainsystem and jail, syslog.conf from the jail. Also, how did you generate the jail and what is it's purpose ? Regards, Ruben -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Dave Sent: December 30, 2005

RE: Users unknown in jail, what to do?

Hi Gabor, Did you install the jail following the instructions of the man page ? Which version of FBSD are you running ? Assuming that u are running the jail command from root, you don't have to specify the user. Regards, Ruben -Original Message- From: [EMAIL PROTECTED]

RE: ipnat -CF -f /etc/ipnat.rules

Hi Caleb, Add ipfs_enable=YES. Regards, Ruben -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of caleb Sent: December 31, 2005 3:16 AM To: freebsd-questions@freebsd.org Subject: ipnat -CF -f /etc/ipnat.rules Hi everyone, I have just put

sendmail-submit and envelope-from

Hi all, I hope someone could help me out with the following : On 5.4 I'm running a few jails, one of which is running the mail::toaster incarnation of qmail. All is well. From another jail I want to use a php script to generate mailings rewriting the envelope-from: ? mail('[EMAIL

RE: Help

1. make sure you have the ports tree and internet connectivity and forget your cd. Should you not have internet connectivity, make sure you have the package from the ports tree (http://cvsweb.freebsd.org/ports/sysutils/webmin/webmin.tar.gz?tarball=1) and place this in

RE: Connecting to internet.

Chris, http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/config-network-set up.html and http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/configtuning-confi gfiles.html Do try to take a *slightly* closer look next time, preferably before you post a question. Thanks. Regards,

RE: nslookup strangeness

Hi Douglas, If you are using dns relay on your gateway why would you want to use named ? Also, it might be an idea to put the dns server ( i.e. the gateway) in your resolv.conf. Furthermore, neither your hosts ip4 ip (192.168.3.1) nor your non existant ip6 ip (:::) should be able to be resolved,

RE: Running sendmail w/o FQDN

It seems that you are trying to run samba and ssh both from inetd and independantly. Hence the bind:already in use. This is not sendmail related. Do you want to use sendmail as an mua or as an mta ? -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Doug

RE: resolve appends domain section of hostname to non-existent domains

section of hostname to non-existent domains Ruben Bloemgarten [EMAIL PROTECTED] writes: Hi all, Could anyone let me know what's misconfigured here: When I ping from say server2 # ping jkhdsfkhdsafhjsahfdhksa.com I get the following reply : PING

resolve appends domain section of hostname to non-existent domains

Hi all, Could anyone let me know what's misconfigured here: When I ping from say server2 # ping jkhdsfkhdsafhjsahfdhksa.com I get the following reply : PING jkhdsfkhdsafhjsahfdhksa.com.mydomain2.com (ip.of.server.1): 56 data bytes 64 bytes from ip.of.server.1: icmp_seq=0 ttl=64

RE: not rebooting on panic 5.4

priority is to have the machine at least reboot automatically. Regards, Ruben -Original Message- From: Ruben Bloemgarten [mailto:[EMAIL PROTECTED] Sent: December 07, 2005 8:10 PM To: [EMAIL PROTECTED]; freebsd-questions@freebsd.org Subject: RE: not rebooting on panic 5.4 Never mind, swap=ram

not rebooting on panic 5.4

Hi all, I was hoping someone could tell me how to enable 5.4 to reboot automagically on panics. It just hanging there isn't helping. Thanks, Ruben ___ freebsd-questions@freebsd.org mailing list

RE: not rebooting on panic 5.4

Never mind, swap=ram. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Ruben Bloemgarten Sent: December 07, 2005 4:18 PM To: freebsd-questions@freebsd.org Subject: not rebooting on panic 5.4 Hi all, I was hoping someone could tell me how to enable

RE: /dev/mem /dev/kmem jails and using netstat -r and snmp

the other. Regards, Ruben -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Lowell Gilbert Sent: September 10, 2005 2:57 PM To: [EMAIL PROTECTED] Cc: freebsd-questions@freebsd.org Subject: Re: /dev/mem /dev/kmem jails and using netstat -r and snmp Ruben

/dev/mem /dev/kmem jails and using netstat -r and snmp

Hi all, I seem to be a bit stuck here. I seem to need access to /dev/mem and /dev/kmem from inside a jail . Specifically to be able to use netstat –r and snmp in jailed environments. I’m running FBSD 5.4-RELEASE. Could anyone help me shed some light on this problem ? Thanks. Regards,

RE: portsnap and updates using cron

Hi there, To run portsnap and/or freebsd update as a cron job use : #portsnap cron *NOT fetch Regards, Ruben -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of martin hudec Sent: August 31, 2005 6:30 PM To: freebsd-questions@freebsd.org Subject:

RE: See what raid arrays are?

Hi Matt, I quote : What raid hardware? In general, with hardware RAID (PCI cards and the like), the component physical disks of a logical array are hidden from the OS to keep you from accessing them directly and destroying the array, and to simplify the presentation of the array to the OS.

RE: FreeBSD Gateway problems

Hi Tim, Which of the firewalls do you want to use and if you want to use both what do you want the functionality to be? If you can send your rc.conf,ipf.conf and ipnat.conf I could check out the ipf part and see if I find anything. Obviously Glen's experience with ipfw is more extensive than

RE: Mounting on da0s1c or da0s1d?

Hi Joachim, From the bsdlabel man page : # size offsetfstype [fsize bsize bps/cpg] a:8192004.2BSD 1024 819216 b: 1681920 swap c: 11739300unused0 0 # rawpart,don't edit as you can see c is the raw part, leave

RE: How to recover data? - Formatted, Fdisk'd, and disklabeled ad1, now ad0 with FreeBSD is messed up

? - Formatted, Fdisk'd, and disklabeled ad1, now ad0 with FreeBSD is messed up Ruben Bloemgarten wrote: Best guess is that your booting from ad1 not ad0, check your bios. Unbelievable. I guess when I used the PowerMax utility or something, the boot order got switched around. I haven't been

RE: How to recover data? - Formatted, Fdisk'd, and disklabeled ad1, now ad0 with FreeBSD is messed up

Hi Mark, On disk ad1 you have one slice ad1s1 which has one partition ad1s1d, mount this # mount /dev/ad1s1d /mnt Now check the size of the partition : #df -h If the size of this partition is equal to the size of your drive you just used the entire drive for that one partition. If it's not

RE: Migrating FreeBsd installation to another hard drive

Hi there, I had to do something similar i.e. change RAID levels, there is no need to install anything. Just use the fixit CD. Here is my procedure : Ofcourse you'll have to change disk[slice] names to what suits you. NOTE: I used tar for the /usr slice as I had some size constraints and

RE: stat running as www weirdness - genarting INCOMING traffic

-Original Message- From: Chuck Swiger [mailto:[EMAIL PROTECTED] Sent: June 23, 2005 7:26 PM To: [EMAIL PROTECTED] Cc: FreeBSD-questions@FreeBSD.org Subject: Re: stat running as www weirdness - genarting INCOMING traffic Ruben Bloemgarten wrote: I’m seeing weirdness of stat opening up port

stat running as www weirdness - genarting INCOMING traffic

Hi all, I’m seeing weirdness of stat opening up port 4000+ and generating/receiving enormous amounts of incoming traffic i.e. 400Gb over a 24hour time period.Does this sound familiar to anyone ? Thanks for any brain usage not my own. Regards, Ruben “Life is like a box of

RE: Managing updates in jails

Hi Mark, What I find a lot easier is to use freebsd-update for the base system updates and, after having mount_nullfs'd /usr/ports from the host system onto the jailed systems, portsnap and portupgrade. - host system : freebsd-update/portsnap/portupgrade Jailed system :

php/apache/ssl core dumps

Hi all, Im trying to get Apache to work with both ssl and php. However, when ssl apache and php are installed and the php module is set to be loaded into apache, apache core dumps (11). Im using the latest ports tree. Also Ive tried any number of combinations of mod_php, php-extensions,

calculating/timing dump/restore

Hi all, I would like to time a dump/restore operation without actually sitting next to my box with a stopwatch. Specifically restore as dump already indicates the time it took. Can anybody help me out here? Thanks, Ruben ___ [EMAIL

FW: help please? corrupted hard disc - invalid super block.

It looks like you wrote the disklabel for the slice to the disk or vice-versa. If you check /dev there probably isn't a /dev/ad5s* there. Try mounting /dev/ad5e instead of /dev/ad5s1e. To verify, do a bsdlabel ad5s1 to see if you have a disklabel for the slice. Otherwise you could : 1.backup

md5 of a filesystem / verifying filesystem integrity after dump/restore operation

Hi all, Does someone know how to reliably run a checksum of sorts on a filesystem, to be able to verify filesystem integrity after a restore from dump level 0 has occurred? Thanks, Ruben ___ [EMAIL PROTECTED] mailing list

RE: kdm and startkde

Show us your ~/.xinit ! for kdm/xdm/gdm, - check your hostname. Try to run xdm, gdm and kdm manually and let us know if there is any difference between them. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Brett Wiggins Sent: Thursday, June 17, 2004 8:50

identifying single drives on hardware RAID0

Hi all, Probably a dumb question here : but I want to identify a specific drive in RAID0 config, but only the logical drive is reported dmesg. Is this even possible ? Thanks in advance, Ruben ___ [EMAIL PROTECTED] mailing list

RE: more kdm questions

Forgot to cc the list -Original Message- From: Ruben Bloemgarten [mailto:[EMAIL PROTECTED] Sent: Friday, June 18, 2004 8:13 PM To: 'Brett Wiggins' Subject: RE: more kdm questions # vi /etc/rc.conf Add hostname=yourhostname to the file Reboot will make the change permanent

RE: more kdm questions

You don't need do this to get kdm working. Only if you want it to start at boot. I suggest you do this when you get kdm working properly, not before. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED] Sent: Friday, June 18, 2004 8:01 PM To: