Em Sex, 2008-08-29 às 10:57 -0400, Bill Moran escreveu:
In response to FreeBSD Questions [EMAIL PROTECTED]:
FreeBSD has supported 64-bit architectures for a while now... Alpha
and UltraSPARC come to mind--even if Alpha is no longer a Tier 1
architecture. I'm surprised to hear so many
it is the usb chip that does not work ok...
or works only with windows timings
Please use an usb storage brand: Kingston...
for externals usb drivers, I recomend seagate...
format them with a UFS2 file system
using sysinstall, place a Freebsd partition on it
and format it
this way
I use DLINK TX502 with the VIA chipset
FreeBSD vr0works very good
for years (2 years) now without any complain
is easy to get (buy) very cheap about US10
each
___
freebsd-questions@freebsd.org mailing list
Em Sex, 2008-07-11 às 16:03 +0200, Julien Cigar escreveu:
Debian (not Ubuntu ..)
On Fri, 2008-07-11 at 07:29 -0400, Ian Lord wrote:
Hi,
I am not trying to start a war linux vs freebsd or a long thread on which
distribution is best. Just trying to get a quick answer here.
Em Sex, 2008-06-20 às 14:55 +0200, Wojciech Puchar escreveu:
Is anyone using FreeBSD for their VOIP PBX needs? If so, what software
I work on a copany that does this
PABX (large ones) only using FreeBSD - http://www.levier.com.br
FreeBSD 7.0 asterisk 1.4 openvox hardware
it is
Em Sex, 2008-06-20 às 19:19 +0200, Wojciech Puchar escreveu:
How much cpu
we use always AMD 64 X2 with 2Gb of memory for
up to 3 PCI boards of 4 E1 each, that is: 12 E1.
what codec do you use? if no recoding (alaw) i think it uses very
little CPU in order of few% of single or less.
when i connected 56 cisco phones to my laptop (used 4*16 port switches
;), and having all of them working (called from first to second, from third
to
fourth etc..) there was below 4% CPU load but it's 1200Mhz Pentium-3M.
Yes... the cisco uses SIP, that is far more efficient...
the
Em Sex, 2008-06-20 às 21:45 +0200, Wojciech Puchar escreveu:
when i connected 56 cisco phones to my laptop (used 4*16 port switches
;), and having all of them working (called from first to second, from
third to
fourth etc..) there was below 4% CPU load but it's 1200Mhz Pentium-3M.
Helllo
I understand your problem (I was once a SCO user/programmer)
well
the easy way is: a disk of 20GB miminum...
1) Install FreeBSD 7.0 RELEASE (choose your favorite lay out...) that
is /root, /var,swap, /usr
in diferent slices swap is about 2Gb... (later will hold
the
Well...
Here I am in a project of notebooks for schools
machines with 13 120gb of disk turion 64...
All of them running FreeBSD 7.0 it is about 7000 notebooks
in the first year...
With a total of 35000 notebooks in 3 years... and counting...
may be a total of 100,000 notebooks in 5 years...
Em Dom, 2008-06-08 às 14:37 +0100, Chris Whitehouse escreveu:
Jerry McAllister wrote:
The idea behind the FreebSD nobebook project is rather simple:
Here in my country a person must (or should) pay a lot of taxes to
the govern... for every notebook sold,
Em Ter, 2008-05-13 às 22:25 -0600, Chad Perrin escreveu:
I'm looking for an easier way to insert interrobangs and other non-ASCII
characters (em-dashes, et cetera) into text on my FreeBSD laptop than by
way of copy/paste. Any recommendations? A hunt-and-select clicky GUI
probably wouldn't
Hello...
I had another NIC from marvell (I did not remember if it was a nve or nfe)
that refuses to work until I put the word UP in the ifconfig command
in /etc/rc.conf.
ifconfig_xx0=up DHCP
==
may be is it not the case
what the command
I use an ACER notebook 5050 with 2 partitions (one i386, and other
amd64)
the amd64 is faster, the software is very stable, and everything
works...
I do not use the sleep mode, the freebsd kernel keeps the processor
halted when not
in use, so the battery lasts longer, and the boot (total boot is
Em Dom, 2008-04-13 às 04:14 +0300, Giorgos Keramidas escreveu:
On Sat, 12 Apr 2008 17:20:17 +0200, Michaël Le Barbier [EMAIL PROTECTED]
wrote:
Hi folks,
a few years ago, I tried to use FreeBSD's make under GNU/Linux, and
thanks to `jpd' on c.u.b.f.misc, I managed to build FreeBSD
In my computer running FreeBSD 7.0 64bits with gnome 2.22 the
linksys site works ok... indeed I can see more than 90% of the flash
(that is still 7) using nspluginwrapper.
and for those that not work, the wine+firefox solution is used...
it all works including youtube, bbc, fox, aol, uol...
and
Hello all,
can someone please confirm if this is true
http://lkml.org/lkml/2008/3/31/367
Thanks
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL
Hello all
This week I have time to trace the problem with evolution that
lasts too much time to start.
The problem is that glib on function g_module_load, searchs for a symbol
g_module_check_init, g_module_unload... by default.
It occurs that the evolution code, that will be loaded, does not
Em Qua, 2008-02-13 às 22:51 -0500, E. J. Cerejo escreveu:
I never had this problem before with evolution, but since upgrading to
FBSD 6.3 from 6.2, evolution just takes about a minute to start and
consumes 98% of my CPU. I recently rebuild it from source but still too
slow, no
Em Sex, 2008-01-18 às 14:27 +0200, Giotis Eugen escreveu:
I have a dedicated server which is based on freebsd and i forgot to install
ftp at the installation.
I have no access for ftp but i have the root level accounts.
For control panel i have cpanel/whm.
Can i install the ftp now ?
How ?
Well...
after all the endless reading... and with the weekend ahead... May I
conclude that:
1) Flash 9 works as long as I relocate the libs in /compat
2) I must use version 6 of the linux libraries
3) Must use the linux firefox
Am I missing something???
Will try to put all the libraries in
Em Sex, 2007-12-28 às 12:17 +0100, [EMAIL PROTECTED] escreveu:
Hello All,
is anyone using ekiga? ekiga runs and connects to [EMAIL PROTECTED] ( test
number ).
but when i hang up, or change volume using the ekiga-controls, the UI freezes.
#FreeBSD host 7.0-BETA2 FreeBSD 7.0-BETA2 #4
Hello,
I read your email about gdm and xdmcp
My setup for 2.20 does not work at all
so I installed the old 2.18.3 from the ports,
(I build the package from the ports) and it works
just ok as before...
I think there is a bug in the 2.20/2.21 xdmcp code... I
had no time to fix ...
Lenzi
The problem is in the rescue directory of the CD/DVD
the directory have hard links that when copied with tar,
transforms in full files without the links
I think the problem is in libarchive.. as the old 5.4 FreeBSD
does copy the rescue as expected
a small script fix the rescue links is:
Hello
I had the same problem a week ago...
sometimes the OO opens, but when I try to choose any menu
option it quits...
Installing only xorg 7.2 and openoffice it works...
when I removed the glib or gtk it works...
I have some problems with the glitz library too...
I am using FreeBSD 6.2
from the smp man page.
1) make sure you have options SMP in your kernel and is built and
compiled OK.
2)put the lines in the /boot/loader.conf
and reboot the system
machdep.cpu_idle_hlt=0
machdep.hlt_cpus=0
machdep.hlt_logical_cpus=0
50 m isn't that much. I was guessing more in the range of
one to five km. (Maybe with an outside antenna??)
the idea is a child to communicate with another than with another... in
a school during normal
hour, ther will be about 500 computers XO on and online... so the all
Comments pleaase
I heard/read that these will be networked by transceiver going
peer-to-peer. With a range of a few miles. The school or
university would serve at the link with the Internet. Yes?
If other, please explain.
Yes they are networked using
Here in my country is happening
the FISL http://fisl.softwarelivre.org/8.0/www/?q=en
they finally show the $100 dollar laptop for children..
the machine have 512mb of memory, more 512mb of flash rom,
resolution of about 1000x900 keyboard and mouse .
they have been in testing for some months
For me it works great
That was the program I was waiting for to generate or
alter subtitles...
Great Job,
Thanks
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send
I notice too the hard link problem..
For me the problem happens when I try to read the
CD or DVD into the hard disk
In the CD the hard links exists, but when I copy into the hard disk,
the hard links vanishes...
I think that the problem relies in the iso9660 logic.. because the same
CD works
try edit/add the folowing in /etc/libmap.conf
libintl.so.6libintl.so
Hope will help
Sergio
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL
Em Ter, 2007-03-13 às 09:47 -0500, Robert Huff escreveu:
Thomas David Rivers writes:
I've been trying to run 4.x binaries on FreeBSD 6.2; with
the compat4x package (and/or port) installed.
However, the 4.x binaries want to find libc.so.3, which
doesn't seem to be anywhere
As I said some emails ago
I have a 200 machines all freebsd network that runs 24/7 with a mtbf
of 15 years...
how I got the numbers?
well I have an issue every 3 or 4 weeks... (the machine hangs,
stops, the power supply explodes) the machines are aways on...
if you count 200
As I said some emails ago
I have a 200 machines all freebsd network that runs 24/7 with a mtbf
of 15 years...
how I got the numbers?
well I have an issue every 3 or 4 weeks... (the machine hangs,
stops, the power supply explodes) the machines are aways on...
if you count 200
Hello...
I see you issues about telenet...
I use the inetd+telnet for more than 20 years and using BSD
with RSA, and obviiously with a good password.
I have never been cracked down...
and I have 10 of my /etc/ttys entries setted to secure
ttyp0 nonenetwork off secure
So. resuming:
1) change some lines in /etc/ttys to:
ttyp0 nonenetwork off secure
ttyp1 nonenetwork off secure
ttyp2 nonenetwork off secure
ttyp3 nonenetwork off secure
ttyp4 none
What do you gain by allowing telnet access to your hosts that you don't
get with ssh?
Paul Schmehl ([EMAIL PROTECTED])
Senior Information Security Analyst
The University of Texas at Dallas
http://www.utdallas.edu/ir/security/
--=7CEE76846768256DC8==--
Maybe you are, but even so, do you still use V7 on a PDP/11 or 32V on a VAX,
make dumps to DECtape, or use a VT100? There's something to be said for
modern PC hardware, xterms/gnome-terminal/konsole/screen, and yes, ssh.
(Namely speed, convenience, and security, respectively).
I went
Em Seg, 2007-03-05 às 08:33 -0500, Huy Ton That escreveu:
I renamed this file and now I cannot boot up anymore... How can I restore
this file? Help
The easy way:
1) Boot from the FreeBSD 1 boot cd (that one with 680Mb...)
2) choose repair
3) fsck the /dev/adXs1a (X is 0,1 depending of
Hello all
I setted up several bsd servers that are terminal servers running
gnome 2.16.3.. the machines runs about 10 to 40 thin clients running
FreeBSD.
Question: Does the thin clients count as Freebsd servers in bsdstats???
if so. It will add about 400 servers in the list
Em S?, 2007-03-03 às 09:27 +0100, [LoN]Kamikaze escreveu:
Sergio Lenzi wrote:
Question: Does the thin clients count as Freebsd servers in bsdstats???
If each client runs the bsdstats script and has its own hostname, yes.
Yes. that is the case... the thin clients have hostnames like
hello.. I have a problem with
gnome-art on gnome 2.16.3 in my computers
it does not runs, gives exec error.
FreeBSD 6.1, Ruby-1.8.5, Ruby-gnome2 0.16.0
an installed ruby-libglade, and test programs runs ok...
error message:
/usr/local/lib/ruby/site_ruby/1.8/libglade2.rb:105:in
Hello alll
Even FreeBSD, or even any BSD (ok, OSX is BSD...) is mention in
the BBC survey, I notice that:
1) They claim that 90% of the persons use windows, but in the
publish list, is just the contrary... only 2 ones use windows,
and like it, and one of them just for games
2) The
Em S?, 2007-01-20 às 10:03 -0500, Bob escreveu:
Hi:
I Live with a very hairy, large, Main Coon cat called Tania; she sheds
tons of fine hair all over the place. She is a Mouser, and proudly rids
our home (a boat) of all sorts of mice. Unfortunately she also kills
Computer mice! Therein
What would happen if one used the linux-alsa-libs from ports? Would
that help with sound?
Does not work also... the library does not recognize the sound
hardware
besides it crashes some minutes after starting... May be a problem
with
the thread library... must be reworked.
Well
I would love to see that work, but sync'ing the audio and video may be
problematical.
FWIW ...
John
I tested the lastest version 0.7.2 it is better than the previous but
is missing the ability to play movies about the sync of audio and
video
once the file is in the
I was just wondering...
I tested the player of the gnash project...
seems that a good aproach would get the flv file and
pass it directly to the mplayer using the window-id
The mplayer than sure decodes the flv file with good
image and sound
I will spend some time this week on
Hello Jonathan...
I configure the wireless in the /etc/dhclient.conf
interface ndis0 {
send host-name lMy computer;
prepend domain-name cwb.casa ;
media media autoselect authmode open wepkey -,
ssid bsdnet,
ssid vex,
Hello... has anyone been able to make an HP1020 printer
work in FreeBSD 6.1-RELEASE
it finds the printer, attaches it, but when I try to boot the rom code
(shihp1020.img)
it blocks ... for the trace below you can see that it does not open the
printer,
usb status is 0x00 and error is 15
Sergio, sorry, but you missed the [HEADS UP], and did it all wrong.
It is not because of the chip cannot do DMA larger than 4k. It is
because your hardware combination.
Agree... in that notebook there is a problem with DMA. the
nautilus-cd-burner complains about it...
Smaller
Hello all
after trying to set up the sound on the 6.1 RELEASE on a acer aspire
3100
notebook, I realise that the driver for the sound chip was the HDA
(high definition audio)
That notebook use a realtek version of the sound ship.
The code I get in the internet does not compile in the
Em Dom, 2006-08-20 às 11:19 -0700, Matt Olander escreveu:
Hi all,
I met with a developer of the Real Player at Linux World. She says they
would *love* to port a native version of the Real player to FreeBSD.
Yay! She even showed me that they have an older FreeBSD dev environment
set up
Em Ter, 2006-08-08 às 00:18 +0200, Nagy László Zsolt escreveu:
Hello
Here I have several units running FreeBSD 6.1 with diskless
using a big server and several clients (20-30) thin clients...
it is very fast.. (the openoffice starts in 5 seconds...)...
I recomend:
1) server AMD64 socket
Em Ter, 2006-08-08 às 21:20 +0200, Nagy László Zsolt escreveu:
Hello Sergio,
You are the guy that I was waiting for. :-) Now I know for sure that it
will work.
I am glad I could help you
have you seen the desktop image
I only have one question. How do you setup the sound
Em Ter, 2006-07-18 às 14:14 +, Christopher Hobbs escreveu:
Greetings all!
I was thumbing through the archives and noticed that someone posted a link to
the following site:
http://www.unixlike.com.br/?p=%2081
They mentioned they couldn't read the language it was written in, so I
Hello,
Is SMP enabled in the GENERIC kernel? I have a hyperthreading box, and
on
Linux it shows up with two cpus. When I do a top on the box in FreeBSD I
still
see only one CPU. Also, sysctl -a | grep cpu only shows a dev.cpu.0.
You must set :
machdep.hyperthreading_allowed=1
in
While trying to introduce FreeBSD into a Micro$oft only house, I've heard the
following many times:
Never heard of FreeBSD and Show me some documentation and stats.
Regardless of the actual version, the stats are accurate for those providers.
They reflect overall uptime and
Hello...
I was thinking well it was 2 months ago...
FreeBSD I think is one of the most amazing opearting system
ever coded... Stable, fast... etc... etc...
The interfaces (Xwindow, with Kde, Gnome) have reached a very
good level of usage, stable..
There are several problems still???
Em Dom, 2006-06-11 às 12:55 -0400, Kris Kennaway escreveu:
On Sun, Jun 11, 2006 at 11:21:43AM +0100, Soo-Hyun Choi wrote:
Hi,
I accidently deleted /lib/libm.so.4 and /lib/libc.so.6 on my FreeBSD
6.1 RELEASE systsem. After this, even 'ls' command is not working.
Is there any
Hello...
I have here running on an HP pavilion zv6000 with all enabled...
gnome2.14 + flash7 + wireless + kernel 6.1 + java. + multimedia(all
types and plugins: rmv, avi, asf)
+ dvdRW..., openoffice 2.0.2 java 1.4, 1.5, eclipse, jdk,
monodevelop
the broadcom wireless built from the ndis
If you looking for a first time BSD desktop (KDE) then try PC-BSD. and
If you can't get that to run (PC-BSD is based on FreeBSD) give SuSE
10.1 a go.
Good option I tried... fast easy... the version is still 5.X ... but is
good...
it is KDE based
On the HP series, due to a
Hello
I am a FreeBSD user for a long time, but now
I have a question about the ISO cdrom
In FreeBSD 6.0-release, disk1 iso image
it shows mounted in my FreeBSD release
the folowing information from mount...
Filesystem 1K-blocks Used Avail Capacity Mounted on
/dev/acd0 588840
Em Seg, 2006-02-13 às 14:32 -0500, Lowell Gilbert escreveu:
sergio lenzi [EMAIL PROTECTED] writes:
I need to make a new cd1 with xorg version 6.9.0
and some packages for my own use... but I was
unable to rebuild the cd... with an 600Mb size...
My question is:
Where can I find
64 matches
Mail list logo
