Hi all,
I am still fairly new to FreeBSD but here is the situation
I have a sparc Netra T1 AC 200, running FBSD 6-stable. It had dual 18GB
disks in a gmirror raid 1, As can be imagined, ran out of space quickly.
I purchased 2x73GB scsi drives. I removed 1 of the 18GBs, placed 73GB
in, rebuilt the mirror, removed the other 18GB, inserted 73GB, rebuilt
mirror. Ok, so I have 2 73GB drives in there in a mirror
(/dev/mirror/gm0) they are partitioned as such:
Otter# df -h
Filesystem Size Used Avail Capacity Mounted on
/dev/mirror/gm0a 501M 70M 392M 15% /
devfs 1.0K 1.0K 0B 100% /dev
/dev/mirror/gm0e 501M 356K 461M 0% /tmp
/dev/mirror/gm0f 11G 9.8G 771M 93% /usr
/dev/mirror/gm0d 1.9G 165M 1.6G 9% /var
I want to grow the /usr partition to fill the rest of the 73gb.
What do I need to do. sunlabel always complains about geom not found
whenever I try to do anything so I assume I need to break the mirror and
change things then rebuild the mirror? Not sure how to do this and even
when I do get it to work I'm not sure what I need to do with sunlabel.
Thanks!!!!
-=Tom Donnelly
Please CC me as I am not on the list.
Relevant info:
Sunlabel shows:
# /dev//mirror/gm0:
text: FreeBSD17G cyl 2200 alt 2 hd 255 sec 63
bytes/sector: 512
sectors/cylinder: 16065
sectors/unit: 35343000
8 partitions:
#
# Size is in sectors.
# Offset is in cylinders.
# size offset
# ---------- ----------
a: 1060290 0
b: 4144770 66
c: 35343000 0
d: 4176900 324
e: 1060290 584
f: 24900750 650
dmesg:
Copyright (c) 1992-2008 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.4-PRERELEASE #1: Thu Oct 2 11:40:35 CDT 2008
[EMAIL PROTECTED]:/usr/obj/usr/src/sys/GENERIC
Timecounter "tick" frequency 500000000 Hz quality 1000
real memory = 1073741824 (1024 MB)
avail memory = 1031413760 (983 MB)
cpu0: Sun Microsystems UltraSparc-IIe Processor (500.00 MHz CPU)
kbd0 at kbdmux0
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413,
RF5413, REGOPS_FUNC)
nexus0: <Open Firmware Nexus device>
pcib0: <U2P UPA-PCI bridge> on nexus0
pcib0: Sabre, impl 0, version 0, IGN 0x7c0, bus A, 66MHz
pcib0: [FAST]
pcib0: [FAST]
pcib0: [GIANT-LOCKED]
pcib0: [GIANT-LOCKED]
pcib0: DVMA map: 0xc0000000 to 0xc3ffffff
pci0: <OFW PCI bus> on pcib0
pcib1: <APB PCI-PCI bridge> at device 1.1 on pci0
pci1: <OFW PCI bus> on pcib1
ebus0: <PCI-EBus3 bridge> mem
0xf0000000-0xf0ffffff,0xf1000000-0xf17fffff at device 12.0 on pci1
ebus0: <idprom>: incomplete
ebus0: <flashprom> addr 0x1000000000-0x10000fffff (no driver attached)
eeprom0: <EEPROM/clock> addr 0x1400000000-0x1400001fff on ebus0
eeprom0: model mk48t59
ebus0: <SUNW,lomh> addr 0x1400200000-0x1400200003 irq 42 (no driver
attached)
pci1: <old, non-VGA display device> at device 3.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci1
isa0: <ISA bus> on isab0
gem0: <Sun ERI 10/100 Ethernet> mem 0xe0400000-0xe041ffff at device 12.1
on pci1
miibus0: <MII bus> on gem0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
gem0: 2kB RX FIFO, 2kB TX FIFO
gem0: Ethernet address: 08:00:20:fd:f7:9c
ohci0: <Sun PCIO-2 USB controller> mem 0xe2000000-0xe2007fff at device
12.3 on pci1
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: <Sun PCIO-2 USB controller> on ohci0
usb0: USB revision 1.0
uhub0: (0x108e) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
atapci0: <AcerLabs M5229 UDMA66 controller> port
0x400-0x407,0x418-0x41b,0x410-0x417,0x408-0x40b,0x420-0x42f at device
13.0 on pci1
atapci0: using PIO transfers above 137GB as workaround for 48bit DMA
access bug, expect reduced performance
ata2: <ATA channel 0> on atapci0
ata3: <ATA channel 1> on atapci0
gem1: <Sun ERI 10/100 Ethernet> mem 0xe0440000-0xe045ffff at device 5.1
on pci1
miibus1: <MII bus> on gem1
ukphy1: <Generic IEEE 802.3u media interface> on miibus1
ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
gem1: 2kB RX FIFO, 2kB TX FIFO
gem1: Ethernet address: 08:00:20:fd:f7:9c
ohci1: <Sun PCIO-2 USB controller> mem 0xe5000000-0xe5007fff at device
5.3 on pci1
ohci1: [GIANT-LOCKED]
usb1: OHCI version 1.0, legacy support
usb1: <Sun PCIO-2 USB controller> on ohci1
usb1: USB revision 1.0
uhub1: (0x108e) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 4 ports with 4 removable, self powered
pcib2: <APB PCI-PCI bridge> at device 1.0 on pci0
pci2: <OFW PCI bus> on pcib2
sym0: <896> port 0xc00000-0xc000ff mem 0x2000-0x23ff,0x4000-0x5fff at
device 8.0 on pci2
sym0: No NVRAM, ID 7, Fast-40, LVD, parity checking
sym0: [GIANT-LOCKED]
sym1: <896> port 0xc00100-0xc001ff mem 0x6000-0x63ff,0x8000-0x9fff at
device 8.1 on pci2
sym1: No NVRAM, ID 7, Fast-40, LVD, parity checking
sym1: [GIANT-LOCKED]
nexus0: <syscons>, type (unknown) (no driver attached)
uart0: <16550 or compatible> at port 0x3f8-0x3ff irq 43 on isa0
uart0: console (9600,n,8,1)
uart1: <16550 or compatible> at port 0x2e8-0x2ef irq 43 on isa0
Timecounters tick every 1.000 msec
Waiting 5 seconds for SCSI devices to settle
(probe0:sym0:0:0:4): AutoSense Failed
(probe0:sym0:0:0:5): AutoSense Failed
(probe0:sym0:0:0:6): AutoSense Failed
(probe0:sym0:0:0:7): AutoSense Failed
da0 at sym0 bus 0 target 0 lun 0
da0: <SEAGATE SX373405LC C206> Fixed Direct Access SCSI-3 device
da0: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged Queueing
Enabled
da0: 70007MB (143374738 512 byte sectors: 255H 63S/T 8924C)
da1 at sym0 bus 0 target 1 lun 0
da1: <SEAGATE SX373405LC C203> Fixed Direct Access SCSI-3 device
da1: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged Queueing
Enabled
da1: 70007MB (143374738 512 byte sectors: 255H 63S/T 8924C)
GEOM_MIRROR: Device gm0 created (id=915151075).
GEOM_MIRROR: Device gm0: provider da0 detected.
GEOM_MIRROR: Device gm0: provider da1 detected.
GEOM_MIRROR: Device gm0: provider da1 activated.
GEOM_MIRROR: Device gm0: provider da0 activated.
GEOM_MIRROR: Device gm0: provider mirror/gm0 launched.
Trying to mount root from ufs:/dev/mirror/gm0a
_______________________________________________
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"