I have a CF reader and I have problems on access on it. I've used
from MacOS X but the machine are not currently on my hands (it's property
of my last employer) and I suppose that FreeBSD is capable of doing
thing on it.
The reader is a Transcend, below is what dmesg says about it.
I'm using 4.9-RELEASE (I haven't easy access to the net and I have not
phone line at home 8-(( ).
I have
device atapicam
on my custom kernel.
The device appears on dmesg:
zolocho# dmesg | grep umass
umass0: ScanLogic SSFDC-CF 0.74! ScanLogic SSFDC-CF 0.74!, rev 1.10/0.74, addr 3
I've searched on man pages. So, camcontrol says:
zolocho# camcontrol devlist -v
scbus0 on ata0 bus 0:
< > at scbus0 target -1 lun -1 ()
scbus1 on ata1 bus 0:
<IDE DVD-ROM 16X 2.0> at scbus1 target 0 lun 0 (pass0,cd0)
<PLEXTOR CD-R PX-W4824A 1.04> at scbus1 target 1 lun 0 (pass1,cd1)
< > at scbus1 target -1 lun -1 ()
scbus2 on umass-sim0 bus 0:
<ScanLogi c SSFDC-CF 0.74! > at scbus2 target 0 lun 0 (probe0)
< > at scbus2 target -1 lun -1 ()
scbus-1 on xpt0 bus 0:
< > at scbus-1 target -1 lun -1 (xpt0)
As I can read on man umass(4) I've scanned with umass my multislot card
reader (is cf and sc capable)
zolocho# camcontrol rescan 0:0:0
Re-scan of 0:0:0 was successful
zolocho# camcontrol rescan 0:0:1
Re-scan of 0:0:1 was successful
zolocho# camcontrol rescan 0:0:2
Re-scan of 0:0:2 was successful
zolocho# camcontrol rescan 0:0:3
Re-scan of 0:0:3 was successful
Well, It seems that I can access to the decive.
So, I'll try to fsck it:
fsck da0
Ops!. Reboot
I've tryed with:
disklabel -w -r da0 cf
Ops! Reboot
I've found another one anyonning thing:
zolocho# sh ./MAKEDEV da0
zolocho# cd -
zolocho# camcontrol start da0
camcontrol: cam_lookup_pass: CAMGETPASSTHRU ioctl failed
cam_lookup_pass: No such file or directory
cam_lookup_pass: either the pass driver isn't in your kernel
cam_lookup_pass: or da0 doesn't exist
Definitively I have da0 created and I do have pass driver on
my kernel.
I don't know very good this kind of devices but I have seen that
in Linux is veeery easy.
*Without* atapicam on the kernel was possible doing
camcontrol start da0
but anything related to fsck'ing the
device, newfs the device or anything, give me another one
system's freeze.
I have checked on FreeSBIE (as you know a FreeBSD 5.X-based LiveCD) but
the result was not better.
I've seen the work done on Linux but I won't install a Linux just to
create a cf'ed *FreeBSD* image. ;-)
Can you point me, please?.
Thanks in advance.
Best regards
P.S.: Please, cc me any answer, because I'm not subscriber of
the list. My web-based mail is not capable of assume the volume
of mail of a high-traffic list as this list is.
-- -- -- ======================================= DISCLAIMER: This message is the author's personal opinion and does not constitute the support, opinion or policy of carvay at tikismikis.org, or of the little green men that have been following him all day. ======================================= _______________________________________________ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
