Hello,
My graphics card's 3D acceleration is supported by Xorg's radeon module but,
for some reason, it doesn't work. Before posting, I did some research on the
Internet and it seems that I'm not the only one having this problem.
It doesn't load agp.ko... and I have it on my loader.conf  it's weird...

OS: FreeBSD 6.1-RELEASE-p3
Graphics card: ATI Radeon RS200 Mobility IGP 340M (up to 128MB of shared
memory)

If you need more info, please let me know.

It works OK on Fedora Core 5 and Windows XP. But I prefer FreeBSD ;)

See below for more details.
Thanks



%dmesg
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
       The Regents of the University of California. All rights reserved.
FreeBSD 6.1-RELEASE-p3 #0: Fri Jul 14 19:33:56 CEST 2006
   [EMAIL PROTECTED]:/usr/obj/usr/src/sys/VAIO
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Mobile Intel(R) Celeron(R) CPU 2.00GHz (1991.73-MHz 686-class CPU)
 Origin = "GenuineIntel"  Id = 0xf27  Stepping = 7

Features=0xbfebf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
 Features2=0x4400<CNTX-ID,<b14>>
real memory  = 402063360 (383 MB)
avail memory = 383979520 (366 MB)
kbd1 at kbdmux0
ath_hal: 0.9.16.16 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <SONY K7> on motherboard
acpi0: Power Button (fixed)
acpi_ec0: <Embedded Controller: GPE 0x18> port 0x62,0x66 on acpi0
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci_link5: BIOS IRQ 11 for 0.12.INTC is invalid
pci_link5: BIOS IRQ 11 for 0.10.INTC is invalid
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
drm0: <ATI Radeon RS200 Mobility IGP 340M> port 0xa000-0xa0ff mem
0xe0000000-0xefffffff,0xc0500000-0xc050ffff irq 11 at device 5.0 on pci1
info: [drm] Initialized radeon 1.19.0 20050911
pci0: <simple comms, generic modem> at device 3.0 (no driver attached)
pcm0: <Acer Labs M5451> port 0x8800-0x88ff mem 0xc0401000-0xc0401fff irq 11
at device 4.0 on pci0
pcm0: <Analog Devices AD1981B AC97 Codec>
pcm0: [GIANT-LOCKED]
pci0: <bridge> at device 6.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
cbb0: <RF5C476 PCI-CardBus Bridge> mem 0xc0402000-0xc0402fff irq 11 at
device 10.0 on pci0
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb1: <RF5C476 PCI-CardBus Bridge> mem 0xc0403000-0xc0403fff irq 10 at
device 10.1 on pci0
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
fwohci0: <Ricoh R5C552> mem 0xc0404000-0xc04047ff irq 9 at device 10.2 on
pci0
fwohci0: OHCI version 1.0 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 08:00:46:03:01:66:6c:85
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 0a:00:46:66:6c:85
fwe0: Ethernet address: 0a:00:46:66:6c:85
fwe0: if_start running deferred for Giant
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
uhci0: <VIA 83C572 USB controller> port 0x8080-0x809f irq 11 at device
12.0on pci0
uhci0: [GIANT-LOCKED]
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0x80a0-0x80bf irq 10 at device
12.1on pci0
uhci1: [GIANT-LOCKED]
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ehci0: <VIA VT6202 USB 2.0 controller> mem 0xc0404800-0xc04048ff irq 9 at
device 12.2 on pci0
ehci0: [GIANT-LOCKED]
usb2: EHCI version 0.95
usb2: companion controllers, 2 ports each: usb0 usb1
usb2: <VIA VT6202 USB 2.0 controller> on ehci0
usb2: USB revision 2.0
uhub2: VIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 4 ports with 4 removable, self powered
atapci0: <AcerLabs M5229 UDMA100 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x80c0-0x80cf at device 15.0 on pci0
atapci0: using PIO transfers above 137GB as workaround for 48bit DMA access
bug, expect reduced performance
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
rl0: <RealTek 8139 10/100BaseTX> port 0x9c00-0x9cff mem
0xc0404c00-0xc0404dff irq 11 at device 18.0 on pci0
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: xx:xx:xx:xx:xx:xx
battery0: <ACPI Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model GlidePoint, device ID 0
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77f irq 7 drq 3
on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem
0xc0000-0xcefff,0xdc000-0xdffff,0xe0000-0xe3fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550?
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ums0: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM), rev 1.10/3.00,
addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
Timecounter "TSC" frequency 1991734928 Hz quality 800
Timecounters tick every 1.000 msec
ath0: <Atheros 5212> mem 0x88000000-0x8800ffff irq 11 at device 0.0 on
cardbus0
ath0: Ethernet address: xx:xx:xx:xx:xx:xx
ath0: mac 5.9 phy 4.3 radio 4.6
ad0: 38154MB <HITACHI DK23EA-40 00K3A0A3> at ata0-master UDMA100
acd0: CDRW <QSI CD-RW/DVD-ROM SBW-241/VS03> at ata1-master UDMA33
Trying to mount root from ufs:/dev/ad0s1a
ath0: link state changed to UP
error: [drm:pid816:radeon_cp_init] *ERROR* radeon_cp_init called without
lock held
error: [drm:pid816:drm_unlock] *ERROR* Process 816 using kernel context 0
ums0: at uhub0 port 1 (addr 2) disconnected
ums0: detached
ums0: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM), rev 1.10/3.00,
addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
pid 1087 (amule), uid 1001: exited on signal 6 (core dumped)
ums0: at uhub0 port 1 (addr 2) disconnected
ums0: detached
ums0: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM), rev 1.10/3.00,
addr 2, iclass 3/1
ums0: 3 buttons and Z dir.

/boot/loader.conf
agp_load="YES"
radeon_load="YES"
drm_load="YES"

relevant parts of xorg.log
(--) Chipset ATI Radeon IGP330M/340M/350M (U2) 4337 found

(II) RADEON(0): [drm] DRM interface version 1.2
(II) RADEON(0): [drm] created "radeon" driver at busid "pci:0000:01:05.0"
(II) RADEON(0): [drm] added 8192 byte SAREA at 0xc30fe000
(II) RADEON(0): [drm] mapped SAREA 0xc30fe000 to 0x2877a000
(II) RADEON(0): [drm] framebuffer handle = 0xe0000000
(II) RADEON(0): [drm] added 1 reserved context for kernel
(WW) RADEON(0): [agp] AGP not available
(EE) RADEON(0): [agp] AGP failed to initialize. Disabling the DRI.
(II) RADEON(0): [agp] You may want to make sure the agpgart kernel module
is loaded before the radeon kernel module.

(WW) RADEON(0): Direct rendering disabled



pciconf -lv
[EMAIL PROTECTED]:0:0:        class=0x060000 card=0x00000000 chip=0xcbb21002
rev=0x02 hdr=0x00
   vendor   = 'ATI Technologies Inc'
   device   = 'RS200 CPU to PCI Bridge'
   class    = bridge
   subclass = HOST-PCI
[EMAIL PROTECTED]:1:0: class=0x060400 card=0x00000000 chip=0x70101002 rev=0x00
hdr=0x01
   vendor   = 'ATI Technologies Inc'
   device   = 'RS200 PCI to AGP Bridge'
   class    = bridge
   subclass = PCI-PCI
[EMAIL PROTECTED]:3:0: class=0x070300 card=0x8158104d chip=0x545710b9 rev=0x00
hdr=0x00
   vendor   = 'Acer Labs Incorporated (ALi)'
   device   = 'ALI N5457, M1563M  AC97 Modem controller'
   class    = simple comms
   subclass = generic modem
[EMAIL PROTECTED]:4:0:  class=0x040100 card=0x8158104d chip=0x545110b9 rev=0x02
hdr=0x00
   vendor   = 'Acer Labs Incorporated (ALi)'
   device   = 'ALI M5451 PCI AC-Link Controller Audio Device'
   class    = multimedia
   subclass = audio
[EMAIL PROTECTED]:6:0: class=0x068000 card=0x8158104d chip=0x710110b9 rev=0x00
hdr=0x00
   vendor   = 'Acer Labs Incorporated (ALi)'
   device   = 'ALI M7101 Power Management Controller'
   class    = bridge
[EMAIL PROTECTED]:7:0: class=0x060100 card=0x8158104d chip=0x153310b9 rev=0x00
hdr=0x00
   vendor   = 'Acer Labs Incorporated (ALi)'
   device   = 'ALI M1533 Aladdin IV ISA Bridge'
   class    = bridge
   subclass = PCI-ISA
[EMAIL PROTECTED]:10:0: class=0x060700 card=0x8158104d chip=0x04761180 rev=0xaa
hdr=0x02
   vendor   = 'Ricoh Co Ltd'
   device   = 'RL5c476 CardBus Controller'
   class    = bridge
   subclass = PCI-CardBus
[EMAIL PROTECTED]:10:1: class=0x060700 card=0x8158104d chip=0x04761180 rev=0xaa
hdr=0x02
   vendor   = 'Ricoh Co Ltd'
   device   = 'RL5c476 CardBus Controller'
   class    = bridge
   subclass = PCI-CardBus
[EMAIL PROTECTED]:10:2:      class=0x0c0010 card=0x8158104d chip=0x05521180
rev=0x02 hdr=0x00
   vendor   = 'Ricoh Co Ltd'
   device   = 'RL5c552 IEEE-1394 Controller'
   class    = serial bus
   subclass = FireWire
[EMAIL PROTECTED]:12:0:        class=0x0c0300 card=0x8158104d chip=0x30381106
rev=0x50 hdr=0x00
   vendor   = 'VIA Technologies Inc'
   device   = 'VT82xxxxx UHCI USB 1.1 Controller (All VIA Chipsets)'
   class    = serial bus
   subclass = USB
[EMAIL PROTECTED]:12:1:        class=0x0c0300 card=0x8158104d chip=0x30381106
rev=0x50 hdr=0x00
   vendor   = 'VIA Technologies Inc'
   device   = 'VT82xxxxx UHCI USB 1.1 Controller (All VIA Chipsets)'
   class    = serial bus
   subclass = USB
[EMAIL PROTECTED]:12:2:        class=0x0c0320 card=0x8158104d chip=0x31041106
rev=0x51 hdr=0x00
   vendor   = 'VIA Technologies Inc'
   device   = 'VT6202 USB 2.0 Enhanced Host Controller'
   class    = serial bus
   subclass = USB
[EMAIL PROTECTED]:15:0:      class=0x0101fa card=0x8158104d chip=0x522910b9
rev=0xc4 hdr=0x00
   vendor   = 'Acer Labs Incorporated (ALi)'
   device   = 'M1543 Southbridge EIDE Controller'
   class    = mass storage
   subclass = ATA
[EMAIL PROTECTED]:18:0:  class=0x020000 card=0x8158104d chip=0x813910ec rev=0x10
hdr=0x00
   vendor   = 'Realtek Semiconductor'
   device   = 'RT8139 (A/B/C/810x/813x/C+) Fast Ethernet Adapter'
   class    = network
   subclass = ethernet
[EMAIL PROTECTED]:5:0:  class=0x030000 card=0x8158104d chip=0x43371002 rev=0x00
hdr=0x00
   vendor   = 'ATI Technologies Inc'
   device   = 'RS200M Mobility M6 (U2)'
   class    = display
   subclass = VGA
[EMAIL PROTECTED]:0:0:  class=0x020000 card=0x4b001385 chip=0x0013168c rev=0x01
hdr=0x00
   vendor   = 'Atheros Communications Inc.'
   device   = 'AR5212, AR5213 802.11a/b/g Wireless Adapter'
   class    = network
   subclass = ethernet
_______________________________________________
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Reply via email to