hi,
I'm sorry to bother you. I know you probably got something better to do. So
I'll just take a minute.
My system's been down for a while - anyway I wanted to add data from a cd, but
the prompt reads can't have more than 32 cd devices or drives. I couldn't
figure it out tried alot. So now
, in case some better, easier
to follow sites might be provided.
As far as I can read from the installation manual, FreeBsd's partitioning
scheme is different than linux, this is the 1st difference I know for now. I
would appreciate if you could direct me to web pages(if any) where
Hi,
Upon doing sudo some-command as a normal user (non-root), sudo asks for
password only once, subsequent invocations of sudo doesn't ask for password
- even though I do sudo -k or sudo -K in between.
Although sudo starts asking for password after the time stamp expiry.
in other words:
% sudo
someone to change a mascot with years of history, seems in no
way justified to me. For me, the key difference is not anyone's biases,
per se -- it's willful ignorance, which I am never inclined to justify or
excuse, in principle.
Back to the issue at hand (and actually on-topic), I
Yesterday, I wrote about CANNOT READ BLK from my new hd that I
filled via firewire:
http://lists.freebsd.org/pipermail/freebsd-questions/2008-July/179646.html
The response suggested to check for faulty hardware, which I am still
trying to do.
I found FreeBSD reporting the drive to have 128GB
Dear Philbert,
Thank you for joining Get Me A Ticket. You are only one click away from
entering many fantastic prize draw competitions absolutely free, all you have
to do is click on the link above.
http://email.getmeaticket.co.uk/a/tBHb4yDAdT41pBLHJcoBpAZgMli/[EMAIL
PROTECTED]ADDRESS=j29q8Bd85
I currently have an Adaptec 2010S raid card and want
to upgrade to a 2120S raid card. Any one know how to
do this with out wiping out the data on the hard
drive? Im currently running FreeBSD 4.10 and have both
DPT and AAC drivers in my kernel
Thanks
currently using now as well as my company. I guess my question is that will
the ease of building or installing software for FreeBSD ever streamline to
where you do not have to do as many steps and text config file entries?
What had me curious to asking this is this article I read about a review
sorry, test
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
sorry, test
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
googled already and found some references to nss_dns.so.1
and FreeBSD5.3 , but there were no suggestions or fixes that
I could find.
If this is a dead end, and you can let us know or write me to
give me any pointers, please do so at your convenience.
Barry A. Tigner
Electronics Shop mgr.
Physics
Where can i find a step by step upgrade method (from FreeBSD 4.10 to 5.2.1)?
Sorry if I seem lazy, but is somehow urgent (because a Plesk interface
must be installed).
Please post any link you think might be useful.
Thanks
___
[EMAIL PROTECTED] mailing
I forgot to say it : remote.
On Wed, 27 Oct 2004 07:01:02 +, Jeremy Faulkner [EMAIL PROTECTED] wrote:
On Wed, 2004-10-27 at 10:48, Mini Me wrote:
Where can i find a step by step upgrade method (from FreeBSD 4.10 to 5.2.1)?
Sorry if I seem lazy, but is somehow urgent (because a Plesk
like http://home.nyc.rr.com/computertaijutsu/FreeBSD53.html ?
On Wed, 27 Oct 2004 13:03:41 +0200, Mini Me [EMAIL PROTECTED] wrote:
I forgot to say it : remote.
On Wed, 27 Oct 2004 07:01:02 +, Jeremy Faulkner [EMAIL PROTECTED] wrote:
On Wed, 2004-10-27 at 10:48, Mini Me wrote
there is a 'but'!
Where is my Parallel Port ?
I mean, I'm inside of CUPS admin web page.
It's time to setup a printer.
I choice name, etc...
But when CUPS give me choice of the ports... there are
everyone but the printer port!
Maybe the kernel did not loaded !
I do a :
'dmesg | grep lpt0'
and it return :
lpt0
Hi, and thanks in advance for any help provided.
I am trying to install FreeBSD 4.10 on a new, clean ProLiant DL380 g3. It
has four 72.8 GB drives, and currently set up as a RAID5 by it's Smart
Array
5i boot controller.
How about installing via ftp ? thats what I have used in the past when
Hi,
I'm sure this has been asked before, but I cant find
any good info.
I'm having problems reinstalling the bootloader, i'm
running 5.2.1, I made it to the fixit console but when
i type boot0cfg -d da0, i get: I/O error.
Any Ideas?
Br,
Joe
-a ftp.freebsd.org
and cd /pub/FreeBSD/ports/packages/graphics
and get gimp-2.0.1,1.tgz.
I have tried this numerous times and was wondering if
you can help me.
This is greatly appreciated. Thank you.
__
Do you Yahoo!?
SBC Yahoo
Hi,
I've learn shell scripting and java on my freebsd box
since I migrated from winblows 98 a while back. now
i'm ready to move to a more sophisticated language. I
have decided to go with C++. Is there any bigginer
guides online that you may have run a cross that would
help me get started?
Joe
Thanks,
I will strongly consider your advice.
Tomorrow I'm heading out to barns and noble to pick up
some reading. Any good beginner C books you may
recommend?
thanks for your time every one!
Joe
--- jason [EMAIL PROTECTED] wrote:
Me wrote:
Hi,
I've learn shell scripting and java on my
emulation enabled.
could atapicam be causing this?
who knows, but now that I think about it, I will ssh
and recompile with out atapicam.
any suggestions are greatly appriciated.
--- Jonathan Arnold [EMAIL PROTECTED] wrote:
Me wrote:
---
When I try to change to udma100
hi,
I agree, best way would be to do as suggested. then
ssh that way,
the only thing you may have to do is walk the user on
entering single user mode to do a make installworld if
you're updating your system.
-Jose lima
--- JJB [EMAIL PROTECTED] wrote:
Install FBSD on local pc and when
That would be sufficient to create a script to monitor
the power state, maybe have the script check the
status again in 10 minutes and shutdown the PC if
necessary.
It can be done right?
--- Mike Tancsa [EMAIL PROTECTED] wrote:
On Tue, 6 Apr 2004 11:11:03 +0300, in
(1) so I dont
think that is the problem.
I'm open to any suggestions at this point.
after 3 days, my search has led me no where.
Jose Lima
I tryed to set hw.ata.tags=1, but I get: sysctl:
unknown oid 'hw.ata.tags'. my drive is supposed to
support this parameter..
http://www.gsp.com/cgi-bin
I'm using vinum Raid-1.
I have figured out how to recover from a failed disk.
Does any one know what to do if the disk that has the
vinum configuration/OS fails?
lets say I have a disk with a vinum partition on it
and I want to create a mirror out of it on an entire
new system. how do i
what about buying an external raid-box? then you dont have to care about
these questions ;)
the external box is doing raid 5 with hot standby disk and is connected
to the system via scsi and looks like one big drive.
the box itself is full of hot-swappable ide drives and the system does
not
Fetchmail retrieves mail from remote mail servers and forwards it via
SMTP, so it can then be read by normal mail user agents such as mutt,
elm(1) or BSD Mail. It allows all your system MTA's filtering,
forwarding, and aliasing facilities to work just as they would on normal
mail.
in short:
i made my fetchmail feed it into my exim using my local mailaddress as
recipient so it will go through amavis, spamassassin and finally
maildrop so it is inserted into my maildir.
greetings
ruediger
Matthew Seaman wrote:
On Thu, Jan 22, 2004 at 06:05:09PM +0200, mikko wrote:
I make a ssh
Do most people use Cups (out of ports) for printing? I can't get it to
start. I get an error saying it died with an error of 2 Child exited with
status 2!.
Any ideas?
Preston
___
[EMAIL PROTECTED] mailing list
hi,
i have a serious problem on a freebsd 4.6 on an i386...
any time i try to use the ipfw command - even for ipfw show - the
machine crashes and reboots automatically...
the messages log file registers this:
/kernel: Fatal trap 12: page fault while in kernel mode
Jan 18 19:34:09 host /kernel:
J.M. Industries
55 High St. Bld #7 North Billerica MA 01862
Phone (978) 663-5376 Fax (978) 663-5433
Just in..
CHA SE 600 filiment evaporator,
all manual valving, can be
J.M. Industries
55 High St. Bld #7 North Billerica MA 01862
Phone (978) 663-5376 Fax (978) 663-5433
Dear Fellow Engineers,
J.M. Industries has been serving universities and high tech
»ç¶ûÇÏ´Â ¿ì¸® µÎµþÀÌ ¾îÀ̾ø°Ô Á×¾ú´Ù.
±×ºÎ¸ðÀÇ ¸¶À½À» ´©°¡ ¾Ë·ª. ½Ã°£ÀÌ Áö³ª¸é ¶Ç ¿ì¸® ±â¾ï¿¡¼ »ç¶óÁú°ÍÀÌ°í.
¹«Á˶õ´Ù, ÀÌÁ¦ ÇǾî¿À¸£´ø Ç츼Àº ¿ì¸® µÎ ¾ÆÀ̵éÀÌ ÅÊÅ© ¹Ø¿¡¼..
Á˾ø¾ú´ø ±× µÎ ¹Ì±¹ ÀþÀº À̵éÀº ¿Ö ³²ÀÇ ³ª¶ó±îÁö ¿Í¼ ÀÌ·±ÀÏÀ» ¸¸µé¾ú´Â°¡.
Á¼°í À§Çè ±æ·Î ¸ÅÀÏ Çб³´Â °¡¾ß¸¸ Çß´ø Á×Àº
33 matches
Mail list logo
