A DLT unit on /dev/sa0 is really slow

[David Landgren]

List,

I have an external DLT tape (a COMPAQ DLT VS 40/80 5133 according to 
camcontrol). It seems glacially slow to me. Last night I backed up 
many gigabytes of files from a remote machine over NFS. It took over 
five hours to do it. My overworked Sun E-450 will do this in a shade 
over three hours.

What is more, the remote machine and my FreeBSD box have gigabit 
Ethernet adapters, and both machines, as well as the switch they are 
connected to all report 1000baseT full duplex. The sun, on the other 
hand, is running 100baseT.

When I run a tar t to list the contents of the archive, the output 
is really slow. It's taken about half an hour so far to list the first 
50 or so files (and none are exceptionally big, 10Mb on average).

When I listen to the tape drive, I hear it start and stop frequently, 
with lots of pauses. I would have expected it to spin continuously. It 
is, after all, a *streaming* device.

All of which makes me think that something is going unspecified 
somewhere. Something like a preferred block size?

'mt stat' produces the following:

Mode  Density  Blocksize  bpi  Compression
Current:  0x40 variable   0IDRC
-available modes-
0:0x40 variable   0IDRC
1:0x40 variable   0IDRC
2:0x40 variable   0IDRC
3:0x40 variable   0IDRC
-
Current Driver State: at rest.
-
File Number: 0  Record Number: 0Residual Count 0
Can I manually configure a mode that would have better performance 
characteristics? Thanks for any tips you might have,

David

___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]

Re: A DLT unit on /dev/sa0 is really slow

[Dan Nelson]

In the last episode (Aug 26), David Landgren said:
 I have an external DLT tape (a COMPAQ DLT VS 40/80 5133 according to
 camcontrol). It seems glacially slow to me. Last night I backed up
 many gigabytes of files from a remote machine over NFS. It took over
 five hours to do it. My overworked Sun E-450 will do this in a shade
 over three hours.
 
 What is more, the remote machine and my FreeBSD box have gigabit
 Ethernet adapters, and both machines, as well as the switch they are
 connected to all report 1000baseT full duplex. The sun, on the other
 hand, is running 100baseT.

 When I run a tar t to list the contents of the archive, the output
 is really slow. It's taken about half an hour so far to list the
 first 50 or so files (and none are exceptionally big, 10Mb on
 average).
 
 When I listen to the tape drive, I hear it start and stop frequently,
 with lots of pauses. I would have expected it to spin continuously.
 It is, after all, a *streaming* device.

DLTs will only stream if they are fed data at a fast enough rate;
otherwise they shoeshine.  Try running with a 64k blocksize instead of
tar's default 10k ( tar cb 128 ) .
 
-- 
Dan Nelson
[EMAIL PROTECTED]
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]