I have an Intel Wifi Link 1000 BGN NIC that
I'm having trouble getting to work. I have
FreeBSD 8.3 installed. I looked in the NOTES file under
/usr/src/sys/conf
for the driver and did not see it listed. It is PCI.
I have tried to configure the settings
via the sysinstall command post
I just ran into an unusual problem, and I need some help. I am trying to
integrate a firewall in my network, based on 5.2.1.Release and Ipfilter.
I actually had everything working, and did something that I think caused
my problem. I tried to ssh into my firewall and I accidentally used the
wrong
Heya Andy
Right under the line for rl0 I see this:
options=8VLAN_MTU
IT only specifies that it uses a VLAN_MTU, which limit's the size of the
packet's being transmitted.
It does not tell you that you actually use a VLAN thingy.
How can I recreate the rl0 interface without the VLAN option?
I
Hello,
I have recently installed a RealTek 8029 NIC into my FreeBSD machine but am
unable to get it to work.
The kernel finds and loads it at boot time, and ifconfig displays it. But I
get no response when I ping it.
What I did notice though, when checking my syslog it displays the NIC and
IRQ
Dear all,
I have a DE-220 10M NIC connect to a server with
realtek
8139 NIC using cross over cable. The transfer speed
usually over 500K bytes. Recently, the server crashed
and I have to connect this DE-220 NIC to another
server with Intel 82559 NIC using the same cross over
cable. After that,
Vincent Chen [EMAIL PROTECTED] writes:
I have a DE-220 10M NIC connect to a server with
realtek
8139 NIC using cross over cable. The transfer speed
usually over 500K bytes. Recently, the server crashed
and I have to connect this DE-220 NIC to another
server with Intel 82559 NIC using the
On Tue, Sep 17, 2002 at 11:55:03PM -0400, dfolkins wrote:
here is a just in case:
have you tried using different ports on the switch? or a different switch?
Yes, I have. I found out that this card and another card in another
box have the same MAC address.
--
At Wed, 18 Sep 2002 it looks like Bob Bomar composed:
On Tue, Sep 17, 2002 at 11:55:03PM -0400, dfolkins wrote:
here is a just in case:
have you tried using different ports on the switch? or a different switch?
Yes, I have. I found out that this card and another card in another
On Tue, Sep 17, 2002 at 08:22:21PM -0400, Bob Bomar wrote:
I have a dual P-200 file server that is haveing some connection
problems. When I ssh to the box, I login in fine, but some times
it lags for a while, but the two boxes are physically sitting next
to each other, and are on ports that
On Tue, 17 Sep 2002, Bob Bomar wrote:
I have a dual P-200 file server that is haveing some connection
problems. When I ssh to the box, I login in fine, but some times
it lags for a while, but the two boxes are physically sitting next
to each other, and are on ports that are side by side on
I have a dual P-200 file server that is haveing some connection
problems. When I ssh to the box, I login in fine, but some times
it lags for a while, but the two boxes are physically sitting next
to each other, and are on ports that are side by side on the
switch. While I ssh out of the box
On Tue, 17 Sep 2002, Bob Bomar wrote:
I have a dual P-200 file server that is haveing some connection
problems. When I ssh to the box, I login in fine, but some times it
lags for a while, but the two boxes are physically sitting next to each
other, and are on ports that are side by side on
A linksys, dc0, and the switch is a linksys 8-port, so I cant see any
errors. I have swaped it out with an Intel card, fxp0, but it does the
same thing.
Anything wierd in the logfiles? Any device timeouts, eg fxp0
device timeout?
There are no messages regarding
On Tue, Sep 17, 2002 at 09:13:52PM -0400, John wrote:
On your p200...
run 'netstat -i'
ssh p200
do some intermitant stuff..
close ssh session
run 'netstat -i' again...
Look for any errors on the interface you are using.
Please post the results back.
-John
Just did that,
- Original Message -
From: Bob Bomar [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Tuesday, September 17, 2002 8:22 PM
Subject: NIC problem
here is a just in case:
have you tried using different ports on the switch? or a different switch?
--
dfolkins
To Unsubscribe: send mail
15 matches
Mail list logo
