Re: HP Proliant DL360 G5
Julien Cigar пишет: Dear FreeBSD users, Our hardware begins to age and we plan to buy two new machines at HP. Our choice focused on the HP Proliant DL360 G5. As HP doesn't officially support FreeBSD, I checked with the 7.0-RELEASE Hardware Notes and everything seems to be supported, except the network interface which is an HP NC373i. From what I can see, only NC370i and NC370T are supported. Can someone confirm that this chip is not supported (and that the rest is OK) ? If you have other comments about our choice they are welcome too ... from dmesg bce0: Broadcom NetXtreme II BCM5708 1000Base-T (B2) mem 0xf800-0xf9ff irq 18 at device 0.0 on pci3 miibus0: MII bus on bce0 brgphy0: BCM5708C 10/100/1000baseTX PHY PHY 1 on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto bce0: Ethernet address: 00:22:64:06:f8:96 bce0: [ITHREAD] bce0: ASIC (0x57081020); Rev (B2); Bus (PCI-X, 64-bit, 133MHz); F/W (0x01090605); Flags( MFW MSI ) bce1: Broadcom NetXtreme II BCM5708 1000Base-T (B2) mem 0xfa00-0xfbff irq 19 at device 0.0 on pci5 miibus1: MII bus on bce1 brgphy1: BCM5708C 10/100/1000baseTX PHY PHY 1 on miibus1 brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto bce1: Ethernet address: 00:22:64:06:f8:8a bce1: [ITHREAD] bce1: ASIC (0x57081020); Rev (B2); Bus (PCI-X, 64-bit, 133MHz); F/W (0x01090605); Flags( MFW MSI ) ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: HP Proliant DL360 G5
Hello, On Wed, 2008-10-29 at 13:27 +0100, Julien Cigar wrote: Our hardware begins to age and we plan to buy two new machines at HP. Our choice focused on the HP Proliant DL360 G5. As HP doesn't officially support FreeBSD, I checked with the 7.0-RELEASE Hardware Notes and everything seems to be supported, except the network interface which is an HP NC373i. From what I can see, only NC370i and NC370T are supported. Can someone confirm that this chip is not supported I have just got two new DL360G5 with xeon E5420 cpus (HP Ref Number: 470064-731), and the on-board network cards are seen from FreeBSD7 as: bce0: Broadcom NetXtreme II BCM5708 1000Base-T (B2) mem 0xf800-0xf9ff irq 18 at device 0.0 on pci3 miibus0: MII bus on bce0 brgphy0: BCM5708C 10/100/1000baseTX PHY PHY 1 on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto bce0: Ethernet address: 00:21:5a:a6:8f:f0 bce0: [ITHREAD] bce0: ASIC (0x57081020); Rev (B2); Bus (PCI-X, 64-bit, 133MHz); F/W (0x01090605); Flags( MFW MSI ) So there are good chances it's the same on your setup? But maybe it's a new model of mainboard... regards HTH, Olivier ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: HP Proliant DL360 G5
The one we plan to buy is this one (457922-421) : http://h10010.www1.hp.com/wwpc/be/fr/sm/WF06b/15351-15351-3328412-241475-241475-1121486-3633805.html It seems to be the same network chipset as in yours .. (https://h10057.www1.hp.com/ecomcat/hpcatalog/specs/provisioner/05/470064-731.htm) So I can consider that it's supported .. good! :-) Thanks for your answers On Wed, 2008-10-29 at 14:05 +0100, Olivier Mueller wrote: Hello, On Wed, 2008-10-29 at 13:27 +0100, Julien Cigar wrote: Our hardware begins to age and we plan to buy two new machines at HP. Our choice focused on the HP Proliant DL360 G5. As HP doesn't officially support FreeBSD, I checked with the 7.0-RELEASE Hardware Notes and everything seems to be supported, except the network interface which is an HP NC373i. From what I can see, only NC370i and NC370T are supported. Can someone confirm that this chip is not supported I have just got two new DL360G5 with xeon E5420 cpus (HP Ref Number: 470064-731), and the on-board network cards are seen from FreeBSD7 as: bce0: Broadcom NetXtreme II BCM5708 1000Base-T (B2) mem 0xf800-0xf9ff irq 18 at device 0.0 on pci3 miibus0: MII bus on bce0 brgphy0: BCM5708C 10/100/1000baseTX PHY PHY 1 on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto bce0: Ethernet address: 00:21:5a:a6:8f:f0 bce0: [ITHREAD] bce0: ASIC (0x57081020); Rev (B2); Bus (PCI-X, 64-bit, 133MHz); F/W (0x01090605); Flags( MFW MSI ) So there are good chances it's the same on your setup? But maybe it's a new model of mainboard... regards HTH, Olivier -- Julien Cigar Belgian Biodiversity Platform http://www.biodiversity.be Université Libre de Bruxelles (ULB) Campus de la Plaine CP 257 Bâtiment NO, Bureau 4 N4 115C (Niveau 4) Boulevard du Triomphe, entrée ULB 2 B-1050 Bruxelles Mail: [EMAIL PROTECTED] @biobel: http://biobel.biodiversity.be/person/show/471 Tel : 02 650 57 52 ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]