On 22 May 2010, at 21:05, Adam Vande More wrote:
> On Sat, May 22, 2010 at 11:01 PM, Doug Hardie wrote:
>
> Both machines were installed from the same CD over old Windows systems. They
> were installed within a few days of each other. loader.conf only has
> "console=comconsole". Reading th
On Sat, May 22, 2010 at 11:01 PM, Doug Hardie wrote:
>
> Both machines were installed from the same CD over old Windows systems.
> They were installed within a few days of each other. loader.conf only has
> "console=comconsole". Reading through the handbook page above it indicates
> that atapi
On 22 May 2010, at 20:47, Adam Vande More wrote:
> On Sat, May 22, 2010 at 10:20 PM, Doug Hardie wrote:
> I have 2 systems running 8.0 installed from the same CD. One of them shows 2
> PASS devices as expected and camcontrol devlist shows the appropriate
> devices. They work as expected.
>
On Sat, May 22, 2010 at 10:20 PM, Doug Hardie wrote:
> I have 2 systems running 8.0 installed from the same CD. One of them shows
> 2 PASS devices as expected and camcontrol devlist shows the appropriate
> devices. They work as expected.
>
> The other does not show any PASS devices and camcontr
I have 2 systems running 8.0 installed from the same CD. One of them shows 2
PASS devices as expected and camcontrol devlist shows the appropriate devices.
They work as expected.
The other does not show any PASS devices and camcontrol devlist shows nothing.
Doing a kldload atapicam installs
--- Rob <[EMAIL PROTECTED]> wrote:
>
> --- "Daniel S. Haischt" wrote:
> >
> > Can you read through the attached PR and comment
> > its contents, please?
>
> It's a little too technical for me, but let me add
> the components of one of my trouble PCs:
>
> atapci0:
> ad0: 43979MB
> [89355/16/
--- "Daniel S. Haischt" wrote:
>
> Can you read through the attached PR and comment
> its contents, please?
It's a little too technical for me, but let me add
the components of one of my trouble PCs:
atapci0:
ad0: 43979MB [89355/16/63]
at ata0-master PIO4
acd0: CDROM at ata1-master PIO4
Hello,
I think time has come to fill a problem report.
I did started a initial one, which is attached
to this mail.
Can you read through the attached PR and comment
its contents, please?
Rob schrieb:
Hope this helps someone. I'm not at all sure
where/what the problem is but
I'll be happy to run on
> Hope this helps someone. I'm not at all sure
> where/what the problem is but
> I'll be happy to run on the embedded controller for
> the time being. (while
> PIO 4 != DMA 133, reliability/functionality is
king!)
Neither have I an idea what going on here, but
after having upgraded a few PCs fr
Greetings,
Just an update I pulled out the Promise adapter and connected my disk to the
primary embedded IDE controller (max speed PIO 4) Left the atapi CDRW drive
as a SLAVE on the secondary controller. Next, I tried ripping an audio CD with
cdda2wav, and to my surprise, it was successful
10 matches
Mail list logo
