On 10/8/10, Eitan Adler li...@eitanadler.com wrote:
Finally, thank to Freenode's ##freebsd I tried wpa_supplicant which worked.
I can now connect to the internet.
I'd still like to know why I must use the program and I can't use the
raw commands though.
So OPEN authmode is broken somehow?
On Fri, Oct 8, 2010 at 12:15 PM, Paul B Mahol one...@gmail.com wrote:
On 10/8/10, Eitan Adler li...@eitanadler.com wrote:
Finally, thank to Freenode's ##freebsd I tried wpa_supplicant which worked.
I can now connect to the internet.
I'd still like to know why I must use the program and I
On a fresh 8.1-RELEASE install
ifconfig wlan0 scan results in no output and takes forever (ie - it hangs)
ifconfig wlan0 ssid my_ssid
dhclient wlan0
results in no link being discovered
Here is some relevant system config and such to help diagnose the problem:
#ifconfig wlan0 create wlandev bwn0
On 10/7/10, Eitan Adler li...@eitanadler.com wrote:
On a fresh 8.1-RELEASE install
ifconfig wlan0 scan results in no output and takes forever (ie - it hangs)
If you set wlan0 for manual roaming it will not hang.
Use 'ifconfig wlan0 list scan' instead.
ifconfig wlan0 ssid my_ssid
dhclient
ifconfig wlan0 scan results in no output and takes forever (ie - it hangs)
If you set wlan0 for manual roaming it will not hang.
Use 'ifconfig wlan0 list scan' instead.
That worked, thanks.
dhclient still results in no link being found.
ifconfig wlan0 ssid my_ssid
dhclient wlan0
results
On 10/7/10, Eitan Adler li...@eitanadler.com wrote:
ifconfig wlan0 scan results in no output and takes forever (ie - it
hangs)
If you set wlan0 for manual roaming it will not hang.
Use 'ifconfig wlan0 list scan' instead.
That worked, thanks.
dhclient still results in no link being found.
On Thu, Oct 7, 2010 at 2:31 PM, Paul B Mahol one...@gmail.com wrote:
On 10/7/10, Eitan Adler li...@eitanadler.com wrote:
ifconfig wlan0 scan results in no output and takes forever (ie - it
hangs)
If you set wlan0 for manual roaming it will not hang.
Use 'ifconfig wlan0 list scan' instead.
On 10/7/10, Eitan Adler li...@eitanadler.com wrote:
On Thu, Oct 7, 2010 at 2:31 PM, Paul B Mahol one...@gmail.com wrote:
On 10/7/10, Eitan Adler li...@eitanadler.com wrote:
ifconfig wlan0 scan results in no output and takes forever (ie - it
hangs)
If you set wlan0 for manual roaming it will
Looks like you cant associate at all.
Also signal power is too low.
Why is INT (beacon interval of AP) 102 ?
These are the defaults - I have no idea what these numbers mean. What
should/could I be changing?
--
Eitan Adler
___
On 10/7/10, Eitan Adler li...@eitanadler.com wrote:
Looks like you cant associate at all.
Also signal power is too low.
Why is INT (beacon interval of AP) 102 ?
These are the defaults - I have no idea what these numbers mean. What
should/could I be changing?
I doubt that AP have
On Thu, Oct 7, 2010 at 5:22 PM, Paul B Mahol one...@gmail.com wrote:
On 10/7/10, Eitan Adler li...@eitanadler.com wrote:
Looks like you cant associate at all.
Also signal power is too low.
Why is INT (beacon interval of AP) 102 ?
These are the defaults - I have no idea what these numbers
Sorry for the reply-to-self
On Thu, Oct 7, 2010 at 9:11 PM, Eitan Adler li...@eitanadler.com wrote:
On Thu, Oct 7, 2010 at 5:22 PM, Paul B Mahol one...@gmail.com wrote:
On 10/7/10, Eitan Adler li...@eitanadler.com wrote:
Looks like you cant associate at all.
Also signal power is too low.
On 10/7/10, Eitan Adler li...@eitanadler.com wrote:
On Thu, Oct 7, 2010 at 5:22 PM, Paul B Mahol one...@gmail.com wrote:
On 10/7/10, Eitan Adler li...@eitanadler.com wrote:
Looks like you cant associate at all.
Also signal power is too low.
Why is INT (beacon interval of AP) 102 ?
These
On Thu, Oct 7, 2010 at 9:14 PM, Paul B Mahol one...@gmail.com wrote:
On 10/7/10, Eitan Adler li...@eitanadler.com wrote:
On Thu, Oct 7, 2010 at 5:22 PM, Paul B Mahol one...@gmail.com wrote:
On 10/7/10, Eitan Adler li...@eitanadler.com wrote:
Looks like you cant associate at all.
Also signal
Finally, thank to Freenode's ##freebsd I tried wpa_supplicant which worked.
I can now connect to the internet.
I'd still like to know why I must use the program and I can't use the
raw commands though.
On Thu, Oct 7, 2010 at 9:18 PM, Eitan Adler li...@eitanadler.com wrote:
On Thu, Oct 7, 2010
15 matches
Mail list logo