Hi,
I have a critical problem with Acard ATP865 UDMA133 Controller Raid IDE.
I can create and mount my array ar0 raid without any problem.
I can also create directories but when I use tar (a smal archive 1,1Mo) my array
is broken immediatly.
I have mount my array like this
# mout -t ufs /dev/ar0s1 /usr/local/w3
# cd /usr/local/w3
# mkdir db # OK
# tar zxvf data.tar.gz # Seems ok but before the end of command I get
ad8 : WARNING no status, reselecting device.
ad8 : error issuing command=ca
ad8 : error issuing DMA command
ar0: 39205MB <aTA RAID1 array> [4998/255/63] status: DEGRADED subdisks:
And my system freezes and go down kernel panic trap 12.
This controller worked fine on freebsd 5.2.0 and after upgraded to
freebsd-5.2.1-p11, my controleur doesn't work.
How can I solve my problem. And sorry for my bad english
Thanks.
Regards.
# uname -a
FreeBSD tuxy.homelinux.misc 5.2.1-RELEASE-p11 FreeBSD 5.2.1-RELEASE-p11 #2: Tue
Oct 19 21:07:44 CEST 2004
[EMAIL PROTECTED]:/usr/obj/usr/src/sys/BSDCORTUX i386
I joint my dmesg -a output
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.2.1-RELEASE-p11 #2: Tue Oct 19 21:07:44 CEST 2004
[EMAIL PROTECTED]:/usr/obj/usr/src/sys/BSDCORTUX
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0918000.
Preloaded elf module "/boot/kernel/linux.ko" at 0xc09181f4.
MPTable: <OEM00000 PROD00000000>
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel Pentium III (733.35-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x683 Stepping = 3
Features=0x387fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,PN,MMX,FXSR,SSE>
real memory = 1073676288 (1023 MB)
avail memory = 1033523200 (985 MB)
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0: Assuming intbase of 0
ioapic0 <Version 1.1> irqs 0-23 on motherboard
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcibios: BIOS version 2.10
Using $PIR table, 9 entries at 0xc00fdcf0
pcib0: <MPTable Host-PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pcib0: slot 7 INTD routed to irq 9
pcib0: slot 7 INTD routed to irq 9
pcib0: slot 12 INTA routed to irq 10
pcib0: slot 15 INTA routed to irq 11
pcib0: slot 16 INTA routed to irq 10
pcib0: slot 17 INTA routed to irq 9
agp0: <VIA 82C691 (Apollo Pro) host to PCI bridge> mem 0xd8000000-0xdbffffff at device
0.0 on pci0
pcib1: <MPTable PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pcib1: slot 0 INTA routed to irq 11
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686A UDMA66 controller> port 0x9000-0x900f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
uhci0: <VIA 83C572 USB controller> port 0x9400-0x941f irq 9 at device 7.2 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0x9800-0x981f irq 9 at device 7.3 on pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
atapci1: <Promise PDC20265 UDMA100 controller> port
0xac00-0xac3f,0xa800-0xa803,0xa400-0xa407,0xa000-0xa003,0x9c00-0x9c07 mem
0xdf000000-0xdf01ffff irq 10 at device 12.0 on pci0
atapci1: [MPSAFE]
ata2: at 0x9c00 on atapci1
ata2: [MPSAFE]
ata3: at 0xa400 on atapci1
ata3: [MPSAFE]
atapci2: <Acard ATP865R UDMA133 controller> port
0xc000-0xc00f,0xbc00-0xbc03,0xb800-0xb807,0xb400-0xb403,0xb000-0xb007 irq 11 at device
15.0 on pci0
atapci2: [MPSAFE]
ata4: at 0xb000 on atapci2
ata4: [MPSAFE]
ata5: at 0xb800 on atapci2
ata5: [MPSAFE]
xl0: <3Com 3c905-TX Fast Etherlink XL> port 0xc400-0xc43f irq 10 at device 16.0 on pci0
xl0: Ethernet address: 00:60:08:ca:1f:80
miibus0: <MII bus> on xl0
nsphy0: <DP83840 10/100 media interface> on miibus0
nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci0: <network, ethernet> at device 17.0 (no driver attached)
orm0: <Option ROMs> at iomem
0xd6000-0xd7fff,0xd4000-0xd5fff,0xd0000-0xd3fff,0xc0000-0xcc7ff on isa0
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port
0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0c02> can't assign resources (memory)
unknown: <PNP0f13> can't assign resources (irq)
unknown: <PNP0700> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0400> can't assign resources (port)
Timecounters tick every 10.000 msec
GEOM: create disk ad0 dp=0xc6ade860
ad0: 29314MB <IBM-DTLA-307030> [59560/16/63] at ata0-master UDMA66
acd0: CDRW <HL-DT-ST GCE-8523B> at ata1-master PIO4
acd1: CDRW <Hewlett-Packard CD-Writer Plus 8000> at ata1-slave PIO3
GEOM: create disk ad4 dp=0xc6ade660
ad4: 38166MB <ST340016A> [77545/16/63] at ata2-master UDMA100
GEOM: create disk ad8 dp=0xc69f0d60
ad8: 39205MB <Maxtor 6E040L0> [79656/16/63] at ata4-master UDMA133
GEOM: create disk ad10 dp=0xc6ade560
ad10: 39205MB <Maxtor 6E040L0> [79656/16/63] at ata5-master UDMA133
SMP: AP CPU #1 Launched!
Mounting root from ufs:/dev/ad0s1a
Loading configuration files.
Entropy harvesting:
interrupts
ethernet
point_to_point
.
Configuring CCD devices.
swapon: adding /dev/ad0s1b as swap device
Starting file system checks:
/dev/ad0s1a: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad0s1a: clean, 132970 free (970 frags, 16500 blocks, 0.6% fragmentation)
/dev/ad4s1d: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad4s1d: clean, 18751038 free (62 frags, 2343872 blocks, 0.0% fragmentation)
/dev/ad0s1h: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad0s1h: clean, 7942239 free (207 frags, 992754 blocks, 0.0% fragmentation)
/dev/ad0s1f: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad0s1f: clean, 895339 free (13523 frags, 110227 blocks, 0.7% fragmentation)
/dev/ad0s1g: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad0s1g: clean, 1622548 free (5828 frags, 202090 blocks, 0.3% fragmentation)
/dev/ad0s1e: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad0s1e: clean, 107681 free (561 frags, 13390 blocks, 0.4% fragmentation)
Setting hostname: tuxy.homelinux.misc.
xl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=8<VLAN_MTU>
inet 192.168.2.21 netmask 0xffffff00 broadcast 192.168.2.255
inet6 fe80::260:8ff:feca:1f80%xl0 prefixlen 64 tentative scopeid 0x1
ether 00:60:08:ca:1f:80
media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet 127.0.0.1 netmask 0xff000000
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3
add net default: gateway 192.168.2.254
Additional routing options:
.
add net ::ffff:0.0.0.0: gateway ::1
add net ::0.0.0.0: gateway ::1
net.inet6.ip6.forwarding:
0
->
0
net.inet6.ip6.accept_rtadv:
0
->
1
add net fe80::: gateway ::1
add net ff02::: gateway ::1
IPv4 mapped IPv6 address support=NO
hw.bus.devctl_disable:
0
->
1
Mounting NFS file systems:
.
Starting syslogd.
Oct 21 18:23:16 tuxy syslogd: kernel boot file is /boot/kernel/kernel
Starting named.
Starting rpcbind.
NFS access cache time=2
ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/X11R6/lib /usr/local/lib
a.out ldconfig path: /usr/lib/aout /usr/lib/compat/aout /usr/X11R6/lib/aout
Starting statd.
Starting lockd.
Starting usbd.
Starting local daemons:
.
Updating motd
.
Configuring syscons:
keymap
font8x16
font8x14
font8x8
blanktime
screensaver
.
Starting sshd.
Initial i386 initialization:
.
Additional ABI support:
linux
.
Starting cron.
Local package initialization:
mysqld
.
Additional TCP options:
.
Starting moused:
.
Starting background file system checks in 60 seconds.
Thu Oct 21 18:23:22 CEST 2004
_______________________________________________
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
