Hello All,
Brand new Dell M90 here, replacing the directors Linux laptop w/ a
FreeBSD.. and of course it's not a smooth one.. :p
dmesg at bottom..
the bge0 device gives a firmware handshake timed out, when trying to get
dhcp. Using a Netgear/Dlink (at his home) he says it never gets an IP,
we have isc-dhcp both as a actual server and on a pfsense testing
network here and it takes it a minute+ to get an IP.
He of course can not wait that long..
Any ideas?
Its running gnome2 from ports - not packages.. and the snd_hda from
binary.. as well as nvidia driver compiled from ports.
dmesg -a below:
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-RELEASE-p3 #0: Wed Apr 11 11:23:59 EDT 2007
root@:/usr/obj/usr/src/sys/DellM90
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Core(TM)2 CPU T7600 @ 2.33GHz (2330.23-MHz
686-class CPU)
Origin = "GenuineIntel" Id = 0x6f6 Stepping = 6
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0xe3bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,TM2,<b9>,CX16,<b14>,<b15>>
AMD Features=0x20100000<NX,LM>
AMD Features2=0x1<LAHF>
Cores per package: 2
real memory = 2145939456 (2046 MB)
avail memory = 2086424576 (1989 MB)
ACPI APIC Table: <DELL M07 >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0: Changing APIC ID to 2
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <DELL M07 > on motherboard
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
cpu1: <ACPI CPU> on acpi0
acpi_throttle1: <ACPI CPU Throttling> on cpu1
acpi_throttle1: failed to attach P_CNT
device_attach: acpi_throttle1 attach returned 6
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
nvidia0: <Quadro FX 1500M> port 0xef00-0xef7f mem
0xed000000-0xedffffff,0xd0000000-0xdfffffff,0xee000000-0xeeffffff irq 16
at device 0.0 on pci1
nvidia0: [GIANT-LOCKED]
pcm0: <Intel 82801G High Definition Audio Controller> mem
0xefffc000-0xefffffff irq 21 at device 27.0 on pci0
pcib2: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pci11: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 28.2 on pci0
pci9: <ACPI PCI bus> on pcib3
bge0: <Broadcom BCM5752 A2, ASIC rev. 0x6002> mem 0xecff0000-0xecffffff
irq 18 at device 0.0 on pci9
bge0: firmware handshake timed out
miibus0: <MII bus> on bge0
brgphy0: <BCM5752 10/100/1000baseTX PHY> on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX,
1000baseTX-FDX, auto
bge0: Ethernet address: 00:18:8b:c3:93:d3
pcib4: <ACPI PCI-PCI bridge> at device 28.3 on pci0
pci12: <ACPI PCI bus> on pcib4
uhci0: <UHCI (generic) USB controller> port 0xbf80-0xbf9f irq 20 at
device 29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0xbf60-0xbf7f irq 21 at
device 29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <UHCI (generic) USB controller> port 0xbf40-0xbf5f irq 22 at
device 29.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <UHCI (generic) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <UHCI (generic) USB controller> port 0xbf20-0xbf3f irq 23 at
device 29.3 on pci0
uhci3: [GIANT-LOCKED]
usb3: <UHCI (generic) USB controller> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem
0xffa80000-0xffa803ff irq 20 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
uhub5: vendor 0x413c product 0xa005, class 9/0, rev 2.00/50.18, addr 2
uhub5: multiple transaction translators
uhub5: 4 ports with 1 removable, self powered
uhub6: vendor 0x0b97 product 0x7761, class 9/0, rev 1.10/1.10, addr 3
uhub6: 3 ports with 2 removable, bus powered
ugen0: O2 O2Micro CCID SC Reader, rev 1.10/1.10, addr 4
uhub7: vendor 0x413c product 0x0058, class 9/0, rev 2.00/10.00, addr 5
uhub7: multiple transaction translators
uhub7: 4 ports with 4 removable, self powered
uhub8: vendor 0x413c product 0x0058, class 9/0, rev 2.00/10.00, addr 6
uhub8: multiple transaction translators
uhub8: 4 ports with 4 removable, self powered
pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci3: <ACPI PCI bus> on pcib5
fwohci0: <1394 Open Host Controller Interface> mem 0xecbff800-0xecbfffff
irq 19 at device 1.0 on pci3
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 42:4f:c0:00:2a:80:dd:61
fwohci0: Phy 1394a available S400, 1 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 42:4f:c0:80:dd:61
fwe0: Ethernet address: 42:4f:c0:80:dd:61
fwe0: if_start running deferred for Giant
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
pci3: <base peripheral> at device 1.1 (no driver attached)
pci3: <base peripheral> at device 1.2 (no driver attached)
pci3: <base peripheral> at device 1.3 (no driver attached)
pci3: <base peripheral> at device 1.4 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH7M SATA300 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xbfa0-0xbfaf irq 17 at device 31.2
on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64,0x62,0x66 irq 1 on
acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Synaptics Touchpad, device ID 0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
acpi0
sio0: type 16550A
ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77b irq 7 drq
1 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/7 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcdfff,0xce000-0xcffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 1.000 msec
ad0: 95396MB <Hitachi HTS721010G9SA00 MCZOC10H> at ata0-master SATA150
acd0: DVDR <Optiarc DVD+/-RW AD-5540A/102C> at ata1-master UDMA33
pcm0: <HDA Codec: Sigmatel STAC9220>
pcm0: <HDA Driver Revision: 20070409_0044>
SMP: AP CPU #1 Launched!
cd0 at ata1 bus 0 target 0 lun 0
cd0: <Optiarc DVD+-RW AD-5540A 102C> Removable CD-ROM SCSI-0 device
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
Trying to mount root from ufs:/dev/ad0s2a
Loading configuration files.
Entropy harvesting:
interrupts
ethernet
point_to_point
kickstart
.
swapon: adding /dev/ad0s2b as swap device
Starting file system checks:
/dev/ad0s2a: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad0s2a: clean, 974871 free (2479 frags, 121549 blocks, 0.2%
fragmentation)
/dev/ad0s2g: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad0s2g: clean, 4560007 free (151 frags, 569982 blocks, 0.0%
fragmentation)
/dev/ad0s2d: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad0s2d: clean, 1631518 free (58318 frags, 196650 blocks, 1.4%
fragmentation)
/dev/ad0s2e: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad0s2e: clean, 2607774 free (4678 frags, 325387 blocks, 0.1%
fragmentation)
/dev/ad0s2f: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad0s2f: clean, 1972783 free (1615 frags, 246396 blocks, 0.1%
fragmentation)
Mounting local file systems:
.
Setting hostname: DellM90-fbsd.
net.inet6.ip6.auto_linklocal:
1
->
0
kern.ipc.shmmax:
33554432
->
536870912
kern.ipc.shm_use_phys:
0
->
1
security.bsd.see_other_uids:
1
->
0
net.inet.ip.random_id:
0
->
1
kern.randompid:
0
->
10000
kern.coredump:
1
->
0
bge0: firmware handshake timed out
bge0: no link ...
.
got link
DHCPDISCOVER on bge0 to 255.255.255.255 port 67 interval 4
DHCPDISCOVER on bge0 to 255.255.255.255 port 67 interval 11
DHCPDISCOVER on bge0 to 255.255.255.255 port 67 interval 8
DHCPDISCOVER on bge0 to 255.255.255.255 port 67 interval 15
DHCPDISCOVER on bge0 to 255.255.255.255 port 67 interval 20
DHCPDISCOVER on bge0 to 255.255.255.255 port 67 interval 3
No DHCPOFFERS received.
No working leases in persistent database - sleeping.
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x4
inet6 ::1 prefixlen 128
inet 127.0.0.1 netmask 0xff000000
bge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
inet 0.0.0.0 netmask 0xff000000 broadcast 255.255.255.255
ether 00:18:8b:c3:93:d3
media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
Additional routing options:
.
Starting devd.
hw.acpi.cpu.cx_lowest:
C1
->
C1
Mounting NFS file systems:
.
ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/X11R6/lib
/usr/local/lib /usr/local/lib/compat/pkg /usr/local/lib/apache2
/usr/local/lib/compat /usr/local/lib/compat/pkg
/usr/local/lib/evolution/2.10 /usr/local/lib/mysql /usr/local/lib/nss
/usr/local/lib/pth
a.out ldconfig path: /usr/lib/aout /usr/lib/compat/aout
Clearing /tmp.
Creating and/or trimming log files:
.
Starting syslogd.
Initial i386 initialization:
.
Additional ABI support:
.
Starting local daemons:
.
Updating motd
.
Mounting late file systems:
.
Starting usbd.
Starting apache2.
[Fri Apr 13 09:44:05 2007] [warn] NameVirtualHost *:80 has no VirtualHosts
Starting mysql.
Starting exim.
Configuring syscons:
blanktime
.
Starting sshd.
Starting cron.
Local package initialization:
.
Additional TCP options:
.
Starting background file system checks in 60 seconds.
Fri Apr 13 09:44:08 EDT 2007
here is the DellM90 kernel config:
# $FreeBSD: src/sys/i386/conf/SMP,v 1.5.6.1 2005/09/18 03:37:58 scottl Exp $
include SMP
ident SMP-DellM90
# To make an SMP kernel, the next line is needed
options SMP # Symmetric MultiProcessor Kernel
device atapicam
options DEVICE_POLLING
#
TIA
_______________________________________________
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
