Thanks for the pointers and hints, I'm over that hurdle.
On 5/19/2012 5:28 PM, Warren Block wrote:
On Sat, 19 May 2012, Polytropon wrote:
3. The Xorg man page notes that ctrlaltbksp should cause it to
exit. However, it doesn't, and I had to use kill -TERM. Any hints on
why ctrlaltbksp doesn't
Gary Aitken writes:
Trying to set up a new box 9.0-RELEASE w/ X; has ATI Radeon HD5500 card.
X.org -config says:
Missing output drivers. Configuration failed.
I do not have this card/chip; I have a HD3300.
Having installed xf86-video-radeonhd-1.3.0.5, 'device radeon'
On Fri, 18 May 2012, Gary Aitken wrote:
Trying to set up a new box 9.0-RELEASE w/ X; has ATI Radeon HD5500 card.
X.org -config says:
Missing output drivers. Configuration failed.
From X.org I see one is supposed to get linux drivers from ati/amd,
but this info is over 2 years old and
Ok... I tried the xf86-video-radeonhd driver, to no avail.
Then tried xf86-video-ati-6.14.3 with marginally better results.
Using the ati driver, which reports that it works for the HD5500, Xorg
hobbles and writes a config file.
When it attempts to start, the log shows a boatload of
On Sat, 19 May 2012 11:59:03 -0600, Gary Aitken wrote:
1. Since the driver notes that Acceleration was disabled, but there are
no other errors, shouldn't the driver work in dumb frame buffer mode?
(Hoping to get something hobbling along...) Or is this the result of
the need for KMS and
On Sat, 19 May 2012, Polytropon wrote:
3. The Xorg man page notes that ctrlaltbksp should cause it to
exit. However, it doesn't, and I had to use kill -TERM. Any hints on
why ctrlaltbksp doesn't cause it to exit?
This is also a new default to _not_ work anymore. You have more
than two (if
Trying to set up a new box 9.0-RELEASE w/ X; has ATI Radeon HD5500 card.
X.org -config says:
Missing output drivers. Configuration failed.
From X.org I see one is supposed to get linux drivers from ati/amd,
but this info is over 2 years old and
U can always add additional Intel/3COM NIC, in case the builtin card is
not recognized.
--
Aftab Jahan Subedar
CEO/Software Engineer
Subedar Technologies Ltd
Soubedar Baag Bibir Bagicha #1
North Jatra Bari
Dhaka 1204
Bangladesh
http://www.DhakaStockExchangeGame.com
Frank Bonnet wrote:
El Mar 21 Nov 2006 09:57, Peter A. Giessel escribió:
man em:
*** QUOTE ***
AUTHORS
The em driver was written by Intel Corporation
[EMAIL PROTECTED].
*** END QUOTE ***
man bge:
*** QUOTE ***
AUTHORS
The bge driver was written by Bill Paul [EMAIL PROTECTED].
*** END QUOTE
Hi, I am new to freebsd. My question is for my motherboard and VGA CARD to work
with freebsd, should I use linux driver or unix driver? The freebsd I am
thinking to install is version 6.0.
Thanks
Jeffrey
___
freebsd-questions@freebsd.org mailing
Hi, I am new to freebsd. My question is for my motherboard and VGA CARD to work
with freebsd, should I use linux driver or unix driver? The freebsd I am
thinking to install is version 6.0.
Thanks
Jeffrey
___
freebsd-questions@freebsd.org mailing
Jeffrey Shi wrote:
Hi, I am new to freebsd. My question is for my
motherboard and VGA CARD to work with freebsd,
should I use linux driver or unix driver? The
freebsd I am thinking to install is version 6.0.
Thanks
Jeffrey
Hi, Jeffrey, and welcome to FreeBSD.
The answer to should I
At 05:09 PM 2/21/2006, Jeffrey Shi wrote:
Hi, I am new to freebsd. My question is for my motherboard and VGA
CARD to work with freebsd, should I use linux driver or unix
driver? The freebsd I am thinking to install is version 6.0.
What do you plan to run on this system? Any video card is
I'm having some major problems with the above card under 4.x ... namely,
I'm getting no errors reported *anywhere*, yet I'm gettting file system
hangs, and the server has been in production for a good while now ...
I'm looking at 3ware's web site, and the latest driver is 9.1.5.2, which,
Hi,
I am a new learner of FreeBSD. Now I am running FreeBSD4.8-release on my
computer. After I installed nvidia driver, I found that I can not install
graphics/gle, and got the following error:
configure: error: Cannot find required glut library
=== Script configure failed unexpectedly.
I hope I sent this question to the good posting. I work in a research
environnement and one of my project was to install different kinds of OS's
for testing. I am using emulators, so I don't need hundred of computers in
the lab. For now I have installed FreeBSD 2.2.0 and up in a producted
called
I hope I sent this question to the good posting. I work in a research
environnement and one of my project was to install different kinds of OS's
for testing. I am using emulators, so I don't need hundred of computers in
the lab. For now I have installed FreeBSD 2.2.0 and up in a producted
17 matches
Mail list logo