FreeBSD 5.4 and Sli 3114 sata controller broken?

[Evan Jones]

hey,

I have a Tyan s2882 mainboard with an integrated SLI 3114 SATA RAID 
controler on board. I have four 120gig sata drives attached to it. I can 
succefully build a RAID 0, 1 or 10 in the BIOS, but the created RAID 
dosent seem to show up in Freebsd. The drives get detected but I can 
only seem to use them as individual drives and not a raid array. I can 
successfully create a raid using ATA control but from what I understand 
that is a software RAID only.


Anyone know what is going on? I cant seem to find any info on Sli 3114 
support in freebsd.


Jul  7 14:06:56 greysrv syslogd: kernel boot file is /boot/kernel/kernel
Jul  7 14:06:56 greysrv kernel: Copyright (c) 1992-2005 The FreeBSD Project.
Jul  7 14:06:56 greysrv kernel: Copyright (c) 1979, 1980, 1983, 1986, 
1988, 1989, 1991, 1992, 1993, 1994
Jul  7 14:06:56 greysrv kernel: The Regents of the University of 
California. All rights reserved.
Jul  7 14:06:56 greysrv kernel: FreeBSD 5.4-RELEASE #1: Wed Jun 15 
23:13:01 EDT 2005
Jul  7 14:06:56 greysrv kernel: 
[EMAIL PROTECTED]:/usr/src/sys/amd64/compile/GREYSRV
Jul  7 14:06:56 greysrv kernel: Timecounter i8254 frequency 1193182 Hz 
quality 0
Jul  7 14:06:56 greysrv kernel: CPU: AMD Opteron(tm) Processor 242 
(1593.20-MHz K8-class CPU)
Jul  7 14:06:56 greysrv kernel: Origin = AuthenticAMD  Id = 0xf5a  
Stepping = 10
Jul  7 14:06:56 greysrv kernel: 
Features=0x78bfbffFPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2
Jul  7 14:06:56 greysrv kernel: AMD 
Features=0xe0500800SYSCALL,NX,MMX+,LM,3DNow+,3DNow

Jul  7 14:06:56 greysrv kernel: real memory  = 1073676288 (1023 MB)
Jul  7 14:06:56 greysrv kernel: avail memory = 1027469312 (979 MB)
Jul  7 14:06:56 greysrv kernel: ACPI APIC Table: A M I  OEMAPIC 
Jul  7 14:06:56 greysrv kernel: FreeBSD/SMP: Multiprocessor System 
Detected: 2 CPUs

Jul  7 14:06:56 greysrv kernel: cpu0 (BSP): APIC ID:  0
Jul  7 14:06:56 greysrv kernel: cpu1 (AP): APIC ID:  1
Jul  7 14:06:56 greysrv kernel: MADT: Forcing active-low polarity and 
level trigger for SCI
Jul  7 14:06:56 greysrv kernel: ioapic0 Version 1.1 irqs 0-23 on 
motherboard
Jul  7 14:06:56 greysrv kernel: ioapic1 Version 1.1 irqs 24-27 on 
motherboard
Jul  7 14:06:56 greysrv kernel: ioapic2 Version 1.1 irqs 28-31 on 
motherboard

Jul  7 14:06:56 greysrv kernel: acpi0: A M I OEMRSDT on motherboard
Jul  7 14:06:56 greysrv kernel: acpi0: Power Button (fixed)
Jul  7 14:06:56 greysrv kernel: Timecounter ACPI-fast frequency 
3579545 Hz quality 1000
Jul  7 14:06:56 greysrv kernel: acpi_timer0: 24-bit timer at 
3.579545MHz port 0x5008-0x500b on acpi0

Jul  7 14:06:56 greysrv kernel: cpu0: ACPI CPU on acpi0
Jul  7 14:06:56 greysrv kernel: acpi_throttle0: ACPI CPU Throttling on 
cpu0

Jul  7 14:06:56 greysrv kernel: cpu1: ACPI CPU on acpi0
Jul  7 14:06:56 greysrv kernel: pcib0: ACPI Host-PCI bridge port 
0xcf8-0xcff on acpi0

Jul  7 14:06:56 greysrv kernel: pci0: ACPI PCI bus on pcib0
Jul  7 14:06:56 greysrv kernel: pcib1: ACPI PCI-PCI bridge at device 
6.0 on pci0

Jul  7 14:06:56 greysrv kernel: pci3: ACPI PCI bus on pcib1
Jul  7 14:06:56 greysrv kernel: ohci0: OHCI (generic) USB controller 
mem 0xfeafc000-0xfeafcfff irq 19 at device 0.0 on pci3

Jul  7 14:06:56 greysrv kernel: usb0: OHCI version 1.0, legacy support
Jul  7 14:06:56 greysrv kernel: usb0: OHCI (generic) USB controller on 
ohci0

Jul  7 14:06:56 greysrv kernel: usb0: USB revision 1.0
Jul  7 14:06:56 greysrv kernel: uhub0: AMD OHCI root hub, class 9/0, rev 
1.00/1.00, addr 1
Jul  7 14:06:56 greysrv kernel: uhub0: 3 ports with 3 removable, self 
powered
Jul  7 14:06:56 greysrv kernel: ohci1: OHCI (generic) USB controller 
mem 0xfeafd000-0xfeafdfff irq 19 at device 0.1 on pci3

Jul  7 14:06:56 greysrv kernel: usb1: OHCI version 1.0, legacy support
Jul  7 14:06:56 greysrv kernel: usb1: OHCI (generic) USB controller on 
ohci1

Jul  7 14:06:56 greysrv kernel: usb1: USB revision 1.0
Jul  7 14:06:56 greysrv kernel: uhub1: AMD OHCI root hub, class 9/0, rev 
1.00/1.00, addr 1
Jul  7 14:06:56 greysrv kernel: uhub1: 3 ports with 3 removable, self 
powered
Jul  7 14:06:56 greysrv kernel: atapci0: SiI 3114 SATA150 controller 
port 
0xa800-0xa80f,0xac00-0xac03,0xb000-0xb007,0xb400-0xb403,0xbc00-0xbc07 
mem 0xfeafec00-0xfeafefff irq 19 at device 5.0 on pci3

Jul  7 14:06:56 greysrv kernel: ata2: channel #0 on atapci0
Jul  7 14:06:56 greysrv kernel: ata3: channel #1 on atapci0
Jul  7 14:06:56 greysrv kernel: ata4: channel #2 on atapci0
Jul  7 14:06:56 greysrv kernel: ata5: channel #3 on atapci0
Jul  7 14:06:56 greysrv kernel: pci3: display, VGA at device 6.0 (no 
driver attached)
Jul  7 14:06:56 greysrv kernel: fxp0: Intel 82551 Pro/100 Ethernet 
port 0xa400-0xa43f mem 0xfeaa-0xfeab,0xfeafb000-0xfeafbfff irq 
18 at device 8.0 on pci3

Jul  7 14:06:56 greysrv kernel: miibus0: MII bus on fxp0
Jul  7 14:06:56 greysrv kernel: inphy0: i82555 10/100 media interface 
on miibus0
Jul  7 14:06:56 greysrv kernel: inphy0:  

Re: FreeBSD 5.4 and Sli 3114 sata controller broken?

[Chad Leigh -- Shire.Net LLC]

On Jul 7, 2005, at 1:48 PM, Evan Jones wrote:


hey,

I have a Tyan s2882 mainboard with an integrated SLI 3114 SATA RAID  
controler on board. I have four 120gig sata drives attached to it.  
I can succefully build a RAID 0, 1 or 10 in the BIOS, but the  
created RAID dosent seem to show up in Freebsd. The drives get  
detected but I can only seem to use them as individual drives and  
not a raid array. I can successfully create a raid using ATA  
control but from what I understand that is a software RAID only.


Anyone know what is going on? I cant seem to find any info on Sli  
3114 support in freebsd.


That is actually a software raid as well with BIOS support for setup  
and configuration...  But the driver does all the RAID work at  
runtime...


I have the S2882 and could not get the Sil3114 working even with JBOS  
with 5.3 back when I was installing and going live and so I ended up  
with a RocketRAID 1820a from highpoint (and use it for JBOD only --  
my RAID is SCSI and Adaptec 2200S)


best
Chad
---
Chad Leigh -- Shire.Net LLC
Your Web App and Email hosting provider
[EMAIL PROTECTED]


___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]

RE: FreeBSD 5.4 and Sli 3114 sata controller broken?

[Gayn Winters]

 -Original Message-
 From: [EMAIL PROTECTED] 
 [mailto:[EMAIL PROTECTED] On Behalf Of Evan Jones
 Sent: Thursday, July 07, 2005 12:49 PM
 To: freebsd-questions@freebsd.org
 Subject: FreeBSD 5.4 and Sli 3114 sata controller broken?
 
 I have a Tyan s2882 mainboard with an integrated SLI 3114 SATA RAID 
 controler on board. I have four 120gig sata drives attached 
 to it. I can 
 succefully build a RAID 0, 1 or 10 in the BIOS, but the created RAID 
 dosent seem to show up in Freebsd. The drives get detected but I can 
 only seem to use them as individual drives and not a raid 
 array. I can 
 successfully create a raid using ATA control but from what I 
 understand 
 that is a software RAID only.
 
 Anyone know what is going on? I cant seem to find any info on 
 Sli 3114 
 support in freebsd.
 
My guess is that you are going to have to wait for the mk III patches
in the ata controller driver that are coming in 6.0.  Those of us using
the Intel ICH5 and ICH6 controllers (search for ICH6 in the mail
archives for questions, hackers, and hardware) are in the same boat.  To
learn about mk III (or mk3) read Soren Schmidt's March progress report
on the ata driver. Man ata shows that the SiI 3114 is supported, at
least as a set of disks.

-gayn


___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]