On Wed, Aug 24, 2005 at 06:55:57PM -0400, Zac Berkowitz wrote:
I'm giving FreeBSD a go on my laptop, but I'm running into problems
straight off the 5.4-STABLE installer. At first it would hang without an
error. After I disabled power management in the bios I got a bit further
- now it crashes with a panic:
-
pcib0: intel 82443BX (440 BX) host to PCI bridge pcibus 0 on motherboard
pir0: PCI Interrupt Routing Table: 8 Entries on motherboard
pci0: PCI bus on pcib0
Fatal trap 12: page fault while in kernel mode
fault virtual address = 0xeb871
fault code = supervisor read, page not present
instruction pointer = 0x8 :0xc00eb757
stack pointer = 0x10 :0xc1020a0
frame pointer = 0x10 :0xc1020a0
code segment = base 0x0, limit 0xf, type 0x1b
= DPL 0, pres 1, def32 1, IOPL = 0
processor eflags = interrupt enabled, resume, IOPL = 0
current process = 0
trap number=12
panic: page fault
Some googling with the fault virtual address turned up a few pages, but
none in english and seemingly none coming to a solution. lspci -v in linux
gives me
-
:00:01.0 PCI bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge
(rev 03) (prog-if 00 [Normal decode])
Flags: bus master, 66MHz, medium devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 8000-9fff
Memory behind bridge: d800-dfff
Prefetchable memory behind bridge: d000-d7ff
-
Any ideas? Usually my *NIX give me panics /after/ I get through installing
them : p
I've had the same problem on an old laptop. I was told to try older
releases (tried 4.11 and 5.4). I haven't gotten around to it, but that's
somewhere to start.
Cheers,
Jason
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]