>
> Hi Jerry,
>
> Jerry McAllister wrote:
> >
> > NOTE: If you run disklabel and do not use the "-r" switch, then
> > what you are seeing is the socalled 'in-cure' version of the disklabel
> > and if no FreeBSD label has been written on the disk, the system will
> > make up some default stuff.
Hi Jerry,
Jerry McAllister wrote:
NOTE: If you run disklabel and do not use the "-r" switch, then
what you are seeing is the socalled 'in-cure' version of the disklabel
and if no FreeBSD label has been written on the disk, the system will
make up some default stuff. So, just seing # /dev/ad6
> Hi!
> > > If the drive worked in the 4.7 machine, what was the fstab entry there?
> > >
> > I cant recall the fstab entry but the drive was as Master on the
> > secondary IDE channel and had only one partition using all diskspace.
> > In the 4.9 machine the drive is on a DMA-66-Controller. Unde
Hi!
> > If the drive worked in the 4.7 machine, what was the fstab entry there?
> >
> I cant recall the fstab entry but the drive was as Master on the
> secondary IDE channel and had only one partition using all diskspace.
>
> In the 4.9 machine the drive is on a DMA-66-Controller. Under Win200
Toomas Aas wrote:
Hello!
Date: Fri, 21 Nov 2003 10:53:06 +0100
From: Robert Neumann <[EMAIL PROTECTED]>
this is the problem:
I had a machine running FreeBSD 4.7-Stable. There I added a 80GB
harddisk. This harddrive I wanted to install on my other machine running
FreeBSD 4.9
Hello!
> Date: Fri, 21 Nov 2003 10:53:06 +0100
> From: Robert Neumann <[EMAIL PROTECTED]>
>
> this is the problem:
> I had a machine running FreeBSD 4.7-Stable. There I added a 80GB
> harddisk. This harddrive I wanted to install on my other machine running
> FreeBSD 4.9-Release
Robert Neumann <[EMAIL PROTECTED]> writes:
> this is the problem:
> I had a machine running FreeBSD 4.7-Stable. There I added a 80GB
> harddisk. This harddrive I wanted to install on my other machine
> running FreeBSD 4.9-Release. This disk is ad6 so I added
>
> /dev/ad6/storage
Hello there,
this is the problem:
I had a machine running FreeBSD 4.7-Stable. There I added a 80GB
harddisk. This harddrive I wanted to install on my other machine running
FreeBSD 4.9-Release. This disk is ad6 so I added
/dev/ad6 /storage ufs rw 2 2
to fstab and rebooted.
While booting the k