RE: LTO3 tape drive not detected

2011-06-23 Thread a . smith
Seems in theory that LTO 3 should work ok based on this forum post: http://forums.freebsd.org/showthread.php?t=8042 ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any ma

Re: LTO3 tape drive not detected

2011-06-23 Thread Julian H. Stacey
Adam Vande More wrote: > On Thu, Jun 23, 2011 at 9:35 AM, Joe in MPLS wrote: > > > The system sees the SCSI controller as mpt0, and it seems to know there's > > something at SCSI ID 4, but I get an "AutoSense Failed" for hba/id/lun 0:4:0 > > at boot and subsequent camcontrol rescans. > > > > I ch

Re: LTO3 tape drive not detected

2011-06-23 Thread Polytropon
On Thu, 23 Jun 2011 09:35:10 -0500, Joe in MPLS wrote: > > I have FreeBSD 8.2-RELEASE running on an HP DL360 G5. I recently added > an (HP branded) LSI Logic single channel SCSI 320 card and attached an > HP Ultrium 920 LTO3 tape drive. > > The system sees the SCSI controller as mpt0, and it se

Re: LTO3 tape drive not detected

2011-06-23 Thread Adam Vande More
On Thu, Jun 23, 2011 at 9:35 AM, Joe in MPLS wrote: > The system sees the SCSI controller as mpt0, and it seems to know there's > something at SCSI ID 4, but I get an "AutoSense Failed" for hba/id/lun 0:4:0 > at boot and subsequent camcontrol rescans. > > I checked the supported hardware doc for

LTO3 tape drive not detected

2011-06-23 Thread Joe in MPLS
I have FreeBSD 8.2-RELEASE running on an HP DL360 G5. I recently added an (HP branded) LSI Logic single channel SCSI 320 card and attached an HP Ultrium 920 LTO3 tape drive. The system sees the SCSI controller as mpt0, and it seems to know there's something at SCSI ID 4, but I get an "AutoSe