Re: Problems with IPv6 CARP Interface in PF

2009-05-27 Thread Matthew Seaman

Michael K. Smith - Adhost wrote:

Hello:

I'm having reachability problems with a CARP interface set up on two 7.1
boxes with an uplink to Cisco routers.  However, the inside CARP address
on the same set of PF boxes are reachable with no trouble.  Here's the
config.

Cisco   Cisco
   HSRP Gateway
|
   CARP Interface 1
PF Box   PF Box
   CARP Interface 2
|
  Server

When I try to ping CARP Interface 1 above from the Internet, I get no
response.  When I ping the CARP Interface 2, which has a route set from
the Cisco's to CARP Interface 1, it works.  Here's what I see in my
logs.

00:38:45.763975 IP6 fe80::203:6cff:fef9:2c00 > ff02::1:ff00:7: ICMP6,
neighbor solicitation, who has 2001:4970:::7, length 32

... with no response.

Here is the ifconfig from one box.

carp0: flags=49 metric 0 mtu 1500
inet6 2001:4970:::6 prefixlen 64
inet6 2001:4970:::7 prefixlen 64
carp: MASTER vhid 1 advbase 1 advskew 100
carp1: flags=49 metric 0 mtu 1500
inet6 2001:4970::::1 prefixlen 64
carp: MASTER vhid 2 advbase 1 advskew 100

and the other shows appropriately as "BACKUP".  There is no change if I
run with just one PF box.

Any help would be greatly appreciated.


* Do you have PF rulesets written to take account of the CARP interfaces
 and IPs correctly?  You can say things like:

   pass in on carp0 proto icmp6 from any to { carp0 carp1 } keep state 


 You may not need carp specific rules if the carp IP is from the same
 network as the IPs on the front interfaces of those PF boxes, and your
 rules are written to filter traffic crossing those interfaces by network
 (say) rather than by specific IP numbers.  

 A good debugging trick is to make sure that all pf rules that block 
 packets have a log clause, and then tcpdump pflog0 while doing your

 connectivity tests.  Immediately tells you if its PF blocking things
 rather than some other problem.

* I'm sure this is far too obvious, but in case you've tripped over this
 one accidentally:

   pass ... proto inet 

 only allows IPv4.  Either drop the proto clause altogether, or add explicit
 'proto inet6' rules.

* Have you tried tcpdump on the various physical and carp interfaces on those
 machines while trying to ping?  Probably the most interesting data to be 
gleaned
 from that is if there are ping responses being sent, and what IP they originate
 from.

Cheers,

Matthew

--
Dr Matthew J Seaman MA, D.Phil.   7 Priory Courtyard
 Flat 3
PGP: http://www.infracaninophile.co.uk/pgpkey Ramsgate
 Kent, CT11 9PW



signature.asc
Description: OpenPGP digital signature


Problems with IPv6 CARP Interface in PF

2009-05-27 Thread Michael K. Smith - Adhost
Hello:

I'm having reachability problems with a CARP interface set up on two 7.1
boxes with an uplink to Cisco routers.  However, the inside CARP address
on the same set of PF boxes are reachable with no trouble.  Here's the
config.

Cisco   Cisco
   HSRP Gateway
|
   CARP Interface 1
PF Box   PF Box
   CARP Interface 2
|
  Server

When I try to ping CARP Interface 1 above from the Internet, I get no
response.  When I ping the CARP Interface 2, which has a route set from
the Cisco's to CARP Interface 1, it works.  Here's what I see in my
logs.

00:38:45.763975 IP6 fe80::203:6cff:fef9:2c00 > ff02::1:ff00:7: ICMP6,
neighbor solicitation, who has 2001:4970:::7, length 32

... with no response.

Here is the ifconfig from one box.

carp0: flags=49 metric 0 mtu 1500
inet6 2001:4970:::6 prefixlen 64
inet6 2001:4970:::7 prefixlen 64
carp: MASTER vhid 1 advbase 1 advskew 100
carp1: flags=49 metric 0 mtu 1500
inet6 2001:4970::::1 prefixlen 64
carp: MASTER vhid 2 advbase 1 advskew 100

and the other shows appropriately as "BACKUP".  There is no change if I
run with just one PF box.

Any help would be greatly appreciated.

Regards,

Mike
--
Michael K. Smith - CISSP, GISP
Chief Technical Officer - Adhost Internet LLC mksm...@adhost.com
w: +1 (206) 404-9500 f: +1 (206) 404-9050
PGP: B49A DDF5 8611 27F3  08B9 84BB E61E 38C0 (Key ID: 0x9A96777D)



___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"